Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices 取扱説明書

ブランド: Bose

モデル: SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices

カテゴリー: 補助楽器

タイプ: 取扱説明書

| | |

Owner’s Guide |

COMPANION

MULTIMEDIA SPEAKER SYSTEM

Framingham, MA 01701-9168 USA

AM328138 Rev.01

owners.bose.com/companion5

Companion 5_Cover_APAC.fm Page 1 Friday, December 14, 2012 3:35 PM

Welcome, new owner.

A site just for you.

Thank you for choosing the Companion

multimedia speaker system from Bose.

We encourage you to visit us online at

owners.bose.com/companion5.

This website

allows you to access helpful information about

your new Companion 5 system.

Visit the site to:

• Find

setup tips and view FAQs.

• Learn more about your product.

• Register your Companion 5 system.

• Discover other

Bose

products.

Just log on for a simple way to get the

most from your new Companion

system.

owners.bose.com/companion5

00.Comp5+MacOG.book Page 2 Tuesday, December 18, 2012 11:40 AM

English FrançaisEspañol

SAFETY INFORMATION

Please read this guide

Please take the time to follow the instructions in this guide carefully. It will help you set up and operate your speaker

system properly. Please save this guide for future reference.

WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.

WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases,

shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids into any part of the

system. Liquids can cause a failure and/or a fire hazard.

The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of

uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to

constitute a risk of electrical shock.

The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user

to the presence of important operating and maintenance instructions in this owner’s guide.

WARNING: To prevent electric shock, match the wide blade of the line cord plug to the wide slot of the AC (mains)

receptacle. Insert fully.

WARNING: No naked flame sources, such as lighted candles, should be placed on or near the apparatus.

CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety,

regulatory compliance, and system performance.

CAUTION: Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when

using headphones, especially for extended periods.

This product conforms to all EU Directive requirements as applicable by law. The complete Declaration of

Conformity can be found at www.Bose.com/compliance.

Notes:

• Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain

readily operable.

• This product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on

boats.

Bose, COMPANION, TrueSpace and Acoustimass are registered trademarks of Bose Corporation. All other trademarks referenced herein are

property of their respective owner’s.

00.Comp5+MacOG.book Page 3 Tuesday, December 18, 2012 11:40 AM

EnglishFrançais Español

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions – for all components before

using this product.

2. Keep these instructions – for future refer

ence.

3. Heed all warnings – on the product and

in the owner’s

guide.

4. Follow all instructions.

5. Do not use this apparatus near water or moisture –D

not use this product

near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, near a swimming pool, or

anywhere else that water or moisture are present.

6. Clean only with a dry cloth – and as directed by

Bose

Corporation. Unplug this product from the wall outlet before

cleaning.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’

s instructions –To

ensure reliable operation of the product and to protect it

from overheating, put the product in a position and location

that will not interfere with its proper ventilation. For example,

do not place the product on a bed, sofa, or similar surface

that may block the ventilation openings. Do not put it in a

built-in system, such as a bookcase or a cabinet that may

keep air from flowing through its ventilation openings.

8. Do not install near any heat sources, such as radia-

tors, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug

has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The

wider blade or third prong are provided for your

safety. If the provided plug does not fit in your outlet,

consult an electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked on or

pinched, particularly at plugs, convenience

receptacles,

and the point where they exit

from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with

the cart, stand, tripod,

bracket or table specified by the manu-

facturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of

time – to prevent

damage to this product.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way: such as

power-supply cord or

plug is damaged; liquid has been spilled or objects

have fallen into the apparatus; the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped – Do not attempt to ser-

vice this product yourself. Opening or removing covers may

expose you to dangerous voltages or other hazards. For help

in solving problems, contact Bose Customer Service. Refer

to the address sheet included with the system.

15. To prevent risk of fire or electric shock, avoid over-

loading wall outlets, extension cords, or integral

convenience receptacles.

16. Do not let objects or liquids enter the product –as

they may touch dangerous voltage points or short-out parts

that could result in a fire or electric shock.

17. See product enclosure for safety related-markings.

18. Use proper power sources –

Plug the product into

proper power source, as described in the operating instruc-

tions or as marked on the product.

