Sony KDL-40V5500 ユーザーマニュアル

KDL-52V5500

KDL-40V5500

KDL-37S5500

KDL-32S5500

KDL-26S5500

KDL-22S5700

LCD Digital Colour TV

Operating Instructions

GB

CT

操作手冊

2

GB

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this

manual thoroughly and retain it for future

reference.

~

• The illustrations in this manual are of the

KDL-40V5500 unless otherwise stated.

Trademark information

HDMI, the HDMI logo and High-

Definition Multimedia Interface are

trademarks or registered trademarks of

HDMI Licensing LLC.

DLNA and DLNA CERTIFIED are

trademarks and/or service marks of Digital

Living Network Alliance.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

“BRAVIA” and are

trademarks of Sony Corporation.

“XMB” and “xross media bar” are

trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

The typefaces used on the screen display

are solely developed by DynaComware.

This television is designed for

use in Hong Kong and ensured

the usage in Hong Kong only.

3

GB

Table of Contents

Start-up Guide 4

Safety Information ............................................................................................................................8

Precautions .......................................................................................................................................9

Remote and TV Controls/Indicators..............................................................................................10

Watching TV

Watching TV ....................................................................................................................................15

Using the Digital Electronic Programme Guide (EPG) (for digital channels only) ..................17

Using the Favourite List ................................................................................................................18

Using Optional Equipment

Connecting Optional Equipment ..................................................................................................19

Viewing Pictures from Connected Equipment .............................................................................22

Playing back Photo/Music/Video via USB ....................................................................................23

Using BRAVIA Sync with Control for HDMI..................................................................................25

Using Home Network Features

Connecting to the Network ............................................................................................................26

Enjoying Photo/Music/Video Files via the Network.....................................................................26

Checking the Network Connection................................................................................................27

Adjusting the Server Display Settings..........................................................................................28

Using Menu Functions

Navigating through TV Home Menu on XMB™ ............................................................................29

TV Settings Menu............................................................................................................................30

Additional Information

Installing the Accessories (Wall-Mount Bracket).........................................................................41

Specifications..................................................................................................................................45

Troubleshooting..............................................................................................................................47

Before operating the TV, please read “Safety Information” (page 8). Retain this manual for future reference.

GB

4

GB

Start-up Guide

Before Use

To check the accessories

Mains lead/AC power cord (1) (KDL-52V5500/

40V5500 only)

Cable holder (1) (KDL-52V5500/40V5500 only)

Stand (1) and screws (4) (KDL-40V5500/37S5500/

32S5500/26S5500 only)

Carrying handle (1) and screws (4) (KDL-22S5700

only)

RM-GD007 Remote (1) (KDL-52V5500/40V5500/

37S5500/32S5500/26S5500 only)

RM-GD007W Remote (1) (KDL-22S5700 only)

Size AA batteries (R6 type) (2)

To insert batteries into the remote

1: Attaching the stand (for

KDL-40V5500/37S5500/

32S5500/26S5500)

1 Open the carton box and take out the stand

and the screws.

2 Place the TV set on the stand. Take care

not to interfere with cables.

3 Fix the TV to the stand according to the

arrow marks that guide the screw holes

using the supplied screws.

~

• If using an electric screwdriver, set the tightening

torque at approximately 1.5 N·m (15 kgf·cm).

Push and lift the cover to open.

5

GB

Start-up Guide

Attaching the carrying handle (for KDL-

22S5700)

1 Place the TV with its screen facing down

on a stable cloth-covered work surface.

2 Place the carrying handle onto the TV as

shown.

Fit the protrusion on the rear of the

carrying handle into the guidance holes on

the rear of the TV.

3 Attach the carrying handle to the TV

securely using the supplied screws.

~

• When transporting the TV set, hold the carrying

handle as shown A.

• If not using the carrying handle to transport the

TV set, hold it as shown B.

