ASROCK B450 Pro4 インストールガイド

Version 1.0

Published June 2018

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. If you require assistance please call ASRock Tel

: +886-2-28965588 ext.123 (Standard International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

B450 Pro4

1

English

Motherboard Layout

3

4

2

6

5

7

8

10

11

1

15

16

18

17

13

12

19

14

21

20

22

25

BIOS

ROM

ATXPWR1

Super

I/O

CLRCMOS2

1

USB_3_4

HD_AUDIO1

1

Top:

LINE IN

Center:

FRONT

Bottom:

MIC IN

RJ-45 LAN

SOCKETAM4

1

COM1

HDMI1

CMOS

Battery

ATX 12V1

M2_1

Ultra M.2

PCIe Gen3 x4

USB3_5_ 6

1

CHA_FAN1/WP

HDLED RESET

PLED PWRBTN

PANEL1

1

RoHS

SPK_PLED1

1

DDR4_A1 (64 bit, 288-pin module)

DDR4_A2 (64 bit, 288-pin module)

DDR4_B1 (64 bit, 288-pin module)

DDR4_B2 (64 bit, 288-pin module)

PCIE1

M2_2

AMD

Promontory

B450

USB 3.1 Gen1

T: USB1

B: USB2

USB 3.1 Gen1

T: USB3

B: USB4

AMD_FAN_LED1

1

USB_1_2

TPMS1

1

SATA3 _1

SATA3 _2

SATA3 _A 1

B450 Pro4

PCIE2

PCIE3

PCIE5

PCIE6

PCIE4

CHA_FAN2/WP CHA_FAN3/WP

SATA3 _A 2

SATA3 _3

SATA3 _4

USB 3.1 Gen2

T: USB31_TA_1

B: USB31_TC_1

USB 2.0

T: USB5

B: USB6

PS2

Keyboard

/Mou se

26

27

VGA1

DISPLAY1

CPU_FAN2/WP

CPU_FAN1

1

ADDR_LED1

1

RGB_LED1

9

23

24

English

2

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

3 AMD Fan LED Header (AMD_FAN_LED1)

4 CPU Fan / Waterpump Fan Connector (CPU_FAN2/WP)

5 CPU Fan Connector (CPU_FAN1)

6 ATX Power Connector (ATXPWR1)

7 USB 3.1 Gen1 Header (USB3_5_6)

8 SATA3 Connector (SATA3_2)

9 SATA3 Connector (SATA3_1)

10 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)

11 SATA3 Connector (SATA3_A1)

12 SATA3 Connector (SATA3_A2)

13 SATA3 Connector (SATA3_3)

14 SATA3 Connector (SATA3_4)

15 Power LED and Speaker Header (SPK_PLED1)

16 System Panel Header (PANEL1)

17 Chassis Fan / Waterpump Fan Connector (CHA_FAN3/WP)

18 Chassis Fan / Waterpump Fan Connector (CHA_FAN2/WP)

19 Clear CMOS Jumper (CLRCMOS2)

20 Addressable LED Header (ADDR_LED1)

21 USB 2.0 Header (USB_3_4)

22 USB 2.0 Header (USB_1_2)

23 COM Port Header (COM1)

24 RGB LED Header (RGB_LED1)

25 TPM Header (TPMS1)

26 Front Panel Audio Header (HD_AUDIO1)

27 Chassis Fan / Waterpump Fan Connector (CHA_FAN1/WP)

B450 Pro4

3

English

I/O Panel

1

8 7

9

1113

3

6

5

4

10

12

2

No. Description

8 USB 3.1 Gen1 Ports (USB3_12)

9 USB 3.1 Gen2 Type-A Port (USB31_TA_1)

10 USB 3.1 Gen2 Type-C Port (USB31_TC_1)

11 HDMI Port

12 D-Sub Port

13 PS/2 Mouse/Keyboard Port

No. Description

1

USB 2.0 Ports (USB56)

2 DisplayPort 1.2

3 LAN RJ-45 Port*

4 Line In (Light Blue)**

5 Front Speaker (Lime)**

6 Microphone (Pink)**

7 USB 3.1 Gen1 Ports (USB3_34)

* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

English

4

** To congure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi-

channel audio feature through the audio driver.

Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.

Function of the Audio Ports in 7.1-channel Conguration:

Port Function

Light Blue (Rear panel) Rear Speaker Out

Lime (Rear panel) Front Speaker Out

Pink (Rear panel) Central /Subwoofer Speaker Out

Lime (Front panel) Side Speaker Out

B450 Pro4

5

English

Chapter 1 Introduction

ank you for purchasing ASRock B450 Pro4 motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality

and endurance.

1.1 Package Contents

•

ASRock B450 Pro4 Motherboard (ATX Form Factor)

•

ASRock B450 Pro4 Quick Installation Guide

•

ASRock B450 Pro4 Support CD

•

1 x I/O Panel Shield

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

2 x Screws for M.2 Sockets (Optional)

Because the motherboard specications and the BIOS soware might be updated, the

content of this manual will be subject to change without notice. In case any modica-

tions of this manual occur, the updated version will be available on ASRock’s website

without further notice. If you require technical support related to this motherboard,

please visit our website for specic information about the model you are using. You

may nd the latest VGA cards and CPU support list on ASRock’s website as well.

ASRock website http://www.asrock.com.

English

6

1.2 Specications

Platform

•

ATX Form Factor

•

Solid Capacitor design

CPU

•

AMD AM4 Socket

•

Digi Power design

•

9 Power Phase design

•

Supports 105W Water Cooling (Pinnacle Ridge); Supports

95W Water Cooling (Summit Ridge); Supports 65W Water

Cooling (Raven Ridge)

Chipset

•

AMD Promontory B450

Memory

•

Dual Channel DDR4 Memory Technology

•

4 x DDR4 DIMM Slots

•

AMD Ryzen series CPUs (Pinnacle Ridge) support DDR4

3200+(OC)/2933/2667/2400/2133 ECC & non-ECC, un-

buered memory*

•

AMD Ryzen series CPUs (Summit Ridge) support DDR4

3200+(OC)/2933(OC)/2667/2400/2133 ECC & non-ECC, un-

buered memory*

•

AMD Ryzen series CPUs (Raven Ridge) support DDR4

3200+(OC)/2933(OC)/2667/2400/2133 non-ECC, un-buered

memory*

* For Ryzen Series CPUs (Raven Ridge), ECC is only supported

with PRO CPUs.

* Please refer to Memory Support List on ASRock's website for

more information. (http://www.asrock.com/)

* Please refer to page 23 for DDR4 UDIMM maximum frequency

support.

•

Max. capacity of system memory: 64GB

•

15μ Gold Contact in DIMM Slots

B450 Pro4

7

English

Expansion

Slot

AMD Ryzen series CPUs (Summit Ridge and Pinnacle Ridge)

•

2 x PCI Express 3.0 x16 Slots (PCIE2: x16 mode; PCIE4: x4

mode)*

AMD Ryzen series CPUs (Raven Ridge)

•

2 x PCI Express 3.0 x16 Slots (PCIE2: x8 mode; PCIE4: x4

mode)*

* Supports NVMe SSD as boot disks

* If M2_1 is occupied, PCIE4 will be disabled.

•

4 x PCI Express 2.0 x1 Slots

•

Supports AMD Quad CrossFireX

TM

and CrossFireX

TM

**

** is feature is only supported with Ryzen Series CPUs (Summit

Ridge, Pinnacle Ridge and Raven Ridge).

Graphics

•

Integrated AMD Radeon

TM

Vega Series Graphics in Ryzen

Series APU*

* Actual support may vary by CPU

•

DirectX 12, Pixel Shader 5.0

•

Max. shared memory 2GB

•

Three graphics output options: D-Sub, HDMI and

DisplayPort 1.2

•

Supports Triple Monitor

•

Supports HDMI with max. resolution up to 4K x 2K

(4096x2160) @ 24Hz / (3840x2160) @ 30Hz

•

Supports DisplayPort 1.2

with max. resolution up to 4K x 2K

(4096x2160) @ 60Hz

•

Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

•

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port

(Compliant HDMI monitor is required)

•

Supports HDCP with HDMI and DisplayPort 1.2 Ports

•

Supports 4K Ultra HD (UHD) playback with HDMI and

DisplayPort 1.2 Ports

English

8

Audio

•

7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)

* To congure 7.1 CH HD Audio, it is required to use an HD

front panel audio module and enable the multi-channel audio

feature through the audio driver.

•

Premium Blu-ray Audio support

•

Supports Surge Protection

•

ELNA Audio Caps

LAN

•

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

•

Realtek RTL8111H

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

Rear Panel

I/O

•

1 x PS/2 Mouse/Keyboard Port

•

1 x D-Sub Port

•

1 x HDMI Port

•

1 x DisplayPort 1.2

•

2 x USB 2.0 Ports (Supports ESD Protection)

•

1 x USB 3.1 Gen2 Type-A Port (10 Gb/s) (Supports ESD Pro-

tection)

•

1 x USB 3.1 Gen2 Type-C Port (10 Gb/s) (Supports ESD Pro-

tection)

•

4 x USB 3.1 Gen1 Ports (Supports ESD Protection)

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

•

HD Audio Jacks: Line in / Front Speaker / Microphone

Storage

•

4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,

RAID 1 and RAID 10), NCQ, AHCI and Hot Plug*

•

2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, sup-

port NCQ, AHCI and Hot Plug

* M2_2, SATA3_3 and SATA3_4 share lanes. If either one of

them is in use, the others will be disabled.

B450 Pro4

9

English

•

1 x Ultra M.2 Socket (M2_1), supports M Key type

2242/2260/2280 M.2 PCI Express module up to Gen3 x4

(32 Gb/s) (with Summit Ridge, Raven Ridge and Pinnacle

Ridge)**

•

1 x M.2 Socket (M2_2), supports M Key type

2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module and

M.2 PCI Express module up to Gen3 x2 (16 Gb/s) **

** If M2_1 is occupied, PCIE4 will be disabled.

** Supports NVMe SSD as boot disks

** Supports ASRock U.2 Kit

Connector

•

1 x COM Port Header

•

1 x TPM Header

•

1 x Power LED and Speaker Header

•

1 x RGB LED Header

* Supports in total up to 12V/3A, 36W LED Strip

•

1 x Addressable LED Header

* Supports in total up to 5V/3A, 15W LED Strip

•

1 x AMD Fan LED Header

*e AMD Fan LED Header supports LED strips of maximum

load of 3A (36W) and length up to 2.5M.

•

1 x CPU Fan Connector (4-pin)

* e CPU Fan Connector supports the CPU fan of maximum

1A (12W) fan power.

•

1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan

Speed Control)

* e CPU/Water Pump Fan supports the water cooler fan of

maximum 2A (24W) fan power.

•

3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan

Speed Control)

* e Chassis/Water Pump Fan supports the water cooler fan of

maximum 2A (24W) fan power.

* CPU_FAN2/WP, CHA_FAN1/WP, CHA_FAN2/WP and

CHA_FAN3/WP can auto detect if 3-pin or 4-pin fan is in use.

•

1 x 24 pin ATX Power Connector

•

1 x 8 pin 12V Power Connector

English

10

•

1 x Front Panel Audio Connector

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD

Protection)

•

1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports)

(Supports ESD Protection)

BIOS

Feature

•

AMI UEFI Legal BIOS with multilingual GUI support

•

Supports “Plug and Play”

•

ACPI 5.1 compliance wake up events

•

Supports jumperfree

•

SMBIOS 2.3 support

•

DRAM Voltage multi-adjustment

Hardware

Monitor

•

Temperature Sensing: CPU, MB

•

Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water

Pump Fans

•

Quiet Fan (Auto adjust chassis fan speed by CPU tempera-

ture): CPU, CPU/Water Pump, Chassis/Water Pump Fans

•

Fan Multi-Speed Control: CPU, CPU/Water Pump, Chassis/

Water Pump Fans

•

Voltage monitoring: +12V, +5V, +3.3V, Vcore

OS

•

Microso® Windows® 10 64-bit

Certica-

tions

•

FCC, CE

•

ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website:

http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjust-

ing the setting in the BIOS, applying Untied Overclocking Technology, or using third-

party overclocking tools. Overclocking may aect your system’s stability, or even cause

damage to the components and devices of your system. It should be done at your own

risk and expense. We are not responsible for possible damage caused by overclocking.

B450 Pro4

11

English

is is an ATX form factor motherboard. Before you install the motherboard, study

the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

•

Make sure to unplug the power cord before installing or removing the motherboard.

Failure to do so may cause physical injuries to you and damages to motherboard

components.

•

In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

•

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

•

When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

English

12

2.1 Installing the CPU

Unplug all power cables before installing the CPU.

2

1

B450 Pro4

13

English

3

English

14

2.2 Installing the CPU Fan and Heatsink

Aer you install the CPU into this motherboard, it is necessary to install a larger

heatsink and cooling fan to dissipate heat. You also need to spray thermal grease

between the CPU and the heatsink to improve heat dissipation. Make sure that the

CPU and the heatsink are securely fastened and in good contact with each other.

Installing the CPU Box Cooler SR1

Please turn o the power or remove the power cord before changing a CPU or heatsink.

1

2

B450 Pro4

15

English

3

4

C

P

U

_

FA

N

1

English

16

Installing the AM4 Box Cooler SR2

1

2

B450 Pro4

17

English

3

English

18

4-pin FAN cable

RGB LED Cable

+12V

*e diagram shown here are for reference only. Please refer to page 32 for the orientation of

AMD Fan LED Header (AMD_FAN_LED1).

5

CPU_

FA

N

1

AM

D

_

FA

N

_

L

E

D

1

4

C

P

U

_

FA

N

1

ページを読み込んでいます...

ASROCK B450 Pro4 インストールガイド

関連論文

その他の書類