Information about products that generate

electrical noise

If applicable, this equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However, this

is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, you are

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

eceiver.

• Connect the equipment

to an outlet on a different circuit

than the one to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

This product complies with

the Canadian ICES-003 Class B

specifications.

00.Comp5+MacOG.book Page 4 Tuesday, December 18, 2012 11:40 AM

CONTENTS

English FrançaisEspañol

INTRODUCTION .................................................. 6

Your Companion

5 multimedia speaker system ................................ 6

Setup help ............................................................. 6

SYSTEM SETUP .................................................. 7

Unpacking ............................................................. 7

For your records ......................................................... 7

Placing your Companion

5 system .......................................... 8

Positioning the speakers ............................................... 8

Positioning the Acoustimass

module ..................................... 9

Making system connections ............................................... 10

Windows

XP audio setup ................................................. 11

Windows

Vista audio setup ............................................... 13

Mac OS

X audio setup ................................................... 15

OPERATION ..................................................... 16

System modes .......................................................... 16

Controlling the volume .................................................... 16

Adjusting the bass ....................................................... 17

CONNECTING OTHER DEVICES ....................................... 18

Connecting headphones .................................................. 18

Connecting an audio device ............................................... 18

CARE AND MAINTENANCE .......................................... 19

Cleaning your speaker system .............................................. 19

Limited warranty ........................................................ 19

Troubleshooting ......................................................... 19

Customer service ........................................................ 20

Product specifications .................................................... 20

Computer system recommendation ......................................... 20

INTRODUCTION

SYSTEM SETUP

OPERATION

CONNECTING OTHER DEVICES

CARE AND MAINTENANCE

00.Comp5+MacOG.book Page 5 Tuesday, December 18, 2012 11:40 AM

INTRODUCTION

EnglishFrançais Español

INTRODUCTION

Your Companion

5 multimedia speaker system

Thank you for purchasing a Bose

Companion

5 multimedia speaker system, which delivers

the superb acoustic performance needed to enjoy the full audio impact of music, movies,

games, and other entertainment sources from your computer.

Using TrueSpace

digital surround signal processing technology, the small satellite speakers

provide improved spaciousness, bold surround effects, and movie-like realism.

Your system includes:

• Two small, easy-to-place speakers on stands and an Acoustimass

module.

• A USB cable to connect the system to your computer.

• A control pod that allows you to control system volume and connect headphones or porta-

ble audio players.

Setup help

The setup instructions in this owner’s guide explain how your Companion 5 multimedia

speaker system easily connects to your computer.

If you need additional help, please visit http://owners.bose.com/Companion5 for more

information.

00.Comp5+MacOG.book Page 6 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

English FrançaisEspañol

SYSTEM SETUP

Unpacking

Carefully unpack your system. Save all packing materials, which provide the safest way to

transport your system.

If any part of the system appears damaged, do not attempt to use it. Notify Bose or your

authorized Bose

dealer immediately. For Bose contact information, refer to the address

sheet included in the carton.

Check to be sure your system includes the parts shown in Figure 1.

Figure 1

Carton contents

Acoustimass

module

Left speaker

Right speaker

Control pod

USB cable

*The appropriate power cord for your region is included.

Power cord*

Rubber feet for

Acoustimass module

WARNING: To avoid danger of suffocation, keep plastic bags out of the reach of children.

For your records

Now is a good time to record the serial number of your new Companion

5 system

here and on your product registration card. The serial number is located on the rear

of the Acoustimass module.

Serial number: ____________________________________

Purchase date: ____________________________________

We suggest you keep your sales receipt and a copy of your product registration

card together with this owner’s guide.

00.Comp5+MacOG.book Page 7 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

EnglishFrançais Español

Placing your Companion

5 system

For optimal performance, use the following guidelines to choose locations and positions for

the Acoustimass

module, speakers, and the control pod. Refer to Figure 2, which shows a

typical system setup.

Figure 2

Typical system setup

24 in (61 cm)

maximum

Acoustimass module

Left (L) speaker

Right (R) speaker

Control pod

Positioning the speakers

Proper positioning of the speakers will allow you to experience the audio surround effects

that your Companion

5 multimedia speaker system is designed to deliver.