2: Connecting an aerial/

antenna/cable/VCR

Connecting an aerial/antenna/cable

Connecting an aerial/antenna/cable and

VCR

The rear side of the

carrying handle

Protrusion

Guidance

hole

Soft cloth

Screw (+PSW 4 ×

12) for the carrying

handle

AB

Aerial/Antenna cable

(not supplied)

Aerial/Antenna cable

(not supplied)

Aerial/

Antenna

cable

(not

supplied)

AV cable

(not

supplied)

VCR

S-Video

cable

(not

supplied)

Aerial/

Antenna

cable (not

supplied)

6

GB

3: Preventing the TV from

toppling over

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.

2 Install a machine screw (M4 × 20, not

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord (not supplied).

z

• An optional Sony support belt kit is used to secure

the TV. Contact your nearest Sony service centre

to purchase a kit. Have your TV model name

ready for reference.

4: Bundling the cables

~

• Do not bundle the mains lead/AC power cord

together with other cables.

• The illustration may differ from that of the actual

rear panel, and the mains lead/AC power cord may

already be connected, depending on the screen

size.

KDL-52V5500/

40V5500

7

GB

Start-up Guide

5: Performing the initial

set-up

~

• You can also tune channels manually (page 39).

Adjusting the viewing angle

of the TV (for KDL-52V5500/

40V5500)

This TV can be adjusted within the angles

shown below.

Adjust the angle left and right (swivel)

Detaching the Table-Top

Stand from the TV

~

• Remove the screws guided by the arrow marks

of the TV.

• Do not remove the Table-Top Stand for any reason

other than listed below.

– To wall-mount the TV.

– To put the TV in the carton at time of purchase

(except for KDL-52V5500/22S5700).

• If you have attached the carrying handle, you need

to remove the carrying handle to wall-mount the

TV (KDL-22S5700 only).

3

Follow the instructions on the screen.

Programme Sorting: If you want to

change the order of analogue channels,

follow the steps in “Programme Sorting”

(page 37).

Eco Preset: When you select “Yes,” the

“Eco” settings are changed into

recommended values to reduce power

consumption.

Top view

Front

KDL-52V5500/40V5500/37S5500/32S5500/

26S5500

KDL-22S5700

Soft cloth

Screw (+PSW 4 × 12) for

the carrying handle

Screw (+PSW 4 ×

16) for the Table-

Top Stand

8

GB

Safety

Information

Installation/Set-up

Install and use the TV set in accordance

with the instructions below in order to

avoid any risk of fire, electrical shock or

damage and/or injuries.

Installation

• The TV set should be installed near an

easily accessible AC power outlet.

• Place the TV set on a stable, level surface

to avoid it from falling down and cause

personal injury or damage to the TV.

• Only qualified service personnel should

carry out wall installations.

• For safety reasons, it is strongly

recommended that you use Sony

accessories, including:

KDL-52V5500/40V5500/37S5500/

32S5500:

– Wall-mount bracket SU-WL500/

WL50B

KDL-26S5500/22S5700:

– Wall-mount bracket SU-WL100

• Be sure to use the screws supplied with

the Wall-mount bracket when attaching

the mounting hooks to the TV set. The

supplied screws are designed so that they

are 8 mm to 12 mm in length when

measured from the attaching surface of

the mounting hook.

The diameter and length of the screws

differ depending on the Wall-mount

bracket model.

Use of screws other than those supplied

may result in internal damage to the TV

set or cause it to fall, etc.

Transporting

• Before

transporting the

TV set, disconnect

all cables.

• Two or three

people are needed

to transport a large

TV set.

• When transporting

the TV set by hand,

hold it as shown on

the right. Do not

put stress on the

LCD panel and the

frame around the

screen.

• When lifting or

moving the TV set,

hold it firmly from

the bottom.

• When transporting

the TV set, do not

subject it to jolts or

excessive

vibration.

• When transporting the TV set for repairs

or when moving, pack it using the

original carton and packing material.

Ventilation

• Never cover the ventilation holes or

insert anything in the cabinet.

• Leave space around the TV set as shown

below.

• It is strongly recommended that you use

a Sony wall-mount bracket in order to

provide adequate air-circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent

the collection of dirt or dust:

– Do not lay the TV set flat, install

upside down, backwards, or

sideways.

– Do not place the TV set on a shelf,

rug, bed or in a closet.

– Do not cover the TV set with a

cloth, such as curtains, or items

such as newspapers, etc.

