Philips DVDR3408 ユーザーマニュアル

3408

User Manual 4

58

2

LASER

Type Semiconductor laser

InGaAlP (DVD)

AIGaAs (CD)

Wave length 658 nm (DVD)

790 nm (CD)

Output Power 30 mW(DVD±RW write)

1.0 mW (DVD read)

1.0 mW (CD read)

Beam divergence 84 degrees (DVD)

61 degrees (CD)

CAUTION

Use of controls or adjustments or

performance of procedures other than

herein may result in hazardous radiation

exposure or other unsafe operation.

Due to the inconsistency of disc formats provided

by various disc manufacturers, your DVD system/

player/recorder may require a playability

enhancement or upgrade. As DVD technology

advances, these enhancement will become

common and will be easy to complete.

Go to www.philips.com/support for software upgarde.

En raison de la diversité des formats utilisés par les

fabricants, votre système DVD peut nécessiter

l'ajout de périphériques ou une mise à niveau

logicielle. Au fur et à mesure des progrès de la

technologie DVD, ces périphériques se font de plus

en plus courants et aisés à intégrer. Pour

télécharger la mise à niveau logicielle, visitez le site

www.philips.com/support.

Debido a los diferentes formatos de discos

disponibles en el mercado, es posible que deba

realizar mejoras o actualizaciones en el sistema de

DVD relativas a las funciones de reproducción.

Conforme la tecnología DVD avanza, estas mejoras

estarán al alcance de todo tipo de usuarios y se

podrán llevar a cabo fácilmente. Visite la página

“www.philips.com/support” para buscar

información sobre actualizaciones de software.

Da das Disk-Format je nach Hersteller verschieden

ist, ist für Ihr DVD-System möglicherweise die

Erweiterung der Spielbarkeit oder eine

Aktualisierung erforderlich. Da die DVD-Technologie

sich ständig weiterentwickelt, werden sich diese

Erweiterungen durchsetzen und einfach auszuführen

sein. Gehen Sie zu für Ihre Software-Aktualisierung

zu „www.philips.com/support“.

Doordat fabrikanten verschillende schijfindelingen

aanbieden, moet uw dvd-systeem mogelijk worden

geüpgradet of uitgebreid. Naarmate de

dvd-technologie zich verder ontwikkelt, zullen

deze uitbreidingen normaal worden en zult u ze

gemakkelijk kunnen uitvoeren. Ga naar

"www.philips.com/support" om uw software te

upgraden.

A causa della differenza di formato tra i dischi

forniti dai vari produttori, il sistema DVD potrebbe

richiedere un potenziamento o aggiornamento

della riproducibilità. Col progredire della tecnologia

DVD, questi potenziamenti diverranno comuni e

facili da implementare. Visitare

“www.philips.com/support” per scaricare gli

aggiornamenti del software.

For Customer Use:

Read carefully the information located at

the bottom or rear of your DVD Recorder

and enter below the Serial No. Retain this

information for future reference.

Model No. DVD RECORDER DVDR 3408

Serial No. _______________

Microsoft, Windows Media, and the

Windows logo are trademarks, or registered

trademarks of Microsoft Corporation in the

United States and/or other countries.

English

3

Index

English ..................................................... 4

This product incorporates copyright

protection technology that is protected

by US patents. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and

other limited viewing uses only unless other-

wise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

U.S. Patent Number 4,631,603; 4,819,098;

4,907,093; 5,315,448; and 6,516,132.

------------------------------- 58

English

4

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby

Laboratories.

DivX®, DivX Certied, and associated

logos are trademarks of DivX Networks, Inc

and are used under license.

This connection is also known as ‘FireWire’

and ‘IEEE 1394.’ This connection is used for

the transfer of high bandwidth digital signals

as used by digital video (DV) camcorders.

Audio and video signals are transmitted using

a cable.

Philips DVD recorders support ‘dual media’

recording – the ability to create recordings

on + and - discs (DVD+R/+RW, DVD+R DL,

DVD-R/-RW).

Special Features

English

5

What kind of disc should I use for

recording?

You can only record on a DVD-R，DVD+R，

DVD-RW ，DVD+RW and DVD+R DL discs.

DVD±R/±RW is the most compatible

recordable DVD format on the market today.

They are fully compatible with most of the

existing DVD-Video players and DVD-ROM

drives in computers.

What is the capacity of a

DVD±R/±RW disc?

4.7GB, or equivalent to 6CDs. You can store

only one hour of recordings on a single disc at

the highest quality (DVD standard) and about

6 hours recordings at the lowest quality (VHS

standard).

The recording mode indicates the number of

hours that will t on a single disc.

What is the difference between

DVD±R and DVD±RW?

DVD±R is “recordable” and DVD±RW is

“erasable” and “rewritable”. With a DVD±R,

you can record multiple sessions on the same

disc, but when the disc is full, you cannot

record any more on the disc. The DVD±RW

allows you to record over the same disc

repeatedly.

What is DV?

Using DV, also known as i.LINK, you can

connect a DV-equipped camcorder to this

recorder using a single DV cable for input and

output of audio, video, data and control signals.

– This recorder is only compatible with

DV-format (DVC-SD) camcorders. Digital

satellite tuners and Digital VHS video

recorders are not compatible.

– You cannot connect more than one DV

camcorder at one time to this recorder.

– You cannot control this recorder from the

external equipment connected via the

DV IN jack.

Can I copy a VHS tape or DVD

from an external player?

Yes, but only if the VHS tape or DVD is not

copy protected.

What are Titles and Chapters?

A DVD disc contains Titles and Chapters,

which are similar to the Titles and Chapters of

a book. A Title is often a complete movie and

is broken down into Chapters, or individual

scenes from the movies.

Programs are recorded as a single title; it may

consist of one chapter or a few chapters

within a title, depending on the recording

settings.

How do I set up Titles and Chapters?

The DVD recorder automatically creates a

new Title every time you start a new

recording. You can then add Chapters to these

recordings manually or have them

automatically inserted at 5-minute intervals.

What does “nalizing” a disc do?

Finalizing a disc locks the disc so it can no

longer be recorded and is only required for

DVD±R/+R DL. It will then be compatible with

virtually any DVD player. To close a disc

without nalizing it, simply stop recording and

eject the disc. You will still be able to record

on the disc if there is room for more

recordings.

How good is the quality of the

recording?

There are a few quality levels to choose from,

ranging from “1 hour mode” (High Quality) to

“6 hours mode” (VHS quality). Press REC

MODE button on the remote control to

choose the quality level that best suits your

purpose and the length of material.

Frequently Asked Questions

Maximun Rcording

Time per disc

1 hour mode

2 hours mode

2.5 hours mode

3 hours mode

4 hours mode

6 hours mode

HQ(Hight Quality)

SP(DVD quality -Standard Play)

SP+(DVD quality- Stand play plus)

LP(VHS quality- Long play)

EP(VHS Extended Play)

SLP(VHS quality-Super Long Play)

1 hour

2 hours

2.5 hours

3 hours

4 hours

6 hours

Values are estimates only. Parts of the HDD storage capacity will be reserved for

the operations of this recorder and time shifting.



English

6

Contents

Index ................................................3

Special Features ............................. 4

Frequently Asked Questions ........5

Care and Safety Information

Setup ..............................................................8

Cleaning discs ..............................................8

About recycling ...........................................8

General Information

Introduction .................................................9

Accessories supplied ..................................9

Region codes ................................................9

Copyright notice .........................................9

Basic Connections - DVD recorder

Step 1: Connecting the antenna cables 10

Step 2: Connecting the video cable .....11

Option 1: Using Video(CVBS) jack ........11

Option 2: Using S-Video jack ..................11

Option 3 : Using Component Video

jack ..................................................................11

Step 3: Connecting the audio cables ...12

Option 1: Using Audio jacks .....................12

Option 2: Using Coaxial jack ....................12

Optional Connections

Connecting to a Cable Box or

Satellite Receiver ......................................13

Connecting to a VCR or other

similar device..............................................14

Connecting to a VCR and Cable Box/

Satellite Receiver ......................................15

Connecting a camcorder to the

front jacks ...................................................16

Option 1: Using DV IN jack ......................16

Option 2: Using S-VIDEO In or

VIDEO In jack ...............................................16

Main Unit ....................................... 17

Jacks behind the ap ....................................17

Remote control ....................... 18-20-20

Display window ............................. 21

Getting Started

Step 1 : Inserting Batteries .................... 22

Using the remote control to operate

the system ......................................................22

Step 2 : Finding your viewing channel 22

Step 3 : TV channel programming ....... 23

Automatic TV channel search ..................23

Modifying Channel Information ...............24

Sorting the TV channels .............................25

Step 4 : Setting the time & date ...... 25

Recording

Discs for recording .................................. 26

Recording settings .................................. 26

Auto Chapter Markers ...............................27

Default Source ..............................................27

Default Recording Quality .........................27

Manual recording ................................ 28

One Touch Recording - automatic

turn-off ....................................................... 28

About timer recording ........................... 29

Timer recording (manually)................... 29

Setting a timer recording from an

external Cable Box/ Satellite Receiver ..30

Changing/ Deleting a timer recording .31

Watching another TV channel

during recording ........................................31

Editing/Finalizing Recording

About Disc editing ................................... 32

Accessing disc editing menu .................. 32

Rename disc ..................................................33

Erase disc (DVD±RW only) ......................33

Record a new title ........................................33

Overwrite disc (DVD±RW only) ............33

Lock/Unlock disc (DVD±RW only) ........34

English

7

Contents

Playing your recordings (DVD±R/±RW

/+R DL) on other DVD players............ 34

About title editing ................................... 35

Accessing title editing menu ................. 35

Editing video ..................................................35

Rename title ..................................................36

Erase title .......................................................36

Overwrite title (DVD±RW only) ............36

Overwrite from the selected title ..........36

Append recording .......................................36

About video editing ............................ 36

Accessing video edit ................................ 37

Accessing video editing menu............... 37

Selecting a title ..............................................38

Selecting a chapter .......................................38

Creating chapter marker ...........................38

Hiding an unwanted chapter .....................39

Changing Index Picture ..............................39

Splitting a title (DVD±RW only) ..............39

Playback

Playable discs ............................................. 40

Inserting a disc .......................................... 40

Starting disc playback...............................41

Playing a DVD video disc ...........................41

Playing a (Super) Video CD .......................41

Playing an audio CD ....................................41

Playing a DVD±R/±RW /+R DL disc .......41

Playing a Divx disc........................................42

Playing an MP3 disc ......................................42

Playing a picture disc (or musical

slide show)............................................42-43

Additional Playback Features

Changing to another title/chapter/

track ............................................................ 44

Pausing playback and step play ............ 44

Searching forward/backward ................ 44

Zooming in ................................................ 44

Using TITLE options ............................... 45

Selecting various repeat/shufe

functions .........................................................45

Programming disc tracks ............................46

Changing the audio soundtrack

language ..........................................................46

Changing subtitle language ........................47

Switching camera angles .............................47

Time search ...................................................47

DVD System Menu Options

Accessing System Menu - General ..... 48

Screen Saver ..................................................48

Progressive/ Interlace .................................49

Video Output Format .................................49

Restore Factory settings ............................49

Accessing System Menu -Playback ....... 50

TV Aspect Ratio ...........................................50

rating level ......................................................51

Setting or changing the password ...........52

Digital Audio Output ..................................52

Accessing System Menu - Record........ 53

Accessing System Menu - Channel

Setup ........................................................... 53

Accessing System Menu - Clock .......... 53

Date and Time ..............................................53

Specifications ................................54

Troubleshooting .................... 55~56

Glossary ......................................... 57

English

8

Cleaning discs

Some problems occur because the disc

inside the recorder is dirty (frozen

picture, sound disruptions, picture

distortions). To avoid these problems,

discs should be cleaned on a regular

basis.

To clean a disc, use a micro bre cleaning

cloth and wipe the disc from the center

to the edge in a straight line.

CAUTION!

Do not use solvents such as benzene,

thinner, commercially available cleaners,

or anti-static sprays intended for analog

discs. Since the optical unit (laser) of the

DVD recorder operates at a higher

power than regular DVD or CD players,

cleaning CDs intended for DVD or CD

players may damage the optical unit

(laser). Therefore, refrain from using a

cleaning CD.

About recycling

These operating instructions have been

printed on non-polluting paper. This

electronic equipment contains a large

number of materials that can be recycled.

If you are disposing of an old machine,

please take it to a recycling center. Please

observe the local regulations regarding

disposal of packaging materials, exhausted

batteries, and old equipment.

Care and Safety Information

CAUTION!

High voltage! Do not open the

device. You run the risk of getting

an electric shock.

The machine does not contain any

user-serviceable parts. Please leave

all maintenance work to qualied

personnel.

Setup

Finding a suitable location

– Place the set on a at, hard and stable

surface. Do not place the set on a carpet.

– Do not position the set on top of

other equipment that might heat it up

(e.g., receiver or amplier).

– Do not put anything under the set

(e.g., CDs, magazines).

– Install this unit near the AC outlet and

where the AC power plug can be reached

easily.

Space for ventilation

– Place the apparatus in a location with

adequate ventilation to prevent internal

heat build up. Allow at least 10 cm (4”)

clearance from the rear and the top of

the set and 5cm (2”) from the left and

right to prevent overheating.

10cm (4")

5cm (2")

Avoid high temperatures, moisture,

water and dust

– Apparatus shall not be exposed to

dripping or splashing.

– Do not place any sources of danger

on the apparatus (e.g., liquid lled objects,

lighted candles).

English

9

General Information

Introduction

Your Philips DVD recorder allows you to

record the TV programs or duplicate

camcorder recordings to a DVD±RW or

DVD±R/+R DL and play pre-recorded

DVDs.The recordings you make on the

recorder will play on most of the DVD

players and DVD-ROM drives. The

DVD±R/+R DL discs have to be nalized

before they can be played on other DVD

players.

Please take time to read this user manual

before using your DVD recorder. It

contains important information and notes

regarding operation.

Helpful Hints:

– If you have questions or if problems come

up during operation, please see the chapter

‘Troubleshooting’.

– If you need further assistance, please call

the customer support service for your

country. The corresponding telephone

numbers and e-mail addresses are given in

the guarantee booklet.

– Refer to the type plate on the rear or

bottom of the product for identication and

supply ratings.

Accessories supplied

– Remote control and batteries

– Audio/Video (AV) cables

– RF coaxial cable

– Quick Start Guide

– User Manual

Region codes

DVD lms are usually not released at the

same time in all regions of the world,

thus all DVD players are keyed to a

specic region code.

The regional code is shown at the back

panel of this device. If the DVD is

marked with a different region code, it

cannot be played on this device.

Copyright notice

The making of unauthorised copies of

copy-protected material, including

computer programmes, les, broadcasts

and sound recordings, may be

infringement of copyrights and constitute

a criminal offence. This equipment

should not be used for such purposes.

Region

China, Calcos Islands,

Walls and Futuna

Islands

ALL

6

DVD that can

be played

English

10

Step 1: Connecting the

antenna cables

These connections enable you to watch

and record TV programs using the

DVD recorder. If the antenna signal is

connected via a VCR, Cable Box or

Satellite Receiver, ensure that these

devices are turned on in order to watch

or record the cable programs.

l If you want to connect to a VCR

and/or Cable Box/Satellite Receiver,

see page 13~15 for the complete

connection to your TV.

A Connect existing Antenna/Cable TV

signal (or from the Cable Box/Satellite

Receiver {RF OUT or TO TV}) to the

ANTENNA IN jack on the DVD

recorder.

B Use the supplied RF coaxial cable to

connect ANTENNA OUT jack on the

DVD recorder to the antenna input jack

on your TV (VHF/UHF RF IN).

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

Basic Connections - DVD recorder

AUD IO

O U T

S-VID E O

IN

VID E O IN

TV

A N T O U T

R F O U T

A N T IN

R F IN

A

B

VCR/Cable Box/

Satellite Receiver

Antenna/

cable TV signal

English

11

Basic Connections - DVD recorder (continued)

Step 2: Connecting the

video cable

This connection enables you to view the

disc playback from the DVD recorder.

You only need to choose one of the

options below to make your video

connection.

Option 1: Using Video(CVBS) jack

(good picture quality)

l Use the supplied audio/video cables (yellow

plug) to connect VIDEO (CVBS)-OUT

jack on the DVD recorder to the video

input jack (or labeled as A/V In, Video In or

Composite) on the TV.

Option 2: Using S-Video jack

(excellent picture quality)

l Use an S-video cable (not supplied) to

connect S-VIDEO jack on the

DVD recorder to the S-Video input

jack (or labeled as Y/C or S-VHS) on

the TV.

Option 3 : Using Component Video

jack (best picture quality)

AUse the component video cables (red/

blue/green - not supplied) to connect the

Y Pb Pr -OUT jacks on the DVD

recorder to the corresponding

component video input jacks (or labeled

as Y Pb/Cb Pr/Cr or YUV(Y/Pb/Pr)) on

the TV.

B If your TV accepts Progressive Scan signal,

see page 49 for detailed Progressive Scan

set up.

IMPORTANT!

The progressive scan video quality is

only available through Y Pb Pr

connection and a progressive TV is

required. It is strongly advised to

complete the DVD recorder

installation rst, before enabling the

progressive scan feature.

AUD IO

O U T

S-VID EO

IN

VID EO IN

TV

Option 2

Option 3

Option 1

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

English

12

Basic Connections - DVD recorder (continued)

AUD IO

OU T

S-VID E O

IN

VID E O IN

TV

DIGITAL IN

AV amplier/

receiver

Step 3: Connecting the

audio cables

This connection enables you to listen to

the sound.

Option 1: Using an Audio cable

You can connect the DVD recorder to a

two channel stereo system or receiver in

order to enjoy the stereo sound system.

l Use the supplied audio cable (red/white

ends) to connect AUDIO L/R OUT

jacks to one of the following devices with

the same input jacks.

– a stereo system (for example, TV or

mini system).

– a receiver with two channel analog

stereo.

Option 2: Using a Coaxial cable

You can connect the DVD recorder to

an AV amplier/receiver in order to

enjoy multichannel surround sound.

l Use a coaxial cable (not supplied) to

connect the COAXIAL socket on the

DVD recorder to the digital input on the

AV amplier/ receiver with a digital multi-

channel sound decoder.

Before you start operating, set the Digital

Audio Output accordingly (see page 55).

If the Digital Output setting does not

match your stereo’s capabilities, the

stereo may produce a strong, distorted

sound or no sound at all.

Helpful Hint:

– Do not connect your TV’s audio output

jacks to the AUDIO L/R (IN-EXT) jacks on

this DVD recorder as this may cause

unwanted noise.

Option 1

Option 2

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

English

13

Optional Connections

A

C

Antenna/

cable TV signals

Connecting to a Cable Box or

Satellite Receiver

Option 1

If your Cable Box/Satellite Receiver

has only an antenna output jack

(RF OUT or TO TV),

refer to “Connecting the antenna cables”

on page 10 for the complete connection

to your TV.

Option 2

If your Cable Box/Satellite Receiver

has video/audio output jacks,

A Keep the existing antenna connection

from the Cable Box/Satellite Receiver to

your TV.

B Use the audio/video cables to connect

the VIDEO/AUDIO IN-EXT on the

DVD recorder to the matching VIDEO/

AUDIO output jacks on the Cable Box/

Satellite Receiver.

C Use the audio/video cables to connect

the VIDEO/AUDIO OUT on the DVD

recorder to the matching VIDEO/AUDIO

input jacks on the TV.

Back of a Cable Box or

Satellite Receiver

(Example only)

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

RF

S-VIDEO

OUT

IN

AUDIO

R L

VIDEO

AUD IO

OU T

S-VID E O

IN

VID E O IN

TV

B

English

14

Optional Connections (continued)

VIDEO

IN

晻

AUDIO

L

AUDIO

R

VIDEO

OUT

AUDIO

L

AUDIO

R

VHF/UHF

RF IN

VHF/UHF

RF OUT

AUD IO

OU T

S-VID E O

IN

VID E O IN

TV

A

B

C

Back of a VCR

(Example only)

D

Connecting to a VCR or

other similar device

This connection enables you to record

from video tape to a DVD±R/±RW and

allows the VCR to be used for playback if

the DVD recorder is turned off.

A Connect the Antenna/Cable TV signal to

the antenna input (RF IN) jack on the

VCR, then connect the antenna

output(RF out) jack on the VCR to the

ANTENNA IN jack on the DVD

recorder.

B Use the supplied RF coaxial cable to

connect the ANTENNA OUT jack on

the DVD recorder to the antenna input

jack on the TV.

