英语
Power
In The Box
Placement
Fit
Charging
Bluetooth Pairing
Remote control function
Extra Functions
1MORE (1) Year Limited Warranty
We Appreciate Your Business
Press and hold for 3 seconds
For the first pair, the red and
blue lights will flash alternately,
click the device name to pair.
Skip the paired device and
connect to a new one: press
and hold for 3 seconds when
powered on.
Headphones × 1 Pair Charging Port × 1 Silicone Ear Tip (XS/S/L)
Security Pairing: If the pairing phone has Bluetooth prior to 3.0, please use
the default security code “0000”.
Unpairing: Press and hold Vol+ and Vol- for 5 seconds. The headphones will
switch to automatic discovery mode.
Battery/Volume Display: Currently supports iOS only; may not support other
operating systems.
Multi-Device Connection: When there are two phones connected to the
headphones, only one of the phones will be supported.
If Out of Wireless Connection Range: The headphones will try to reconnect
for 5 minutes. Then they will turn off automatically if not connected to any
device.
The above functions may be vary in different devices.
The LED glows red when charging.
The LED goes off when charging is
complete.
Press once
Press once
Press once
Press and hold
for 2 seconds
Press once
Phone Call
Press once
Press and hold
for 2 seconds
Press and hold
for 2 seconds
Press once
Press once
Playback
SXS M L
on
Press and hold for 5 seconds
OFF
1MORE warrants to the original retail purchaser that this product is to be free
from defective materials and workmanship for a period of one year from the
date of purchase if it is properly used and maintained. If this product proves
defective in either material or workmanship, 1MORE, at its option, will (a)
repair the product with new or refurbished parts, or (b) replace the product
with an equivalent new or refurbished product, at no charge for parts or
labor. If the product model is no longer available and cannot be repaired
effectively or replaced with an identical model, 1MORE at its sole option may
replace the unit with a current model of equal or greater value. In some
cases, modication to the mounting surface may be required where a new
model is substituted. 1MORE assumes no responsibility or liability for such
modication. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE
TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL
DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE
PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE
PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not
limited to a receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original
retail purchaser.
Limitations:
• This limited warranty does not cover the failure of the product resulting from
improper installation, misuse, abuse, accident, neglect, mishandling, or wear
from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint
damage, or consequential damage to other components or premises which
may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance
with 1MORE’s instructions.
• This limited warranty is null and void for products with altered or missing
serial numbers and for products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product
to another party.
Model: EFS3001B
Weight: 18 g
Charging Time: 60 minutes
Talk Time: 8 hours
Playtime: 10 hours*
Impedance: 32 Ω
Wireless Range: 10 m
Input: 5V 1A
Bluetooth: Bluetooth® 5.0
Bluetooth Protocol: HFP/A2DP/AVRCP
Working Temperature: 0 ~ 45
Frequency Band: 2.400 GHz ~ 2.4835 GHz
The specifications are acquired from laboratory tested data.
* The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary
with different device setting, environments, usage and other factors.
Manufacturer: Tiinlab Acoustic Technology Limited
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park,
Taoyuan Str., Nanshan Dist., Shenzhen, P.R. China
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE,
we value your satisfaction. If you would like more details on this product or any
of our other products, please visit us online by scanning the QR code. Go to
www.1more.com and sign up for VIP, and 1MORE will treat you like one.
Tips
1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before rst use.
3. If the headphones have been unused for more than 3 months, we recommend
that you charge them. This will improve battery capacity.
4. Only use charging cables and adapters that are FCC (Federal Communications
Commission) approved.
5. In dry environments, static electricity may numb your ear. This is not related to
the quality of the product.
Safety Information
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol
must not be disposed of with normal household wastage, it must be collected
and disposed of separately to protect the environment.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, re
or the like.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
FAQ
* For more detailed product FAQs, please visit the product support section
under www.1more.com
CE
Warning
FCC
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares
that the radio equipment type 1MORE ColorBuds True Wireless In-Ear
Headphones of EFS3001B is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet
address:www.1more.com
RF exposure information: The device has been evaluated to meet general RF
exposure requirement.
The device can be used in portable exposure condition without restriction.
Radiation Exposure Statement Power is so low that no RF exposure calculation
is needed.
Declaration for EU Compliance
Operation Frequency 2400-2483.5MHz, Max. EIRP is 0.1dBm.
Replacement of a battery with an incorrect type that can defeat a safeguard (such
as catching re, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of
a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that
can result in an explosion or the leakage of ammable liquid or gas; and A battery
subjected to extremely low air pressure that may result in an explosion or the
leakage of ammable liquid or gas.
The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to
European directive 2014/53/EU in order to be recycled or dismantled to minimize
its impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or electronic
equipment.
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modications or changesto this equipment. Such
modications or changes could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.Cet appareil est conforme avec Industrie Canada RSS exemptes de
licence standard(s).
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit
accepter toute interférence, y compris celles pouvant causer un mauvais
fonctionnement de l'appareil.This Class B digital apparatus complies with
Canadian ICES-003.Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
This equipment complies with ISED RF radiation exposure limits set forth for an
uncontrolled environment
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identier:
Trade Name: 1MORE
Model No.: EFS3001B
Responsible Party – U.S. Contact Information
1MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to
temperatures above 113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the
headphones from working properly, and also increase your chance of being
electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones in trafc. Do not use the headphones any time it
would be dangerous to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.
8. If you don't feel comfortable after wearing the headphones, please refer to an
aurist for advice on whether in-ear headphones are suitable for you.
1. The headphones don’t turn on.
Check if your headphones have enough battery life. If not, please charge
them for at least 30 minutes.
2. The headphones and my device do not connect, or take a long time
to connect.
1 Check that your headphones are in the “discoverable” mode (red and
blue lights flash alternately).
2 Make sure that your headphones are not connected to other devices,
and that your device is not connected to other Bluetooth devices.
3 We recommend that you press and hold both the Vol+ and Vol- buttons
simultaneously for 5 seconds. Your headphones’ pairing history will be
cleared and will automatically enter the “discoverable” mode.
If they are still not connecting, restart your device to connect.
3. My Android device successfully connects to the headphones, but the
headphones don't play music.
After pairing successfully, on the Bluetooth menu of your device,
tap the icon on the right of your device name and make sure the “Media
Audio” option is on.
4. My Android device successfully connects to the headphones, but there is
no sound from the headphones while making phone calls.
After pairing successfully, on the Bluetooth menu of your device, tap the
icon on the right of your device name and make sure the “Phone Audio”
option is on.
5. The Bluetooth connection is not stable, causing some interruptions.
1Try shortening the distance between your headphones and device.
2Avoid solid barriers in between. Please keep away from strong
interference sources, such as Wi-Fi and GPRS.
3Please make sure the Bluetooth antenn a of your device is not blocked.
6. While using third party music/video player apps, some in-line remote
control functions do not match those in the manual.
1Y our operating system and the third party music/video player apps may
have different settings for the in-line remote control functions.
2 We recommend that you use the music/video player apps that your
device has originally provided.
7. I adjusted the in-line remote control to the maximum volume, but the
actual volume still sounds low.
In different operating systems, especially some Android systems, the
headphones and your device have separate volume control systems.
Please adjust the volume controls on both the device and the headphones
according to your preference.
1MORE iBFree Lace
on
Connected
Bluetooth
Bluetooth
Settings