Kyosho 32720 ユーザーマニュアル

カテゴリー
リモコンのおもちゃ
タイプ
ユーザーマニュアル

このマニュアルも適しています

THE FINEST RADIO CONTROL MODELS
R
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Before beginning assembly, please read these instructions thoroughly.
© Copyright 2010 KYOSHO CORPORATION /
32720-HS01
Thank you for purchasing the Chassis Set ASF 2.4GHz JSCC CUP Edition from the MINI-Z Racer
MR-03 Series.
This product is a special version of the MINI-Z Racer MR-03 Chassis Set Series and can be used
with body shells (Auto Scale Collection) compatible with the MR-03N-RM wheelbase L without
adjustments. Please use this instruction sheet together with the main instruction manual included
with the model.
MINI-Z Racer MR-03
Chassis Set ASF2.4GHz
JSCC CUP Edition
No.MZW1
The optional parts below are included as special features.
Ball Bearing Set Ball Differential Set
No.MZW13BL
Color Nylon Nut (Blue)
No.MZW206
Friction Shock Set (RM)
No.MZW207
Rear Oil Shock Set Front Spring Set
No.MZW216 No.MZW401
No.MZW404
Carbon Rear Suspension Plate Set (for RM/HM)
No.MZW402
Setting Tie-Rod Set
No.MZW412
SP Long King Pin Ball Set
Special Features
Please refer to the instructions included with the optional parts.
1
Higher grade battery terminals (gold plated terminals).
Spare chassis is equipped with normal type battery terminals.
2
Page 9
Page 3
< Optional Parts >
Refer to the instructions included for details on settings for the optional parts listed below.
< or >
For items included that are not referred to in the supplementary instruction sheet, refer to page 3 of the main manual .
At time of shipment, the adjustable collar is only temporarily set. Adjust properly to suit the driving conditions.
Some car body styles are not compatible with the friction shock. Go to the website
shown on page 3 and refer to the option parts list for the MR-03 (data table 4) to confirm compatibility with MZW216.
At time of shipment, the oil shock is not filled with oil. Refer to the instructions for the Oil Shock Set and fill with oil.
No.MZW206
Ball Differential Set
No.MZW216
Friction Shock Set (RM)
No.MZW207
Rear Oil Shock Set
About This Model
*Body / Chassis Set
*
BCS
*Chassis Set
*
CS
BCS CS
CS
3mm Spacer2mm Spacers Wheel Nuts
Start Pack
Items shown below are already installed or not required.
Included in the Box
CS
CS
BCS
3
Page 12
Chassis Set (MM Standard Configuration)
RM Rear Spring
RM Rear Suspension Plate
RM Motor Case
Chassis
MM Rear Suspension Plate
Carbon Rear Suspension Plate 2 types
Tie-Rod Set
Front Spring 4 types
Medium Hard
*Ball Differential Set Contents
*Option Parts
Instruction Manual
1.5mm Hex Wrench
Ball Differential Adjust Tool 3x3mm Set Screw
E2 E-ring O-ring P4 x 2 3x5x0.2mm Shim
*Friction Shock Set (RM) Contents
3mm Washer
*Rear Oil Shock Set Contents
Diaphragm
Adjustment Spacers x 3
MM Rear Spring
Silicone Oil (bottle #200)
Hobby Grease (sachet)
Items shown below are already installed or not required.
Items below are additional.
MM Motor Case
Included in the Box
Wheel Nuts (Spare)
0.5mm Suspension Limiter
Tie-Rod
4
Page 14
Page 15
