Aero User Guide
1MORE Aero 空间音频降噪耳机 用户指南
ES903www.1more.com
96*84 mm
3
4
5 6
7 8
× 1 × 1 (XS / S / L) × 1
1
1MORE Aero
2
XL
L
20% - 80%
100%=
1h
80%
>
-
<20%
M
S
1.5s
100%=
2h
The default setting of the headphones is “ANC Off”, long press the touch control area of the
earbuds to switch between “ANC-Off”, “ANC-Strong" and “Pass-through".
“ANC-Mild”, ”WNR (Wind Noise Resistance), “ANC-Adaptive” options are available via 1MORE
MUSIC APP.
Once the Listening mode has been set up in the APP, they will be memorized by the headphones
allowing you to switch modes based on your settings.
Spatial Audio Extra Functions
1. If only one earbud can be connected to the device, please put the two earbuds back into the
case and triple tap the pairing button, then click "1MORE Aero" in the device pairing list to
connect to your device.
2. Restore Factory Settings: Put both Left and Right earbuds into the case, triple tap the pairing
button, the earbuds will initiate pairing to each other again.
3. Clear The Pairing Records: Put both Left and Right earbuds into the case, press and hold the
pairing button for 8 seconds, the pairing records will be cleared.
4. OTA Firmware Update: It can be synchronously upgraded via the 1MORE MUSIC APP while the
Left and Right earbuds are connected to each other with at least 50% battery.
* Functions of the 1MORE MUSIC APP may vary with different devices or operating systems. For
more details, please contact our customer service.
Answer/Hang up: Double tap
* Above functions are available for either earbud in individual or stereo mode. Custom setup is
available on the APP.
* To decline a call, control the music playback or volume adjustment, please operate it on APP or
the connected device.
* Above functions may vary with different devices.
With in-inbuilt head-tracking technology, the Spatial Audio function creates a new level of
immersed listening. It is compatible with different OS and devices without limitation of audio
formats.
Available via APP.
Ai Loudness retains the full range of music at all playback volumes. Bass and treble sounds are
preserved even at low volumes.
Available via APP.
Play/Pause: Double tap
Ai Loudness
制造商:万魔声学股份有限公司
地址:深圳市南山区留仙大道 3333 号塘朗城 A 座 35 楼
服务热线:400-992-0909
Manufacturer: Tiinlab Corporation
Add: No. 3333, Liuxian Avenue, Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China
中国内地用户可扫描二维码下载 1MORE MUSIC APP 进行
产品升级,体验更完整的功能。
*说明书中的 APP 界面仅为示意,请以实物为准。
中國内地以外的用戶可下載1MORE MUSIC APP進行產品升級,
體驗更完整的功能。
* 說明書中的 APP 界面僅為示意,請以實物為準。
For users outside mainland China, please download
the 1MORE MUSIC APP for product upgrades and
additional features.
* APP Ul in user guide may vary and for reference only,
please refer to Ul on device.
1MORE MUSIC APP
FAQ
1. Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30
minutes.
2. Why the headphones cannot connect to my cellphone, or take a long time to connect?
1If headphones cannot pair normally when power on. Open the case, triple tap the pairing button
to initial searching for Left & Right pairing, and then click "1MORE Neo" in the device pairing list.
2) To pair the headphones to a new device, simply place them into the charging case and triple tap
the pairing button. Then click "1MORE Neo" in the new device pairing list to connect.
3. Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Media Audio" option is on.
4. Why there is no sound from the headphones while making phone calls after successfully
connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Phone Audio" option is on.
5. Why the Bluetooth connection is not stable and causes some interruptions?
1) Try shortening the distance between your headphones and device. Avoid solid barriers in between.
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS.
3) Please make sure the Bluetooth antenna of your device is not blocked.
WEEE
Warning
FCC
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire,
explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas; and A battery subjected to extremely low air
pressure that may result in an explosion or the leakage of flammable liquid or gas.
The symbol indicates DC voltage.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
6. Why some control functions do not match those in the manual while using third party music/video
player Apps?
Your operating system and the third party music/video player apps may have different settings for
the control functions. We recommend that you use the music/video player apps that your device
has originally provided.
* For more detailed product FAQs, please visit the product support section under www.1more.com
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averagedover one gram of tissue. Device typesES903
has also been tested against this SAR limit.
NOTE: This equipment has been tested and found to comply with the limits for aClass B digital
device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable
protection against harmful interference in aresidential installation. This equipment generates uses
and can radiate radiofrequency energy and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If thisequipment does cause
harmful interference to radio or television reception, whichcan be determined by turning the
equipment off and on, the user is encouraged totry to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which thereceiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
The Qi logo is a registered trademark of the Wireless Power Consortium.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:(1)this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conformeavec Industrie CanadaRSS exemptes de licencestandard(s).
Son fonctionnement est soumisaux deuxconditions suivantes:(1)cet appareil ne peutpas
provoquer d'interférences,et(2) cet appareildoit accepter toute interférence,y compris celles
pouvantcauser un mauvais fonctionnementde l'appareil.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device has been tested for compliance with IC SAR values at a typical operating near the body.
To ensure that RF exposure levels below the levels tested, use accessories with this equipment to
maintain a minimum separation distance of 0cm between the body of the user and the device.
These accessories should not contain metallic components. It is possible that the accessories used
close to the body that do not meet these requirements are not consistent with the SAR limits and
it is advisable to avoid using them.
Ce dispositif a été testé pour la conformité avec les valeurs SAR à un fonctionnement typique près
du corps . Pour assurer que les niveaux d'exposition aux radiofréquences en deçà des niveaux
testés , utiliser des accessoires avec cet équipement pour maintenir une distance de séparation
minimale de 0cm entre le corps de l'utilisateur et l'appareil. Ces accessoires ne doivent pas contenir
des composants métalliques . Il est possible que les accessoires utilisés près du corps qui ne
répondent pas à ces exigences ne sont pas compatibles avec les limites SAR et il est conseillé
d'éviter de les utiliser.
1MORE (1) Year Limited Warranty
Limitations:
• This limited warranty does not cover the failure of the product resulting from improper
installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or
environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential
damage to other components or premises which may result for any reason from the failure of the
product.
• This limited warranty is null and void for products not used in accordance with 1MORE’s
instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for
products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your
satisfaction. If you would like more details on this product or any of our other products, please
visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE
will treat you like one.
Tips
Safety Information
1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above
113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from
working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Adult supervision is required for children of age 6 and under.
1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before first use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge
them. This will improve battery capacity.
4. Only use chargers that are FCC (Federal Communications Commission) approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of
the product.
1MORE warrants to the original retail purchaser that this product is to be free from defective materials
and workmanship for a period of one year from the date of purchase if it is properly used and
maintained. If this product proves defective in either material or workmanship, 1MORE, at its option, will
(a) repair the product with new or refurbished parts, or (b) replace the product with an equivalent new
or refurbished product, at no charge for parts or labor. If the product model is no longer available and
cannot be repaired effectively or replaced with an identical model, 1MORE at its sole option may
replace the unit with a current model of equal or greater value. In some cases, modification to the
mounting surface may be required where a new model is substituted. 1MORE assumes no responsibility
or liability for such modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF
THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER
SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT
WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not limited to a receipt or
sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.
英文
Name: Wireless Earphones
Model: ES903
Single Earbud Weight: 4.9 g
Case Weight: 45.2 g
Gross Weight: 55.1 g
Earbuds Size: 39.42 x 20.33 x 24.36 mm
Case Size: 61.99 x 56.40 x 25.5 mm
Single Earbud Battery Capacity: 40 mAh
Case Battery Capacity: 450 mAh
Earbuds Charging Time: 1 hour
Case Charging Time: 2 hours
Playtime (ANC Off)
Earbuds Fully Charged: 7 hours
Case and Earbuds Fully Charged: 28 hours
Playtime (ANC On)
Earbuds Fully Charged: 5 hours
Case and Earbuds Fully Charged: 20 hours
Speaker Impedance: 32 Ω
Bluetooth Range: 10 m
Bluetooth Version: Bluetooth® 5.2
Bluetooth Protocol: HFP / A2DP / AVRCP
Input: 5 V 0.7 A
Working Temperature: 0 ~ 45
Frequency Range: 2.400 GHz ~ 2.4835 GHz
The specifications are acquired from laboratory tested data.
* The playback time, tested under the laboratory condition of AAC format and 50% volume, may
vary with different device setting, environments, usage and other factors.
Tiinlab Corporation hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and all other
applicable EU directive requirements.The full text of the EU declaration of conformity is
available at the following internet address:www.1more.com
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead,
you should protect human health and the environment by handing over your waste equipment
to a designated collection point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health. Please
contact the installer or local authorities for more information about the location as well as
terms and conditions of such collection points.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
Hereby, Tiinlab Corporation declares that the radio equipment type ES903 is in compliance
with Radio Equipment Regulations 2017. The full text of the UKCA declaration ofconformity
is available at the following internet address:www.1more.com
FCC ID: 2ASDIES903L
FCC ID: 2ASDIES903R
CMIIT ID: 2022DP7790
IC: 24662-ES903L
IC: 24662-ES903R
HVIN: ES903L
HVIN: ES903R
1ANC Off ANC-Strong Pass-through
23
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN