imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray
™
Disc Player
user manual
BD-H4500
ENGLISH
Safety Information
Warning
•
The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be
blocked or covered.
- Do not place this apparatus in a confined
space, such as a bookcase, or built-
in cabinet, unless proper ventilation is
provided.
- Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
•
Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorized
dealer immediately.
•
This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
•
Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in fire or electric shock.
•
Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
•
To protect this apparatus from a lightning
storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set
due to lightning and power line surges.
•
Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
•
Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
•
To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
•
Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
•
If this apparatus does not operate normally -
in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately and
contact an authorized dealer or service center.
•
Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
•
Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you
are leaving the house for an extended period
of time (especially when children, elderly, or
disabled people will be left alone in the house).
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by
causing the power cord to generate sparks
and heat or the insulation to deteriorate.
•
Contact an authorized service center for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage of
your product.
•
Use only a properly grounded plug and wall
outlet.
- An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
•
To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
•
Do not allow children to hang on the product.
•
Store the accessories (battery, etc.) in a
location safely out of the reach of children.
•
Do not install the product in an unstable
location such as a shaky self, a slanted floor, or
a location exposed to vibration.
•
Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service center.
•
To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals
such as wax, benzene, alcohol, thinners,
insecticide, air fresheners, lubricants, or
detergent. These chemicals can damage the
appearance of the product or erase the printing
on the product.
•
Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
•
Do not dispose of batteries in a fire.
•
Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
•
There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
•
WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage
is present inside. It is dangerous to make
any kind of contact with any internal
part of this product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
2
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure.
CAUTION :
•
THIS PRODUCT USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE
IF DIRECTED. BE SURE TO OPERATE
PRODUCT CORRECTLY AS
INSTRUCTED.
•
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE. DO NOT
OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
This product satisfies CE regulations
when shielded cables and connectors
are used to connect the unit to other
equipment. To prevent electromagnetic
interference with electric appliances, such
as radios and televisions, use shielded
cables and connectors for connections.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
✎
NOTES
`
If the Region number of a Blu-ray Disc/
DVDs does not correspond to the Region
number of this player, the player cannot
play the disc.
IMPORTANT NOTE
The mains lead on this equipment is
supplied with a molded plug incorporating
a fuse. The value of the fuse is indicated
on the pin face of the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover
omitted if the cover is detachable. If a
replacement fuse cover is required, it
must be of the same colour as the pin
face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the
power points in your house or the cable
is not long enough to reach a power
point, you should obtain a suitable safety
approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to
cutting off the plug, remove the fuse and
then safely dispose of the plug. Do not
connect the plug to a mains jack, as there
is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the
mains, the plug must be pulled out from
the mains socket, therefore the mains plug
shall be readily operable.
The product unit accompanying this
user manual is licenced under certain
intellectual property rights of certain third
parties.
Precautions
Important Safety Instructions
Read these operating instructions
carefully before using the unit. Follow all
the safety instructions listed below.
Keep these operating instructions
handy for future reference.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near
water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation
openings. Install in accordance with
the manufacturer's instructions.
8.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
AV receivers) that produce heat.
9.
Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where it exits the
apparatus.
11.
Only use attachments/accessories
specified by the manufacturer.
12.
Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer,
or sold with
the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
13.
Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as when the power-supply cord or
plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
3
Contents Getting Started
Before using the User Manual
Disc Types and Contents your player can play
Media Disc Type Details
VIDEO
Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-
R/+R that have been recorded and finalized, or a USB
storage media containing DivX, MKV or MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R
or a USB storage media containing MP3 or WMA
contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-
RE/-R or a USB storage media containing JPEG
contents.
✎
NOTES
`
The player may not play certain CD-RW/-R and DVD-R because of the disc type or
recording conditions.
`
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
`
Your player will not play content that has been recorded on a DVD-R at a bit-rate
that exceeds 10 Mbps.
`
Your player will not play content that has been recorded on a BD-R or USB device
at a bit rate that exceeds 25 Mbps.
`
Playback may not work for some types of discs, or when you use specific
functions, such as angle change and aspect ratio adjustment. Information about
the discs is written in detail on the disc box. Please refer to this if necessary.
`
When you play a BD-J title, loading may take longer than a normal title or some
functions may perform slowly.
SAFETY INFORMATION
Warning ....................................... 2
Precautions ................................. 3
GETTING STARTED
Before using the User Manual ...... 4
Logos of Discs the
player can play ............................ 5
Accessories ................................. 7
Front Panel .................................. 7
Rear Panel ................................... 7
Remote Control ........................... 8
CONNECTIONS
Connecting to a TV ...................... 8
Connecting to an Audio System .. 9
SETTINGS
The Initial Settings Procedure ...... 9
Menu Navigation .......................... 9
Accessing the Settings Menu .... 10
Display Settings ......................... 10
Audio Settings ........................... 11
System Settings ........................ 12
Language Settings ..................... 12
Security Settings ....................... 12
Support Settings ....................... 13
MEDIA PLAY
Playing a Commercially
Recorded Disc ........................... 13
Playing Files on a USB Device ... 13
Playing a Disc with User
Recorded Content ..................... 14
Controlling Video Playback ........ 14
Controlling Music Playback ........ 15
Playing Photo Contents ............. 16
APPENDIX
Troubleshooting ......................... 17
Specifications ............................ 18
4
Disc types your player cannot play
•
HD DVD
•
DVD-ROM/PD/
MV, etc
•
DVD-RAM
•
Super Audio CD
(except CD layer)
•
DVD-RW (VR
mode)
•
CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
•
3.9 GB DVD-R for
Authoring.
Region Code
Both players and discs are coded by region.
These regional codes must match for a disc to play. If the codes do not match, the
disc will not play.
The Region Number for this player is displayed on the rear panel of the player.
Disc Type
Region
Code
Area
Blu-ray
Disc
A
North America, Central America, South America, Korea, Japan,
Taiwan, Hong Kong and South East Asia.
B
Europe, Greenland, French territories, Middle East, Africa,
Australia and New Zealand.
C
India, China, Russia, Central and South Asia.
DVD-
VIDEO
1
The U.S., U.S. territories and Canada
2
Europe, Japan, the Middle East, Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines, Indonesia, Hong Kong
4
Mexico, South America, Central America, Australia, New
Zealand, Pacific Islands, Caribbean
Disc Type
Region
Code
Area
DVD-
VIDEO
5
Russia, Eastern Europe, India, North Korea, Mongolia
6
China
Logos of Discs the player can play
Blu-ray Disc DivX
PAL broadcast System in U.K., France,
Germany, etc.
Supported File Formats
Notes on the USB connection
•
Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.
•
The player does not support folder or file names longer than 128 characters.
•
Some USB/External HDD/digital camera devices may not be compatible with the player.
•
Your player supports the FAT16, FAT32, and NTFS file systems.
•
Connect USB devices directly to the player’s USB port. Connecting through a USB
cable may cause compatibility problems.
•
Inserting more than one memory device into a multi-card reader may cause the
reader to operate improperly.
•
The player does not support the PTP protocol.
•
Do not disconnect a USB device during a "loading" process.
•
The bigger the image resolution, the longer the image takes to display.
•
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded
from commercial sites.
•
Your player only supports video with a frame rate under 30fps (frames per second).
•
Your player only supports USB Mass Storage Class (MSC) devices such as thumb
drives and USB HDD. (HUB is not supported.)
5
•
Certain USB HDD Devices, multi-card readers and thumb drives may not be
compatible with this player.
•
If some USB devices require excessive power, they may be limited by the circuit safety device.
•
If playback from a USB HDD is unstable, provide additional power by plugging the
HDD into a wall socket.
If the problem continues, contact the USB HDD manufacturer.
•SAMSUNG is not responsible for any data file damage or data loss.
•
Your player does not support NTFS compressed files, sparse files, or encrypted files.
•
You can repair or format a USB device on your Desktop PC. (MS-Windows OS only).
Video File Support
File
Extension
Container Video Codec
Audio
Codec
Resolution
*.avi
AVI
DivX 3.11/4/5/6
MP3
Dolby Digital
DTS
WMA
PCM
1920x1080
MP4v3
H.264 BP/MP/HP
1920x1080
*.mkv
MKV
VC-1 AP MP3
Dolby Digital
DTS
1920x1080
H.264 BP/MP/HP
1920x1080
*.wmv
WMV (wmv9)
VC-1 AP
WMA
1920x1080
VC-1 SM
1920x1080
*.mp4
MP4
MP4 (mp4v)
AAC
1920x1080
H.264 BP/MP/HP
1920x1080
*.mpg
*.mpeg
PS
MPEG1
MP1, 2
Dolby Digital
DTS
1920x1080
MPEG2
1920x1080
H.264 BP/MP/HP
1920x1080
*.rmvb
RMVB
RV8/9/10
(RV30/40)
RealAudio 6
1920x1080
• Limitations
- Even when a file is encoded by a supported codec listed above, the file might not
be played if its content has a problem.
- Normal playback is not guaranteed if the file’s container information is wrong or the
file itself is corrupted.
- Files having a higher Bit rate/frame rate than standard may stutter during sound/
video playback.
- The Seek (skip) function is not available if the file’s index table is damaged.
- Depending on your country, RMVB format may not be supported.
• Video decoder
- Supports up to H.264 Level 4.1 and AVCHD
- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
• Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA sampling rate of 22050Hz mono.
- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bit rate: 320kbps
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
✎
NOTES
`
Playback of some DivX, MKV or MP4 file may not be supported depending on their
video resolution and frame rate.
Music File Support
File
Extension
Container
Audio
Codec
Support Range
*.mp3
MP3 MP3
-
*.wma
WMA WMA
* Sampling rates (in kHz) - 8, 11, 16, 22,
32, 44.1, 48
*
Bit rates - All bit-rates from 5kbps to 355kbps
6
Picture File Support
File Extension Type Resolution
*.jpg
*.jpeg
*.jpe
JPEG
15360x8640
*.png
PNG
15360x8640
AVCHD (Advanced Video Codec High Definition)
•This player can play back AVCHD format discs. These discs are
normally recorded and used in camcorders.
•The AVCHD format is a high definition digital video camera format.
•The MPEG-4 AVC/H.264 format compresses images with greater
efficiency than the conventional image compressing format.
•Some AVCHD discs use the "x.v.Color" format. This player can play
back AVCHD discs that use "x.v.Color" format.
•"x.v.Color" is a trademark of Sony Corporation.
•"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic
Industrial Co., Ltd. and Sony Corporation.
✎
NOTES
`
Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
`
"x.v.Color" offers a wider colour range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories shown below.
HDMI Cable
Batteries for Remote
Control (AAA Size)
User Manual Remote Control
Front Panel
USB HOST
REMOTE CONTROL SENSOR
DISC TRAY
PLAY/PAUSE BUTTON
OPEN/CLOSE BUTTON
POWER BUTTON
✎
NOTES
`
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play
button on the player or the remote. To play the movie, you must select Play Movie or Start in the
disc menu, and then press the
v
button.
`
You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
Rear Panel
HDMI OUT
7
Remote Control
Tour of the Remote Control
Turn the player on and off.
Allows you to repeat A-B disc.
(This function might be not available or work
not correctly, depends on type of disc or
recording conditions).
Press numeric buttons to operate options.
Press to open and close the disc tray.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to stop a disc.
Press to use bonusview function.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Use to select menu items and change menu
values.
Press to use Tools menu.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
Press to play a disc.
Press to pause a disc.
Turn the TV on and off.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Use to enter the popup menu/title menu.
Press to search a disc backwards or
forwards.
Press to move to the home menu.
Press to see the full screen on a TV.
During the bluray disc/DVDs playback, this
button does not operate.
Press to exit the menu.
Use to display the playback information.
Allows you to repeat a title, chapter, track or
disc. (This function might be not available or
work not correctly, depends on type of disc
or recording conditions).
TV volume adjustment.
After setup, allows you to set the input
source on your TV.
Installing batteries
✎
NOTES
`
If the remote does not operate properly:
•
Check the polarity (+/–) of the batteries.
•
Check if the batteries are drained.
•
Check if the remote sensor is blocked by obstacles.
•
Check if there is any fluorescent lighting nearby.
!
CAUTION
`
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash
`
Do not dispose of batteries in a fire.
`
Do not short circuit, disassemble or overheat the batteries.
`
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Connections
Connecting to a TV
Connect an HDMI cable from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made
all the other connections.
- When you change the connections, turn off all devices before you start.
Audio
Video
✎
NOTES
`
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital
Audio Out on the player to an audio system to hear audio.
`
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
`
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
`
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
`
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI
cable.
`
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
8
Connecting to an Audio System
You can connect the Blu-ray player to an audio system using one of the
methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made
all the other connections.
- When you change the connections, turn off all devices before you start.
Connecting to an HDMI supported AV receiver
•Connect an HDMI cable from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your receiver.
•Best quality (Recommended)
Audio
Settings
The Initial Settings Procedure
•
The Home screen will not appear if you do not
configure the initial settings.
•
The OSD (On Screen Display) may change in this
player after you upgrade the software version.
•
The access steps may differ depending on the
menu you selected.
•
After the initial settings process is complete, the
panel buttons and remote control can be operated.
After you have connected the player to
your TV, turn on the TV and player. When
you turn on the player the first time, the
player's Initial Settings screen appears on
the TV. The Initial Setting procedure lets
you set the On Screen menu languages,
the aspect ratio (screen size).
✎
NOTES
`
If you want to display the Initial Setting screen
again to make changes, press the
p
button on
the top panel of the player for more than 5 seconds
with no disc inserted. This resets the player to its
default settings.
`
After the initial settings process is complete. you
can operate the HDMI-CEC function.
`
If you want to use the Anynet+(HDMI-CEC) function
to aid in the initial set up process, please follow the
instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Initial Settings Procedure.
`
If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your TV. If the player is left in the screen
saver mode for more than 25 minutes, the power
will automatically turn off.
Menu Navigation
1
2
4
3
1
HOME Button : Press to move to the
Home menu.
2
返回
Button : Return to the previous menu.
3
v
(Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
4
退出
Button : Press to exit the current menu.
9
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest inter-
connectivity feature.
When you connect a Samsung player
and a Samsung TV with BD Wise to each
other via HDMI, and BD Wise is on in both
the player and TV, the player outputs video
at the video resolution and frame rate of
the Blu-ray Disc/DVDs.
✎
NOTES
`
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
`
If the player is connected to a device that does
not support BD Wise, you cannot use the BD
Wise function.
`
For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of
the HDMI video signal to Auto, 1080p,
1080i, 720p or 576p/480p. The number
indicates the number of lines of video per
frame. The i and p indicate interlaced and
progressive scan, respectively. The more
lines, the higher the quality.
Resolution according to the
output mode
•Blu-ray Disc/E-contents/Digital
Contents playback
Output
Setup
HDMI / connected
HDMI Mode
Blu-ray
Disc
E-contents/
Digital
contents
BD Wise
Resolution of
Blu-ray Disc
1080p
Auto
Max. Resolution
of TV input
Max. Resolution of
TV input
1080p@60F
(Movie Frame : Off)
1080p@60F 1080p@60F
Movie Frame :
Auto (24 fps)
1080p@24F 1080p@24F
1080i 1080i 1080i
720p 720p 720p
576p/480p 576p/480p 576p/480p
•DVD playback
Output
Setup
HDMI / connected
HDMI Mode
BD Wise 576i/480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
576p/480p 576p/480p
•Home Menu
Change Device
Settings
Play disc Photos Videos Music
No disc
2
5
6
4
1
3
1
Selects Videos.
2
Selects Music.
3
Selects Settings.
4
Selects Change Device.
5
Selects Play disc.
6
Selects Photos.
✎
NOTES
`
The Videos, Photos, and Music options
require that you have an appropriate disc
inserted into the player or a USB flash
device attached to the player.
Accessing the Settings Menu
To access the Settings menu and
sub-menus, follow these steps:
1.
Press the POWER button.
The Home Menu appears.
2.
Press the
▲▼
◄► buttons to
select Settings, and then press
the
v
button.
3.
Press the ▲▼ buttons to select
the desired submenu, and then
press the
v
button.
4.
Press the ▲▼ buttons to select
the desired item, and then press
the
v
button.
5.
Press the
退出
button to exit the
menu.
✎
NOTES
`
The access steps may differ depending
on the menu you selected. The OSD (On
Screen Display) may change in this player
after you upgrade the software version.
Display Settings
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
TV Aspect Ratio
Depending on the type of television you have,
you may want to adjust the screen size setting.
✎
NOTES
`
Depending on the disc type, some aspect
ratios may not be available.
`
If you select an aspect ratio and option
which is different than the aspect ratio of
your TV screen, the picture might appear to
be distorted.
10
✎
NOTES
`
If the TV you connected to the player does
not support Movie Frame or the resolution
you selected, the message "If no pictures
are shown after selecting ‘Yes’, please wait
for 15 seconds to return to the previous
resolution. Do you want to change the
resolution?" appears. If you select Yes, the
TV’s screen will go blank for 15 seconds,
and then the resolution will revert to the
previous resolution automatically.
`
If the screen stays blank after you have
changed the resolution, remove all discs, and
then press and hold the
p
button on the
top of the player for more than 5 seconds. All
settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display
Setup that your TV will support.
`
When the factory default settings are
restored, all stored user BD data is deleted.
`
The Blu-ray Disc must have the 24 frame
feature for the player to use the Movie
Frame (24 fps) mode.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature
to Auto allows you to adjust the player’s
HDMI output to 24 frames per second
for improved picture quality.
You can enjoy the Movie Frame (24 fps)
feature only on a TV supporting this
frame rate. You can select Movie Frame
only when the player is in the HDMI
1080p output resolution modes.
HDMI Colour Format
Lets you set the colour space format for
HDMI output to match the capabilities of
the connected device (TV, monitor, etc).
HDMI Deep Colour
Lets you output video from the HDMI
OUT jack with Deep Colour. Deep
Colour provides more accurate colour
reproduction with greater colour depth.
Progressive Mode
Lets you improve picture quality
when viewing DVDs.
Audio Settings
Digital Output
Lets you select the digital audio output
format that is suitable for your TV or AV
Receiver. For more details, please refer
to the Digital Output Selection table.
Digital Output Selection
Setup PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded Dolby
D)
Connection HDMI Receiver HDMI Receiver HDMI Receiver
HDMI supported AV
receiver
Audio
Stream on
Blu-ray
Disc
PCM Up to 7.1ch PCM Re-encoded DTS
Re-encoded Dolby
Digital *
Dolby Digital PCM 2ch Dolby Digital Re-encoded DTS
Re-encoded Dolby
Digital *
Dolby Digital
Plus
PCM 2ch Dolby Digital Plus Re-encoded DTS
Re-encoded Dolby
Digital *
Dolby TrueHD PCM 2ch Dolby TrueHD Re-encoded DTS
Re-encoded Dolby
Digital *
DTS PCM 2ch DTS Re-encoded DTS
Re-encoded Dolby
Digital *
DTS-HD High
Resolution
Audio
PCM 2ch
DTS-HD High
Resolution Audio
Re-encoded DTS
Re-encoded Dolby
Digital *
DTS-HD
Master Audio
PCM 2ch
DTS-HD Master
Audio
Re-encoded DTS
Re-encoded Dolby
Digital *
Audio
Stream on
DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital PCM 2ch Dolby Digital Dolby Digital Dolby Digital
DTS PCM 2ch DTS DTS DTS
Definition
for Blu-ray
Disc
Any
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects.
Outputs only main
feature audio stream
so that your AV
receiver can decode
the audio bitstream.
You will not hear
BONUSVIEW audio
and Navigation
Sound Effects.
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
bitstream
Decodes main feature
audio and BONUSVIEW
audio stream together
into PCM audio and add
Navigation Sound Effects,
then re-encodes the PCM
audio into Dolby Digital
bitstream
* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or
actor’s commentary.
- Navigation Sound Effects : When you choose a menu navigation selection, a
Navigation Sound Effect may sound. Navigation Sound Effects are different on each
Blu-ray Disc.
11
✎
NOTES
`
Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
`
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
`
Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
`
Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
`
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
`
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Re-
encoded or Unprocessed) in the setup menu.
`
If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio.
Dynamic Range Control
Lets you apply dynamic range control
to Dolby Digital, Dolby Digital Plus, and
Dolby True HD audio.
•
A
uto : Automatically controls the dynamic
range of Dolby TrueHD audio, based on
information in the Dolby TrueHD soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
•
Off : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
•
On : Turns dynamic range control on for all
three Dolby formats. Quieter sounds are
made louder and the volume of loud sounds
is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your
stereo system. You can choose to have
the player downmix to normal stereo or to
surround compatible stereo.
System Settings
Initial Settings
By using the Initial Settings function,
you can set the language, etc.
For more information about the
Initial Settings function, refer to the
Initial Settings section of this user
manual (See page 9).
Quick Start
You can turn on the power quickly
by decreasing the boot time.
✎
NOTES
`
If this function is set to On, Standby
power consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player
to an Anynet+ Samsung TV with an HDMI
cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY (
) button on the TV’s remote control.
For more information, please see the TV user
manual.
✎
NOTES
`
This function is not available if the HDMI cable
does not support CEC.
`
If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
`
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
`
After the product was turned off,
disconnecting and connecting the power cable
turns it on automatically. At the moment, it
automatically turns off in about 15 seconds
for re-establishing Anynet+ connection.
`
For some TV products, if connected to this
product with Anynet+ function, turning the TV on
may display a warning popup message saying no
connection was found. Still, Anynet+ connection
is properly established and available to use.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray
disc that supports and stored on a flash
drive.
You can check the device’s information
including the storage size, delete the BD
data, or change the Flash memory device.
✎
NOTES
`
In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
`
Your player supports the FAT16, FAT32, and NTFS
file systems. We recommend you use USB devices
that support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.
`
The Resume Play function may not work after you
format the storage device.
`
The total memory available to BD Data Management
may differ, depending on the conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Language Settings
You can select the language you
prefer for the On-Screen menu,
disc menu, audio, and subtitles.
✎
NOTES
`
The selected language will only
appear if it is supported on the disc.
Security Settings
The default security PIN is 0000. Enter the
default PIN to access the security function
if you haven't created your own PIN. After
you have accessed the security function
for the first time, change the PIN using the
Change PIN function.
BD Parental Rating
Prevents playback of Blu-ray Discs with specific
age ratings unless the 4 digit PIN is entered.
DVD Parental Rating
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
Select the rating level you want to set. For
example, if you select Level 6, discs rated above
6 - Level 7 and 8 - will not play.
A larger number indicates more mature content.
12
Change PIN
Change the 4-digit password used
to access security functions.
If you forget your password
1.
Remove any discs.
2.
Press and hold the
p
button on the
top panel for 5 seconds or more.
All settings will revert to the factory
settings.
✎
NOTES
`
When the factory default settings are restored,
all the user stored BD data will be deleted.
Support Settings
Software Upgrade
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By USB
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com/
bluraysupport.
2.
Download the latest USB software
upgrade zip archive to your computer.
3.
Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4.
Copy the RUF file to a USB flash drive.
5.
Make sure there is no disc in the
player, and then insert the USB flash
drive into the USB port of the player.
6.
In the player’s menu, go to Settings >
Support > Software Upgrade.
7.
Select By USB.
✎
NOTES
`
No disc should be in the product
when you upgrade the software
using the USB Host jack.
`
When the software upgrade is done,
check the software details in the
software Upgrade menu.
`
Do not turn off the player during the
software upgrade. It may cause the
player to malfunction.
`
Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
Contact Samsung
Provides contact information for
assistance with your player.
Reset
Returns all settings to their factory
defaults except for the network settings.
Media Play
Playing a Commercially
Recorded Disc
1.
Press the
8
button to open the
disc tray.
2.
Place a disc gently into the disc tray
with the disc's label facing up.
3.
Press the
8
button to close
the disc tray. Playback starts
automatically.
Playing Files on a USB Device
There are two methods you can use to
play or view multimedia files located on
a USB device through your player.
Method 1
1.
Turn the player on.
2.
Connect the USB device to the
USB port on the front panel
of the player. The New Device
Connected pop-up appears.
Change Device
Settings
Play disc Photos Videos Music
No disc
New device connected.
Photos
Videos
Music
123
>
Move
"
Enter
'
Return
✎
NOTES
`
If the pop-up does not appear, go to
Method 2.
3.
Use the ▲▼ buttons to select Photos,
Videos or Music, and then press the
v
button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
✎
NOTES
`
Even though the player will display folders
for all content types, it will only display files
of the Content Type you selected in Step
3. For example, if you selected music, you
will only be able to see music files. You can
change this selection by returning to the
Photos, Videos & Music screen and going
to Step 3 in Method 2 below.
4.
If necessary, use the ▲▼◄►
buttons to select a folder, and
then press the
v
button.
5.
Select a file to view or play, and
then press the
v
button.
6.
Press the
返回
button to exit
a folder or the
退出
button to
return to the Home screen.
7.
Go to pages 14~16 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
Method 2
1.
Turn the player on.
2.
Connect the USB device to the USB
port on the front panel of the player.
Select Change Device and then
press the ▲▼ button to select USB.
Press the
v
button.
13
Change Device
Settings
Play disc Photos Videos Music
No disc
Change Device
No Disc
123
Close
3.
Use the ▲▼◄► buttons to select
Photos, Videos or Music on the
Home screen, and then press the
v
button. The Photos, Videos & Music
screen appears listing the content of
the device. Depending on how the
contents is arranged, you will see
either folders, individual files, or both.
✎
NOTES
`
Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Photos,
Videos & Music screen and repeating Step 3.
4.
If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the
v
button.
5.
Use the ▲▼◄► buttons to select
a file to view or play, and then
press the
v
button.
6.
Press the
返回
button to exit a
folder or the
退出
button to return
to Home screen.
7.
Go to pages 14~16 for
instructions that explain how to
control playback of videos, music,
and pictures on a USB device.
✎
NOTES
`
If you insert a disc when playing
a USB device, the device mode
changes to "Disc" automatically.
Playing a Disc with User
Recorded Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1.
Place a user recorded disc into the
disc tray with the disc’s label facing
up, and then close the tray.
2.
Use the ◄► buttons to select the
type of content you want to view or
play - Videos, Photos, or Music -
and then press the
v
button.
✎
NOTES
`
Even though the player will display
folders for all content types, it will only
display files of the Content Type you
selected in Step 2. For example, if you
selected music, you will only be able
to see music files. You can change
this selection by returning to the Home
screen and repeating Step 2.
3.
A screen appears listing the contents
of the disc. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
4.
If necessary, use the ▲▼◄►buttons
to select a folder, and then press the
v
button.
5.
Use the ◄►▲▼ buttons to select a
file to view or play, and then press the
v
button.
6.
Press the
返回
button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the
退出
button to return directly
to the Home Screen.
7.
Go to pages 14~16 for instructions
that explain how to control playback of
videos, music, and pictures on a disc.
Controlling Video Playback
You can control the playback of video
content located on a Blu-ray disc, DVD,
CD, USB device. Depending on the
media, some of the functions described
in this manual may not be available.
During Blu-ray or DVD disc playback,
the Full screen button does not operate.
Buttons on the Remote Control
used for Video Playback
1
2
Playback related buttons
The player does not play sound in
Search, Slow or Step mode.
•To return to normal speed
playback, press the
6
button.
6
button
Starts playback.
5
button
Stops playback.
7
button
Pauses playback.
Fast Motion
Play
During playback, press the
3
or
4
button.
Each time you press the
3
or
4
button, the playback
speed will change.
Slow Motion
Play
In pause mode, press the
4
button.
Each time you press the
4
button, the playback
speed will change.
Step Motion
Play
In pause mode, press the
7
button.
Each time you press the
7
button, a new frame appears.
Skip Motion
Play
During playback, press the
1
or
2
button.
Each time you press the
1
or
2
button, the disc moves to the
previous or next chapter or file.
Using the disc menu, title menu,
popup menu, and title list
碟片菜单
button
During playback, press
this button to start the
disc menu function.
标题菜单
button
During playback, press
this button to start the title
menu function.
弹出菜单
button
During playback, press
this button to start the
popup menu function.
14
Playlist
1.
To move to the Music List, press
the
5
or
返回
button.
The Music List screen appears.
1/2 Page
Music
TRACK 001
TRACK 001
02:38
TRACK 003
02:38
TRACK 005
02:38
TRACK 007
02:38
TRACK 009
02:38
TRACK 004
02:38
TRACK 002
02:38
TRACK 006
02:38
TRACK 008
02:38
TRACK 010
02:38
c
Select Tools
( )
Jump to Page
'
Return
CD a Change Device
2.
Press the ▲▼◄► buttons to move to a
desired track, and then press the YELLOW
(C) button. A check appears on the track.
Repeat this procedure to select
additional tracks.
3.
To remove a track from the list, move
to the track, and then press the
YELLOW (C) button again.
The check on the track is cancelled.
4.
When done, press the
v
button.
The tracks you selected are displayed
on the right side of the screen. The
player plays the first track.
5.
To change the play list, press the
@
button or
返回
button to return to the
Music List. Repeat Steps 2, 3, and 4.
6.
To cancel the play list and return to the Home
screen, press the
返回
or
退出
button.
✎
NOTES
`
You can create a playlist with up to
99 tracks on Audio CDs (CD-DA).
`
If you remove all the tracks from
a play list and then press the
v
button, the player lists and plays all
the tracks on the disc.
Ripping
Lets you copy audio files contents
from data Disc to USB/HDD device.
1.
Open the disc tray. Place the audio
(CDDA) disc on the tray, and close the
tray. Insert a USB device into the USB
jack on the front of the product.
2.
In Stop mode, press the ▲▼◄►
buttons to move to a desired track,
and then press the YELLOW (C)
button. A check appears on the track.
Repeat this procedure to select
additional tracks.
3.
To remove a track from the list, move
to the track, and then press the
YELLOW (C) button again.
The check on the track is cancelled.
4.
When done, press the
工具
button
and then select the Rip using the
▲▼ buttons. and then press the
v
button. The Rip pop-up appears.
5.
Use the ▲▼ buttons to select the
device to store the ripped files, and
then press the
v
button.
✎
NOTES
`
Do not disconnect the device while
ripping is in progress.
6.
If you want to cancel ripping, press
the
v
button and then select Yes.
Select No to continue ripping.
7.
When ripping is complete, the
"Ripping completed." message
appears. Press the
v
button to go
back to the Playback screen.
✎
NOTES
`
This function may not be supported by some discs.
Controlling Music Playback
You can control the playback of music
located on a Blu-ray disc, DVD, CD,
USB device.
Buttons on the Remote Control
used for Music Playback
1
4
6
3
2
5
1
NUMBER buttons (Audio CD (CD-DA)
only) : During Playlist playback, press the
desired track number.
The selected track is played.
2
Skip : During playback, press the
1
or
2
button to move to the previous or
next file of the playlist.
3
5
button : Stops a track.
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the
3
or
4
button.
Each time you press the
3
or
4
button, the playback speed will change.
5
Pause : Pauses a track.
6
6
button : Plays the currently selected track.
Repeat an Audio CD (CD-DA)/MP3
1.
During Playlist playback, press
the
工具
button.
"
Pause c Select Tools
'
Return
+
00:08 / 05:57
1/6
TRACK 001
05:57
TRACK 002
04:27
TRACK 003
04:07
TRACK 004
03:41
TRACK 005
03:17
TRACK 006
03:35
Playlist
TRACK 001
CD
Tools
Repeat Mode ? Off \
Rip
>
Move
<
Adjust
'
Return
2.
Press the ◄► buttons to select
Track, All, Shuffle, or Off.
3.
Press the
v
button.
Off
Songs are played in
the order in which they
were recorded.
( ) Track
The current song is
repeated.
( ) All All songs are repeated.
( ) Shuffle
Shuffle plays songs in
random order.
15
Playing Photo Contents
You can control the playback of photo
content located on a Blu-ray disc, DVD,
CD, USB device.
Using the Tools Menu
During playback, press the
工具
button.
Start Slide
Show/ Stop
Slide Show
Select to start or stop the
slide show.
Slide Show
Speed
Select to set a slide show's
speed.
Background
Music
Select to listen to music while
viewing a slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4
times)
Rotate
Select to rotate the picture.
(This will rotate the picture
either clockwise or counter
clockwise.)
Information
Shows the picture
information.
✎
NOTES
`
Depending on the disc or storage
device, the Tools menu may differ.
`
To enable the background music
function, the photo file must be
in the same storage media as the
music file.
However, the sound quality can be
affected by the bit rate of the MP3
file, the size of the photo, and the
encoding method.
`
You can't enlarge the subtitle and
PG graphic in the full screen mode.
`
On the Ripping screen, you can also
choose Select All and Deselect All.
-
Use Select All to select all tracks. This
cancels your individual track selections.
-
Use Deselect All to deselect all
selected tracks at once.
Disc Copy to USB
Lets you copy video/photo/music contents
from data Disc to USB/HDD device.
1.
Open the disc tray. Place the data disc on
the tray, and close the tray. Insert a USB
device into the USB jack on the front of the
product. The new device pop-up appears.
2.
Press the ▲ button, and then press the
◄► buttons to select Blu-ray, DVD or CD.
3.
Use the ▲▼ buttons to select Photos, Videos
or Music, and then press the
v
button. The
Photos, Videos & Music screen appears listing
the content of the device. Depending on how
the contents is arranged, you will see either
folders, individual files, or both.
✎
NOTES
`
Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Photos,
Videos & Music screen and repeating Step 3.
4.
With the Playback screen displayed,
use the ▲▼◄► buttons to select the
Videos, Photos, or Music, and then
press the YELLOW (C) button. A check
appears to the left of the desired item.
5.
Repeat Step 4 to select and check
additional desired item.
6.
To remove the desired item from the list,
press the YELLOW (C) button again.
The check on the desired item is removed.
7.
When done, press the
工具
button and
then select the Copy to USB using the
▲▼ buttons. and then press the
v
button. The Copy to USB pop-up appears.
8.
Use the ▲▼ buttons to select the
device to store the copied files, and
then press the
v
button.
✎
NOTES
`
Do not disconnect the device while
copying is in progress.
9.
If you want to cancel copying, press
the
v
button and then select Yes.
Select No to continue copying.
10.
When copying is complete, the
"Copying completed." message
appears. Press the
v
button to
go back to the Playback screen.
✎
NOTES
`
This function may not be supported by
some discs.
`
On the Copying screen, you can also
choose Select All and Deselect All.
-
Use Select All to select all item. This
cancels your individual item selections.
-
Use Deselect All to deselect all
selected item at once.
16
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be
performed with the
remote control.
•
Check the batteries in the remote control. They may need replacing.
•
Operate the remote control at a distance of no more than 6.1m from
the player.
•
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to reset
it. Reinstall batteries and try to operate the remote control again.
Disc does not play. •
Ensure that the disc is installed with the label side facing up.
•
Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.
•Ensure that the disc has disc menus.
The prohibition
message appears on
the screen.
•
This message appears when an invalid button is pressed.
•
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
•
You’ve requested a title or chapter number or search time that is out of range.
Play mode differs
from the Setup Menu
selection.
•Some of the functions selected in the Setup Menu may
not work properly if the disc is not encoded with the
corresponding function.
The screen ratio
cannot be changed.
•The Screen Ratio is fixed on your Blu-ray Disc/DVD.
•This is not a problem with the player.
No audio. •Make sure you have selected the correct Digital Output in
the Audio Options Menu.
The screen is blank. •
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
•
Press the
p
button (on top panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
•
When the factory default settings are restored, all stored user BD data
is deleted.
PROBLEM SOLUTION
Forgot password •Press the
p
button (on top panel) for more than 5 seconds
with no disc inside. All settings including the password will
revert to the factory settings.
Don’t use this unless absolutely necessary.
•When the factory default settings are restored, all stored
user BD data is deleted.
The picture is noisy or
distorted
•Make sure that the disc is not dirty or scratched.
•Clean the disc.
No HDMI output. •
Check the connection between the TV and the HDMI jack of the player.
•
Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI
input resolutions.
Abnormal HDMI output
screen.
•
If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
•Go to the contents and find the section of the user manual
that contains the explanations regarding the current
problem, and follow the procedure once again.
•If the problem still cannot be solved, please contact your
nearest Samsung authorised service centre.
✎
NOTES
`
When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your player, an administration fee may be
charged if either:
1.
An engineer is called out to your home at your request and there is no
defect in the product.
2.
You bring the unit to a repair centre and there is no defect in the
product.
We will provide you with the amount of the administration fee before we
make a home visit or begin any work on your player.
We recommend you read this manually thoroughly, search for a solution
on line at www.samsung.com, or contact Samsung Customer Care
before seeking to repair your player.
17
Compliance and Compatibility Notice
NOT ALL discs are compatible
•
Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
•
Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
•
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-
RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may
not respond to all operating commands or operate all features of every disc. These and
other disc compatibility and player operation issues with new and existing format discs are
possible because:
- Blu-ray is a new and evolving format and this player may not operate all features of Blu-
ray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
- not all new and existing disc format versions are supported by this player;
- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
- some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
- some discs may not be played depending on their physical state or recording conditions;
- problems and errors can occur during the creation of Blu-ray Disc or DVD software and/
or the manufacture of discs;
- this player operates differently than a standard DVD player or other AV equipment; and/or
- for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care centre.
•
If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
•
For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
Specifications
General
Weight 1.1 Kg
Dimensions 300 (W) X 208 (D) X 42 (H) mm
Operating Temperature
Range
+5°C to +35°C
Operating Humidity Range 10 % to 75 %
USB
Type A USB 2.0
DC output
5V 0.5A Max.
HDMI
Video 1080p, 1080i, 720p, 576p/480p
Audio PCM, Bitstream
- Design and specifications are subject to change without prior notice.
- For the power supply and power consumption, refer to the label
attached to the player.
- Weight and dimensions are approximate.
18
•
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
•
Because AACS (Advanced Access Content System) is approved as the content
protection system for the Blu-ray Disc format, similar to use of CSS (Content Scramble
System) for the DVD format, certain restrictions are imposed on playback, analogue
signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending
on your time of purchase as those restrictions may be adopted and/or changed by
AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems for the Blu-ray Disc format, which
imposes certain restrictions including playback restrictions for BD-ROM Mark and/or
BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact SAMSUNG customer care centre.
•
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you
should only connect your Player directly to your TV, not to a VCR. Connecting to a
VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs.
•
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes, Blu-
ray Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
•
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibited use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology
is provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.
com. To request additional information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San
Diego CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance
Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide
patents issued and pending as well as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright
2004-2013 Verance Corporation. All rights reserved by Verance. Reverse engineering
or disassembly is prohibited.
19
Licence
•
Manufactured under licence from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
•
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS
and the Symbol together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
•DivX
- ABOUT DIVX VIDEO: DivX
®
is a digital video format created by
DivX, LLC, a subsidiary of Rovi Corporation. This is an official
DivX Certified
®
device that has passed rigorous testing to verify
that it plays DivX video. Visit divx.com for more information and software tools
to convert your files into DivX videos.
- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
- DivX Certified
®
to play DivX
®
video up to HD 1080p, including premium content.
DivX
®
, DivX Certified
®
and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274.
•
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
2.0+Digital Out
•Oracle and Java are registered trademarks of Oracle
and/or its affiliates. Other names may be trademarks of
their respective owners.
•Open Source Licence Notice
- In the case of using open source software, Open Source Licences are
available on the product menu.
•Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray
Disc Association.
20
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