• Place the left and right speaker to the left and right of your computer monitor at about an

arm’s length away from where you are seated (Figure 2). The bead on each speaker cord is

marked L (left) or R (right) to identify left/right placement.

• For optimum performance, position each speaker the same distance from you, and no

more than 24 inches (61 cm) apart.

• Aim both speakers straight ahead. Do not angle them inward or outward.

• Keep the speakers away from adjacent large objects or cabinet surfaces. For example, if

your computer desk includes a hutch, keep the outside edge of each speaker at least six

inches away from any adjacent surface. Avoid placing the speakers inside cubby holes.

00.Comp5+MacOG.book Page 8 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

English FrançaisEspañol

Positioning the Acoustimass

module

The Acoustimass

module is designed to be the unseen part of the speaker system.

For example, you can place it under your computer table or desk.

• Put one rubber foot on each corner of the

bottom panel of the module.

• Stand the module on its feet on a flat surface.

• DO NOT BLOCK the front grille of

the module.

• DO NOT lay the module on its side or stand it

upside down.

• DO NOT put any objects or equipment behind

it or beside it that may block the ventilation

openings at the rear of the module. Adequate

ventilation is necessary to prevent the module

from overheating.

• Place the module at least 6 inches (15 cm)

away from the computer and computer monitor

to prevent the module from interfering with your

computer system.

• Keep the module away from heat sources such as radiators, baseboards, or quartz

heaters.

• Make sure the power cord can reach an AC (mains) outlet and the USB cable can reach

the USB connection on your computer.

CAUTION: Do not place computer monitors, floppy disks, hard drives, or other magnetic media

within 6 inches (15 cm) of the Acoustimass module. The magnetic field produced by this module

can erase magnetic media and interfere with the monitor.

00.Comp5+MacOG.book Page 9 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

EnglishFrançais Español

Making system connections

The following steps and Figure 3 tell you how to make the system connections.

Before you start:

• Please read the entire setup procedure.

• Make sure your computer is on and the operating system is running.

• IMPORTANT: Close all other software applications.

1. Insert the red plug on the right (R) speaker cable into the R jack and insert the white plug

on the left (L) speaker cable into the L jack. The R and L marks on the plugs must face up

for each plug to fit correctly into its respective jack.

2. Plug the control pod cable into the Control Pod jack.

3. Plug one end of the power cord into the AC Input jack on the rear panel of the

Acoustimass

module. Plug the other end into an AC (mains) outlet.

Some Companion 5 systems include a small AC power switch on the back of the

Acoustimass module, just above the AC Input jack. When your Companion 5 system

is connected to an AC power outlet, you can use that switch to turn off power to your

system to conserve electricity.

4. Plug the appropriate end of the USB cable (supplied) into the To Computer jack on the

Acoustimass module. Plug the other end into a USB jack on your computer.

IMPORTANT: For optimum performance, connect the USB cable directly to a

USB jack on your computer rather than connecting through a USB hub.

5. For Windows

XP computers, go to “Windows

XP audio setup” on page 7.

For Windows

Vista computers, go to “Windows

Vista audio setup” on page 7.

For Mac OS

X computers, go to “Mac OS

X audio setup” on page 7.

Right

(

)

speaker

Left (L) speaker

Control

pod

Computer USB

Acoustimass module rear panel

Note: Make sure all cable plugs are fully inserted into their respective jacks.

Figure 3

Connection overview

Note: The system turns on in Inactive mode when you plug in the power cord. See “System

modes” on page 16.

Note: Bose recommends using a safety agency-approved surge protector on all electronic

equipment. Voltage variations and spikes can damage electronic components in any system.

A quality suppressor can eliminate the vast majority of failures attributed to surges and may be

purchased at electronics stores.

00.Comp5+MacOG.book Page 10 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

English FrançaisEspañol

Windows

XP audio setup

IMPORTANT!

Do not unplug any cables during this setup procedure.

For additional help with your audio setup, please visit

http://owners.bose.com/Companion5.

1. After plugging in the USB cable, wait for a series of “Found New Hardware” messages

to appear on your computer screen (Figure 4) (this takes about 30 seconds). If any other

messages appear that interrupt this setup process, refer to “Troubleshooting” on

page 19.

Start

End

Note: If you do not see these messages, the capability to display them may be disabled in your

computer. Wait two minutes before proceeding to the next step.

Figure 4

“Found New Hardware”

typical message sequence

00.Comp5+MacOG.book Page 11 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

EnglishFrançais Español

2. In the Windows XP Control Panel, open Sounds and Audio Devices

Properties (Figure 5).

Figure 5

Sounds and Audio Devices

Properties and Advanced

Audio Properties

Connected USB device

Setting for the Companion 5 system

3. Under the Volume tab, verify that Bose USB Audio is the connected USB device.

4. Under Speaker settings, click the Advanced button to open Advanced Audio

Properties.

5. In the Speaker setup drop list, select 5.1 surround sound speakers.

6. Click Apply and then OK.

Your Companion

5 multimedia speaker system is now ready to use.

Note: If you remove the USB connection to your Companion 5 system and plug it in again later,

perform this procedure again to check the settings.

00.Comp5+MacOG.book Page 12 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

English FrançaisEspañol

Windows

Vista audio setup

IMPORTANT!

• Do not unplug any cables during this setup procedure.

• For additional help with your audio setup, please visit

http://owners.bose.com/Companion5.

1. Plug in the USB cable. Wait for the device driver installation message to appear on your

computer screen (Figur

e 6).

Figure 6

Device driver installation

message

• If any other messages appear that interrupt this setup process, refer to “Troubleshoot-

ing” on page 19.

• If you do not see this messages, the capability to display it may be disabled in your

computer. Wait two minutes before proceeding to the next step.

2. Click in the bubble to display the installa9tion status (Figure 7). Wait for the installation to

finish.

Figure 7

Device driver installation

status

3. Open the control panel and click Hardware and Sound (Figure 8).

Figure 8

Control panel

00.Comp5+MacOG.book Page 13 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

EnglishFrançais Español

4. Click Sound in the Hardware and Sound control panel (Figure 9).

Figure 9

Sounds

5. Verify that the Playback default setting (indicated by a green check) is Bose USB Audio.

If not Select Bose USB Audio and click Set Default.

Figure 10

Sound control panel

Your Companion

5 multimedia speaker system is now ready to use.

00.Comp5+MacOG.book Page 14 Tuesday, December 18, 2012 11:40 AM

SYSTEM SETUP

English FrançaisEspañol

Mac OS

X audio setup

IMPORTANT!

Do not unplug any cables during this setup procedure.

For additional help with your audio setup, please visit

http://owners.bose.com/Companion5.

1. In the System Preferences, open the Sound control panel (Figure 11).

2. Choose Bose USB Audio for sound output and

close the control panel.

Figure 11

Mac OS

X sound

preferences

3. In the Applications folder on your hard drive, open the Utilities folder.

4. Open the Audio MIDI Setup control panel (Figure 12).

5. Select Bose USB Audio for Properties For, Default Output, and System Output.

Figure 12

Audio MIDI Setup control

panel

Your Companion

5 multimedia speaker system is now ready to use.

00.Comp5+MacOG.book Page 15 Tuesday, December 18, 2012 11:40 AM

OPERATION

06.Operation.fm 12/12

English

Français Español

OPERATION

System modes

There are three system modes. Each system mode is identified by the color of the mode indi-

cator on the control pod (Figure 13):

• Muted (Amber): The system speakers are silenced. You hear no audio from the computer

or any connected source. This mode is automatically selected when you connect head-

phones to the control pod.

• Active (Green): You hear the active sound source from the system speakers. The position

of the volume control ring sets the volume level.

• Inactive (Red): When both the USB connection from your computer and the input

signal of a connected audio source are inactive for several minutes, the system mutes

the speakers and switches to a reduced power mode. The system returns to the Muted

mode when the USB connection becomes

active again.

Touch the top center of the control pod to switch between the Muted and Active mode,

except when headphones are connected.

Plugging in headphones always puts the system

in Muted Mode until they are removed.

Figure 13

System controls and mode

indicator

Mode switch

(touch-sensitive)

Mode indicator

• Amber = Muted mode

• Green = Active mode

• Red = Inactive mode

Volume control ring

IMPORTANT!

• The Companion

5 multimedia speaker system is designed to perform at its best

without any additional audio effects. Make sure you disable any audio effects

settings and close any effects applications running on your computer.

• Make sure the settings in your software application are correct for 5.1 surround

sound.

Controlling the volume

The volume control ring on the control pod (Figure 13) is the master volume control for any

audio coming from your computer or a device connected to the input jack. Rotate the ring

clockwise to increase the volume or counterclockwise to decrease it.

To set the volume level

To properly set the volume level, you need to adjust both the volume level of the source (your

PC or a connected source) and the Companion 5 system:

1. Set the Companion 5 system volume to minimum.

2. Set the source volume near maximum.

3. Start playing music.

4. Slowly increase the volume on the Companion 5 system control pod until the sound

reaches a comfortable level.

To mute the system

To silence the system, touch the mode switch on the control pod (indicator glows Amber).

Touch it again to unmute (indicator glows Green).

Note: The system output may be reduced by an internal protection feature if you play music at

full volume for a long period of time.

00.Comp5+MacOG.book Page 16 Tuesday, December 18, 2012 11:40 AM

OPERATION

06.Operation.fm 12/12

OPERATION

English FrançaisEspañol

Adjusting the bass

After listening to your speaker system, you may wish to adjust the sound. Use the bass

compensation control (Figure 14) on the Acoustimass

module.

Figure 14

Bass compensation control

Acoustimass rear

panel

Bass compensation:

•

 to increase bass (+)

•

 to decrease bass (–)

00.Comp5+MacOG.book Page 17 Tuesday, December 18, 2012 11:40 AM

CONNECTING OTHER DEVICES

English

Français Español

CONNECTING OTHER DEVICES

Connecting headphones

To connect headphones, plug the headphones cord into the 3.5-mm stereo headphones

jack on the side of the control pod (Figure 15).

• Plugging in headphones automatically mutes the system speakers.

• After disconnecting headphones, touch the mode switch to hear sound from the speakers

again.

• To adjust the volume level, use the volume control ring on the control pod.

Figure 15

Control pod connectors

Headphones output jack Audio input jack

Mode switch

Connecting an audio device

To connect an audio device such as a CD/MP3 player, plug the audio cable from the

device into the 3.5-mm stereo input jack on the control pod.

To adjust the volume level, turn up the volume on the audio device and use the volume

control ring on the control pod.

Note: When listening to a connected audio device, alerts and sounds from your computer are

mixed with the sound from the audio device. You may need to adjust the volume control ring and

the volume levels in your computer and the connected device to hear both sources at your

preferred levels.

00.Comp5+MacOG.book Page 18 Tuesday, December 18, 2012 11:40 AM

CARE AND MAINTENANCE

English FrançaisEspañol

Cleaning your speaker system

• To clean the surface of your speakers, Acoustimass

module, and control pod, use a soft

cloth. You may use an ammonia-free window cleaner to maintain the finish.

• Do not use any sprays near the speakers. Do not use any solvents, chemicals, or cleaning

solutions containing alcohol, ammonia, or abrasives.

• Do not allow liquids to spill into any openings.

• To clean the speaker grilles, vacuum them carefully.

Limited warranty

The Companion

5 system is covered by a limited transferable warranty. Details of the limited

warranty are provided on the product registration card that came with your system. Please fill

out the information section on the card and mail it to Bose or register your product at

http://owners.bose.com/register. Failure to do so will not affect your limited warranty rights.

Troubleshooting

This table provides guidelines for solving problems that you may encounter. For additional

help, contact Bose directly or visit the Internet site at http://owners.bose.com/Companion5.

See the address sheet included in the carton for contact information.

Problem What to do

Setup was interrupted by

the message, “A prob-

lem occurred during

hardware installation.

Your new hardware might

not work properly.”

• You may have removed the USB cable during the hardware installation process. Insert the

USB cable and start again.

• Try a different USB jack.

Setup was interrupted by

the message, “This USB

device can perform faster

if you connect it to a

Hi-Speed USB 2.0 port.

For a list of available

ports, click here.”

• You may have plugged into a USB hub that has a USB 1.0 device connected to it.

Remove the USB 1.0 device, or plug the Companion 5 system directly into a USB

2.0 port.

No sound from the

system.

• Disconnect the USB cable from your computer and plug it in again.

• Make sure connections are secure (See “Making system connections” on page 10).

• For Accoustimass modules with an AC power switch, make sure the switch is in the on

position.

• Check your speaker cords for damage that may be causing an open or short circuit.

• Turn the volume ring on the control pod clockwise.

• If you are using a connected audio device, make sure it is plugged in and the volume

control on the device is turned up.

• Make sure the speaker system is in the Active mode (control pod indicator is Green).

• Disconnect headphones.

• Restart your digital audio application. Make sure mute is not set in the application and

that the volume is set at a reasonable level.

The entire speaker sys-

tem sounds distorted.

• Decrease the volume at the sound source and increase the volume on the control pod.

• Disable the effects in any audio application running.

CARE AND MAINTENANCE

00.Comp5+MacOG.book Page 19 Tuesday, December 18, 2012 11:40 AM

CARE AND MAINTENANCE

EnglishFrançais Español

Customer service

For additional help in solving problems, contact Bose

Customer Service. Refer to the

address sheet included with the system.

Product specifications

Power rating USA/Canada..................120VAC~ 50/60 Hz 300W

International...................220VAC-240VAC~ 50/60 Hz 300W

Japan.............................100VAC~ 50/60 Hz 300W

Dimensions Satellite speaker ............8.85"H x 5.79"W x 3.83"D

(22.5 cm x 14.7 cm x 9.7 cm)

Acoustimass module ..... 8.58"H x 6.82"W x 16.74"D

(21.8 cm x 17.3 cm x 42.5 cm)

Control pod....................2.46"DIA x 1.12"H

(6.3 cm x 2.9 cm)

Weight Satellite speaker ............1.9 lb (0.85 kg)

Acoustimass module .....18.3 lb (8.3 kg)

Control pod.................... 0.46 lb (0.21 kg)

Finish Acoustimass module .....Scratch-resistant, satin-finished vinyl

Satellite speakers .......... Painted polymer finish

Minimum computer system recommendation

• 1 GHz, minimum, Pentium processor or equivalent

• 256 MB RAM, minimum

• USB 2.0

• Microsoft Windows

XP service pack 3, Windows Vista service pack 2, Windows 7,

Mac OS

X 10.4.6

• A compatible 5.1 surroundsound decoder residing on your computer

I’m hearing clicks, pops,

and abnormal sounds on

my computer.

• This may be caused by connecting the speaker system to your computer through a USB

hub. Disconnect the Companion

5 system USB cable from the hub and plug it into a

USB jack on your computer.

Sound from speakers is

not loud enough.

• Increase the volume on your computer or other sound source.

System sounds “tinny,”

too much treble.

• Make sure right (R) and left (L) speakers are on the correct sides of your computer moni-

tor. Check the L and R markings on the speaker cord behind each speaker.

• Make sure Bass Compensation control on the Acoustimass

module is not turned fully

counterclockwise.

One satellite speaker

does not play or sounds

distorted.

• Check all connections between the satellite speakers, control pod, sound source and the

Acoustimass module. Make sure all plugs are fully inserted into the jacks on the module.

• Make sure the speaker cord plug on the speaker in question is fully inserted into its jack

on the Acoustimass module.

• To determine if the problem is in the sound source or the Acoustimass module, connect a

different sound source to the control pod. If the Companion 5 speaker system operates

properly, the problem is in the original sound source. If the problem remains, then the

problem is in the Acoustimass module.

• Check balance levels on your sound source.

Problem What to do

CARE AND MAINTENANCE

00.Comp5+MacOG.book Page 20 Tuesday, December 18, 2012 11:40 AM

ページが読み込まれています...

Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices 取扱説明書

ブランド: Bose

モデル: SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices

カテゴリー: 補助楽器

タイプ: 取扱説明書

PDFをダウンロードします

報告

他の言語で

English: Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices Owner's manual

Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices 取扱説明書

Bose SoundTrue® Ultra in-ear headphones – Samsung and Android™ devices 取扱説明書

他の言語で

関連論文

その他のドキュメント