Step has been changed as follows:
Start Guide
Body shells compatible with chassis type (RM), front tread (Narrow), wheelbase (L) can be used as they are. For chassis types
(MM), front tread (Wide) and wheelbase other than (L), please download "MR-03 Chassis Technical Guide" from the website
address listed on Page 3 of the instruction manual and reconfigure, adjust and prepare your chassis accordingly.
(Step 2 on Page 35 can also be referred to regarding changing of the wheelbase.)
(All parts required to change chassis type to (MM) and front tread to (Wide) are included.)
2
2
No work required.
Continue to use the 2mm and 3mm plastic bushings that are installed on the rear left.
Refer to the instructions for the ball differential set for further details.
Tires and wheels are not included.
1
Except for the rear left, all 2mm and 3mm plastic bushings have been replaced with 2x6x2.5mm and 3x6x2.5mm bearings.
Use the wheel wrench to remove the color nylon nuts and install wheels as per .
2
2
2
2
5
Page 60~61, 63
Exploded View
Refer to spare parts list on page 66 and 67
of the instruction manual regarding spare parts
not listed above.
© Copyright 2010 KYOSHO CORPORATION
The optional parts should be used for the parts marked with .
Steering Servo
OP
OP
No. Description
Ball Bearing Set
MZW1
2520
Color Nylon Nut
MZW13BL
525
Ball Differential Set
MZW206
3360
Rear Oil Shock Set
MZW207
1050
Friction Shock Set (RM)
MZW216
1995
Front Spring Set (for MR-03)
Setting Tie Rod Set (for MR-03)
MZW401
MZW402
1050
840
Carbon Rear Suspension Plate Set (RM/HM/MR-03)
MZW404
1365
SP Long King Pin Ball Set (MR-03)
MZW412
1470
Color Set of Long King Pin Ball (MR-03)
MZW412-1
630
Spare Parts
MZ402
MZ402
MZ402
MZ404
MZ402
MZ405
R/C
6
Page 60~61, 63
Exploded View
It is attached to the body set.
Steering Servo
MZ409
MZW207
MZ409
B
D
A
C
C
A
R/C
OP
MZ409
MZ409
MZ409
MZ402
MZ403
MZ406
MZ408
MZ409
MZ409
MZ402
MZ402
MZ402
MZ409
MZ402
MZ402
MZ401
MZ409
MZ409
MZ409
MZ402
MZW401
MZ406
MZ407
MZ402
MZW412-1
MZ407
MZW412-1
MZ203B
MZW412
MZW1
MZW13BL
MZ409 MZ409
MZW402
(Wide)
MZW402
(Narrow)
MZ406
(Narrow)
MZ406
(Wide)
MZ403
MZW1
MZ401
(Wide)
MZ401
(Narrow)
MZ206B
MZ401
MZW220
MZW207
7
Page 60~61, 63
Exploded View
© Copyright 2010 KYOSHO CORPORATION
MM
type
Optional parts should be used for the parts
marked with .
OP
OP
MZ153
MZ204
MZ6BK
MZ402
0.8mm
0.5mm
MZ402
R/C
MZ204
MZ153
(MZ206B)
MZ204
MZ204
MZW13BL
MZ204
MZ403
MZ409
MZ409
MZ6BK
MZW1
MZW13BL
MZ6BK
MZ9P
MZ409
MZ153
OP
OP
OP
OP
C
B
MZW206
MZW206
MZW1
MZW206
8
Page 60~61, 63
Exploded View
Optional parts should be used for the parts
marked with .
OP
OP
© Copyright 2010 KYOSHO CORPORATION
RM
type
32720-HS01
© Copyright 2010 KYOSHO CORPORATION /
61921003-1 PRINTED IN JAPAN
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.mini-z.jp/www.kyosho.com
MZ402
0.8mm
0.5mm
MZW206
MZW206
MZW1
MZW1
MZW206
R/C
MZW13BL
MZ409
MZW404
MZ403
MZ210
MZ409
MZ409
MZW1
MZW13BL
MZ210
MZ6BK
MZ9P
MZ6BK
MZ409
MZW216
MZ409
OP
OP
OP
OP
C
MZ210 MZ6BK
MZ402
D
1 / 1

Kyosho 32720 ユーザーマニュアル

カテゴリー
リモコンのおもちゃ
タイプ
ユーザーマニュアル
このマニュアルも適しています

他の言語で