2. Crest Audio
  3. Pro-LITE 2.0
Pro-LITE 2.0

Crest Audio Pro-LITE 2.0, Pro-LITE 2.0 DSP, Pro-LITE 3.0, Pro-LITE 3.0 DSP ユーザーマニュアル

  • こんにちは！Crest Audio Pro-LITE 2.0/3.0/2.0 DSP/3.0 DSPパワーアンプのオーナーズマニュアルの内容を理解しています。このマニュアルには、アンプの高効率設計、ACL™保護回路、DSPモデルの高度な信号処理機能などに関する情報が記載されています。アンプの使い方や機能に関するご質問があれば、お気軽にご相談ください。
  • アンプの電源電圧はどこで確認できますか？
    ACL™回路とは何ですか？
    クロスオーバーモードスイッチは何に使用しますか？
    DSPモデルのアンプにはどのような機能がありますか？
1
Pro-LITE
®
2.0 / 3.0
Pro-LITE
®
2.0 / 3.0 DSP
2
Pro-LITE
®
2.0 / 3.0
Pro-LITE
®
Pr o-LITE Crest
®
Pro-LITE
D
Crest
®
ACL
™
(Automatic Clip Limiting
) 2 ACL
Pro-LITE
Pro-LITE
®
50 kHz
A C
IEC ()
12 30cm
/
Pro-LITE
®
:
• 2
• ACL
™
(Automatic Clip Limiting)
• Pr o-LITE
®
D
•
• XLR 1/4
• 4
•
FCC 15 B
/
•
•
•
• /TV
3
AC
Pro-LITE
®
LED
ACTIVE DC TEMP SIGNAL ACL
™
LED
ACTIVE LED
Active LED Active LED
DC LED
Pro-LITE
DC LED
TEMP LED
Temp LED .
SIGNAL LED
LED 4 RMS ( 0.1 0 dB
x40)
ACL
™
(Automatic Clip Limiting) LED
A CL
™
LED LED
A CL™ LED
(1 A 1 B)
1
2
3
4
5
6
7
8
7
6
3
5
4
2
8
8
1
1
7
6
3
5
4
2
8
8
4
AC :
AC lEC
3
NOTE: FOR U.K. ONLY
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings identifying
the terminals in your plug, proceed as follows: (1) The wire which is colored green and yellow must be connected to
the terminal which is marked by the letter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire
which is colored blue must be connected to the terminal which is marked with the letter N, or the color black. (3) The
wire which is colored brown must be connected to the terminal which is marked with the letter L, or the color red.
HIGH PASS
HIGH P ASS Linkwitz -Rile y
100 Hz
HIGH PASS
FULL RANGE
SUBWOOFER
LO W PASS Linkwitz-Rile y
100 Hz
3 XLR ( 2+) 6.3 mm
4 1
9
10
12
11
13
9
13
10
10
11
11
12
5
Pro-LITE
™
DSP 2.0 / 3.0
Pro-LITE
®
DSP
Pro-LITE
™
DSP :
• ACL
™
• Pro-LITE D
•
• XLR 1/4”
• 1/4” 1/4” 4
•
• 1/4”
• LED
• DSP
• 120 ms
• 4
•
• 4 Linkwitz-Riley
• 4
•
• MAXX Bass
®
• EQ
• LCD
DSP
DSP
12” 30cm
/
FCC 15 B
/
•
•
•
• /TV
6
AC
LCD
LCD
Pro-LITE
®
5 LED ACTIVE DC TEMP SIG ACL
™
LED
ACTIVE LED
Active LED Active LED
DC LED
Pro-LITE
®
DC LED
TEMP LED
Temp LED .
SIGNAL LED
LED 4 RMS ( 0.1 0 dB x40)
ACL
™
LED
ACL
™
LED LED
ACL LED
(1 A 1 B )
1
2
3
4
5
6
7
8
9
8
7
4
6
5
3
2
1
8
7
4
6
5
3
9
9
9
9
7
AC :
AC lEC
3
NOTE: FOR U.K. ONLY
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire which is colored green and yellow must be
connected to the terminal which is marked by the letter E, or by the Earth symbol, or colored green or green and
yellow. (2) The wire which is colored blue must be connected to the terminal which is marked with the letter N, or the
color black. (3) The wire which is colored brown must be connected to the terminal which is marked with the letter L,
or the color red.