– Do not install the TV set as shown

below.

AC power cord

Handle the AC power cord and outlet as

follows in order to avoid any risk of fire,

electrical shock or damage and/or injuries:

– Use only Sony supplied AC power

cords, not those of other brands.

– Insert the plug fully into the AC power

outlet.

– Operate the TV set on a 220–240 V AC

supply only.

– When wiring cables, be sure to unplug

the AC power cord for your safety and

take care not to catch your feet on the

cables.

– Disconnect the AC power cord from

the AC power outlet before working on

or moving the TV set.

– Keep the AC power cord away from

heat sources.

– Unplug the AC power plug and clean it

regularly. If the plug is covered with

dust and it picks up moisture, its

insulation may deteriorate, which

could result in a fire.

Notes

• Do not use the supplied AC power cord

on any other equipment.

• Do not pinch, bend, or twist the AC

power cord excessively. The core

conductors may be exposed or broken.

• Do not modify the AC power cord.

• Do not put anything heavy on the AC

power cord.

• Do not pull on the AC power cord itself

when disconnecting the AC power cord.

• Do not connect too many appliances to

the same AC power outlet.

• Do not use a poor fitting AC power

outlet.

Prohibited Usage

Do not install/use the TV set in locations,

environments or situations such as those

listed below, or the TV set may

malfunction and cause a fire, electrical

shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the

seashore, on a ship or other vessel, inside a

vehicle, in medical institutions, unstable

locations, near water, rain, moisture or

smoke.

Mounting Hook

Hook attachment on rear

of TV set

Screw (supplied with the

Wall-mount bracket)

8 mm - 12 mm

KDL-26S5500/

22S5700

KDL-37S5500/

32S5500

KDL-52V5500/

40V5500

KDL-52V5500/40V5500

KDL-37S5500/32S5500

30 cm

10 cm 10 cm

10 cm

Leave at least this space around

the set.

30 cm

10 cm

6 cm

Leave at least this space around

the set.

10 cm

Air circulation is blocked.

Wall Wall

9

GB

Environment:

Places that are hot, humid, or excessively

dusty; where insects may enter; where it

might be exposed to mechanical vibration,

near flammable objects (candles, etc). The

TV set shall not be exposed to dripping or

splashing and no objects filled with

liquids, such as vases, shall be placed on

the TV.

Situation:

Do not use when your hands are wet, with

the cabinet removed, or with attachments

not recommended by the manufacturer.

Disconnect the TV set from AC power

outlet and antenna during lightning storms.

Broken pieces:

• Do not throw anything at the TV set. The

screen glass may break by the impact and

cause serious injury.

• If the surface of the TV set cracks, do not

touch it until you have unplugged the AC

power cord. Otherwise electric shock

may result.

When not in use

• If you will not be using the TV set for

several days, the TV set should be

disconnected from the AC power for

environmental and safety reasons.

• As the TV set is not disconnected from

the AC power when the TV set is just

turned off, pull the plug from the AC

power outlet to disconnect the TV set

completely.

• However, some TV sets may have

features that require the TV set to be left

in standby to work correctly.

For children

• Do not allow children to climb on the TV

set.

• Keep small accessories out of the reach

of children, so that they are not

mistakenly swallowed.

If the following problems

occur...

Turn off the TV set and unplug the AC

power cord immediately if any of the

following problems occur.

Ask your dealer or Sony service centre to

have it checked by qualified service

personnel.

When:

– AC power cord is damaged.

– Poor fitting of AC power outlet.

– TV set is damaged by being dropped,

hit or having something thrown at it.

– Any liquid or solid object falls through

openings in the cabinet.

Precautions

Viewing the TV

• View the TV in moderate light, as

viewing the TV in poor light or during

long period of time, strains your eyes.

• When using headphones, adjust the

volume so as to avoid excessive levels,

as hearing damage may result.

LCD Screen

• Although the LCD screen is made with

high-precision technology and 99.99%

or more of the pixels are effective, black

dots may appear or bright points of light

(red, blue, or green) may appear

constantly on the LCD screen. This is a

structural property of the LCD screen

and is not a malfunction.

• Do not push or scratch the front filter, or

place objects on top of this TV set. The

image may be uneven or the LCD screen

may be damaged.

• If this TV set is used in a cold place, a

smear may occur in the picture or the

picture may become dark. This does not

indicate a failure. These phenomena

disappear as the temperature rises.

• Ghosting may occur when still pictures

are displayed continuously. It may

disappear after a few moments.

• The screen and cabinet get warm when

this TV set is in use. This is not a

malfunction.

• The LCD screen contains a small amount

of liquid crystal. Mercury is sometimes

contained depending on the kind of

fluorescent tubes. Follow your local

ordinances and regulations for disposal.

Handling and cleaning the

screen surface/cabinet of

the TV set

Be sure to unplug the AC power cord

connected to the TV set from AC power

outlet before cleaning.

To avoid material degradation or screen

coating degradation, observe the following

precautions.

• To remove dust from the screen surface/

cabinet, wipe gently with a soft cloth. If

dust is persistent, wipe with a soft cloth

slightly moistened with a diluted mild

detergent solution.

• Never use any type of abrasive pad,

alkaline/acid cleaner, scouring powder,

or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using

such materials or maintaining prolonged

contact with rubber or vinyl materials

may result in damage to the screen

surface and cabinet material.

• Periodic vacuuming of the ventilation

openings is recommended to ensure to

proper ventilation.

• When adjusting the angle of the TV set,

move it slowly so as to prevent the TV

set from moving or slipping off from its

table stand.

Optional Equipment

Keep optional components or any

equipment emitting electromagnetic

radiation away from the TV set. Otherwise

picture distortion and/or noisy sound may

occur.

Batteries

• Observe the correct polarity when

inserting batteries.

• Do not use different types of batteries

together or mix old and new batteries.

• Dispose of batteries in an

environmentally friendly way. Certain

regions may regulate the disposal of

batteries. Please consult your local

authority.

• Handle the remote with care. Do not

drop or step on it, or spill liquid of any

kind onto it.

• Do not place the remote in a location

near a heat source, a place subject to

direct sunlight, or a damp room.

10

GB

Remote and TV Controls/Indicators

Remote and TV controls

Buttons on the TV will work the same as those on the remote.

* In the TV menu, these buttons will work as F/f/G/g/.

z

•The number 5, N, PROG + and AUDIO buttons on the remote have

a tactile dot. Use the tactile dots as a reference when operating the

TV.

Button Description

1 "/1 (TV

standby)

Press to turn the TV on and off from standby

mode.

2 1 (Power) Press to turn the TV on or off.

~

• To disconnect the TV, turn off the TV, then

unplug the mains lead/AC power cord from

the mains/AC power.

3

— Twin

Picture/PIP

Displays two pictures simultaneously

(page 22).

11

GB

4 F/f/G/g/ Press F/f/G/g to move the on-screen cursor.

Press to select/confirm the highlighted item.

When playing a photo file: Press F/G to select

the previous file. Press f/g to select the next

file.

When playing a music/video file: Press to

pause/start the playback. Press and hold G/g to

fast forward/fast reverse, then release the

button at the point where you want to resume

playback. Press F to start playback from the

beginning of the current file. Press f to go to

the next file.

5 HOME Press to display the TV Home Menu (page 29).

6 RETURN Press to return to the previous screen of the

displayed menu.

When playing a photo/music/video file: Press

to stop the playback. (The display returns to the

file or folder list.)

7 PROG +/–/

/

In TV mode: Press to select the next (+) or

previous (–) channel.

In Text mode: Press to select the next ( ) or

previous ( ) page.

8 2 +/–

(Volume)

Press to adjust the volume.

9 % (Mute) Press to mute the sound. Press again to restore

the sound.

z

• In standby mode, if you want to turn on the

TV without sound, press this button.

0 / (Input

select/Text

hold)

In TV mode: Press to display a list of inputs.

In Text mode: Press to hold the current page.

qa OPTIONS Press to display a list that contains “Device

Control” or shortcuts to some setting menus.

Use the “Device Control” menu to operate

equipment that is compatible with control for

HDMI.

The listed options vary depending on the input

source.

qs / (Text) Press to display text information (page 15).

qd / (Info/

Text reveal)

Each time you press the button, the display

changes as follows:

In digital mode: Details of the current

programme

t Details of the next programme

In analogue mode: Current channel number

and Wide Mode

t Clock information

In Text mode (page 15): Reveals hidden

information (e.g. answers to a quiz).

(Continued)

12

GB

qf GUIDE /

(EPG)

Press to display the Digital Electronic

Programme Guide (EPG) (page 17).

qg

(Favourite)

Press to display the Favourite List that you

have specified (page 18).

qh Coloured

buttons

When the coloured buttons are available, an

operation guide appears on the screen.

qj Number

buttons

In TV mode: Press to select channels. For

channel numbers 10 and above, press the next

digit quickly.

In Text mode: Press to enter a page number.

qk (Wide

Mode)

Press to change the Wide Mode (page 16).

ql (Subtitle

setting)

Press to change the subtitle language (page 39)

(in digital mode only).

w; SCENE Press to display the “Scene Select” menu.

When you select the desired scene option, the

optimum sound quality and picture quality for

the selected scene are automatically set.

Press F/f/G/g to select the scene option, then

press .

Cinema: Delivers picture scenes just like

those in a theatre-like atmosphere with

dynamic sound.

Photo: Delivers picture scenes that

authentically reproduce the texture and colour

of a printed photo.

Sports: Delivers picture scenes that let you

experience realistic picture and sound like

those in a stadium.

Music: Delivers sound effects that let you

experience dynamic and clear sound like that at

a concert.

Game: Delivers picture scenes that let you

enjoy your game-playing experience to the

fullest with superb picture and sound quality.

Graphics: Delivers picture scenes that ease

your prolonged monitor viewing experience

and reduce fatigue by displaying clearer

detailed pictures.

General: Use this setting when you do not

optimise the sound quality and picture quality

for any scene.

Auto: The optimum sound quality and picture

quality are automatically set according to the

input source, though there may not be any

effect depending on the connected devices.

~

• When you set Theatre Mode (page 13) to on,

the “Scene Select” setting switches to

“Cinema” automatically.

13

GB

wa AUDIO In analogue mode: Press to change the dual

sound mode (page 33).

In digital mode: Press to change the

language to be used for the programme

currently being viewed (page 39).

ws BRAVIA

Sync

m/N/X/M/x: You can operate the

BRAVIA Sync-compatible equipment that is

connected to the TV.

SYNC MENU: Displays the menu of

connected HDMI equipment. While viewing

other input screens or TV programmes,

“HDMI Device Selection” is displayed when

the button is pressed.

THEATRE: You can set Theatre Mode to on or

off. When Theatre Mode is set to on, the

optimum sound quality (if the TV is connected

with an audio system using an HDMI cable)

and picture quality for film-based contents are

automatically set.

~

• If you turn the TV off, Theatre Mode is also

turned off.

• When you change the “Scene Select” setting,

Theatre Mode turns off automatically.

• “Control for HDMI” (BRAVIA Sync) is only

available with the connected Sony equipment

that has the BRAVIA Sync or BRAVIA

Theatre Sync logo or is compatible with

control for HDMI.

wd DIGITAL/

ANALOG

Switches between digital and analogue modes.

(Continued)

14

GB

The illustrations may differ from that of the actual TV front panel depending on the screen size.

Operation Guide

Example: Press or RETURN (see 4 on page 11 or 6 on page 11).

The operation guide provides help on how to operate the TV using the remote, and is displayed at

the bottom of the screen. Use the remote buttons shown on the operation guide.

Indicators

Indicator Description

1 Light sensor

(page 30)

Do not put anything over the sensor, doing so may affect its function.

2 Remote control

sensor

Receives signals from the remote.

Do not put anything over the sensor. The sensor may not work properly.

3 (Picture Off /

Timer)

Lights up in green when you select “Picture Off” (page 30).

Lights up in orange when you set the timer (page 17, 30).

4 1 (Standby) Lights up in red when the TV is in standby mode.

5 " (Power) Lights up in green when the TV is on.

