1MORE ComfoBuds Z True Wireless In-Ear Headphones ユーザーガイド

ComfoBuds Z True Wireless In-Ear Headphones
1MORE
ブランド
1MORE
モデル
ComfoBuds Z True Wireless In-Ear Headphones
タイプ
ユーザーガイド
舒眠旋律
产品性能故障表
性能故障
名称
1MORE ComfoBuds Z
真无线耳机
蓝牙耳机听不到声音
无法为蓝牙耳机充电
售后产品保修说明
1MORE ComfoBuds Z 真无线耳机产品售后服务严格依照《中华人民共和国消费者权益保护法》、
《中华人民共和国产品质量法》实行产品售后服务，服务内容如下：
在产品自购买之日起一年的免费保修期内，您可以依照本规定享受退货、换货、维修的权利，修理、
换货、退货应当凭相关订单号或发票办理。
1、7 日无理由的退货（电商渠道），由用户承担物流费用；
2、免费维修或以换代修的产品的保修期仍然按原始产品的购买日期计算一年免费保修期。
3、本产品出现《产品性能故障表》所列性能故障的情况，经检测确定后，可以免费享受如下服务：
服务政策服务类型
退货
换货
维修
自签收次日起 7 天内产品质量原因退货
自签收次日起 15 天内产品质量原因换货
自签收次日起 1 年内产品质量原因维修
非保修条例
1. 未经授权的维修、误用、碰撞、疏忽、滥用、进液、事故、改动、不正确的使用非本产品配件，
或撕毁、涂改标贴、防伪标记；
2. 已超过三包有效期；
3. 因不可抗力造成的损坏；
4. 不符合《产品性能故障表》所列性能故障的情况；
5. 因人为原因导致本产品及其配件产生《产品性能故障表》所列性能故障。
更多服务可登录 1MORE 官方网站 www.1more.com 点击“服务”项
或咨询服务热线：400-992-0909
页面中点击“舒眠旋律”，可进入对应舒眠歌单界面。
耳机与 1MORE MUSIC APP 连接后，进入 1MORE ComfoBuds Z 真无线耳机界面，
可自选切换“音乐”和“舒眠”音质风格。
本耳机不具备通话功能，其播放功能请在所连接的手机等设备端进行相应操作。
聆听舒眠歌单需在 1MORE MUSIC APP 中进行相应操作。
点击“＋”添加想要聆听的音乐，即可同步下载至耳机中进行聆听。
点击曲目界面中的计时器图标，可自行设定播放时长。
* 舒眠旋律的音量调节，仅支持在 APP 中该曲目界面中进行操作。
耳机外壳
电路板及组件
电池
耳套
配件
充电线
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(CrVI)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
有害物质
产品中有害物质的名称及含量
环保支持
提示
舒眠旋律
APP 切换音质风格
1. 使用产品前请仔细阅读本使用说明书并请妥善保管；
2. 首次使用，请先将本产品充满电；
3. 如果产品长期（超过 3 个月）不使用，请对其充电；
4. 必须选择正规厂家生产的经过第三方权威机构认证的充电线和电源适配器；
5. 在干燥环境佩戴，静电可能会触到耳朵产生瞬间发麻的感觉，这与产品质量性能无关。
警告
1. 请勿以任何理由拆除或维修改装耳机，否则可能会导致起火、电子击穿甚至彻底损坏本产品；
2. 请勿将设备置于温度过低或过高（0℃ 以下或 45℃ 以上）的环境中；
3. 请勿在雷暴天气下使用该设备，雷暴可导致设备工作不正常，并增加触电的危险；
4. 请勿用油及其它挥发性液体擦拭本产品；
5. 请勿连续长时间佩戴耳机（超过 6 小时），尤其不要长时间开最大音量听耳机；
6. 请勿在骑车或开车的状态下佩戴耳机，因为这种行为在某些国家属于违法行为；
7. 6 岁以下儿童请在成人监护下使用耳机；
8. 如佩戴耳机后感到耳朵不适，建议咨询耳科医生是否适合佩戴入耳式耳机；
9. 本产品内含锂电池，禁止拆解、撞击、挤压或投入火中。若出现鼓胀，请勿使用。请勿置于
高温环境中。
扫描、关注1MORE官方微信公众号
欢迎访问 1MORE 社区：bbs.1more.com
登录 www.1more.com，注册成为 1MORE 会员，
更多精彩在等你。
型号： EH601
单耳机重量：2.7 g
充电盒重量：34 g
整机重量：39.4 g
耳机尺寸：24 × 9.2 × 14.2 mm
充电盒尺寸：60 × 30 × 38.5 mm
单耳机电池容量：30 mAh
充电盒电池容量：410 mAh
耳机充电时间：85 分钟
充电盒充电时间：80 分钟
使用时长
* 单耳满电状态
BLE 本地播放：约 3.5 小时*
蓝牙播放：约 2.5 小时*
* 耳机＋充电盒满电状态
BLE 本地播放：约 14 小时*
蓝牙播放：约 10 小时*
喇叭阻抗：22 Ω
通讯距离：10 米（在空旷环境下）
蓝牙规范：Bluetooth® 5.0
蓝牙协议：A2DP / AVRCP / BLE
输入：5V 1A
频率波段：2.400 GHz ~ 2.4835 GHz
规格参数为实验室测试数据。
* 播放时长为 AAC 格式、50% 音量条件下的实验室测算数据，依设备设置、环境、使用情况及诸
多其他因素可能有所差异。
制造商：万魔声学科技有限公司
地址：深圳市南山区桃源街道田寮工业 A 区田寮大厦 1403
执行标准：GB8898
○:表示该有害物质在该部件所有均质材料中的含量 GB/T 26572 规定的限量要求以下。
本表格依据 SJ/T 11364 的规定编制。
:表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
FAQ
1、如何确定耳机已充满电？
将耳机放入充电盒内，耳机状态指示灯长亮即表示耳机满电。
2、耳机无法开机，该如何解决？
先确保耳机是否有电，如无电，请充电 30 分钟以上再开机。
3、耳机与手机蓝牙无法正常连接，连接时间长，该如何解决？
可将左、右耳机放入充电盒内，长按配对按键 3 秒，待手机蓝牙搜到耳机设备名后，点击配对
连接。
4、耳机无法通话，该如何解决？
耳机不具有麦克风通话功能，不支持语音通话功能。
5、蓝牙连接不稳定，出现断续情况，该如何解决？
1） 请尽量缩短设备和耳机之间的距离，避免实体障碍物；
2） 请远离强干扰源环境（Wi-Fi / GPRS 等）；
3） 请确保手机天线不被遮挡。
6、在 1MORE MUSIC APP 播放舒眠旋律时，不能用手机音量键调节音量大小，该如何解决？
耳机内置的舒眠旋律是内置在耳机闪存中的，只可通过 APP 歌曲界面中的音量按钮来调节音量。
7、耳机与手机连接 超距后蓝牙断开，再次返回耳机可接收蓝牙信号的范围后，耳机无法回连，
该如何解决？
在手机端蓝牙连接界面，手动点击耳机设备名回连。
8、耳机佩戴后感觉耳朵有异物感、胀痛，该如何解决？
出现异物感或胀痛，是由于耳套的大小和个人耳道大小不匹配造成，建议更换较小的耳套使用。
* 更多更细节的产品实际使用问题解析，请登录 1MORE 官方网站“技术支持”项进行查询。
* 1MORE MUSIC APP 的所有功能，在不同手机及操作系统上使用或有不同，
请联系客服了解更多详情。
材质：80G书纸
尺寸：98*86mm
封面
封底
1MORE ComfoBuds Z 真无线耳机 用户指南
1MORE ComfoBuds Z User Guide
EH601
中国内地用户可扫描二维码，下载 1MORE MUSIC APP
进行产品升级，体验更完整的功能。 中國內地以外的用戶可下載 1MORE MUSIC APP
進行產品升級，體驗更完整的功能。
For users outside mainland China, please download the
1MORE MUSIC APP for product upgrades and additional features.
制造商：万魔声学科技有限公司
地址：深圳市南山区桃源街道田寮工业 A 区田寮大厦 1403
服务热线：400-992-0909
Manufacturer: Tiinlab Acoustic Technology Limited
Add: Tianliao Building 1403, Zone A Tianliao Industrial Park,
Taoyuan Str., Nanshan Dist., Shenzhen, P.R. China
Made in China
2ASDIEH601 2020DP12120
耳机 × 1 副 + 充电盒 × 1 Type-C 充电线 × 1
硅胶耳塞套
充电触点
耳机状态 LED 指示灯 配对按钮
充电盒 LED 指示灯
充电盒
耳机
硅胶耳塞套
XS / S / M / L
硅胶耳塞套 × 3 副
(XS/S/L)
使用说明书 × 1
开机：在充电盒有电的状态下，
从盒中取出耳机，耳机即开机。
一次充满需约 80 分钟。
* 上述功能适用于单、双模式使用时的任一耳机。 * 上述功能适用于单、双模式使用时的任一耳机。
关机：将耳机放入对应的充电
槽内，关闭盒盖，耳机即关机
充电。
保修卡 × 1 1MORE MUSIC APP
音乐卡 × 1
在充电盒有电的状态下，如左、右耳机置于
盒内，打开盒盖，左、右耳机即自动配对。
如左、右耳机在充电盒外，3 分钟未能左、
右配对，耳机即休眠，将其放入有电的充电
盒内，左、右耳机即自动配对。
首次使用，开机后耳机进入搜索模式，耳机状态指示白
灯快闪。如 2 分钟后未连接到设备，耳机即休眠。
* 已连接过设备的耳机，将自动与该设备进行蓝牙配对。
如需与新设备连接，开机且非播放状态，将左、右耳机
放回盒内，长按配对按钮 3 秒，耳机将与新设备进行蓝
牙配对。
充电过程中，充电盒 LED
灯将以不同颜色显示电量状
态：低电量时红色长亮，中
等电量时橙色长亮，满电时
绿色长亮。
请将耳机准确放入盒中位
置。充电过程中，耳机状
态指示白灯慢闪。
一次充满需约 85 分钟，
当充满电时，耳机状态
指示白灯长亮。
查看充电盒电量：当充电盒的电量不足以
供两个耳机充一次电时，充电盒的 LED
红灯将长亮 10 秒。
把耳机放入盒中，如充电盒 LED 红灯
慢闪 10 次（间隔 1 秒），表示充电盒
电量低，请先为其充电。
使用 Type-C 充电线给充电盒充电
使用充电盒给耳机充电
1. 如开机时，左、右耳机无法正常配对，可放入盒中，打开盒盖，长按配对按钮
3 秒，同时耳机状态 LED 白灯快闪，左、右耳机即进行配对。
2. 单耳连接模式： 将左、右耳机放入充电盒中，双击配对按钮，进入单耳配对
模式，此时左、右耳机可分别连接不同的手机同时使用。
3. 清除与设备的连接记录：
长按充电盒配对按钮 3 秒，可清除耳机与设备的连接记录。
SC
SC
SC
SC
SC
SC
SC
SC
SC
SC
SC
SC
SC
SC
SC
红色：熔岩红
PANTONE
Bright Red C
RGB 255,40,25
黑色：钛黑
PANTONE
My Soul Black 6C
RGB 255,40,25
舒眠旋律
音质风格
音乐风格音乐风格
1MORE ComfoBuds Z 真无线耳机
舒眠旋律
音质风格
音乐风格音乐风格
1MORE ComfoBuds Z 真无线耳机
舒眠旋律
音质风格
音乐风格音乐风格
1MORE ComfoBuds Z 真无线耳机
In The Box
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your
satisfaction. If you would like more details on this product or any of our other products, please visit
us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will
treat you like one.
1MORE Inc., (“1MORE”) warrants to the original retail purchaser that this product is to be free from
defective materials and workmanship for a period of one year from the date of purchase if it is
properly used and maintained. If this product proves defective in either material or workmanship,
1MORE, at its option, will (a) repair the product with new or refurbished parts, or (b) replace the
product with an equivalent new or refurbished product, at no charge for parts or labor. If the
product model is no longer available and cannot be repaired effectively or replaced with an
identical model, 1MORE at its sole option may replace the unit with a current model of equal or
greater value. In some cases, modication to the mounting surface may be required where a new
model is substituted. 1MORE assumes no responsibility or liability for such modication. TO
OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE
RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE
PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN
EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not limited to a receipt or
sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.
Limitations:
• This limited warranty does not cover the failure of the product resulting from improper installation,
misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental
deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or
consequential damage to other components or premises which may result for any reason from the
failure of the product.
• This limited warranty is null and void for products not used in accordance with 1MORE’s
instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for
products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.
If headphones cannot pair normally when they power on. Put both headphones into the case,
press and hold the pairing button in the case for 3 seconds and the headphone status LEDs
ash in white, and then headphones will start searching for Left & Right pairing.
For single mode: put Left and Right earbuds in the case, double-click the pairing button and
enter the separate pairing for single earbud. Then the Left and Right earbuds can be connected
to different cellphones.
To unpair the device: Press and hold the pairing button in the case for 3 seconds to disconnect
the earbuds and the device.
To connect to your device during rst use, turn the
headphones on to enter pairing mode, the LEDs for
headphone status will ash in white. Headphones will
enter sleep mode if not paired to a device within 2
minutes.
* After rst successful pairing, headphones will
automatically connect to your device.
To skip previously paired device and pair with a new
one, put headphones back into the case, press and
hold the pairing button for 3 seconds when powered
on (no playback) to re-enter pairing mode.
Tips
Extra Functions
We Appreciate Your Business
1MORE (1) Year Limited Warranty
Model: EH601
Headphone Weight: 2.7 g
Case Weight: 34 g
Product Weight: 39.4 g
Headphone Size: 24 × 9.2 × 14.2 mm
Case Size: 60 × 30 × 38.5 mm
Headphone Battery Capacity: 30 mAh
Case Battery Capacity: 410 mAh
Headphone Charging Time: 85 mins
Case Charging Time: 80 mins
Battery Life
* Headphone Fully Charged
BLE Local Playtime: approx. 3.5 h
Bluetooth Playtime: approx. 2.5 h*
* Headphones + Case Fully Charged
BLE Local Playtime: approx. 14 h*
Bluetooth Playtime: approx. 10 h*
Impedance: 22 Ω
Wireless Range: 10 m
Bluetooth: Bluetooth
®
5.0
Bluetooth Protocol: A2DP / AVRCP / BLE
Input: 5V 1A
Frequency Band: 2.400 GHz ~ 2.4835 GHz
Manufacturer: Tiinlab Acoustic Technology Limited
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan Str.,
Nanshan Dist., Shenzhen, P.R. China
Product information can be found at www.1more.com
The specifications are acquired from laboratory tested data.
* The playtime, tested under the laboratory condition of AAC format and 50% volume, may vary
with different device setting, environments, usage and other factors.
1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before rst use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge
them. This will improve battery capacity.
4. Only use charging cables and adapters that are FCC (Federal Communications Commission)
approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of the
product.
Safety Information
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol must not be
disposed of with normal household wastage, it must be collected and disposed of separately to
protect the environment.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, re or the like.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
FAQ
1. How to make sure the headphones have been fully charged?
Put the headphones into the charging case, if the headphone stutus LEDs are glowing this means
they have been fully charged.
2. Why won't headphones turn on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.
3. Why won’t the headphones connect to my cellphone, or take a long time to connect?
Put both buds back into the charging case, then press and hold the pairing button for 3 seconds, click
the device name in your settings, they should now pair correctly to the phone.
4. Why won’t the headphones make phone calls?
The headphones are without microphones or phone call functions.
5. Why is the Bluetooth connection not stable and/or experiences some interruptions?
1) Try shortening the distance between your headphones and the device. Avoid solid barriers in
between you and the device.
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS.
3) Please make sure the Bluetooth antenna of your device is not blocked.
6. Why can'tt the volume be adjusted by the cellphone buttons when playing soothing sounds in 1MORE
MUSIC APP?
The soothing sounds are stored in the ash of the headphone which can be adjusted only via the APP.
7. The headphones will be disconnected from the cellphone when out of wireless range. They cannot
restore the connection after returning back into the wireless range, how to solve it?
Click the device name in the cellphone pairing list to connect again.
8. I feel uncomfortable when wearing the headphones, how to solve it?
This is mainly because the sizes of ear tips and your canals are not snug, we suggest trying smaller ear
tips.
* For more detailed product FAQs, please visit the product support section under www.1more.com
CE
FCC
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio
equipment type 1MORE ComfoBuds Z of EH601 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.1more.com
RF exposure information: The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction. Radiation Exposure
Statement Power is so low that no RF exposure calculation is needed.
Declaration for EU Compliance
Operation Frequency/Max. EIRP: 2400-2483.5MHz, Max. EIRP is 9.10dBm.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types EH601
(FCC ID: 2ASDIEH601) has also been tested against this SAR limit.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modications or changesto this equipment. Such modications or changes could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching
re, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of ammable liquid or gas; and A battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable liquid or gas.
The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment
(WEEE). This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer
when he buys a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above
113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from
working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones in trafc. Do not use the headphones any time it would be
dangerous to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.
8. If you don't feel comfortable after wearing the headphones, please refer to an aurist for advice
on whether in-ear headphones are suitable for you.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identier:
Trade Name: 1MORE
Model No.: EH601
Responsible Party – U.S. Contact Information
1MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mail: [email protected]
Headphones × 1 set
Charging Case
Type-C Charging Cable × 1 Silicone Ear Tip × 3 sets
(XS/S/M/L)
Product Overview Fit
Replace
Placement Headphones Pairing
Bluetooth Pairing To The Device
Charging
Controls Soothing Sounds
Battery Notication
User Guide × 1
Silicone Ear Tip
Charging Pin
Time Setup
mins
Charging Case
Pairing Button
Charging Case LED Indicator
LED Indicator for
Headphone Status
Headphone
Silicone Ear Tip
XS / S / M / L
Warranty Card × 1
The Left and Right headphones will automatically
pair to each other after the lid is open when they
are in the case (with charge).
Headphones taken out of the case that fail to pair
to each other will enter sleep mode. Put the
headphones back into the charging case (with
charge), and they will pair to each other
automatically.
* Above functions are available for either headphone in individual or Stereo mode.
* Functions of 1MORE MUSIC APP may vary with different cellphones or operating
systems. For more details, please contact our customer service.
To charge the case with Type-C cable.
To charge the headphones with the case.
* Above functions are available for either headphone in individual or Stereo mode.
Put the headphones into the correct slot
until it locks in via magnetic click. LEDs will
indicate headphone status LEDs breathing
in white indicate headphones are charging.
Full charge will take around 85
minutes. Headphone status
LEDs glow in white indicating
charging is complete.
Phone call function is not available on these headphones, and the playback controls must
be implemented on the connected device.
Please download 1MORE MUSIC APP for the sleep playlist.
Switch Listening Modes via APP
Enter the 1MORE ComfoBuds Z home page in 1MORE MUSIC APP after pairing to your
cellphone, then you can switch listening modes between "Music" and "Soothing".
Click the "Soothing Sounds" to enter the playlist.
Click "+" to select the sound to be downloaded to your headphones for listening.
Click the timer icon in the song page to set up the playtime.
* Volume ajustment for the soothing sounds can only be implemented via APP.
The LED light of the charging case
will indicate different battery status:
red light indicates low battery, orange
light indicates medium battery and
green light indicates full battery.
LED indicator for case battery status:
when case battery is too low on charge,
LED indicator will glow solid red for 10
seconds.
When headphones are placed in charging
case and the LED on charging case
ashes 10 times, the case has low battery,
please charge the case rst.
Power On: Take the headphones out of
the charging case (with charge), the
headphones will turn on automatically.
Full charge will take
around 80 minutes.
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Midre
Soothing Sounds
Allow adding 2 tracks
Volcano
Falls
River
Home
1MORE ComfoBuds Z
Battery Battery
Soothing Sounds
Listening Modes
SoothingMusic
Home
1MORE ComfoBuds Z
Battery Battery
Soothing Sounds
Listening Modes
SoothingMusic
Midre River VolcanoFalls
River
Home
1MORE ComfoBuds Z
Battery Battery
Soothing Sounds
Listening Modes
SoothingMusic
  • Page 1 1
  • Page 2 2

1MORE ComfoBuds Z True Wireless In-Ear Headphones ユーザーガイド

ComfoBuds Z True Wireless In-Ear Headphones
1MORE
ブランド
1MORE
モデル
ComfoBuds Z True Wireless In-Ear Headphones
タイプ
ユーザーガイド
PDFをダウンロード
報告

他の言語で

関連論文

その他の書類