Optimus Prime Elite

robosen Optimus Prime Elite ユーザーマニュアル

  • こんにちは!Robosen Elite Optimus Primeのユーザーマニュアルの内容を理解しています。このロボットの機能、操作方法、トラブルシューティングなど、ご質問にお答えします。音声制御やアプリ操作、変形機能など、様々な機能についてお気軽にご質問ください!
  • ロボットの電源を入れない場合、どうすればよいですか?
    アプリがロボットに接続できない場合、どうすればよいですか?
    音声コマンドを使用してもロボットが反応しない場合、どうすればよいですか?
ROBOSEN.COM
© 2022 Robosen Robotics, Inc. All Rights Reserved.
TRANSFORMERS and all related characters are trademarks of Hasbro and are used with permission. © 2022 Hasbro.
All Rights Reserved. Licensed by Hasbro.
Microphone
Product Specification
Eye Lights
Rear
Lights
USB Data Port
Power Button
Charging Port
Product Specification Features Introduction
1 Axe & 1 Blaster
Accessories cannot be
used in touch mode
robosen
Elite Optimus Prime
Quick Start Guide
User Manual
Power Adapter
Data Cable
Dimensions
Weight
Material
Servo motor
Wireless Connection
Control Method
External Ports
Battery Capacity
Adapter
16 in.×10 in. ×5.7 in. (R) 5.11 in. x 6.69 in. x 12 in. (V)
1.8kg(63.4oz)
Aluminum Alloy Frame, ABS + PC shell
27 (Chest 2/Hands 6×2/Legs 5×2/Wheels 2/head 1)
Bluetooth Low Energy (BLE) 5.0
Mobile App, Voice Control
DC Charging Port, USB data cable
Li-polymer 11.1V 1200mAh
Input 100V-240V~50/60Hz 1A, Output DC 12.6V 1A
POWER ON
CHARGING
Take out the robot and place it on smooth flat surface(do not place on carpet).
Press and hold the power button until it says “I am the leader of the Autobots.” (about 5 seconds).
Connect the power supply adapter to the robot’s DC charging port. Plug in the power adapter to an
electrical outlet.
The indicator light of the power adapter changes from red to green when the robot is fully charged.
Features Introduction Features Introduction
“Hey,
Optimus Prime”
“Move Right” “Who Are You?”
“Protect”
“Loyalty”
“Power“Energon “Calling” “Hero” “Cancel “Customize” Start Actions”
“Victory”
“Volume Up”“Shutdown” Volume Down” “Freedom” “Guard “Honor” “Engage”
“Look Out”
“Return To
Headquarters” Stay Back” “Happy
Birthday” “Megatron” “Decepticons
“Move Forward”
“Report”Convert” “Are We
Friends?”
“Roll Out”
“Open Fire”
“Come Back” “Turn Left” “Turn Right”
“Attack” “Say Hello”
“Turn Around” “Move Left”
VOICE CONTROL VOICE CONTROL
VOICE COMMANDS
Say “Hey, Optimus Prime” to enter Voice Control mode, The robot will respond “Greetings.”
See the Voice Command Card for more preset voice commands;
(NOTE: Voice control functions cannot be used while the robot is connected with the device app. Disconnect from the robot app to use voice control.)
Say “Hey, Optimus Prime” to the robot. Wait for the robot to respond “Greetings” Say “Customize within 10
seconds. Robot is in voice customization mode after it responds with “Customize Your Arsenal”.
In the voice customize mode, say a voice command phrase to the robot, such as “Say Hello”, “Come Back”,
“Turn Left”. After saying each voice command, wait for the success prompt sound effect to indicate that
the robot acknowledged the command phrase, and then continue to say the next command phrase to add
to the sequence of execution.
Say “Cancel” to the robot if you need to exit Voice Programming Mode.
After inputting a set of voice customize words, you can say “Start Actions” to initiate these commands,
and the device will execute, in sequence, the command phrase actions you have programmed.
(NOTE: The device will automatically exit Voice Programming Mode if no commands are heard after 10 seconds. Voice command inputs have failed if you
don’t hear the sound effect after each command entry. If voice commands aren’t being recognized, please log into the app and review the section on
setting voice commands.)
