K1

robosen K1 ユーザーガイド

  • Robosen Interstellar Scout のユーザーマニュアルに関するご質問にお答えします。このマニュアルには、ロボットの機能、操作方法、トラブルシューティング情報などが記載されています。音声制御やプログラミング機能など、様々な機能についてご質問ください。
  • ロボットが誤作動した場合はどうすれば良いですか?
    音声コマンドが反応しないのはなぜですか?
    ロボットが歩いたり、他の動作をしているときにバランスを崩すのはなぜですか?
    ロボットの電源が入らないのはなぜですか?
    アプリがロボットに接続できないのはなぜですか?
Robosen Robotics Inc.
Address : 15025 Proctor Ave# 113, City of Industry. CA 91748
Website : www.robosen.com
Support: supportusa@robosen.us
PRODUCT SPECIFICATION
Robot Diagram
Eye-Light
Power Button
START YOUR MAGICAL JOURNEY
Microphone
USB Port
Charging Port
PRODUCT SPECIFICATION
QUICK START GUIDE
PACKING LIST
Robot X1
User Manual X1
Power Adapter X1
Data Cable X1
POWER ON
Take out the robot carefully from the box and place it on a flat surface;
Press and hold the power button until the device says “Hello, Humanity.”
INSTALL MOBILE APP
Search For “K One” in the App Store (for Apple devices) or Google Play
(for Android devices), then download and install the application.
Dimensions
176×99×349mm
Weight
0.94kg
Material
Aluminum Alloy Frame, ABS + PC shell
Servo motor
17 (Chest 1/Hands 3×2/Legs 5×2)
Wireless Connection
Bluetooth Low Energy (BLE) 4.2
Control Method
Mobile App, Voice Control
External Ports
DC Charging Port, USB Type-C Port
Battery Capacity
2000mAh Lithium Battery Pack
Adapter
Input 100V-240V~50/60Hz 0.6A, Output DC 12V 2A
QUICK START GUIDE
QUICK START GUIDE
CONTROL VIA APP
Ensure your mobile device’s Bluetooth is On.
Turn on the robot.
Open the device app, then tap the Connection Icon located on the top right-hand
corner of the Main Page.
An icon with your robot’s unique serial number will appear. Example: “xxx-0000”. Tap on
“xxx-0000” icon.
Have fun controlling the robot via the app.
CONTROL VIA VOICE
Turn on the robot.
Say “Hey, K One” to enter Voice Control mode. The robot will respond, “I’m here.”
See the Voice Command Card for more preset voice commands;
(NOTE: Voice control functions cannot be used while the robot is connected with the device app.
Disconnect robot from the device app to use voice control.)
CHARGING
POWER OFF
Connect one end of power supply adapter to the robot. Connect the other end of the power
Press and hold the power button until the robot says, “See you next time, Humanity”.
If connected via the App, tap the connection icon located on the top-right corner of the
Main Page. Tap the“Shutdown K1” icon.
adapter to a power outlet. The robot will say “Start to supply energy” and will start charging;
The indicator light of the power adapter changes from red to green when the robot is fully
charged.
FEATURES & FUNCTIONS
FEATURES & FUNCTIONS
STANDING UP AUTOMATICALLY
Sensors and an internal gyroscope detects the robot’s position and will automatically
rotate the robot into an upright position if tilted.
The automatic standing feature can be enabled or disabled on the top-right corner of the
Bluetooth Control page.
VOICE CONTROL
Check Voice Command Card via the app.
Use voice programming to make the robot perform a series of motions.
Control the robot through the app on the smart device.
ACTION STUNTS
The robot can perform thousands of possible actions.
ROBOT PROGRAMMING
Beginner Programming Mode Manual:
Basic programming mode that anyone can easily get started with. The device’s movements
can be edited by hand, recorded and combined into a series of actions.
Intermediate Programming Mode - Visual:
Block-based visual programming is one of the most popular programming modes in the world.
User can create and modify the robot’s actions via the graphical user interface to create a
multitude of customized actions.
Advanced Programming Mode 3D:
Robosen researched and developed a new type of programming model, which can easily adjust each
joint of the robot in real-time.
Voice Programming Mode:
Intelligent voice programming is an innovative programming mode allowing the robot to execute
desired movements by inputting the user’s simple voice commands.
SPECIAL FUNCTION INSTRUCTION
SPECIAL FUNCTION INSTRUCTION
VOICE PROGRAMMING (NOT BLUETOOTH CONNECTED)
Say “Hey K One” to device. Wait for the device to respond“I’m here”, say “Start programming”
within 10 seconds, then enter Voice Programming Mode after the robot responds with
“Programming Mode has been started.”
In the Voice Programming Mode, say a voice command phrase to the robot, such as “move forward” or
“come back.” After saying the voice command, wait for the success prompt sound effect to indicate that the
command phrase has been input successfully, and then continue to say the next command phrase to be executed.
Say “cancel” to the robot if you need to exit Voice Programming Mode.
After inputting a set of voice command words, you can say “executing” to initiate these commands, and the device will execute,
in sequence, the motions you have programmed.
Note:
The device will automatically withdraw exit Voice Programming Mode if no commands are heard after 30 seconds.
Voice command inputs have failed if you don’t hear the “success” sound effect after each command entry.
order word, otherwise, input failed;
If voice commands aren’t being recognized, please log into the app and review the section on setting voice commands.
VISUAL VOICE PROGRAMMING (BLUETOOTH CONNECTED)
Open the device app and ensure that the robot has successfully connected with the app through Bluetooth on your
mobile device, and then enter Programming Mode - Voice Programming;
Press and hold the“Microphone” icon in the voice programming interface to enter the Voice-Input
Interface;
Then, in the Voice-Input Interface, sayStart programming” to the mobile device. After the system success-
fully
recognizes
the“Start
programming”
command,
you
can
release
it.
At
this
time,
the
“Start
program- ming”
command block you just entered is displayed on the screen, which means that you can start constructing
the action sequence block program you want next;
Press
and
hold
the“Microphone”
icon
again
to
enter
the
Voice-Input
Interface,
say
a
voice
command
word to
the
mobile
device,
such
asmove
forward”,
“come
back”
or
“turn
left”,
etc.
Release
your
hand
to
complete the input. If the voice command word you just entered appears on the screen, it means that the
input is successful;
If the input is not successful, please try again;
You can input multiple action blocks according to the above method to form an interesting action program;
Finally, input“executing” in the Voice-Input Interface to let the robot execute the programmed action
program;
In addition, you can say "Hey, K One" to the mobile device in the Voice-Input Interface, and the robot will
answer "I’m here" after inputting the command.
SPECIAL FUNCTION INSTRUCTION
TROUBLESHOOTING
SHARE MOTIONS or CUSTOMIZED ACTIONS?
Enter into app-programming mode, and select one programming method for programming.
After the manual break programming or graphic programming is finished, you can then click the
“Shooting” button on the programming interface and enter into the robot’s shooting function. You can also
click “Play” button during the shooting process to make the robot carry out your just finished
programming commands.
Enjoy sharing your programming accomplishments with Robosen Community at www.XXX.XXX (?).
TUTORIAL VIDEO
Log in to our ocial website (www.robosen.com) or use your phone app to check out our Tutorial
videos.
Q: WHY IS THE ROBOT IS MALFUNCTIONING
Turn off and restart the robot
Ensure the robot is fully charged
Check the website for video tutorials on troubleshooting issues
Contact customer service for additional help.
Q: WHY IS THE ROBOT UNRESPONSIVE WHEN I USE VOICE COMMAND
Check the Bluetooth connection
Ensure the robot is disconnected from the app
Use the preset Voice Commands to control your robot .
Ensure you are in a quiet setting with minimal background noise.
Q: WHY CAN’T K1 KEEP ITS BALANCE WHEN IT IS WALKING OR DOING OTHER ACTIONS
Ensure the robot is on a smooth flat surface. K1 will not function properly on an uneven or
bumpy surface.
TROUBLESHOOTING
WARNINGS
Q: THE ROBOT DOES NOT POWER ON
Ensure the Robot is fully charged. Charge the Robot fully and power on
Press and hold the power button until the T9 says“Hello Humanity.”
Q: APP CANNOT CONNECT TO THE ROBOT
Ensure the robot is fully charged and turned on
Ensure Bluetooth is enabled on your smart phone/tablet
Ensure your device permissions are enabled for the robot on your device
Ensure only one device is connected to the robot. Disconnect the robot from any other smart
phone/tablet you are not using.
Q: THE ROBOT STILL SHOWS LOW BATTERY AFTER CHARGING FOR ALONG TIME
Ensure both ends of the charging cable are properly plugged in.
DISCLAIMER
Product and Limited Warranty Information Guide
This guide contains safety, handling, disposal, recycling, and regulatory information as well as the limited warranty for the
machine. read all safety information and operating instructions before using the machine to avoid harm or injury. visit
www.robosen.com for a downloadable version.
IMPORTANT SAFETY AND HANDLING INFORMATION
Read the following warning before you or your child play with the machine. Failing to do so may cause injury.
CAUTION:
a)
To reduce the risk of damage or injury, do not attempt to remove the machine's shell;
b)
Please refer all non-routine servicing questions to Robosen Robotics Inc.
c)
No user-serviceable parts are contained inside.
CALIFORNIA PROPOSITION 65 WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
General:
Read all safety and operating instructions before operating machine.
Retain the safety and operating instructions for future reference.
Follow all operating and use instructions.
Do not attempt to service machine yourself.
Refer all non-routine servicing to Robosen.
Seizure, Blackouts and Eyestrain
A small percentage of people may be susceptible to blackouts or seizures (even if they have never had one before) when exposed
to flashing lights or light patterns such as when playing games or watching video. If you have experienced seizures or blackouts
or have a family history of such occurrences, you should consult a physician before playing video games or watching videos.
Discontinue use of machine and your smart device controller and consult a physician if you experience headaches, blackouts,
seizures, convulsion, eye or muscle twitching, loss of awareness, involuntary movement, or disorientation. To reduce risk of
headaches, blackouts, seizures, and eyestrain, avoid prolonged use, hold your smart device controller some distance from your
eyes, use machine in a well-lit room, and take frequent breaks.
Keeping Machine Within Acceptable Temperatures
Operate and store machine in a place where the temperature is between 0º and 35º C (32º to 95º F). Low or high-temperature
conditions might temporarily shorten battery life or cause machine to temporarily stop working properly. Avoid dramatic
changes in temperature or humidity when using machine, as condensation may form on or within machine. Don't leave machine
in your car, because temperatures in parked cars can exceed this range. When you're using machine or charging the battery, it is
normal for machine to get warm.
Maintenance and Use
Never:
Abuse, throw, drop, puncture, violently kick or step on machine. Forcibly move the product or its parts. This can damage the
robot and compromise its safe operation.
Operate machine on elevated surfaces (shelves, desks) where it can drop or fall. This can damage the robot and compromise
its safe operation.
Operate machine in dangerous, hazardous or public areas where use is not permitted (high voltage power lines, train stations,
airports, trains). Check whether use of machine is permitted before using it in public areas or public transport.
Exceed one hour of continuous use. This can cause premature degradation of the product's lifespan.
Always:
Keep machine in sight at all times when operating it to avoid injuries or damage to people, animals or property.
Ensure that no one is standing nearer than 1 yard (1 meter) from machine when in operation and that you keep a safe distance
between the product and people, animals and property.
Use the machine on smooth and at surfaces.
Periodically examine machine for potential hazards such as cracked, damaged or otherwise broken parts. In the event of such
damage, do not use machine until it can be replaced or repaired.
Battery Warning:
Lithium ion cells and batteries are extremely hazardous and liable to cause serious injuries to persons or property. The user
accepts liability for the use of a Lithium Polymer battery. As the manufacturer and the distributor cannot ensure the battery is
used correctly (charging, discharging, storage, etc.), they cannot be held liable for damages caused to persons or property.
In the event of battery leakage, avoid the liquid coming into contact with skin and eyes. In case of contact with the skin, wash
copiously with soap and water. In case of contact with the eyes, rinse copiously with cold water and consult a doctor. If you
notice a suspicious smell or noise or observe smoke around the charger, disconnect it immediately.
