Additional Information
Specication
Power
consumption
Refer to the main label.
AC adapter
• Model : DA-50F25
• Manufacturer : Asian Power
Devices Inc.
• Input : 100 - 240 V ~
50 - 60 Hz
• Output : 25 V 0 2 A
Dimensions
(W x H x D)
Approx.
1446.0 mm x 150.0 mm x
32.5 mm
Bus Power
Supply
(USB)
5 V 0 500 mA
Amplier
(Total RMS
Output
power)
420 W RMS
Designandspecicationsaresubjecttochange
without notice.
Installing the stand
Fix the hooks of the unit on the stands as shown
below.
When installing the sound bar with a stand,
install it so that it does not cover the TV’s
remote sensor or screen.
To enjoy content containing Dolby Atmos® and
DTS:X®, the connected device and content must
support Dolby Atmos® and DTS:X®.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
This offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment
type Wireless Sound Bar is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be
installed and operated with a minimum distance of 20
cm between the device and the body.
IMPORTANT SAFETY NOTICE
Thecordgripfortheplugttedtothisproductis
built into the existing power cord as supplied. If, for
any reason you need to shorten the cord,
DO NOT RE-USE THE PLUG
A new plug must be used to ensure your
continued safety by securing the plug to the
power cord in accordance with Plug & Socket
Regulations 1994.
MODEL
GX
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.2012_Rev03
SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions of advanced features, visit http://www.lg.com and
then download Owner’s Manual. Some of the content in this manual may
differ from your unit.
Front Panel
1 (Standby) ··········Switches the unit ON or OFF.
F (Function) ························Selects function.
o/p (Volume)····················Adjustsvolume.
Rear Panel
DC IN····················· Connect to the AC adapter.
USB Port ····················Connect to a USB device.
OPTICAL IN ···········Connect to an optical device.
HDMI IN··········Connect to device with HDMI OUT.
HDMI OUT (TV eARC/ARC) ······ Connect to a TV.
Make sure to properly align and connect
the optical cable; improper alignment may
causedamagetothejack.
Rear Speakers Ready
Ready for surround sound with Rear
Speakers Kit sold separately. (SPK8-S)
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar.
• The sound bar and wireless subwoofer will be
automatically connected. The subwoofer’s
green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press PAIRING on the rear of the wireless
subwoofer.
• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the PAIRING.)
b Turn on the sound bar.
• Pairing is completed. The green LED on the
rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
!
1 m
TV Connection
Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
TV
HDMI (ARC) Connection
a Connect the sound bar to the TV using HDMI
cable.
b Set up [External Speaker (HDMI ARC)] on your
TV setting menu.
TV
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal
has a higher priority.
Additional Device Connection
a Connect to the external device like as follow.
TV
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing F repeatedly.
Remote control
Replacement of Battery
C/V: Skip/Search
N: Play/Pause
- Bluetooth connection lock (BT LOCK): Select
the Bluetooth function by pressing F repeatedly.
Long press N and press it again to limit
Bluetooth connection to only BT and LG TV.
SOUND EFFECT: Selects a sound effect mode.
- TV remote: Long press SOUND EFFECT and
press it again to use TV remote control.
FOLDER W/S: Searches a folder.
J:Displaystheinformationofale,aninputsource
or connected Bluetooth device name.
- Auto Power ON/OFF: Long press J and press
it again.
: Adjustssoundlevelofeachspeaker.
- Surround sound: Long press
and press it
again.
REPEAT:Listenstoyourlesrepeatedlyorrandomly.
This product provides screws and wall
plugstoxthewallbrackettothewall.
Please check the installation method
through Owner’s manual on the website
(www.lg.com).
ENGLISH
GX.DHKGLLK_SIM (Sheet)_ENG_HTC_MFL71771624.indd 1-4 2020-12-16 7:51:38