Features Introduction Features Introduction
INSTALL MOBILE APP CONTROL VIA THE APP
POWER OFF
Search for “Robosen Elite Optimus Prime” in the App Store (for Apple devices) or
Google Play (for Android devices), then download and install.
Ensure your mobile Bluetooth settings are on.
Turn on the robot.
Open the device app, then tap connection icon located on the main page. An icon with your robot’s
unique serial number will appear, example: “OP-0000”. Tap on “OP-0000” icon.
Have fun controlling the robot via the app.
Press and hold the power button until the robot says, “Autobots never give up”.
If connected via the App, tap the connection icon located on the top-right corner of the main page, tap
the “Shutdown” icon.
Troubleshooting Troubleshooting
Q: Why is the robot malfunctioning?
• Turn off and restart the robot.
• Ensure the robot is fully charged.
• Check the website for video tutorials on troubleshooting issues.
• Contact customer service for additional help .
Q: Why is the robot unresponsive when i use voice command?
• Check the Blue tooth connection.
• Ensure the robot is disconnected from the App .
• Use the preset Voice Commands to control your robot.
• Ensure you are in a quiet setting with minimal background noise.
Q: Why can’t the robot keep its balance when it is walking or doing other actions?
• Ensure the robot is on a smooth flat surface,Robosen Optimus Prime will not
function properly on an uneven or bumpy surface.
Q: The robot does not power on?
• Ensure the Robot is fully charged. Charge the robot fully and power on.
• Press and hold the power button until the robot says “Greetings, I am Optimus Prime”.
Q: App cannot connect to the robot?
• Ensure the robot is fully charged and turned on.
• Ensure Bluetooth is enabled on your smart phone/tablet.
• Ensure your device permissions are enabled for the robot on your device.
• Ensure only one device is connected to the robot. Disconnect the robot from any other smart phone/
tablet you are not using.
Q: The robot still shows low battery after charging for a long time?
• Ensure both ends of the charging cable are properly plugged in.
Warnings FCC Requirement
WATCH YOUR FINGERS
Do NOT touch the product while it is converting or moving.
Do NOT forcibly remove or lift the head of the product.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.
FLAMMABLE
Do NOT open, crush, or expose the product to heat above 35°C.
Do NOT incinerate the battery.
WARNING: CHOKING HAZARD
SMALL PARTS. NOT FOR CHILDREN UNDER 3 YRS.
Disclaimer
PRODUCT AND LIMITED WARRANTY INFORMATION GUIDE
This guide contains safety, handling, disposal, recycling, and regulatory information as well as the limited warranty for the machine. Read all safety
information and operating instructions before using the machine to avoid harm or injury. Visit www.robosen.com for a downloadable version.
IMPORTANT SAFETY AND HANDLING INFORMATION
Read the following warning before you or your child play with the machine. Failing to do so may cause injury.
CAUTION
a)To reduce the risk of damage or injury, do not attempt to remove the machine’s shell.
b)Please refer all non-routine servicing questions to Robosen Robotics Inc.
c)No user-serviceable parts are contained inside.
CALIFORNIA PROPOSITION 65 WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND
BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
GENERAL
• Read all safety and operating instructions before operating machine.
• Retain the safety and operating instructions for future reference.
• Follow all operating and usage instructions.
• Do not attempt to service machine yourself. Refer all non-routine servicing to Robosen.
SEIZURE, BLACKOUTS AND EYESTRAIN
A small percentage of people may be susceptible to blackouts seizures (even if they have never had one before)when exposed to flashing
light patterns such as when playing games or watching video. If you have experienced seizures or blackouts or have a family history of such
occurrences, you should consult a physician before playing video games or watching videos. Discontinue use of machine and your smart device
controller and consult a physician if you experience headaches, blackouts, seizures, convulsion, eye or muscle twitching, loss of awareness,
involuntary movement, or disorientation. To reduce risk of headaches, blackouts, seizures, and eyestrain, you could avoid prolonged use, hold your
smart device controller some distance from your eyes, use machine in a well-lit room, and take frequent breaks You should.
KEEPING MACHINE WITHIN ACCEPTABLE TEMPERATURES
Operate and store machine in a place where the temperature is between 0 and 35C (32 to 95F). Low or high-temperature conditions might
temporarily shorten battery life or cause machine to temporarily stop working properly. Avoid dramatic changes in temperature or humidity when
using machine, as condensation may form on or within machine. Don’t leave machine in your car, because temperatures in parked cars can exceed
this range. When you’re using machine or charging the battery, it is normal for machine to get warm.
MAINTENANCE AND USE
Never:
• Abuse, throw, drop, puncture, violently kick or step on machine. Forcibly move the product or its parts. This can damage the robot and
compromise its safe operation.
• Operate machine on elevated surfaces (shelves, desks) where it can drop or fall. This can damage the robot and compromise its safe operation.
• Operate machine in dangerous, hazardous or public areas where use is not permitted (high voltage power lines, train stations, airports, trains).
Check whether use of machine is permitted before using it in public areas or public transport.
• Exceed one hour of continuous use. This can cause premature degradation of the product’s lifespan.
ALWAYS
• Keep machine in sight at all times when operating it to avoid injuries or damage to people, animals or property.
• Ensure that no one is standing nearer than 1 yard (0.91 meter) from machine when in operation and that you keep a safe distance between the
product and people, animals and property.
• Use the machine on smooth and flat surfaces
• Periodically examine machine for potential hazards such as cracked, damaged or otherwise broken parts. In the event of such damage, do not use
machine until it can be replaced or repaired.
BATTERY WARNING
• Lithium ion cells and batteries are extremely hazardous and liable to cause serious injuries to persons or property. The user accepts liability for the
use of a Lithium Polymer battery. As the manufacturer and the distributor cannot ensure the battery is used correctly (charging, discharging, storage,
etc.), they cannot be held liable for damages caused to persons or property.
• In the event of battery leakage, avoid the liquid coming into contact with skin and eyes. In case of contact with the skin, wash copiously with soap
and water. In case of contact with the eyes, rinse copiously with cold water and consult a doctor. If you notice a suspicious smell or noise or observe
smoke around the charger, disconnect it immediately.
• Non-cpmpliance with the instructions below could result in gas given off,rire,electric shock or an explosion.
CHARGING
• Examine the charger regularly for damage to the cord, plug, enclosure or other parts.
• The toy shall only be used with a transformer for toys.
• Never use a damaged charger or power adapter or third party charging accessories. Use only the supplied charging accessories provided. If
misused, the charging system can cause electrical shock.
• Never charge a leaky battery or one that has been damaged. Do not use the supplied charger/cables to charge any other device.
•Do not charge the battery nert flammable materials or on a flammable surface (carpet,wooden flooring,wooden furniture, etc.) or conducting
surface. Do not leave machine unattended during charging.
• Never charge the device immediately after use while it is still hot. Let it cool down to room temperature.
• Batteries are only to be charged under adult supervision.
• Do not cover your product or its charger while the battery is charging. Recharge the battery at a temperature obf etween 0 and 35C (32 to 95F). The
AC/ DC adapter is not a toy and are recommended to be operted by adults.
USE AND STORAGE
• Do not use machine if its cover has been broken and the battery’s plastic cover has been cracked or compromised in any way.
• Do not expose the battery to excessive physical shock.
• Do not expose machine and its battery to heat or dispose of a fire.
• Do not put the battery in a microwave oven or in a pressurized container.
• Do not attempt to dismantle, pierce, distort or cut the battery and do not attempt to repair the battery.
• Do not place any heavy objects on machine, the battery or charger.
• Do not clean the charger with a solvent,denatured alcohol or other flammable solvents.when cleaning,be sure to unplug the adapter and chaarger.
• It is essential to avoid short circuits. Avoid direct contact with the electrolyte contained within the battery. The electrolyte and electrolysis vapors are
harmful to health.
• Do not subject machine and its battery to large temperature variations. Do not place your machine near a source of heat.
• Disconnect the charger when you are not charging the battery.
BATTERY DISPOSAL
Machine and its batteries put into your general household waste can be harmful to the environment. Damaged or unusable batteries must be disposed of in a
container specially reserved for this purpose. When disposing of the battery, follow appropriate local guidelines and regulations. For further information
contact your local solid waste authority.
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
• This machine product, as supplied and distributed by Robosen Robotics Inc., and delivered new, in the original carton to the original customer
purchaser, is warranted by Robosen Robotics Inc. against manufacturing defects in materials and workmanship for a period of 1 year.
• Robosen will repair or replace this product, at our option and at no charge with new or reconditioned partsi, f found to be defective during the
limite warranty period specified above.
PRODUCT REGISTRATION
Register your product at robosen.com.
IF A DEFECT ARISES
• Please contact us at [email protected] to be provided with a Return Material Authorization Request (RMA) number.
• Provide this number with your package when shipping. We do not accept returns without the RMA numberP. urchaser is responsible for all
shipping costs.
SOFTWARE LICENSE
Use of machine is subject to the machine Software License Agreement.
EXCLUSIONS AND LIMITATIONS
This warranty covers the normal and intended use of machine. It applies only to the hardware product “machine” manufactured by Robosen
Robotics Inc. The Limited Warranty does not apply to any non-Robosen hardware product or any software, even if packaged or sold with the
machine hardware product. Refer to the software license agreement accompanying the software for details of your rights with respect to its use.
Robosen does not warrant that the operation of machine will be uninterrupted or error-free. Robosen is not responsible for damage arising from
failure to follow instructions relating to machines use.
This warranty does not apply to:
a) Consumable parts, such as batteries, or protective coatings designed to diminish over time unless failure has occurred due to a defect in
materials or workmanship;
b) Damage caused by use with non-machine products; cosmetic damage;
c) Damage caused by accidents,misuse,abuse,neglect,misapplication,fire,water,lightning or other acts of nature;incorrect electrical line voltage,
fluctuations or surges;damage caused bay improper installation;product alteration or modification;improper or unauthorized repair;exterior
finish or cosmetic damage;
d) Damage caused by operating machine outside the intended uses described by Robosen;
e) Defects caused by normal wear and tear or otherwise due to the normal aging of the machine product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANT-ABILITY OR
FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS, SHALL APPLY AFTER THE
EXPRESS WARRANTY PERIOD STAT ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON,
FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON ROBOSEN.
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, ROBOSEN IS NOT RESPONSI-
BLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, LOSS OF OPPORTUNITY, LOSS
OF GOODWILL, LOSS OF REPUTATION, LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, OR
ANY BREACH OF ANY WARRANTY OR CONDITION REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND
EVEN IF ROBOSEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND
AGAINST ROBOSEN BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF MACHINE. WITHOUT LIMITING THE FOREGO-
ING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT
SOLD BY ROBOSEN NOT CAUSED DIRECTLY BY THE GROSS NEGLIGENCE OF ROBOSEN. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights,which
vary from state to state.
GOVERNING LAW AND ARBITRATION
This Limited Warranty shall be governed by the laws of the State of California without giving effect to any conflict of laws
principles that may provide the application of the law of another jurisction through binding non-appearance-based
arbitration. The arbitration shall be initiated through an established alternative dispute resolution provider mutually agreed
upon by the parties. The alternative dispute resolution provider and the parties must comply with the following rules:
a)The arbitration shall be conducted by telephone,online and/or be solely based on written submissions,the specific manner
shall be chosen by the party initiating the arbitration;
b) The arbitration shall not involve any personal appearance by the parties or witnesses unless otherwise mutually agreed by
the parties;
c) Any judgment on the award rendered by the arbitrator may be entered in any court of competent jurisdiction. If the
foregoing arbitration clause does not apply for any reasons, you agree to submit to the personal jurisdiction of the state
courts located within LA County, California and the federal courts in Los Angeles, California for the purpose of litigating all
such claims or disputes, which courts shall have exclusive jurisdiction of such claims or disputes. Not with standing the
foregoing, Robosen may seek injunctive or other equitable relief to protect its intellectual property rights in any court of
competent jurisdiction.
CHANGES TO THIS PRODUCT INFORMATION GUIDE
The explanations and specifications in this guide are given for information only and may be modified at any time without pior notice.Thelatest
version of this guide will be available from our website at www.robosen.com.The expanations and specifications contained in this guide are
correct at the time of printing. Robosen reserves the right to amend or improve the product design or user guide without any restrictions and
without any obligation to notify users. As part of our ongoing effort to upgrade and improve our products, the product that you have purchased
may therefore differ slightly from the model described in this guide.
END OF LIFE PRODUCT DISPOSAL
At the end of this products life, please do not dispose of this product in your general household waste. Instead, in order to prevent possible harm
to the environment or human health from uncontrolled waste disposal, please dispose of this product separately in accordance with your local
laws and regulations. For more information on the separate collection systems for waste electrical and electronic equipment that are available for
consumers, nears your home, free of charge, please contact your local municipality authority.
You can also contact the retailer from which you purchased your machine they might have put in place recycling services or he may be part of a
specific recycling program. This product will be then treated in an environmentally sound manner at a licensed recycling plant and its
components will be recovered,recycled or reused in the most efficient manner,in compliance with the requirements of the Directive on Waste
Electrical and Electronic
Equipment (2002/96/EC) of 27 January 2003 (as subsequently amended or replaced).
IMPORTANT
ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S
AUTHORITY TO OPERATE THIS EQUIPMENT.
快速入门指引
电源开关
语音麦克风
充电接口
USB 接口
眼睛灯
车尾灯
将电源适配器的一端连接到机器人上另一端连接到电源插座。电源适配器的指示灯变为红色;
当机器人充满电后电源适配器的指示灯由红色变为绿色。
充电
从包装盒中小心地取出机器人置于平整的桌面;
按住车头顶部电源按键直到机器说出“Greetings.I am Optimus Prime.说明开机成功。
开机
产品规格 快速入门指引
产品尺寸
产品重量
产品材质
伺服舵机
通讯方式
控制方式
外围接口
电池容量
电源适配器
1.8kg
铝合金框架、ABS+PC外壳
27(胸部×2/手6×2/腿5×2/轮子×2/头×1)
BLE蓝牙5.0
手机App或语音控制
DC充电接口USB数据线接口
1200mAh 聚合物锂电池
输入100V-240V~50/60Hz 1A输出DC 12.6V 1A
人型态: W250*D158*H410(MM) 车型态: W145*D315*H175(MM) 能量斧头*1
爆能枪*1
精英版擎天柱
快速使用说明
说明书
电源适配器
数据线
语音控制
快速入门指引 快速入门指引
“擎天柱”
“右移”
“返回基地” “关闭电源
“能量晶体”
“召唤”“力量” “英雄” “胜利” “自定义” “取消” “开始执行”
“保护”
“减小音量”“增加音量” “自由” “保卫” “荣誉” “约定” “忠诚”
“退回去”“小心” “生日祝福” “威震天” “霸天虎”
“前进”
“报告”“变形” “我们是朋友吗?”
“出发”
“开火”
“后退” “左转” “右转”
“攻击” “打招呼” “你是谁”
“转弯” “左移”
请使用清晰和中等语速的普通话;
启动机器人;
对机器人说:“擎天柱”进入语音控制模式机器人将会回答:“Greetings10秒内使用命令词即可进行语音控制;
请每次只使用一个命令词机器人若未响应请再次对机器人说擎天柱”唤醒机器人;
拥有多种语音指令:可以在APP-设置中查看语音指令卡以获得丰富的预设语音指令;
注意:当机器人与App连接时无法使用语音控制功能断开与App的连接后才能使用语音控制功能。
语音指令卡
注意:
超过30秒不输入任何语音命令词会自动退出语音自定义模式;
输入一个命令词后听到机器人发出成功提示音效后才可继续输入下一个命令词否则输入失败;
需要获取更多语音指令请登录APP进入设置-语音指令卡处查看。
语音自定义技能非蓝牙状态
对机器人说“擎天柱”等待机器人语音响应“Greetings10秒内说“自定义”待机器人响应“customize
your arsenal”即可进入语音自定义动作模式;
在语音自定义模式下对着机器人说出语音命令词例如打招呼”“后退”“左转”说完一个词并听到成功
提示音效表明成功输入该命令词随后继续说出下一个需要执行的命令词即可。
需要退出语音编程模式可对机器人说“取消”
输入完一套语音命令词后便可说“开始执行”来执行这一套语音指令机器人将会按顺序根据您输入的命
令词执行动作任务;
快速入门指引 快速入门指引
在App Store(苹果用户或者在各大安卓应用市场安卓用户)中搜索
乐森精英版擎天柱”下载并安装手机应用。
安装手机应用
开启手机蓝牙;
启动机器人;
打开App主程序点击主界面中连接图标;
一个带有您的机器人唯一序列号图标将会出现例如:“OP-0000”点击“OP-0000”图标;
现可通过App操控机器人获得无穷的乐趣。
长按机器人的电源键直至机器人说“Autobots never give up.”即可关闭机器电源;
或者在App连接状态下点击主界面右上角设置图标进入设置界面然后在机器信息”栏中点击
关闭机器”按钮。
通过App连接机器
关机
常见问题 常见问题
Q:机器人出现故障?
①关闭并重启机器人;
②确保机器人电量充足;
③查看网上关于故障排除问题的视频教程;
④联系客服以获得更多帮助。
Q: 机器人无法使用语音指令唤醒或控制机器人?
①检查蓝牙连接;
②确保机器人与App断开连接;
③使用预设的语音指令来控制你的机器人;
④请确保机器人所处的环境无大量的噪音干扰。
Q: 机器人走路或者做某些动作时无法保持平稳?
确保机器人所处的地面为光滑平整摩擦力小的地面机器人不能凹凸不平的地面上工作。
Q: 机器人无法运行?
①确保机器人电量充足请给机器人充满电;
②按住电源键直至机器人说“Greetings.I am optimus Prime.”即可松手。
Q: App无法搜索或连接机器人?
①确保机器人电量充足并已经开机;
②确保手机/平板电脑的蓝牙已打开;
③确保你在设备上已启用你的机器人的设备权限;
④确保只有一个设备连接到机器人上断开你不使用的任何其他智能手机/平板电脑与机器人的连接。
Q: 充了很久电机器人仍然显示电量低?
请检查充电器插头与机器人的充电接口是否接触正常。
乐森机器人免责声明
警告:不适合三岁以下小孩玩耍会有窒息危险内有小零件。
警告
特别提醒:
特别提醒:
当心手指!产品在变形或运动时请勿触摸。
请勿用力掰动或提拿产品的头部。
请勿拆开、更换、焚烧或使其暴露在
35℃以上的高温下。
产品保修信息指南
本指南包含安全、管理、处理、回收和法规信息以及机器人的保修使用机器人之前请阅读所有安全信息和操作说明以免造成
损坏或伤害您也可以访问www.robosen.cn或微信公众号(Robosen乐森机器人以获得更多详细的信息和联系方式。
安全注意事项
在您或您的孩子玩机器人之前请阅读以下警告否则可能会造成伤害
注意:
为减少机器损坏或受伤的危险请勿尝试卸下机器人的外壳;
请将所有非机器常规维修的问题通过微信公众号或邮箱联系我们我们很乐意为您解答;
在使用的过程中遇到任何疑问都可以通过公众号或者邮箱的方式联系我们。
常规:
在操作机器人之前请阅读所有安全和操作说明;
保留安全和操作说明以备将来参考;
遵守所有操作和使用说明;
不要试图自己维修/拆卸机器人;
如果是自己人为的拆卸机器人导致机器的损坏官方会拒绝保修;
癫痫发作突然两眼发黑眼部疲劳:
当您在使用APP或者机器的过程中暴露于闪烁的灯光或灯光模式下例如玩游戏或观看视频时)可能会容易发生两眼发黑或癫痫
发作即使以前从未有过)如果您经历过癫痫发作或两眼发黑或有此类事件的家族史则应咨询医生在玩视频游戏或观看视频之
前。如果您遇到头痛两眼发黑癫痫发作抽搐眼睛或肌肉抽搐意识丧失不自主运动或迷失方向请停止使用机器人和智能设
备控制器并咨询医生。为降低头痛两眼发黑癫痫发作和眼疲劳的风险避免长时间使用将智能设备控制器与眼睛保持一定距离
在光线充足的房间内使用机器人APP并经常休息。
将机器人保持在可接受的温度内:
在温度介于0º至35ºC32º至95ºF)之间的地方操作和存放机器人低温或高温条件可能会暂时缩短电池寿命或导致机器人暂时停
止正常工作。使用机器人时请避免温度或湿度的剧烈变化因为在机器人上或内部可能会形成冷凝水请勿将机器人留在机动车
因为停放的车内温度可能会超过此范围。当您使用机器人或为电池充电时机器人变热是正常的
保养与使用
禁止:
请勿虐待投掷摔倒刺穿猛烈踢脚或踩踏机器人;
请勿强制拆卸产品或其零件这会损坏机器人并危及其安全操作;
请勿在可能掉落的物件架子桌子)上操作机器人这会损坏机器人并危及其安全操作;
请勿在不允许使用、危险或公共区域高压电源线火车站机场火车)操作机器人;
请在公共场所或公共交通工具中使用机器人之前请和相关工作人员确认是否允许使用机器人;
如果超过一小时的连续使用时间这可能会导致产品电池寿命的提前降低。
注意事项:
在操作机器人时请始终将其放在可以观察到的视野内以免造成人员伤亡或财产损失;
请确保没有人站在距离机器人1米)附近的地方并且要确保机器人与人动物和财产之间保持安全距离;
请尽量在光滑和平坦的表面上使用机器人否则会引起机器人摔倒;
定期检查机器人是否存在潜在危险例如机器人表面外壳破裂损坏或其他损坏的零件万一发生这种损坏,请在可更换或修理之前不要
使用机器人。
电池警告:
锂电池极度危险容易造成人身伤害或财产损失。用户对使用锂电池承担责任。由于制造商和分销商无法确保正确使用电池充电,放电,
存储等因此他们不承担对人身或财产造成的损害的责任;
如果您发现产品的电池泄漏请避免液体接触皮肤和眼睛。万一接触皮肤请用肥皂和水大量清洗如果接触到眼睛,请用冷水大量冲洗
并就医。如果发现可疑的气味、声音或在充电器周围发现烟雾请立即断开充电器的连接;
不遵守以下用法说明可能会释放出气体起火电击或爆炸
充电注意事项
定期检查机器人充电器的电源线插头外壳或其他零件是否有损坏;
该产品只能与产品随附的电源适配器一起使用;
切勿使用损坏的电源适配器或第三方充电配件;
切勿给漏液的电池或已损坏的电池充电。请勿使用产品附带的电源适配器为其他设备充电;
请勿在易燃材料附近或易燃表面地毯木地板木制家具等或导电表面上对电池充电;
电池充电时请勿遮盖产品或其充电器;
电源适配器不是玩具建议由成年人进行操作;
不要让机器长时间保持充电状态机器人充电完成后需要拔掉电源;
为了避免电池充电过量请避免在无人在家或夜间休息时进行机器充电;
为了更好的延长机器寿命请不要在机器人充电的过程中进行操作;
请避免在室内/室外温度达到40度以上的环境为机器充电。
日常使用及机器人存放:
如果机器人的保护盖已损坏并且电池的塑料保护盖已破裂或以任何方式损坏请勿使用机器人;
请勿使电池受到过度的物理冲击;
请勿使机器人及其电池受热或接触明火;
请勿将电池放入微波炉或加压容器中;
请勿尝试拆卸刺穿扭曲或切割电池也请勿尝试维修电池;
请勿在机器人、电池或充电器上放置任何重物;
请勿使用溶剂变性酒精或其他易燃溶剂清洁充电器;
必须避免短路。避免直接接触电池中包含的电解质电解质和电解蒸气对人体健康有害;
请勿使机器人及其电池受到较大的温度变化;
保修声明
保修服务:
由乐森机器人深圳)有限公司提供的机器人产品以原包装纸箱交付给客户购买者;由乐森机器人深圳有限公司担保不涉及制造商材
料和工艺缺陷的保修期为1年。
如果在上述指定的有限保修期内发现有缺陷乐森机器人深圳)有限公司将根据实际情况选择免费维修或更换此产品包括新零件或翻
新零件。
遇到问题:
如果您在使用产品的过程中发现了任务问题 请通过售后邮[email protected]或微信公众号(Robosen乐森机器人与我们联系
并且提供您的购买凭证从而让我们根据您的详细资料进行售后跟踪和为您提供售后服务。
乐森对如下情况造成的损坏不承担责任:
使用未经授权的第三方部件导致的可靠性或兼容性问题对产品造成的损坏;
使用低电量或有缺陷的电池操作本产品时所造成的损坏;
使用任何软件程序所造成的损坏无论是附带提供的还是之后安装的;
任何非乐森技术或支持所造成的损坏例如参考第三方对“如何”问题的解释或不正确的产品设置和安装;
没有标签或者标签已被改动的产品或部件。
/