6 Illuminated clock

(for KDL-22S5700)

The time set by “Clock Set” (page 30) is displayed. The clock is not displayed

when the TV is turned off.

About the operation guide on the TV screen

15

GB

Watching TV

1 Press 1 on the TV to turn on the TV.

When the TV is in standby mode (the 1

(standby) indicator on the TV front panel

is red), press "/1 on the remote to turn on

the TV.

2 Press DIGITAL/ANALOG to switch

between digital and analogue modes.

The available channels vary depending on

the mode.

3 Press the number buttons or PROG +/– to

select a TV channel.

To select a digital programme using the

Digital Electronic Programme Guide

(EPG), see page 17.

In digital mode, an information banner

appears briefly. Each time you press

, the banner changes cyclically as

follows:

Current programme information t Next

programme information t No banner

The following icons may be indicated on

the banner.

: Radio service

: Scrambled/Subscription service

: Subtitles available

: Subtitles available for the hearing

impaired

: Multiple audio languages available

c:Reminder

: Recommended minimum age for

current programme (ages from 4 to

18)

: Parental Lock

To access Text

Press /. Each time you press /, the display

changes cyclically as follows:

Text and TV picture t Text t No Text (exit

the Text service)

To select a page, press the number buttons or

/.

To hold a page, press .

To reveal hidden information, press .

z

• You can also jump directly to a page by selecting

the page number displayed on the screen. Press

and F/f/G/g to select the page number, then press

.

• When four coloured items appear at the bottom of

the Text page, you can access pages quickly and

easily (Fastext). Press the corresponding coloured

button to access the page.

2

3

(Continued)

16

GB

To change the Wide Mode manually

Press repeatedly to select the desired Wide

Mode.

* Parts of the top and bottom of the picture may be cut off.

You can adjust the vertical position of the picture. Press

F/f to move the picture up or down (e.g. to read

subtitles).

~

• When you select “Wide Zoom,” some characters

and/or letters at the top and the bottom of the

picture may not be visible. In such a case, adjust

“Vertical Size” in the “Screen” menu (page 34).

z

• When “Auto Wide” (page 33) is set to “On,” the

TV will automatically select the best mode to suit

the input from an external equipment.

• If 720p, 1080i or 1080p source pictures are

displayed with black borders on the screen edges,

select “Wide Zoom” or “Zoom” to adjust the

pictures.

Wide Zoom*

Enlarges the centre

portion of the picture.

The left and right edges

of the picture are

stretched to fill the 16:9

screen.

Normal

Displays the 4:3 picture

in its original size. Side

bars are shown to fill

the 16:9 screen.

Full

Stretches the 4:3

picture horizontally, to

fill the 16:9 screen.

Zoom*

Displays the

cinemascopic (letter

box format) picture in

the correct proportion.

17

GB

Watching TV

Using the Digital Electronic Programme Guide (EPG)

(for digital channels only)

1 In digital mode, press GUIDE.

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

Digital Electronic Programme Guide (EPG)

To Do this

View a programme Press F/f/G/g to select a programme, then press .

Turn off the EPG Press GUIDE.

Sort programme information by

category

– Category list

1 Press the blue button.

2 Press F/f to select a category, then press .

Set a programme to be displayed

automatically on the screen when it

starts

– Reminder

1 Press F/f/G/g to select a future programme you want to display,

then press .

2 Press F/f to select “Reminder,” then press .

A c symbol appears next to the programme’s information. The

indicator on the TV front panel lights up in orange.

~

• If you switch the TV to standby mode, the TV will automatically

turn on when the programme starts.

Cancel a reminder

– Timer list

1 Press .

2 Press F/f to select “Timer list,” then press .

3 Press F/f to select the programme you want to cancel, then

press .

4 Press to select “Cancel Timer.”

A display appears to confirm that you want to cancel the

programme.

5 Press G/g to select “Yes,” then press .

18

GB

Using the Favourite List

Analogue Favourites

The Favourite feature lets you select

programmes from a list of up to 16 favourite

channels that you specify.

1 In analogue mode, press .

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

Digital Favourites

You can specify up to four of your favourite

channel lists.

1 In digital mode, press .

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

A

nalogue Favourite List

To Do this

Watch a channel Press .

Turn off the Favourite list Press .

Add a current channel to the

Favourite list

Press F/f to select “Add to Favourites,” then press .

Remove a channel from the Favourite

list

1 Press F/f to select “Edit Favourites,” then press .

The “Favourite Set-up” screen appears.

2 Press F/f to select the channel number, then press .

3 Press F/f to select “– – –,” then press .

Digital Favourite List

To Do this

Turn off the Favourite list Press RETURN.

Add or remove channels in a

Favourite list

1 Press the blue button.

Go to step 2 when you add channels for the first time or the

Favourite list is empty.

2 Press the yellow button to select the Favourite list to edit.

3 Press F/f/G/g to select the channel to add or remove, then press

.

Watch a channel

1 Press the yellow button to select a Favourite list.

2 Press F/f to select a channel, then press .

Remove all channels from a Favourite

list

1 Press the blue button.

2 Press the yellow button to select the Favourite list to edit.

3 Press the blue button.

4 Press G/g to select “Yes,” then press .

19

GB

Using Optional Equipment

Connecting Optional Equipment

You can connect a wide range of optional equipment to your TV

(The connector panel illustrations are of the KDL-40V5500).

Digital still camera

Camcorder

USB storage media

Camcorder

Headphones

DVD player

Blu-ray disc

player

Audio system

PC

(HDMI-output)

PC

Hi-Fi audio equipment

Home theatre system

with digital input

Video

game

equipment

DVD player

DVD player with

component output

VCR

Broadband router

Camcorder

KDL-52V5500/

40V5500 only

(Continued)

20

GB

Connecting audio-video equipment (quality order, high to low)

Connect to Connect with Description

4 HDMI IN 1, 2, 3,

or 4 (for KDL-

52V5500/40V5500)

HDMI IN 1 or 2 (for

KDL-37S5500/

32S5500/26S5500/

22S5700)

HDMI cable Digital video and audio signals are input from the connected

equipment.

In addition, when you connect the equipment that is

compatible with control for HDMI, communication with the

connected equipment is supported. See page 36 to set up this

communication.

If the equipment has a DVI socket/jack, connect the DVI

socket/jack to the HDMI IN 1 socket/jack through a DVI -

HDMI adaptor interface (not supplied), and connect the

equipment’s audio out socket/jack to the PC/HDMI 1 AUDIO

IN socket/jack in the PC IN sockets/jacks. (The PC/HDMI 1

AUDIO IN socket/jack is used as the audio in socket/jack for

both the PC IN and HDMI IN 1 sockets/jacks.)

~

• Be sure to use only an authorised HDMI cable bearing the

HDMI logo. We recommend that you use a Sony HDMI

cable (high speed type).

• When connecting an audio system that is compatible with

control for HDMI, be sure to also connect it to the

DIGITAL AUDIO OUT (OPTICAL) socket/jack.

3 / 1 or 2 Component video

cable, audio cable

When using the component video jack 1 as the video jack

3, select “Video 3” in the “Video 3/Component 1 Input”

menu (page 36).

~

• You cannot use the component video jack 1 and the

video jack 3 at the same time.

2 9 1, 1

or 2, and 1

or 2

S-video cable or

composite video

cable, audio cable

To avoid picture noise, do not connect the camcorder to the

video jack 1 and the S video jack 1 at the same time.

If you connect a mono equipment, connect to the L (MONO)

jack 1 or 2.

When using the video jack 1 and audio jack 1 as

output jacks, select “Output” in the “Video 1 Input/Output”

menu (page 36).

Connecting audio/portable equipment

Connect to Connect with Description

5 DIGITAL

AUDIO OUT

(OPTICAL)

Optical audio

cable

You can listen to TV sound on the connected Home theatre

system with digital input.

1 Audio cable You can listen to TV sound on the connected Hi-Fi audio

equipment.

8 USB USB cable You can enjoy photo/music/video files stored in a Sony

digital still camera or camcorder (page 23).

ページが読み込まれています...

Sony KDL-40V5500 ユーザーマニュアル

このマニュアルも適しています

Sony KDL-40V5500 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント