Action summary
For further information go to:
help.kokoon.io
Incoming call or in a call
Press for 1 secReject / End call
Single click
Answer call
Using app or media
Single click
Play / Pause
Double click
Skip forward
Double click
Skip backward
Volume down Single click
Press for ~2 sec
On
Press for ~2 sec
O
Press for ~5 sec
On + Pairing
Connected
Single click
Volume up
General
LED single white pulse
3x LED white flashes
LED flashes blue
LED single blue pulse
Important care information
To maintain good sound quality, clean
the acoustic nozzle regularly using an
alcohol-based cleaner on a coon bud.
Clean the silicone sleeves with soapy
water, rinse and dry thoroughly before
re-assembly.
4x LED green flashes
Charging
1x LED green pulse
Fully charged
Charging status
Charging status shows when:
- Connecting or disconnecting the power source.
- buon pressed (whilst power source connected).
1. MyKokoon app
2. Charging
3. Powering on and Pairing*
Connecting for the first time
Connect the headphones to a
power source, using the USB-C
cable.
To turn the headphones on and
enter pairing mode, hold the
buon until the LED flashes blue.
Turn on Bluetooth® on your phone.
Select “Kokoon Nightbuds” in your
Bluetooth® seings.
*Before powering on and pairing, the device must be o.
*Pairing only required for first connection.
Install and open the MyKokoon app.
LED
USB-C
LED
For further information go to:
help.kokoon.io