/
XLR
3 XLR (
2+) 6.3 mm
4 1 A
CH A 1+ Pos / 1- Neg B 2+ Pos / 2- Neg 4
10
11
12
13
10
12
13
13
11
11
12
8
Crest Audio DSP
/
Crest Pro-LITE
DSP
A B
/
9
A B
B
na
Pro-LITE
®
DSP 2.0 3.0 3 Pro-LITE
®
DSP 5.0 7.5 2
A BA B
AA B
DSP
Discard and Exit
Sa ve and
Exit
Save and Exit
Discard and Exit
10
XO VER
3 BP Filters
Independently A B
Channel B=A
A
B
X-o ver
Freq A Lows B Highs
1
A
Pro-LITE DSP 2.0 3.0
X-Over Freq A Lows B Highs
BP Filters Channel B=A
BP Filters Independently
Save and
Apply
11
EQ
BW-12 dB Butterworth 12 dB -3dB
Butterworth
BW-18 dB Butterworth 18 dB -3dB
Butterworth
BW-24 dB Butterworth 24 dB -3dB
Butterworth
LR-24 dB Linkwitz-Riley 24 dB -6dB
LR
12dB
1
Main Menu Discard Exit Save Exit
EQ
Pro-LITE DSP 5 EQ Waves
®
Maxx Bass
®
EQ
A B EQ B A
B=A A
EQ .
A&B
12
MaxxBass
®
EQ
EQ
The MaxxBass
®
MaxxBass
®
5 EQ
1/12
+/- 15 dB
EQ
6dB
Discard Exit Save Exit
125 mS
5 mS 41.67 uS
120 mS 1 mS
B=A 1 mS
Pro-LITE
MaxxBass
EQ
EQ
(mS)
(uS)
13
Pro-LITE DSP
-1dB
Pro-LITE DSP
3 dB
Save Settings
4 1
6
/
Save Settings
4 1
6
/
Pro-LITE
4
Pro-LITE 3
Pro-LITE 4 6
14
Crest
®
Pro-LITE
®
3.0
4 3640 20ms / 3000 1% THD @ 1kHz
8 2000 20ms / 1550 0.15% THD @ 1kHz
2ch x 2 1820 20ms / 1500 1% THD @ 1kHz
2ch x 4 1000 20ms / 900 1% THD / 830 0.15% THD
@ 1kHz
2ch x 8 540 20ms / 500 1% THD / 450 0.15% THD
@ 1kHz
2
RMS 71
20Hz - 28kHz; +0dB, -3.0dB / 1
20Hz - 20kHz 2ch x 2 <0.5% @ 1350 / 20Hz - 1380 / 20kHz
20Hz - 20kHz 2ch x 4 <0.15% @ 800 / 20Hz - 850 / 20kHz
20Hz - 20kHz 2ch x 8 <0.15% @ 450 / 20Hz - 500 / 20kHz
CMRR > - 76dB @ 1 kHz
x 75 (+37dB)
100 Hz 3
> -70dB
@ 1kHz @ 250 @ 8
> -100 dB, A @ 4
> 12V/s
(8 ) > 255:1 @ 20Hz - 1kHz @ 8
0.740 +/- 3% / 1kHz 4 0.710 +/- 3% / 1kHz
2
15k 7.5k
@ 1/8 960 (540) @ 2 620 (320) @ 4 400 (190) @ 8
VA
@ 1/3 2070 (1310) @ 2 1220 (700) @ 4 740 (400) @ 8
VA
140VA, 60
80 mm D C
2 HPF LPF
LED 5LED ACTIVE DC TEMP SIG ACL™
DC
1/4 XLR 2 + 4
x 3
18 ga.
3.5x19 x 10.5 + 0.6
5.54 kg (12.2 lbs.*)
6.30 kg (13.9 lbs.*)
BW 20 Hz - 22 kHz @ 120 VAC 24
0VAC
2
*
15
Crest
®
Pro-LITE
®
2.0
4 2100 20ms / 1950 @ 1kHz 1% T.H.D.
2ch x 2 1100 20ms / 900 1% THD @ 1kHz
2ch x 4 600 20ms / 570 1% THD / 530 0.15% THD
@ 1kHz
2ch x 8 370 20ms / 325 1% THD / 300 0.15% THD
@ 1kHz
2
RMS 56
10Hz - 30kHz; +/- 3 dB at 1 8
20Hz - 20kHz 2ch x 2 <0.25% @ 800 20Hz4kHz - 760 @ 20kHz
20Hz - 20kHz 2ch x 4 <0.15% @ 540 20Hz20kHz
20Hz - 20kHz 2ch x 8 <0.15% @ 300 20Hz20kHz
CMRR > - 69 dB @ 1 kHz
x 60 (+35 dB)
100Hz 3
> -70dB @ 1kHz @ 250 @ 8
> -100 dB A @ 4
> 12V/s
(8 ) > 170:1 @ 20Hz - 1kHz @ 8
.775 +/- 3% / 1kHz 4 .35 +/- 3% / 1kHz 2
15k 7.5k
@ 1/8 540 (315) @ 2 370 (185) @ 4 240 (115) @ 8
VA
@ 1/3 1250 (760) @ 2 750 (425) @ 4 460 (240) @ 8
VA
90VA 40
80 mm D C
2 HPF LPF
LED 5LED ACTIVE DC TEMP SIG ACL™
DC
1/4 XLR 2 + 4
x 3
18 ga.
3.5x19 x 10.5 + 0.6
4.94 kg (10.90 lbs.*)
6.02 kg (13.3 lbs.*)
BW 20 Hz - 22 kHz @ 120 VAC 240VAC
2
*
16
Crest
®
Pro-LITE
®
3.0 DSP
4 3650 20ms / 2960 1% THD @ 1kHz
8 2050 20ms / 1850 1% THD / 1680 0.15% THD
@ 1kHz
2ch x 2 1825 20ms / 1480 1% THD @ 1kHz
2ch x 4 1025 20ms / 925 1% THD / 840 0.15% THD
@ 1kHz
2ch x 8 550 20ms / 500 1% THD / 450 0.15% THD
@ 1kHz
2
RMS 70
20 Hz - 22 kHz; +/-.05dB @ 4
20Hz - 20kHz 2ch x 2 <0.15% @ 1,300 20 Hz3 kHz - 1,000 @ 20 kHz
20Hz - 20kHz 2ch x 4 <0.15% @ 800 20 Hz20 kHz
20Hz - 20kHz 2ch x 8 <0.15% @ 420 20 Hz20 kHz
CMRR > - 76 dB @ 1 kHz
x 37.75 (+31.5 dB)
12dB/oct
18dB/oct 24dB/oct B utterworth 24dB/oct Linkwitz –Riley
> -60 dB @ 1 kHz @ 100 @ 4
> -93 dB A @ 4
> 12V/s
(8 ) > 255:1 @ 20 Hz - 1 kHz @ 8
1.54 +/- 3% / 1kHz 4 1.47 +/- 3% / 1 kHz
2
12 6
@ 1/8 VA 960 (535) @ 2 615 (315) @ 4 400 (200) @
8
@ 1/3 VA 2065 (1360) @ 2 1215 (735) @ 4 740 (420) @ 8
160VA, 75
80 mm D C
2
L CD EQ
HPF LPF
LED 5LED ACTIVE DC TEMP SIG ACL™
DC
1/4 XLR 2 + 4
x 3
18 g
a.
3.5x19 x 10.5 + 0.6
5.62 kg (12.4 lbs.*)
6.80 kg (15.0 lbs.*)
5
BW <10 Hz - 22 kHz. @ 120 VAC 240VAC
2 AC
*
17
Crest
®
Pro-LITE
®
2.0 DSP
4 2100 20ms / 1950 @ 1kHz 1% T.H.D.
2ch x 2 1100 20ms / 900 1% THD @ 1kHz
2ch x 4 600 20ms / 570 1% THD / 530 0.15% THD
@ 1kHz
2ch x 8 370 20ms / 325 1% THD / 300 0.15% THD
@ 1kHz
2
RMS 56
10Hz - 30kHz; +/- 3 dB / 1
8
20Hz - 20kHz 2ch x 2 <0.25% @ 800 20Hz4kHz - 760 @ 20kHz
20Hz - 20kHz 2ch x 4 <0.15% @ 540 20Hz20kHz
20Hz - 20kHz 2ch x 8 <0.15% @ 300 20Hz20kHz
CMRR > - 69 dB @ 1 kHz
x 30 (+29.5 dB)
12dB/oct
18dB/oct 24dB/oct B utterworth 24dB/oct Linkwitz –Riley
> -70dB
@ 1kHz @ 250 @ 8
> -100 dB A @ 4
> 12V/s
(8 ) 170:1 @ 20Hz - 1kHz @ 8
1.53 +/- 3% / 1kHz 4 1.4 +/- 3% / 1 kHz
2
12 6
@ 1/8 VA 540 (315) @ 2 370 (185) @ 4 240 (115) @ 8
@ 1/3 VA 1250 (760) @ 2 750 (425) @ 4 460 (240) @ 8
90VA 40
80 mm D C
2 HPF LPF
LED 5LED ACTIVE DC TEMP SIG ACL™
DC
1/4 XLR 2 + 4
x 3
18 ga.
3.5x19 x 10.5 + 0.6
4.94 kg (10.90 lbs.*)
6.02 kg (13.3 lbs.*)
BW <10 Hz - 22 kHz. @ 120 VAC 240VAC
2
AC
*
18
19
20
ページを読み込んでいます...
/