Non-compliance with the instructions below could result in gas being given off, fire, electric shock or an explosion.
Charging:
Examine the charger regularly for damage to the cord, plug, enclosure or other parts. The toy shall only be used with a
transformer for toys. Never use a damaged charger or power adapter or third party charging accessories. Use only the supplied
charging accessories provided. If misused, the charging system can cause electrical shock.
Never charge a leaky battery or one that has been damaged. Do not use the supplied charger/cables to charge any other device.
Do not charge the battery near inammable flammable materials or on an inammable a flammable surface (carpet, wooden
or conducting surface. Do not leave machine unattended during charging.
Never charge the device immediately after use while it is still hot. Let it cool down to room temperature.
Batteries are only to be charged under adult supervision.
Do not cover your product or its charger while the battery is charging. Recharge the battery at a temperature of between 0º and 35º C
(32º to 95º F). The AC/DC adaptor is not a toy and should only be operated by adults.
Use and storage:
Do not use machine if its cover has been broken and the battery's plastic cover has been cracked or compromised in any way.
Do not expose the battery to excessive physical shock.
Do not expose machine and its battery to heat or dispose of a fire.
Do not put the battery in a microwave oven or in a pressurized container.
Do not attempt to dismantle, pierce, distort or cut the battery and do not attempt to repair the battery. Do not place any heavy objects
on machine, the battery or charger.
Do not clean the charger with a solvent, denatured alcohol or other inammable flammable solvents. When cleaning, be sure to unplug t
adapter and charger.
It is essential to avoid short circuits. Avoid direct contact with the electrolyte contained within the battery. The electrolyte
electrolysis vapors are harmful to health.
Do not subject machine and its battery to large temperature variations. Do not place your machine near a source of heat.
Disconnect the charger when you are not charging the battery.
Battery Disposal:
Machine and its batteries put into your general household waste can be harmful to the environment. Damaged or unusable batteries must be
disposed of in a container specially reserved for this purpose. When disposing of the battery, follow appropriate local guidelines and
regulations. For further information contact your local solid waste authority.
Warranty
Limited Warranty to Original Purchaser:
This machine product, as supplied and distributed by Robosen Robotics Inc., and delivered new, in the original carton to the original
customer purchaser, is warranteed by Robosen Robotics Inc. against manufacturing defects in materials and workmanship for a period
of 1 year.
Robosen will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective
during the limited warranty period specified above.
Product Registration:
Register your product at robosen.com.
If a defect arises:
Please contact us at supportusa@robosen.com to be provided with a Return Material Authorization Request (RMA) number.
Provide this number with your package when shipping. We do not accept returns without the RMA number. Purchaser is responsible
for all shipping costs.
Software License:
Use of machine is subject to the machine Software License Agreement.
Exclusions and Limitations:
This warranty covers the normal and intended use of machine. It applies only to the hardware product "machine"manufactured by
Robosen Robotics Inc. The Limited Warranty does not apply to any non-Robosen hardware product or any software, even if packaged
or sold with the machine hardware product. Refer to the software license agreement accompanying the software for details of your
rights with respect to its use. Robosen does not warrant that the operation of machine will be uninterrupted or error-free. Robosen is not
responsible for damage arising from failure to follow instructions relating to machine's use.
This warranty does not apply to:
a)
Consumable parts, such as batteries, or protective coatings designed to diminish over time unless failure has occurred due to a defect
in materials or workmanship;
b)
Damage caused by use with non-machine products;
c)
Damage caused by accidents, misuse, abuse, neglect, misapplication, re, water, lightning or other acts of nature; incorrect electrical
line voltage, fluctuations or surges; damage caused by improper installation; product alteration or modification; improper or
unauthorized repair; exterior finish or cosmetic damage;
d)
Damage caused by operating machine outside the intended uses described by Robosen;
e)
Defects caused by normal wear and tear or otherwise due to the normal aging of the machine product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANT-ABILITY OR FITNESS FOR A PARTICULAR
PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIOD STAT
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON ROBOSEN. EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY
LAW, ROBOSEN IS NOT RESPONSIBLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, LOSS OF
OPPORTUNITY, LOSS OF GOODWILL, LOSS OF REPUTATION, LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA, OR ANY
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, OR
ANY BREACH OF ANY WARRANTY OR CONDITION REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF
ROBOSEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST ROBOSEN BE
GREATER IN AMOUNT THAN THE PURCHASE PRICE OF MACHINE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK
AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY ROBOSEN NOT CAUSED DIRECTLY BY THE GROSS
NEGLIGENCE OF ROBOSEN. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
disputes, which courts shall have exclusive jurisdiction of such claims or disputes. Notwithstanding the foregoing, Robosen may seek
injunctive or other equitable relief to protect its intellectual property rights in any court of competent jurisdiction.
Changes to this Product Information Guide:
The explanations and specifications in this guide are given for information only and may be modified at any time without prior notice.
The latest version of this guide will be available from our website at www.robosen.com. The explanations and specifications contained
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. in this guide are correct at the time of printing. Robosen reserves the right to amend or improve the product design or user g
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have
other rights, which vary from state to state.
Governing Law and Arbitration:
This Limited Warranty shall be governed by the laws of the State of California without giving effect to any conflict of laws principles that
may provide the application of the law of another jurisdiction. Any claim or dispute in connection with this Limited Warranty shall be
resolved in a cost effective manner through binding non-appearance-based arbitration. The arbitration shall be initiated through an
established alternative dispute resolution provider mutually agreed upon by the parties. The alternative dispute resolution provider
and the parties must comply with the following rules:
a) The arbitration shall be conducted by telephone, online and/or be solely based on written submissions, the specific manner shall
be chosen by the party initiating the arbitration;
b) The arbitration shall not involve any personal appearance by the parties or witnesses unless otherwise mutually agreed by the
parties; and
c) Any judgment on the award rendered by the arbitrator may be entered in any court of competent jurisdiction.
If the foregoing arbitration clause does not apply for any reason, you agree to submit to the personal jurisdiction of the state courts
located within LA County, California and the federal courts in Los Angeles, California for the purpose of litigating all such claims or
without any restrictions and without any obligation to notify users. As part of our ongoing effort to upgrade and improve our products,
the product that you have purchased may therefore differ slightly from the model described in this guide.
End of Life Product Disposal:
At the end of this product's life, please do not dispose of this product in your general household waste. Instead, in order to prevent
possible harm to the environment or human health from uncontrolled waste disposal, please dispose of this product separately in
accordance with your local laws and regulation. For more information on the separate collection systems for waste electrical a
electronic equipment that are available for consumers, near your home, free of charge, please contact your local municipality authority.
You can also contact the retailer from which you purchased your machine they might have put in place recycling services or he may
be part of a specific recycling program. This product will be then treated in an environmentally sound manner at a licensed recycling
plant and its components will be recovered, recycled or reused in the most efficient manner, in compliance with the requirements of
the Directive on Waste Electrical and Electronic Equipment (2002/96/EC) of 27 January 2003 (as subsequently amended or replaced).
IMPORTANT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
this equipment.
FCC regulatory conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, whi
ch can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
クイックスタートガイド
ロボット図解
マニュアル
USB
製品規格
クイックスタートガイド
x 1
x1
電源 ON
アプリのインス卜ール
x1
APP Store Android Android
K1
x1
176×99×349mm
0.94kg
ABS+PC
17 1 / 3×2 / 5×2
BLE 4.2
DC Type-C
2000 mAh
100 V-240 V~50/60 Hz 0.6 A DC 12 V 2 A
クイックスタートガイド
クイックスタートガイド
アブリによるコン卜ロール
Bluetooth ON
電源 OFF
See you next time humanity
音声によるコン卜ロール
Hey, K One
充電
自動的立ち上がり
Bluetooth ON/OFF
音声コマンドでコン卜ロ一ルします
アクション
K1 1000
プログラミング
3D
:
特別機能説明
特別機能説明
音声プログラミング
10
30
-
音声プログラミングの可視化( Bluetooth 状態)
APP Bluetooth -
;
;
;
;
;
;
;
特別機能説明
よくある問題
動作を共有する
APP- ;
;
説明動画
Robosen www.robosen.com)
Q
Q
App
Q
/