C Use the audio/video cables to connect

the VIDEO/AUDIO IN-EXT on the

DVD recorder to the matching VIDEO/

AUDIO output jacks on the VCR.

D Use the audio/video cables to connect

the VIDEO/AUDIO OUT on the DVD

recorder to the matching VIDEO/AUDIO

input jacks on the TV.

Helpful Hints:

– You may use the S-VIDEO (Y/C) jack

instead of VIDEO (CVBS) jack if the

connected device has the same S-VIDEO

input/output jack. This video connection

provides better picture quality.

– Most commercial video cassettes and

DVDs are copy-protected and therefore

cannot be recorded.

– Connect the DVD recorder directly to the

TV. If there is a VCR or an additional device

in between, the picture quality may be poor

because of the copy protection system built

into the DVD recorder.

Antenna/

cable TV signals

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

English

15

Optional Connections (continued)

VIDEO

IN

晻

AUDIO

L

AUDIO

R

VIDEO

OUT

AUDIO

L

AUDIO

R

VHF/UHF

RF IN

VHF/UHF

RF OUT

RF

S-VIDEO

OUT

IN

AUDIO

R L

VIDEO

AUD IO

OU T

S-VIDE O

IN

VIDE O IN

TV

A

Antenna/cable

TV signals

Back of a Cable Box or

Satellite Receiver

(Example only)

Back of a VCR

(Example only)

Connecting to a VCR and

Cable Box/Satellite Receiver

A Connect the Antenna/Cable TV signal to

the antenna input (RF IN) jack on the

VCR.

B Connect the antenna output (RF OUT)

jack on the VCR to the input(RF in) jack

on the Cable Box/Satellite Receiver.Then

connect the RF out on the Cable Box/

Satellite receiver to the ANTENNA IN

jack on the DVD recorder.

C Use the supplied RF coaxial cable to

connect the ANTENNA OUT jack on

the DVD recorder to the antenna input

jack on the TV .

D Use the audio/video cables to connect

the VIDEO/AUDIO IN-EXT on the

DVD recorder to the matching VIDEO/

AUDIO output jacks on the VCR.

E Use the audio/video cables to connect the

VIDEO/AUDIO OUT on the DVD

recorder to the matching VIDEO/AUDIO

input jacks on the TV.

Helpful Hints:

– You may use the S-VIDEO (Y/C) jack

instead of VIDEO (CVBS) jack if the

connected device has the same S-VIDEO

input/output jack. This video connection

provides better picture quality.

B

C

E

D

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

English

16

Optional Connections (continued)

• • •• • •

OR

Connecting a camcorder to

the front jacks

You can use the front jacks to copy

camcorder recordings. These jacks are

located behind the ap on the right hand

side; it provides convenient connections

for a camcorder.

Option 1: Using DV IN jack

Use this connection if you have a Digital

Video or Digital 8 camcorder. The DV

jack conforms to the i.LINK standard.

It provides the best picture quality.

l Use an i.LINK 4-pin cable (not supplied)

to connect DV IN jack on the DVD

recorder to the appropriate DV OUT

jack on the camcorder.

Before you start operating, press REC

SOURCE on the remote control

repeatedly to select ‘DV’ as the input

channel. For recording, see pages 26~28.

Helpful Hints:

– The DV IN jack does not support a

connection to a Personal Computer.

– It is not possible to record from the DVD

recorder to your camcorder via the DV IN

jack on your DVD recorder.

Option 2: Using S-VIDEO In or

VIDEO In jack

Use S-VIDEO connection if you have a

Hi8 or S-VHS(C) camcorder. It provides

better picture quality.

Alternatively, you can use VIDEO

connection if your camcorder has only a

single video output (Composite Video,

CVBS).

A Connect the S-VIDEO or VIDEO jack

at the front panel of the DVD recorder

to the corresponding S-VHS or Video

output jack on the camcorder.

B Use an audio cable (red/white ends) to

connect the AUDIO L/R jacks at the

front panel of the DVD recorder to the

audio output jacks on the camcorder.

Before you start operating, press REC

SOURCE on the remote control

repeatedly to select ‘Front S-VIDEO’ or

‘Front CVBS’ as the input channel,

depending on your connections.

For recording, see pages 26~28.

A

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

B

English

17

Jacks behind the ap

Flip down the door as indicated by the

OPEN  label at the right hand corner.

i S-VIDEO

– S-video input for SVHS/Hi8 camcorders

or SVHS/Hi8 video recorders.

Press REC SOURCE on the remote

control to select ‘Front S-Video’ in order

to view the input source.

j VIDEO

– Video input for camcorders or video

recorders.

Press REC SOURCE on the remote

control to select ‘Front CVBS’ in order

to view the input source.

k L/R AUDIO

– Audio input for camcorders or video

recorders.

l DV IN

– Input for digital camcorders or other

suitable devices using this connector.

Press REC SOURCE on the remote

control to select ‘DV’ in order to view

the input source.

a STANDBY-ON 2

– Turns on or off the DVD recorder.

b Disc tray

c OPEN CLOSE ç

– Opens/closes the disc tray.

d n STOP

– Stop playback/recording.

e

É

PLAY

– Play a disc.

f

– Skips to previous or next Chapter/Track.

g RECORD l

– Start recording the current TV channel

or the current video input source.

– Press repeatedly to set up a One Touch

Recording at 30 minutes interval.

h System display panel

– Show information about the current

status of the DVD recorder.

Main Unit

English

18

a STANDBY-ON 2

– Turns on the DVD recorder or to

standby mode.

b TIMER

– Enters/exits the timer recording menu.

c SYSTEM-SETUP

– Enters/exits the system menu.

d   : Cursor buttons for moving to the

left or right.

 : Cursor buttons for moving up/

down.

e REC

l



– Starts recording the current TV channel

or the current video input source.

f

– Skips to previous or next Chapter/Track.

g TOP MENU (For DVD±R/±RW and

DVD+R DL only)

– Enters the disc editing menu.

h AUDIO

– Selects an audio language (DVD, VCD) or

an audio channel.

i SUBTITLE

– Selects a DVD subtitle language.

j REC MODE

– Toggles between recording modes :

1, 2, 2.5, 3, 4 and 6 hours mode.

This determines the quality of the

recording and the amount/length of time

you can record on a DVD±R/±RW/+R

DL.

Remote Control

English

19

k NUMERIC KEYPAD

– Selects a chapter/track number to play.

– Selects the recorder’s preset TV tuner

channel.

l REC SOURCE

– Selects the recorder’s input source.

m DISC-MENU

– Access DVD disc menu or Index Picture

screen of a DVD±R/±RW/+R DL.

– Switch PBC on or off.

n OK

– Stores/conrms an entry.

– Conrms a selection.

o PLAY

É

– Plays a disc.

p STOP

n

– Stops playback/recording.

q

Å

– Pauses the playback or recording.

– Press repeatedly to advance a paused

picture one frame at a time.

r EDIT (For DVD±R/±RW/+R DL only)

– Enters/exits the video editing menu.

s ZOOM

– Enlarges a picture on the TV screen.

t TITLE MENU

– Enters/exits the TITLE menu.

u ADD/CLEAR

– Selects/Removes a track/chapter/le in

the program menu.

– Clears a timer entry.

Remote Control (continued)

English

20

v OPEN

– Open/close the disc tray.

w DISPLAY

– Show and adjust the playback status.

x GO TO

– Go to desired title/chapter/time and play.

y REW

– Fast reverse, there are four modes: 2X,

4X, 16X, 32X.

z F.FWD

– Fast forward, there are four modes: 2X,

4X, 16X, 32X.

27 SLOW

– Slow forward, there are four modes: 1/2,

1/4, 1/8,1/16.

28 ANGLE

– Change camera angle (must be supported

by the disc).

29 REPEAT

– Set repeat functions.

30 REPEAT AB

– Repeat specied program segment.

31 P.SCAN

– Switch the scanning mode of video

output (Progressive/Interlace).

32 CH+/-

– Select TV channel or external signal

source.

33 SHUFFLE

– Play program in random sequence.

34 VOL+/-

– Adjust the audio output volume.

Remote Control (continued)

22

24

25

28

29

31

33

26

23

30

32

27

34

ページが読み込まれています...

Philips DVDR3408 ユーザーマニュアル

このマニュアルも適しています

Philips DVDR3408 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント