Sony HT-CT790 ユーザーマニュアル

F:\#Sagyou\0329\4586049621\4586049621HTCT790SP1\00COV-

HTCT790SP1\010COV.fm

masterpage:

Right

HT-CT790

4-586-049-62(1)

HT-CT790

Operating Instructions

GB

CT

Sound Bar

HT-CT790

4-586-049-62(1)

F:\#Sagyou\0329\4586049621\4586049621HTCT790SP1\00COV-

HTCT790SP1\010BCO.fm

masterpage: Left

The software of this system may be updated in the future. To find out details on any available

updates, please visit the following URL.

http://www.sony-asia.com/section/support

2

GB

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has been

turned off.

As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in the

unit, disconnect the main plug from the

AC outlet immediately.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

For the Bar Speaker

The nameplate is located on the bottom

of the Bar Speaker.

WARNING

3

GB

Table of Contents

Supplied Accessories .....................5

Guide to Parts and Controls ..........6

About the Home Menu .................11

Connecting and Preparation

Connection for Viewing Copyright-

protected 4K Content ............ 14

Mounting the Unit on a Wall ....... 16

Connecting to a Wired

Network ..................................17

Connecting to a Wireless

Network ................................. 19

Listening to the Sound

Listening to the TV .......................21

Listening to the Connected

Device .....................................21

Listening to Music on a USB

Device .................................... 22

Selecting the Sound Effect

Setting the Sound Effect that is

Tailored to Sound Sources

(SOUND FIELD) .......................24

Enjoying Clear Sound with Low

Volume at Midnight

(NIGHT) .................................. 25

Making Dialogues Clearer

(VOICE) ...................................25

Adjusting the Volume of the

Subwoofer .............................26

Adjusting the Delay Between the

Picture and Sound .................26

Listening to Music/Sound

with the BLUETOOTH Function

Listening to Music from a Mobile

Device ....................................28

Listening to Sound of the

Connected TV or Device from

Headphones or Speakers ...... 31

Enjoying with the Network

Function

Listening to Music on your PC via a

Home Network ...................... 33

Listening to Music on Music

Services ..................................34

Listening to Music on the Mobile

Device with SongPal .............35

Using Google Cast .......................36

Connecting the SongPal Link-

Compatible Device

(Wireless Multi Room/Wireless

Surround) ...............................36

Displaying the Screen of the Mobile

Device on a TV

(MIRRORING) .........................38

Using the Various Functions/

Settings

Performing the Wireless Connection

of the Subwoofer (LINK) ........40

Playing Compressed Audio Files

with Natural Sound

Quality ................................... 41

Enjoying Multiplex Broadcast Sound

(AUDIO) .................................. 41

Deactivating Buttons on

the Unit ..................................42

Changing the Brightness of the

Front Panel Display and

BLUETOOTH Indicator

(DIMMER) ...............................42

Basic

connections and

preparation



Startup Guide

(separate

document)

4

GB

Saving Power in Standby

Mode ..................................... 43

Using the Control for HDMI

Function ................................ 44

Using the “BRAVIA” Sync

Function ................................ 46

Using the Setup Display .............. 48

Options Menu List ....................... 56

Troubleshooting

Troubleshooting ...........................57

Resetting the System .................. 65

Additional Information

Specifications .............................. 66

Playable Types of Files ................ 68

Supported Input Audio

Formats ................................. 69

Supported Input Video

Formats ................................. 70

On BLUETOOTH

Communication ..................... 71

END USER LICENSE

AGREEMENT ...........................72

Precautions ..................................76

Index ............................................ 80

5

GB

Supplied Accessories

•Bar Speaker (1)

• Wall mounting brackets (2), Screws (2)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) batteries (2)

• HDMI cable (4K 60p 18Gbps

compatible) (1)

•Startup Guide (1)

• Operating Instructions (1)

6

GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 Remote control sensor

 Front panel display

 BLUETOOTH indicator (blue)

– Flashes quickly in blue: During

pairing standby status

– Flashes in blue: BLUETOOTH

connection is being attempted

– Lights in blue: BLUETOOTH

connection has been established

 (power) button

Turns on the system or sets it to

standby mode.

 INPUT button (page 11, 21)

 PAIRING button (page 28)

 VOL +/– buttons

 N-Mark (page 29)

When using the NFC function, touch

your NFC-compatible device to the

mark.

 (USB) port

Unit (Bar Speaker)

7

GB

Rear

 LAN(100) port

 TV IN (OPTICAL) jack

 ANALOG IN jack

 HDMI IN 3 jack

Compatible with HDCP 2.2.

 HDMI IN 2 jack

Compatible with HDCP 2.2.

 HDMI IN 1 jack

Compatible with HDCP 2.2.

 HDMI OUT (TV (ARC)) jack

Compatible with HDCP 2.2.

8

GB

 Power indicator

– Lights in red: The subwoofer is in

standby mode

– Flashes in green: While

attempting link connection

– Lights in green: The subwoofer is

connected to the system with the

link function

 (power) button

Turns on the subwoofer or sets it

to standby mode.

 LINK button (page 40)

 Ventilation holes

For safety, do not block the

ventilation holes.

Subwoofer

9

GB

 INPUT +/– (page 11, 21)

 (power)

Turns on the system or sets it to

standby mode.

 DISPLAY

Displays playback information on

the TV screen.

 CLEAR AUDIO+ (page 24)

SOUND FIELD (page 24)

VOICE (page 25)

NIGHT (page 25)

 DIMMER (page 42)

 Color buttons

Shortcut keys for selecting items

on some menus.

 MIRRORING (page 38)

PAIRING (page 28)

 OPTIONS (page 26, 56)

BACK (page 11)

/// (page 11)

(enter) (page 11)

HOME (page 11)

 (muting)

Turns off the sound temporarily.

 (volume) +/–

Adjusts the volume.

SW  (subwoofer volume) +/–

Adjusts the volume of the

subwoofer.

Remote Control

10

GB

 Playback operation buttons

/ (rewind/fast forward)

Searches backward or forward.

/ (previous/next)

Selects the previous/next

chapter, track, or file.

 (play)

Starts or re-starts playback

(resume play).

 (pause)

Pauses or re-starts playback.

 (stop)

Stops playback.

 RX/TX (receiver/transmitter)

(page 32)

 AUDIO (page 41)

11

GB

About the Home Menu

You can display the home menu on the TV screen by connecting the system and TV

with the HDMI cable (supplied). From the home menu, you can set the various

settings by selecting [Setup] or select the input or service that you want to watch

from the input list.

1 Press HOME.

The home menu appears on the TV screen.

2 Press /// to select [Setup], an item on the input list, or [Wireless

Surround], then press .

The selected input, setup display, or setting display for the wireless

surround function appears on the TV screen.

To return to the previous screen, press BACK.

Using the Home Menu

[Setup]

Input list

[Wireless Surround]

HOME

BACK

///, (enter)

12

GB

Input list

[Setup]

See “Using the Setup Display” (page 48).

[Wireless Surround]

Displays the setting display for the wireless surround function that allows

you to use the wireless speakers (not supplied) as the surround speakers of

the system. Perform the setting by following the on-screen instructions.

Tip

You can also select the input by pressing INPUT +/– repeatedly.

Input name Explanation

[TV] Outputs the TV sound. (page 21)

[HDMI1] Outputs the sound of device that is connected to the HDMI IN 1

jack. (page 21)

[HDMI2] Outputs the sound of device that is connected to the HDMI IN 2

jack. (page 21)

[HDMI3] Outputs the sound of device that is connected to the HDMI IN 3

jack. (page 21)

[Bluetooth Audio] Outputs the sound of device that is connected with the

BLUETOOTH function. (page 28)

[Analog] Outputs the sound of device that is connected to the ANALOG IN

jack.

[USB] Outputs music or plays back photo files stored on a connected

USB device. (page 22)

[Screen mirroring] Displays the screen of the mobile device on the TV screen.

(page 38)

[Home Network] Outputs music or plays back photo files on the device that is

connected via the network. (page 33)

[Music Services] Uses music services on the Internet. (page 34)

13

GB

In these Operating Instructions, the operations are described as steps that are

operated on the home menu displayed on the TV screen by using the remote control

while the system and TV are connected with the HDMI cable (supplied).

The operating steps that select items on the TV screen by using /// and are

simplified in the following way.

Example: Select [Setup] from the home menu.

The operation that selects an item by pressing /// and is expressed as

“select.”

Example: Select [Network Settings] - [Internet Settings] - [Wired Setup] on the

home menu.

When repeating the operation that selects an item by pressing /// and , the

selected items are linked with “-.”

Tips

• You can use the buttons on the unit if they have the same or similar names as those on

the remote control.

• Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the

front panel display.

About the Steps Description

14

GB

Connection for Viewing

Copyright-protected 4K

Content

To view copyright-protected 4K content

and listen to sound from the system,

connect the TV and device to the system

via an HDCP2.2-compatible HDMI jack.

You can only view copyright-protected

4K content through the HDCP2.2-

compatible HDMI jack connection.

1 Check which HDMI input jack on

your TV is compatible with

HDCP2.2.

Refer to the operating instructions

of the TV.

2 Connect the HDCP2.2-compatible

HDMI input jack on the TV and

HDMI OUT jack on the unit with

the HDMI cable (supplied).

TV connection is completed.

Connecting and Preparation

Connecting a 4K TV and 4K

Device

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc™ player, cable box, or

satellite box, etc.

HDCP2.2-

compatible

HDMI jack

TV

 HDMI cable (supplied)

 HDMI cable (not supplied)

Premium High Speed HDMI Cable with

Ethernet that supports 18Gbps is

recommended.

15

GB

Connecting and Preparation

3 Connect the HDCP2.2-compatible

HDMI output jack of the 4K device

and HDMI IN jack of the unit with

the HDMI cable (not supplied).

Refer to the operating instructions

of the 4K device to check that the

HDMI OUT jack of the 4K device is

compatible with HDCP2.2.

4K device connection is completed.

4 Play copyright-protected 4K

content.

The image appears on the TV screen

and the sound is output from the

system.

Tip

You can connect the 4K device to any of

HDMI IN 1, HDMI IN 2, or HDMI IN 3 jack

because all jacks are compatible with

HDCP2.2.

If your TV’s HDCP2.2-compatible HDMI

IN jack is not compatible with ARC, the

TV sound is not output from the system.

In this case, connect the optical output

jack of the TV and the TV IN (OPTICAL)

jack on the unit with the optical digital

cable (not supplied).

When the TV’s HDMI Jack is

not Labeled with ARC

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player, cable box, or satellite

box, etc.

HDCP2.2-

compatible

HDMI jack

TV

 HDMI cable (supplied)

 HDMI cable (not supplied)

Premium High Speed HDMI Cable with

Ethernet that supports 18Gbps is

recommended.

 Optical digital cable (not supplied)

16

GB

Mounting the Unit on a

Wall

You can mount the unit on a wall.

• Prepare screws (not supplied) that are

suitable for the wall material and

strength. As a plasterboard wall is

especially fragile, attach the screws

securely in the wall beam. Install the

speakers horizontally, hung by screws in

studs in a continuous flat section of the

wall.

• Have the installation done by a Sony

dealer or licensed contractor and pay

special attention to safety during the

installation.

• Sony shall not be held responsible for

accidents or damage caused by improper

installation, insufficient wall strength,

improper screw installation or natural

disaster, etc.

1 Fix the wall mounting brackets

(supplied) to the bracket fixing

holes on the bottom of the unit

with the screws (supplied) so that

the surface of each wall mounting

bracket is as shown in the

illustration.

Fix the two wall mounting brackets

to the left and right fixing holes on

the bottom of the unit.

2 Prepare screws (not supplied) that

are suitable for the holes on the

wall mounting bracket.

Notes

Screw (supplied)

Wall mounting brackets (supplied)

Hole on the wall mounting bracket

4mm

More than 30 mm

4.6 mm

10 mm

17

GB

Connecting and Preparation

3 Fasten the screws in the wall.

The screw should protrude as

illustration.

4 Hang the holes of the mounting

bracket on the screws.

Align the holes at of the mounting

bracket with the screws, then hang

the unit on the two screws.

Connecting to a Wired

Network

Prepare the network by connecting the

system and PC to your home network

with a LAN cable.

The following illustration is the example

for connection of the system and PC to

your home network.

The server needs to be connected to the

same network as that of the system.

Tip

We recommend that you use a shielded

straight interface cable (not supplied).

730 mm

3.5 mm to

4.5 mm

Connecting to a PC or Router

with a LAN Cable

Note

Internet

LAN cable

(not supplied)

Server

Router

Modem

18

GB

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Auto].

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

5 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Manual].

5 Perform the setting by following

the on-screen instructions.

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

6 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

Connecting by Obtaining

the Network Information

Automatically

Connecting by Using a

Fixed IP Address

19

GB

Connecting and Preparation

Connecting to a Wireless

Network

Prepare the network by connecting the

system and PC to your wireless LAN

router.

The server needs to be connected to the

same network as that of the system.

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the

network settings with the WPS button.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless

Setup] - [Wi-Fi Protected Setup™

(WPS)].

4 Select [Start].

5 Press the WPS button on the

access point.

The system starts connecting to the

network.

If your wireless LAN router (access point)

is not compatible with Wi-Fi Protected

Setup (WPS), check the following

information in advance.

– The network name (SSID)*

_____________________________________

– The security key (password)**

_____________________________________

* SSID (Service Set Identifier) is a name that

identifies a particular access point.

**This information should be available

from a label on your wireless LAN router/

access point, from the operating

instructions, from the person who set up

your wireless network, or from the

information provided by your Internet

service provider.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless

Setup].

The list of the network name

appears on the TV screen.

4 Select the desired network name

(SSID).

5 Enter the security key (or

passphrase) using the software

keyboard, and then select [Enter].

The system starts connecting to the

network.

Note

Connecting with the WPS

Button

Connecting by Selecting the

Network Name (SSID)

20

GB

Select [New connection registration] -

[Manual registration] in step 4 of

“Connecting by Selecting the Network

Name (SSID)”and follow the on-screen

instructions.

Select [New connection registration] in

step 4 of “Connecting by Selecting the

Network Name (SSID)” and select [(WPS)

PIN Method].

SongPal app can connect the system to

the same wireless network as that of the

mobile device. For details, follow the

instruction of the app or refer to the

following URL.

http://info.songpal.sony.net/help/

Connecting by Using a Fixed

IP Address

Connecting by Using a PIN

Code

Connecting by SongPal

ページが読み込まれています...

Sony HT-CT790 ユーザーマニュアル

Sony HT-CT790 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント