SoundPEATS Q35 HD 取扱説明書

タイプ
取扱説明書

このマニュアルも適しています

English ------------------------------------------------------------------------------------------------------ 1 - 8
------------------------------------------------------------------------------------------------------- 9 - 15
--------------------------------------------------------------------------------------------------------- 16 - 21
Contents
声明
从原购买者或授权使用者购买的二手或使用过的产品
因为误操作或不规范使用造成的损害
因化学物质,明火,辐射物质,有毒物质,液体造成的损害
因自然灾害造成的损害
因第三方/人/物或其他造成的损害
我们只对从SoundPEATS或SoundPEATS的授权经销商购买的产品提供销售服务,如果你产
品是从其他卖家购买,请联系该卖家进行退货或换货。
2.保修条例
如果因为产品缺陷而致使产品无法正常使用,请联系经销商来开始退货及保修流程,以下情
况不包含在SoundPEATS保修范围内
1.客服支持
12月的保修期,若需更多帮助请邮件到[email protected],客服会在24小时
内回复您,了解更多的产品信息请访问www.soundpeatsaudio.com
售后
USER MANUAL 说明书
Q35+
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
www.soundpeatsaudio.com
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Made in China
FCC ID 2AFTUQ30
208-170139
Model: Q35+
English
English
English
Getting Started
English
English
Product Diagram
Customer Support
Warranty and Support
Care and Maintenance
Keep the headphones away from heat and humidity.
Do not put the product under direct sunlight or hot areas. High temperatures will
shorten lifespan of the headphones, battery and / or the internal circuit board.
Do not try to take the product apart.
Do not drop or knock your headphones on hard surfaces.
Do not use chemicals or detergents to clean the product.
Do not scrape the surface with sharp objects.
If you need any assistance or support, please email [email protected]
with details.
We will answer your email within 24 hours. We will do our best to provide you with a
viable solution.For more information, please visit www.soundpeatsaudio.com.
Warranty
We warrant this device 12 MONTHS from date of the original purchase for
manufacturer defects.
If the device fails due to a manufacturing defect, please contact seller directly to
initiate return and warranty process.
The following are excluded from SoundPEATS warranty cover:
FCC Statement
Device purchased as second hand, used or from unauthorized seller.
Damage resulted from misuse and abusive action.
Damage resulted from chemical, fire, radioactive substance, poison, liquid.
Damage resulted from natural disaster.
Damage caused to any third party / person / object and beyond.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Statement
We can only provide after sale service for products purchased directly from SoundPEATS or
SoundPEATS authorized distributor. If you have purchased from a different seller, please
contact them for any exchange or request.
Introduction
Package Content
English
English
English
1 x SoundPEATS Q35+ Wireless Headset
2 x Cable Buckles
2 x Cable Clamps
1 x Carrying Case
10 x Interchangeable Ear Tips
6 x Interchangeable Ear Hooks
1 x USB Charging Cable
1 x Hanging Hook
1 x User Manual
Specifications
Technology
Chipset
Audio Codec
Maximum Working Range
Working Time
Charging Time
Power Capacity
Dimension (L * W * H)
Weight
BT5.0, HSP, HFP, A2DP, AVRCP
QCC3024
SBC
33 feet (10m)
Up to 12 hours(Varies by volume level and audio)
About 2 hours
55mAh*2
25 x 0.98 x 1.26 inches / 635 x 25 x 32 mm
0.53 oz / 15.0g
Charging
Pairing
The headphones is partially charged at the factory. Please make sure that you fully
charge it before using it for the first time.
1. Connect the original USB cable with any USB port available, such as a computer or
a laptop.
2. Charging starts automatically with LED indicator turning red.
3. The headphones is fully charged when LED indicator turns blue.
Note:
1.Charge the headphones at least once every 3 months when not using for a long
time.
2.When charging with a USB adapter, the charging current should not be greater
than 1A.
3. The LED indicator will flash red when the battery is low, and you will hear a voice
prompt“battery low”. After that, it will remind you the low battery every 2 minutes
and it will power off automatically after it reminds you 4 times. Please recharge the
headset.
Charging Contactor
Volume+ / Next Track
Multifunctional Button
LED Indicator / Microphone
Volume- / Previous Track
Charging Slot
To pair the headphones with your device, you must first bring it into pairing mode.
1.Please turn off other Bluetooth devices nearby, and make sure the headphones
and your Bluetooth device are close enough (within 3 feet).
2.Press and hold the multifunctional button for approximately 3 seconds until the LED
indicator flashes blue with a voice prompt “pairing” (you will hear the voice prompt
“power on” first, just keep holding the multifunctional button). Now the
headphones is in pairing mode.
3.Activate the Bluetooth function on your device and search for the nearby Bluetooth
connection“Q35+” should be listed in the search result. Select the name to
connect. Once connected, only the blue LED will flash slowly, and you will hear a
voice prompt “connected”.
Note:
1.If you want to pair the headphones with another device, you need to first turn off
your headphones, and then press and hold the multifunctional button for 5
seconds. Then you can pair with your device by following the “Pairing”
instructions.
2.The Q35+ headphones will stay in pairing mode for 3 minutes at most if no pairing
device is found. Afterwards, it will power off automatically.
3.If you want to disconnect the Q35+ headphone with your device, just simply press
and hold the volume+ and volume- buttons simultaneously for 3 seconds. Then it
will disconnect with your device and go into pairing mode.
Trouble Shooting
Q: The headphones is on, but it is not connecting to my device?
A: In order for both devices to connect, you need to bring both devices to pairing
mode. Simply turn on the headphones is not going to make them connect.
Please follow the instruction in the “Pairing” section.
Q: I have established connection with my smart phone, but I am not hearing
any sound?
A: Please make sure that you turn up the volume of both devices. Some smart
phones require you to set up the Bluetooth headphones as an audio output
device before sound is transmitted. Please see the instruction of your smart
phone for details. If you are using a music player or other Bluetooth device,
please make sure it supports A2DP stereo music profile.
Q: The sound is not very clear / the caller cannot hear my voice clearly?
A: Please adjust the volume on your phone and headphones. Make sure there is no
source of interference nearby. Stay close to your smart phone.
Q: Can I use the headphones while it is charging?
A: No, you cannot use the headphones while it is charging.
Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no objects between the headphones and your
Bluetooth device. Please make sure there is no radio or WIFI interference nearby.
Q: What is the range of Wireless headphones?
A: Bluetooth headphones has maximum range of 33 feet (10m). However, the
actual range will depend on usage and environment. Connection is usually
good within 15-25 feet with no major obstacles between devices.
Q: My headphones will not switch on.
A: Please recharge it and make sure it has enough battery power. If it is fully
charged and still nothing happens or if you are not able to charge the unit,
please contact our customer support for warranty cover.
Button Controls and LED Indicator
Power On
Power Off
Play/Pause
Function
Button Controls
Operation
Press and hold the Multifunctional Button for 3 seconds until the
LED indicator ash blue
Press and hold the Multifunctional Button for 3 seconds until the
LED indicator ash red
Press the Multifunctional Button once
Volume +/-
Play Next/Previous
Answer/Hang Up Phone Call
Reject Phone Call
Switch Phone Calls
Activate Siri
Reset
Press the +/- button once
Long press the +/- button for 2 seconds
Press the Multifunctional Button once
Long press the Multifunctional Button for 1.5 seconds
Double press the Multifunctional Button to switch to another
phone call when you are in a call
Double press the Multifunctional Button
Press and hold the Multifunctional Button for 3 seconds when
the headphones is being charged
LED indicator is solid red
LED indicator is solid blue
LED indicator flashes red once every 6 seconds
LED indicator flashes blue twice quickly
LED Indicator
LED Indicator
Status
Charging
Fully charged
Low battery
Reset
1 x
2 x
2 x
1 x
10 x
6 x
1 x
1 x
1 x
Thank you for choosing SoundPEATS Q35+ Wireless Headset. Please read the manual
carefully, and keep it for further reference. If you need any assistance, please contact
our customer support team by emailing [email protected].
感谢您选择SoundPEATS Q35+无线耳机,这份说明书可以更好的帮助您使用您的SoundPEATS
Q35+耳机,请您妥善保存,如需更多的帮助,请联系:[email protected].
充电触点
音量+/下一曲
多功能按钮
LED指示灯/麦克风
音量-/上一曲
充电槽
产品说明
产品说明
产品规格
问题解答
使用说明
1.开始
耳机在出厂前已进行部分充电,所以是可以开机使用的,但在首次使用时请确保手机充满电,
耳机在出厂已进行部分充电,所以是可以开机正常使用的。但在首次使用前,请确保它们已充
满电,充电时,可以连接USB充电适配器的充电端口与任何或计算机USB端口,充满电时,LED
指示灯从红色常亮变为蓝色常亮。
注意:
1.如果需要将Q35+耳机配对一个新的手机,耳机关机模式下,长按多功能键5S,耳机进入配对
模式,接下来按照配对部分的步骤3操作即可。
2.与设备连接成功时,您想解除Q35+耳机与设备的连接,此时只需同时按下音量+, 音量- 按钮
3秒,它就会失去与该设备的连接,且耳机同步进入配对模式。
3.Q35+无线耳机在配对模式下,3分钟时间内未有设备与之连接,耳机自动关机。
注意:
1. 长时间不使用时,每3个月至少充电一次耳机。
2. 充电时电流不超过1A。
3. 当耳机低电量时,耳机会有“ battery low”提示音,此提示音每2分钟提示1次,提示4次后
耳机关机,关机时系统有power off提示音,此时请为耳机充电。
2.配对
3.一般功能
4.指示灯
1).关闭其他蓝牙设备,打开想要与耳机配对的设备,确保耳机和蓝牙设备紧密地连接在一起
(1米以内)。
2).长按耳机多功能键大约3秒直到led指示灯蓝灯闪烁,同时伴随"power on"的提示音,此时
耳机进入了配对模式。
3).激活你想要与耳机配对的设备的蓝牙功能,在可用的设备清单中,找到并选择。
“SoundPEATS Q35 +”,一旦连接成功,LED将会显示蓝色,你会听到一个声音提示
“Your headset is connected”。
问:我的耳机无法打开
答:为确保耳机有足够的电量请在使用前给耳机进行充电,如果耳机无法进行充电或充满后依
旧无法开机,请联系我们的售后客服进行保修
问:耳机电源已经打开,但无法连接到设备?
答:将耳机连接到您的设备时,请检查该设备的蓝牙是否处于开启状态,然后选择蓝牙列表上
的耳机名称来配对,如果耳机仍然无法连接到您的设备,请尝试通过重置部分重置它,或者联
系售后客服咨询
问:我已经将手机和耳机连接,但是我听不到任何声音?
答:请确认你是否将手机和耳机的声音都调高至可听范围,有的手机需要你手动设置耳机为声
音输出设备才可以传输声音,请参考手机的说明书来确认相关细节,如果你使用音乐播放器或
者其他蓝牙设备连接耳机,请确认你的设备是否支持A2DP蓝牙立体声协议
问:声音不太清晰,通话时对方无法听到或无法听清楚我的声音?
答:请调整手机和耳机的音量至合适范围,确保附近没有干扰源靠近你的智能手机
问:为什么连接不稳定,断断续续?
答:请确认耳机和蓝牙设备之间没有阻挡物体且附近没有收音机或WiFi等电磁干扰源
耳机维护和保养
耳机请勿靠近高温和高湿环境
请勿阳光直晒耳机,或使耳机处于高温环境,高温会缩短耳机电池以及内部电路的寿命。
请勿尝试拆开耳机
请勿将耳机跌落或摔砸在硬面
请勿用化学品或洗涤剂来清洁耳机
请勿用尖锐物品刮蹭产品
开机
关机
播放/暂停
音量加/减
下一曲/上一曲
接听/挂断电话
拒绝电话
通话转换
激活Siri
恢复出厂设置
按住多功能按钮3S直到LED灯亮蓝光
按住多功能按钮3S直到LED灯亮红光
单击多功能按钮
单击+/-按钮
长按+/-按钮2秒
单击多功能键
长按多功能键1.5S
在通话中双击多功能按钮可以切换多方通话
双击多功能按钮
充电状态下按多功能按钮3S
红灯常亮
蓝灯常亮
红灯每6S闪烁一次
蓝灯快闪2次
充电中
充满电
低电量
恢复出厂设置
指示灯状态
BT5.0、HSP、HFP、A2DP、AVRCP
QCC3024
SBC
Up to 12 hours(Varies by volume level and audio)
About 2 hours
55mAH*2
10M
635 x 25 x 32 mm
15.0g
技术
芯片
音频编解码器
工作时间
充电时间
电池容量
连接距离
产品尺寸(长*宽*高)
产品重量
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21
1 x Q35+ 无线耳机
2 x 线扣
2 x 线夹
1 x 耳机包
10 x 耳帽
6 x 耳挂
1 x USB数据线
1 x 挂钩
1 x 说明书
功能 操作
  • Page 1 1

SoundPEATS Q35 HD 取扱説明書

タイプ
取扱説明書
このマニュアルも適しています

他の言語で