Sony KDL-55X4500 ユーザーマニュアル

GB

CT

KDL-70X4500

KDL-55X4500

KDL-46X4500

KDL-40X4500

LCD Digital Colour TV

Operating Instructions

操作手冊

2

GB

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this

manual thoroughly and retain it for future

reference.

For KDL-70X4500 Users

Refer to “KDL-70X4500 Start-up Guide”

for details about the installation.

Trademark information

HDMI, the HDMI logo and High-

Definition Multimedia Interface are

trademarks or registered trademarks of

HDMI Licensing LLC.

DLNA and DLNA CERTIFIED are

trademarks and/or service marks of Digital

Living Network Alliance.

Adobe is a registered trademark or a

trademark of Adobe Systems Incorporated

in the United States and/or other countries.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

“BRAVIA” and are

trademarks of Sony Corporation.

“XMB” and “xross media bar” are

trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

The typefaces used on the screen display

are solely developed by DynaComware.

This television is designed for

use in Hong Kong and ensured

the usage in Hong Kong only.

3

GB

Table of Contents

Start-up Guide 4

Safety Information ............................................................................................................................9

Precautions .....................................................................................................................................11

Remote and TV Controls/Indicators..............................................................................................12

Watching TV

Watching TV ....................................................................................................................................16

Using the Digital Electronic Programme Guide (EPG) (for digital channels only) .................18

Using the Favourite List ................................................................................................................19

Using Optional Equipment

Connecting Optional Equipment ...................................................................................................20

Viewing Pictures from a Connected Equipment ..........................................................................23

Playing back Photo/Music via USB ...............................................................................................24

Using BRAVIA Sync with Control for HDMI..................................................................................26

Operating Optional Equipment Using the TV Remote.................................................................27

Using Home Network Features

Connecting to the Network ............................................................................................................30

Enjoying Photo/Music Files via the Network................................................................................30

Checking the Network Connection................................................................................................32

Adjusting the Server Display Settings..........................................................................................32

Using Menu Functions

Navigating through TV Home Menu on XMB™ ............................................................................34

TV Settings Menu............................................................................................................................35

Additional Information

Installing the Accessories (Wall-Mount Bracket).........................................................................48

Specifications..................................................................................................................................51

Troubleshooting..............................................................................................................................53

Before operating the TV, please read “Safety Information” (page 9). Retain this manual for future reference.

GB

4

GB

Start-up Guide

1: Checking the accessories

AC power cord* (1)

Stand (1) and screws (4) (KDL-46X4500/40X4500

only)

Remote RMF-GD001 (1)

Size AA batteries (R6 type) (2)

* Do not remove the ferrite cores.

To replace the speaker grille (for KDL-

55X4500/46X4500/40X4500)

The speaker grille unit can be replaced with

others that are sold separately. However, do

not remove the unit except to replace it. For

details, see the instructions supplied with

speaker grille units.

2: Attaching the stand (for

KDL-46X4500/40X4500)

~

• If using an electric screwdriver, set the tightening

torque at approximately 1.5 N·m (15 kgf·cm).

5

GB

Start-up Guide

3: Connecting an antenna/

cable/VCR

Connecting an antenna/cable

Connecting an antenna/cable and VCR

4: Preventing the TV from

toppling over

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.

2 Install a machine screw (M6 × 12–15, not

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord.

Antenna cable

(not supplied)

Antenna cable

(not supplied)

Antenna cable

(not supplied)

AV cable

(not

supplied)

VCR

S-Video

cable

(not

supplied)

Antenna

cable (not

supplied)

6

GB

5: Bundling the cables

~

• Do not bundle the AC power cord together with

other cables.

6: Performing the initial

set-up

KDL-40X4500 KDL-46X4500

KDL-55X4500

4

Press and hold RETURN while holding

down TV on the remote.

“Remote Control Set-up” is completed and

the screen changes as above.

5

徽

㌋

妑

⫾ (R

em

ote

Control Set-up)

F

ir

st, p

l

e

a

s

e

p

re

s

a

n

d

h

o

l

d

the

T

V

k

e

y

,

th

e

n

w

h

il

e

h

o

ld

in

g

t

h

is

key

p

re

s

ed

, pre

s

a

n

d

h

o

l

d

t

h

e

R

E

T

U

R

N

k

e

y

.

T

h

e

re

m

o

te

c

o

n

tr

o

l

c

a

n

o

n

ly

b

e

r

eg

is

tere

d

w

i

th on

e

T

V

s

e

t

.

棺

€

濇

娯

㉭

ẳ

U

W

拙

濇

䂚

⻰

⚌

㉭

ẳ

姖

拙

ᵱ

㒢

䗨

⍰

㖦

濇

⃱

㉭

ẳ

SF

U

VS

O

拙

Ɂ

徽

㌋

⍎

偡

堏

䗟

奼

䒌

㔠

ᵤ

⍔

晟

壺

㧃

Ɂ

嵗

徲

)S

kip

)

ᵯᵤ㫉 )

Next)

Push and lift the cover to open.

7

GB

Start-up Guide

~

• When the screen does not change after “Remote

Control Set-up” is completed in step 4, and the

BD, DVD, AMP and TV function buttons on the

remote flash several times at the same time,

replace the batteries of the remote with new ones.

6

Select “Home” for the best TV settings to

use the TV in the home.

7

Make sure that the antenna is connected.

The TV starts searching for all available

digital channels. Do not press any buttons

on the TV or remote while proceeding.

8

The TV starts searching for all available

analogue channels. Do not press any

buttons on the TV or remote while

proceeding.

9

If you want to change the order of

analogue channels, follow the steps in

“Programme Sorting” on page 43.

If your TV cannot receive digital

broadcasts, the “Clock Set” menu appears

on the screen (page 35).

10

_____

Prog Service Name

Programme Sorting

Select channel

11

12

13

8

GB

Adjusting the viewing angle

of the TV (for KDL-55X4500/

46X4500/40X4500)

This TV can be adjusted within the angles

shown below.

Adjust the angle left and right (swivel)

Detaching the Table-Top

Stand from the TV

~

• Remove the screws guided by the arrow marks

of the TV.

• Do not remove the Table-Top Stand for any reason

other than listed below.

– To wall-mount the TV.

– To put the TV in the carton at time of purchase

(KDL-46X4500/40X4500 only).

Top view

Front

9

GB

Safety

Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below

in order to avoid any risk of fire, electrical shock or damage and/or

injuries.

Installation

s The TV set should be installed near an easily accessible AC

power outlet.

s Place the TV set on a stable, level surface to avoid it from

falling down and cause personal injury or damage to the TV.

s Only qualified service personnel should carry out wall

installations.

s For safety reasons, it is strongly recommended that you use

Sony accessories, including:

KDL-55X4500/46X4500/40X4500:

– Wall-mount bracket SU-WL500/WL50B

s Be sure to use the screws supplied with the Wall-mount bracket

when attaching the mounting hooks to the TV set. The supplied

screws are designed so that they are 8 mm to 12 mm in length

when measured from the attaching surface of the mounting

hook.

The diameter and length of the screws differ depending on the

Wall-mount bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

Transporting

s Before transporting the TV

set, disconnect all cables.

s Two or three people are

needed to transport a large TV

set.

s When transporting the TV set

by hand, hold it as shown on

the right. Do not put stress on

the LCD panel and the frame

around the screen.

s When lifting or moving the

TV set, hold it firmly from the

bottom.

s When transporting the TV set,

do not subject it to jolts or

excessive vibration.

s When transporting the TV set

for repairs or when moving,

pack it using the original

carton and packing material.

Ventilation

s Never cover the ventilation holes or insert anything in the

cabinet.

s Leave space around the TV set as shown below.

s It is strongly recommended that you use a Sony wall-mount

bracket in order to provide adequate air-circulation.

Installed on the wall

Installed with stand

s To ensure proper ventilation and prevent the collection of dirt

or dust:

– Do not lay the TV set flat, install upside down, backwards,

or sideways.

– Do not place the TV set on a shelf, rug, bed or in a closet.

– Do not cover the TV set with a cloth, such as curtains, or

items such as newspapers, etc.

– Do not install the TV set as shown below.

Mounting Hook

Hook attachment on rear of TV set

Screw (supplied with the Wall-mount

bracket)

8 mm – 12 mm

For KDL-46X4500/40X4500

For KDL-55X4500

Be sure to hold the bottom of the panel, and not the

transparent part, speaker, or speaker grille area. Do not

compress the panel’s speaker grille area.

30 cm

10 cm

Leave at least this space around the set.

30 cm

10 cm 10 cm

6 cm

Leave at least this space around the set.

Air circulation is blocked.

Wall Wall

(Continued)

10

GB

AC power cord

Handle the AC power cord and outlet as follows in order to avoid

any risk of fire, electrical shock or damage and/or injuries:

– Use only Sony supplied AC power cords, not those of other

brands.

– Insert the plug fully into the AC power outlet.

– Operate the TV set on a 220–240 V AC supply only.

– When wiring cables, be sure to unplug the AC power cord for

your safety and take care not to catch your feet on the cables.

– Disconnect the AC power cord from the AC power outlet before

working on or moving the TV set.

– Keep the AC power cord away from heat sources.

– Unplug the AC power plug and clean it regularly. If the plug is

covered with dust and it picks up moisture, its insulation may

deteriorate, which could result in a fire.

Notes

s Do not use the supplied AC power cord on any other equipment.

s Do not pinch, bend, or twist the AC power cord excessively.

The core conductors may be exposed or broken.

s Do not modify the AC power cord.

s Do not put anything heavy on the AC power cord.

s Do not pull on the AC power cord itself when disconnecting the

AC power cord.

s Do not connect too many appliances to the same AC power

outlet.

s Do not use a poor fitting AC power outlet.

Prohibited Usage

Do not install/use the TV set in locations, environments or

situations such as those listed below, or the TV set may malfunction

and cause a fire, electrical shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, on a ship or other

vessel, inside a vehicle, in medical institutions, unstable locations,

near water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively dusty; where insects may

enter; where it might be exposed to mechanical vibration, near

flammable objects (candles, etc). The TV set shall not be exposed

to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the cabinet removed, or

with attachments not recommended by the manufacturer.

Disconnect the TV set from AC power outlet and antenna during

lightning storms.

Broken pieces:

s Do not throw anything at the TV set. The screen glass may

break by the impact and cause serious injury.

s If the surface of the TV set cracks, do not touch it until you have

unplugged the AC power cord. Otherwise electric shock may

result.

When not in use

s If you will not be using the TV set for several days, the TV set

should be disconnected from the AC power for environmental

and safety reasons.

s As the TV set is not disconnected from the AC power when the

TV set is just turned off, pull the plug from the AC power outlet

to disconnect the TV set completely.

s However, some TV sets may have features that require the TV

set to be left in standby to work correctly.

For children

s Do not allow children to climb on the TV set.

s Keep small accessories out of the reach of children, so that they

are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the AC power cord immediately if

any of the following problems occur.

Ask your dealer or Sony service centre to have it checked by

qualified service personnel.

When:

– AC power cord is damaged.

– Poor fitting of AC power outlet.

– TV set is damaged by being dropped, hit or having something

thrown at it.

– Any liquid or solid object falls through openings in the cabinet.

11

GB

Precautions

Viewing the TV

s View the TV in moderate light, as viewing the TV in poor light

or during long period of time, strains your eyes.

s When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

LCD Screen

s Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue, or

green) may appear constantly on the LCD screen. This is a

structural property of the LCD screen and is not a malfunction.

s Do not push or scratch the front filter, or place objects on top of

this TV set. The image may be uneven or the LCD screen may

be damaged.

s If this TV set is used in a cold place, a smear may occur in the

picture or the picture may become dark. This does not indicate

a failure. These phenomena disappear as the temperature rises.

s Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

s The screen and cabinet get warm when this TV set is in use.

This is not a malfunction.

s The LCD screen contains a small amount of liquid crystal.

Mercury is sometimes contained depending on the kind of

fluorescent tubes. Follow your local ordinances and regulations

for disposal.

Handling and cleaning the screen surface/

cabinet of the TV set

Be sure to unplug the AC power cord connected to the TV set from

AC power outlet before cleaning.

To avoid material degradation or screen coating degradation,

observe the following precautions.

s To remove dust from the screen surface/cabinet, wipe gently

with a soft cloth. If dust is persistent, wipe with a soft cloth

slightly moistened with a diluted mild detergent solution.

s Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol, benzene,

thinner or insecticide. Using such materials or maintaining

prolonged contact with rubber or vinyl materials may result in

damage to the screen surface and cabinet material.

s Periodic vacuuming of the ventilation openings is

recommended to ensure to proper ventilation.

s When adjusting the angle of the TV set, move it slowly so as to

prevent the TV set from moving or slipping off from its table

stand.

Optional Equipment

Keep optional components or any equipment emitting

electromagnetic radiation away from the TV set. Otherwise picture

distortion and/or noisy sound may occur.

Batteries

s Observe the correct polarity when inserting batteries.

s Do not use different types of batteries together or mix old and

new batteries.

s Dispose of batteries in an environmentally friendly way.

Certain regions may regulate the disposal of batteries. Please

consult your local authority.

s Handle the remote with care. Do not drop or step on it, or spill

liquid of any kind onto it.

s Do not place the remote in a location near a heat source, a place

subject to direct sunlight, or a damp room.

12

GB

Remote and TV Controls/Indicators

Remote and TV controls

Button Description

1 TV "/1 (TV

standby)

Press to turn the TV on and off from standby mode.

2 1 (Power) Press to turn the TV on or off.

~

• To disconnect the TV completely, turn off the TV,

then unplug the AC power cord from the AC

power.

3 (Picture

freeze)

Freezes the TV picture.

~

• This function is not available for a PC input

source.

4 AUDIO In analogue mode: Press to change the dual sound

mode (page 38).

In digital mode: Press to change the language to be

used for the programme currently being viewed

(page 45).

The supplied remote does not function until you register it to the

TV.

~

• To register the remote to the TV for the first time, follow the steps in “6:

Performing the initial set-up” on page 6.

• To re-register the remote to the TV, see “Remote Control Set-up” in “Set-

up” on page 43.

•When the TV function button on the remote flashes three times during

operation in TV mode, replace the batteries of the remote with new ones.

z

•The number 5, N, PROG + and AUDIO buttons on the remote have a

tactile dot. Use the tactile dots as a reference when operating the TV.

A button or touch sensors on the TV will work the same as those on

the remote.

* In the TV menu, these touch sensors will work as F/f/G/g/.

13

GB

5 (Twin

Picture/PIP)

Displays two pictures simultaneously (page 24).

6 (Subtitle

setting)

Press to change the subtitle language (page 45) (in

digital mode only).

7 / (Info/

Text reveal)

In digital mode: Displays details of the current and

next programme one by one.

In analogue mode: Displays information. Press

once to display the current channel number and

Wide Mode. Press again to display clock

information. Press a third time to remove the

display from the screen.

In Text mode: Reveals hidden information (e.g.

answers to a quiz).

8 / (Input

select/Text

hold)

In TV mode: Press to display a list of inputs

(page 23).

In Text mode: Press to hold the current page.

9

F/f/G/g/ Press F/f/G/g to move the on-screen cursor. Press

to select/confirm the highlighted item.

When playing a photo file: Press to pause/start a

slideshow. Press F/G to select the previous file.

Press f/g to select the next file.

When playing a music file: Press to pause/start

the playback. Press and hold G/g to fast forward/

fast reverse, then release the button at the point

where you want to resume playback. Press F to

start playback from the beginning of the current

file. Press f to go to the next file.

0 OPTIONS Press to display a list that contains “Device

Control”, or shortcuts to some setting menus. Use

the “Device Control” menu to operate equipment

that is compatible with control for HDMI.

The listed options vary depending on the input

source.

qa HOME Press to display the TV Home menu (page 34).

qs Coloured

buttons

When the coloured buttons are available, an

operation guide appears on the screen. Follow the

operation guide to perform a selected operation

(page 18, 19).

qd Number

buttons

In TV mode: Press to select channels. For channel

numbers 10 and above, press the next digit quickly.

In Text mode: Press to enter a page number.

qf

(Favourite)

Press to display the Favourite List that you have

specified (page 19).

qg PROG +/–/

/

In TV mode: Press to select the next (+) or

previous (–) channel.

In Text mode: Press to select the next ( ) or

previous ( ) page.

qh (Previous

channel)

Press to return to the channel that was last viewed

(for more than five seconds).

(Continued)

14

GB

qj % (Mute) Press to mute the sound. Press again to restore the

sound.

z

• In standby mode, if you want to turn on the TV

without sound, press this button.

qk 2 +/–

(Volume)

Press to adjust the volume.

ql / (Text) Press to display text information. Text information

is displayed only when it is available.

w; RETURN Press to return to the previous screen of the

displayed menu.

When playing a photo/music file: Press to stop the

playback. (The display returns to the file or folder

list.)

wa GUIDE /

(EPG)

Press to display the Digital Electronic Programme

Guide (EPG) (page 18).

ws ANALOG Press to display the analogue channel that was last

viewed.

wd DIGITAL Press to display the digital channel that was last

viewed.

wf THEATRE You can set Theatre Mode to on or off. When

Theatre Mode is set to on, the optimum audio

output (if the TV is connected with an audio

system using an HDMI cable) and picture quality

for film-based contents are automatically set.

z

• If you turn the TV off, Theatre Mode is also

turned off.

• “Control for HDMI” (BRAVIA Sync) is only

available with the connected Sony equipment that

has the BRAVIA Sync or BRAVIA Theatre Sync

logo or is compatible with control for HDMI.

wg SYNC MENU Displays the menu of connected HDMI equipment.

While viewing other input screens or TV

programmes, “HDMI Device Selection” is

displayed when the button is pressed.

z

• “Control for HDMI” (BRAVIA Sync) is only

available with the connected Sony equipment that

has the BRAVIA Sync logo or is compatible with

control for HDMI.

wh (Wide

Mode)

Press to change the Wide Mode (page 17).

wj Buttons for

using

optional

equipment

You can operate the equipment connected to the

TV (page 21, 26, 27).

15

GB

~

• Make sure that the TV is completely turned off before unplugging the AC power cord. Unplugging the AC

power cord while the TV is turned on may cause the indicator to remain lit or may cause the TV to

malfunction.

The operation guide provides help on how to operate the TV using the remote, and is displayed at

the bottom of the screen. Use the remote buttons shown on the operation guide.

Indicators

Indicator Description

1 Light sensor

(page 43)

Do not put anything over the sensor, doing so may affect its function.

2 " (Power) Lights up in green when the TV is on.

3 1 (Standby) Lights up in red when the TV is in standby mode.

4 (Picture Off/

Timer)

Lights up in green when you select “Picture Off” (page 42).

Lights up in orange when you set the timer (page 18, 35).

5 Remote control

sensor

Receives signals from the remote.

Do not put anything over the sensor. The sensor may not operate properly.

About the operation guide on the TV screen

Operation Guide

Example: Press or RETURN (see 9 on page 13 or w; on page 14).

16

GB

Watching TV

1 Press 1 on the TV to turn on the TV.

When the TV is in standby mode (the 1

(standby) indicator on the TV front panel

is red), press TV "/1 on the remote to

turn on the TV.

2 Press DIGITAL to switch to digital mode,

or press ANALOG to switch to analogue

mode.

The available channels vary depending on

the mode.

3 Press the number buttons or PROG +/– to

select a TV channel.

To select channel numbers 10 and above

using the number buttons, enter the next

digit quickly.

To select a digital programme using the

Digital Electronic Programme Guide

(EPG), see page 18.

In digital mode, an information banner

appears briefly. Each time you press

, the banner changes cyclically as

follows:

Current programme information t Next

programme information t No banner

The following icons may be indicated on

the banner.

: Radio service

: Scrambled/Subscription service

: Subtitles available

: Subtitles available for the hearing

impaired

: Multiple audio languages available

: Recommended minimum age for

current programme (ages from 4 to

18)

: Parental Lock

2

3

17

GB

Watching TV

To change the Wide Mode manually

Press repeatedly to select the desired Wide

Mode.

* Parts of the top and bottom of the picture may be cut off.

You can adjust the vertical position of the picture. Press

F/f to move the picture up or down (e.g. to read

subtitles).

~

• When you select “Wide Zoom”, some characters

and/or letters at the top and the bottom of the

picture may not be visible. In such a case, adjust

“Vertical Size” in the “Screen” menu (page 39).

z

• When “Auto Wide” (page 38) is set to “On”, the

TV will automatically select the best mode to suit

the input from an external equipment.

• If 720p, 1080i or 1080p source pictures are

displayed with black borders on the screen edges,

select “Wide Zoom” or “Zoom” to adjust the

pictures.

Wide Zoom*

Enlarges the centre

portion of the picture. The

left and right edges of the

picture are stretched to fill

the 16:9 screen.

Normal

Displays the 4:3 picture in

its original size. Side bars

are shown to fill the 16:9

screen.

Full

Stretches the 4:3 picture

horizontally, to fill the

16:9 screen.

Zoom*

Displays the cinemascopic

(letter box format) picture

in the correct proportion.

18

GB

Using the Digital Electronic Programme Guide (EPG)

(for digital channels only)

1 In digital mode, press GUIDE.

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

D

igital Electronic Programme Guide (EPG)

To Do this

View a programme Press F/f/G/g to select a programme, then press .

Turn off the EPG Press GUIDE.

Sort programme information by

category

– Category list

1 Press the blue button.

2 Press F/f to select a category, then press .

Set a programme to be displayed

automatically on the screen when it

starts

– Reminder

1 Press F/f/G/g to select a future programme you want to display,

then press .

2 Press F/f to select “Reminder”, then press .

A c symbol appears next to the programme’s information. The

indicator on the TV front panel lights up in orange.

~

• If you switch the TV to standby mode, the TV will automatically

turn on when the programme starts.

Cancel a reminder

– Timer list

1 Press .

2 Press F/f to select “Timer list”, then press .

3 Press F/f to select the programme you want to cancel, then

press .

4 Press to select “Cancel Timer”.

A display appears to confirm that you want to cancel the

programme.

5 Press G/g to select “Yes”, then press .

19

GB

Watching TV

Using the Favourite List

Analogue Favourites

The Favourite feature lets you select

programmes from a list of up to 16 favourite

channels that you specify.

1 In analogue mode, press .

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

Digital Favourites

You can specify up to four of your favourite

channel lists.

1 In digital mode, press .

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

A

nalogue Favourite List

To Do this

Watch a channel Press .

Turn off the Favourite list Press .

Add a current channel to the

Favourite list

Press F/f to select “Add to Favourites”, then press .

Remove a channel from the Favourite

list

1 Press F/f to select “Edit Favourites”, then press .

The “Favourite Set-up” screen appears.

2 Press F/f to select the channel number, then press .

3 Press F/f to select “– –”, then press .

Digital Favourite List

To Do this

Turn off the Favourite list Press RETURN.

Add or remove channels in a

Favourite list

1 Press the blue button.

Go to step 2 when you add channels for the first time or the

Favourite list is empty.

2 Press the yellow button to select the Favourite list to edit.

3 Press F/f to select the channel to add or remove, then press .

Watch a channel

1 Press the yellow button to select a Favourite list.

2 Press F/f to select a channel, then press .

Remove all channels from a Favourite

list

1 Press the blue button.

2 Press the yellow button to select the Favourite list to edit.

3 Press the blue button.

4 Press G/g to select “Yes”, then press .

20

GB

Using Optional Equipment

Connecting Optional Equipment

You can connect a wide range of optional equipment to your TV.

For service

use only

Digital still camera

Camcorder

USB storage media

Camcorder

Headphones

Camcorder

DVD player

Blu-ray disc player

Audio system

PC (HDMI-output)

PC

DIGITAL MEDIA

PORT adaptor

Hi-Fi audio equipment

Home theatre system

with digital input

Video game equipment

DVD player DVD recorder

DVD player with

component output

VCR VCR

Broadband router

ページが読み込まれています...

Sony KDL-55X4500 ユーザーマニュアル

このマニュアルも適しています

Sony KDL-55X4500 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント