MCD-UB575M
使用說明書
鐳射收綠機
CD
US
B
FOLDER/
MEMORY
REPEAT/
RANDOM
SKIP
/
SEARCH
U
B
M
5
14
61 - 69
70 - 78
3 - 61
62 - 88
89 - 115
116 - 142
143 - 170
171 - 197
198 - 224
ENGLISH
8 - 34
3 - 61
62 - 88
89 - 115
116 - 142
143 - 170
171 - 197
198 - 224
INSTRUCTION MANUAL
CD Portable
Radio Cassette Recorder
575PAcover.indd 1 2006.12.25 1:24:15 PM
1
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
ADVARSEL-USYNLIG LASER STRÅLING VED ÅBNING, NÅ
R
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION, UNDG
Å
UDS ÆTTELSE FOR STRÅLING.
VARNING-OSYNLIG LASER STRÅLNING NÄR DENNA DE
L
ÄR ÖPPNAD OCH SPÄRR ÄR URKOPPLAD. STRÅLEN ÄR
FARLIG.
VORSICHT! -UNSICHTBARE LASERSTRAHLUNG TRIT
T
A U S , W E N N D E C K E L G E Ö F F NET U ND E N
N
SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST. NICHT,
DEM STRAHL AUSSETZEN.
VARO !- AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
ÄlÄ KATSO SÄTEESEEN.
注意事項
如果不跟隨操作指南所指定的方法去使用操作裝置或調校性能
，
可能會導致暴露輻射的危險
。
本
機必須由符合正式資格的維修人員調校或修理
。
CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROP-
ERLY QUALIFIED PERSONNEL.
575PA1-4.indd 1 2006.12.5 10:39:21 AM
2
1 2 3
4
5
6
7
89
10
11
12
14
15
16
13
17 18 19 20 21
22
23
24
25
26
27
Fig./圖 1
1. 2. 3.
Fig./圖 2
28
29
31
30
575PA1-4.indd 2 2006.12.5 10:39:32 AM
3
CD
US
B
FOLDER/
MEMORY
REPEAT/
RANDOM
SKIP
/
SEARCH
U
B
M
1
2
3
4
5
6
7
8
CD
US
B
FOLDER/
MEMORY
REPEAT/
RANDOM
SKIP
/
SEARCH
U
B
M
Remote sensor
Within approx.
7 meters
7
Fig./圖 3
Fig./圖 4
Fig./圖 5
Fig./圖 6
Fig./圖 7
575PA1-4.indd 3 2006.12.5 10:39:35 AM
4
1
2
Fig./圖 8
Fig./圖 9
Fig./圖 10
Fig./圖 11
575PA1-4.indd 4 2006.12.5 10:39:38 AM
5
1. (RADIO, CD/USB, TAPE/OFF)
2.
3. (BAND)
4. (TUNING)
5.
6. (CD OPEN)
7. (REC)
8. (PLAY)
9. (REW)
10. (F. FWD)
11. (STOP/EJECT)
12. (PAUSE)
13. (PHONES)
14. USB (USB AUDIO)
15. (BASSXPANDER)
16. (VOLUME)
17. CD (CD)
18. (IR)
19.
20. (PLAY/PAUSE i)
21. (STOP n)
22.
(FILE+/e)
23.
(REPEAT/RANDOM)
24.
25. (MEMORY/FOLDER)
26.
(f/FILE-)
27. USB (USB)
28.
29. (AC INPUT~)
30.
31. FM
(FM MODE/BEAT CANCEL)
注意事項
- ( )
( 5
35 )
-
-
-
-
-
-
緊急處理方法
中 文
控制器（圖１）
遙控器
控制器（圖 3）
1. (i)
2. (n)
3. CD (CD)
4.
(REPEAT/RANDOM)
5. USB (USB)
6. ( )
7.
(f, e, - FOLDER+, SKIP/SEARCH)
8.
(FOLDER/MEMORY)
安裝電池（圖 4）
5 “AAA/HP16/R03
遙控範圍（圖 5）
575PACh.indd 5 2006.12.25 1:12:00 PM
6
交流電電源
( A C
INPUT ~)
-
- FUNCTION
電池
安裝電池
2 “D/HP2/R20”
有關電池注意事項
1 (
)
2
3
4
5
調較音量
VOLUME
低音擴展器按鈕
( B A S S X PA N D E R
ZON
耳機
PHONES
電源供應 一般操作
575PACh.indd 6 2006.12.25 1:12:00 PM
7
播放鐳射唱片
6 12
8
1. FUNCTION CD/USB
2. CD OPEN
“OP”
3. 7
4. (PUSH TO CLOSE )
5. PLAY/PAUSE i
- f/FILE-
FILE+/e PLAY/
PAUSE i
“no”
處理鐳射唱片的要點
( )
暫停播放
PLAY/PAUSE i k
歌曲跳越
FILE+ e “06
f FILE- “03”
搜尋（前進／倒後）
FILE+/e f/FILE-
6. STOP n
7. FUNCTION
TAPE/OFF
STOP n
CD-R/RW
CD-R/RW
575PACh.indd 7 2006.12.25 1:12:03 PM
8
各種播放模式
REPEAT/RANDOM
播放預先編排的歌曲
32
- “CD/
USB”
-
-
1. STOP n
2. MEMORY/FOLDER “P01”
“MEMORY” “ ”
“MEMORY”
3. f
/FILE-
FILE+/ e
4. MEMORY/FOLDER
5. 3 4
6. PLAY/PAUSE i
“MEMORY”
-
- 32 “FUL”
-
STOP n
撿查預先編排的歌曲
MEMORY
MEMORY/FOLDER
更改預先編程
要為編程增加一首新樂曲：
1. MEMORY/FOLD-
ER
2.
3. MEMORY/FOLDER
改變樂曲
1. MEMORY/FOLD-
ER
2.
3. MEMORY/FOLDER
遇上下列情況應怎麼辦...
CD光碟
“REPEAT 1” “REPEAT ALL”
( )
( )
“RANDOM”
(
)
[MP3 CD] [USB]
“REPEAT 1”
( )
“REPEAT FOLDER”
(
)
“REPEAT ALL ”
( )
“RANDOM”
(
)
)
MEMORY
MEMORY
MEMORY
575PACh.indd 8 2006.12.25 1:12:06 PM
9
MP3/WMA (Win-
dow Media Audio) CD-R/RW MP3/
WMA CD
MP3/WMA CD 信息
- MP3/WMA CD ISO9660
“.MP3” “.mp3”/ “.WMA” “.wma”
- :
MP3 文件:
MPEG-1
32 kHz, 44.1 kHz, 48 kHz
32 kbps ~ 320 kbps ( )
WMA 文件:
WMA 7, 8 9
32 kHz, 48 kbps ~ 64 kbps
44.1 kHz, 48 kbps ~ 192 kbps
48 kHz, 128 kbps ~ 192 kbps
WMA9 WMA9
DRM ( )
- MP3/WMA CD
ISO
-
- 500
999 501 1000
- 8
- MP3/WMA CD
- “CD Extra”
- Mixed CD
- (Packet
Writing)
MP3光碟目錄網域舉例：
: 01 v 02 v ... v
14
MP3/WMA
CD-R/RW MP3/WMA
128 kbps
( 320 kbps)
F01
F01
01.mp3
02.mp3
03.mp3
04.mp3
05.mp3
F01
MP3
06.mp3
07.mp3
08.mp3
09.mp3
10.mp3
F02
11.mp3
12.mp3
F02
13.mp3
14.mp3
F04
F04
F03
F03
MP3 CD
MP3/WMA CD 操作情況
(Track-at-Once) (Disc-
at-Once) (Packet Writing)
(Track-at-Once)
(Disc-at-Once)
(Track-at-Once)
( P a c k e t
Writing)
575PACh.indd 9 2006.12.25 1:12:07 PM
10
MP3/WMA光碟播放
1. MP3/WMA ( 7 )
MP3/WMA
2. PLAY/PAUSE i
3. MEMORY/FOLDER “FOLDER”
f
/FILE-
FILE+/e ( FOLDER-
FOLDER +)
4.
f
/FILE-
FILE+/e
5. PLAY/PAUSE i
6 STOP n
- no
-
播放預先編排的歌曲
32
- “CD/
USB”
-
-
1. STOP n
2. MEMORY/FOLDER “P01”
“MEMORY” “ ”
“MEMORY”
3. f
/FILE-
FILE+/e
FOLDER- FOLDER+
4. MEMORY/FOLDER , “P02”
“MEMORY” “ ”
“MEMORY”
5. 3 4 .
6. PLAY/PAUSE i
“P01”
“MEMORY”
7. STOP n
STOP n
檢查預先編排
MEMORY
MEMORY/FOLDER
更改預先編排
要為編程增加一首新樂曲:
1. MEMORY/FOLDER
2.
3. MEMORY/FOLDER
改變樂曲:
1. MEMORY/FOLDER
2.
3. MEMORY/FOLDER
:
MP3
MEMORY
MEMORY
MEMORY
MP3
575PACh.indd 10 2006.12.25 1:12:09 PM
11
USB 記憶設備操作
重要信息：
-
- USB
.
- :
USB
:
USB
-
使用前
USB AUDIO USB
USB AUDIO 8
- USB
- MP3 WMA (Window Media
Audio)
- USB 1999
-
.
- 9 “MP3/WMA CD ”
基本播放
1. USB USB
USB
- USB
USB “no”
- USB
“no”
2. PLAY/PAUSE i
3. MEMORY/FOLDER “FOLDER”
f
/FILE-
FILE+/e ( FOLDER-
FOLDER +)
4.
f
/FILE-
FILE+/e
5. PLAY/PAUSE i
6. STOP n
7. USB FUNCTION
TAPE/OFF
暫停播放
7 “ ”
播放預先編排的歌曲
10
USB
USB
MP3
575PACh.indd 11 2006.12.25 1:12:11 PM
12
1. FUNCTION TAPE/OFF
STOP/EJECT
3. 9
4. PLAY
5. STOP/EJECT
:
- (TYPE 1)
-
- C-100
暫停
PAUSE
快進和倒帶
F.FWD REW
STOP/EJECT
1. FUNCTION RADIO
2. BAND
3. TUNING
4. FUNCTION
TAPE/OFF CD/USB
收聽FM立體聲廣播
FM MODE ST
FM
FM MODE
MONO
改善接收
(FM)
(AM)
收听卡式錄音帶
收聽收音機
卸除USB記憶設備
USB :
- STOP n ( n )
-
-
USB
自動停止系統
STOP/EJECT
( C-60 )
2
STOP/EJECT
575PACh.indd 12 2006.12.25 1:12:12 PM
13
綠音
SANYO
從USB記憶設備錄音 (同步 音)
1.
2. “USB”
3. USB .
-
-
4. REC PLAY
5. STOP/EJECT
USB
從鐳射唱片錄音 (同步 音)
1.
2. “CD”
3.
-
-
4. REC PLAY
5. STOP/EJECT
CD
從內置收音機錄音
1.
2.
3. REC
4. STOP/EJECT
如果聽到“拍音”聲
BEAT CANCEL 1 2
預防不慎抹去綠音內容
A (1)
B (2) ( 10)
(3)
REC
保養
清潔磁頭
清潔鐳射唱片機的鏡片
( 11)
清潔本機
575PACh.indd 13 2006.12.25 1:12:12 PM
14
1. Function switch (RADIO, CD/USB, TAPE/
OFF)
2. CD Compartment Lid
3. Band select switch (BAND)
4. Tuning control (TUNING)
5. Frequency indicator
6. CD compartment open button (CD OPEN)
7. Record button (REC)
8. Play button (PLAY)
9. Rewind button (REW)
10. Fast forward button (F. FWD)
11. Stop/Eject button (STOP/EJECT)
12. Pause button (PAUSE)
13. Headphones socket (PHONES)
14. USB port (USB AUDIO)
15. Bass expander button (BASSXPANDER)
16. Volume control (VOLUME)
17. CD function button (CD)
18. Remote sensor (IR)
19. Display
20. Play/Pause button (PLAY/PAUSE i)
21. Stop button (STOP n)
22. Skip/Search up/Folder select button
(FILE+/e)
23. Repeat/Random button
(REPEAT/RANDOM)
24. Cassette holder
25. Memory/Folder button (MEMORY/FOLDER)
26. Skip/Search down/Folder select button
(f/FILE-)
27. USB function button (USB)
28. Telescopic aerial
29. AC input socket (AC INPUT~)
30. Battery compartment lid
31. FM mode/Beat cancel switch
(FM MODE/BEAT CANCEL)
PRECAUTIONS
- The apparatus shall not be exposed to dripping
or splashing.
- No object filled with liquid, such as vase shall
be placed on the apparatus.
- Do not use where there are extremes of
temperature (below 5
o
C or exceeding
35
o
C).
- Because of the CD playerʼs extremely low
noise and wide dynamic range, there
might be a tendency to set the volume on
the amplifier unnecessarily high. Doing so
may produce an excessively large output
from the amplifier which could damage your
speakers.
- Sudden change in the ambient temperature
may cause condensation to form on the opti-
cal lens inside the unit. If this happens, take
out the disc, leave the unit for about 1 hour,
and then proceed to operate.
- Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
- To be completely disconnect the power input,
the mains plug of apparatus shall be discon-
nected from the mains.
- Do not install this equipment in a con-
fined space, such as a book case or built in
cabinet.
- The rating label is located on the back of
the unit.
Emergency measures
If this product has a problem, turn off the power,
disconnect the mains lead then contact our ser-
vice station immediately.
An appropriate service will be offered by our ser-
vice station.
ENGLISH
CONTROLS (Fig.1)
REMOTE CONTROLLER
Controls (Fig. 3)
1. Play/Pause button (i)
2. Stop button (n)
3. CD function button (CD)
4. Repeat/Random button
(REPEAT/RANDOM)
5. USB function button (USB)
6. Batteries compartment (back of the unit)
7. Skip/Search/Folder select buttons
(f, e, - FOLDER+, SKIP/SEARCH)
8. Folder/Memory button
(FOLDER/MEMORY)
Inserting batteries (Fig. 4)
Install two “AAA/HP16/R03” batteries (not sup-
plied).
Note:
Always remove batteries if the remote controller
is not to be used for a month or more. Batteries
left in it may leak and cause damage.
Remote control range (Fig. 5)
The buttons on the remote controller perform
similar function to similarly marked buttons on
the main unit.
575PAEn.indd 14 2006.12.5 11:04:13 AM
15
AC Power
Connect one end of the mains lead to the AC
INPUT ~ socket and the other end to an AC outlet.
Note:
- The installed batteries are automati-
cally disconnected when the mains lead is
connected to the unit.
- The FUNCTION switch is mounted on
the secondary side. The unit is not discon-
nected from mains, even switched off.
Battery power
Installing batteries
Install eight “D/HP2/R20” batteries (not sup-
plied) as shown in Fig. 2.
Caution on batteries
To prevent battery electrolyte leakage, which may
result in injury and damage to the unit or other
objects, observe the following precautions:
1. All batteries must be installed with the prop-
er polarity (see diagram on the back of the
unit).
2. Do not mix new with old or used batteries.
3. Only use batteries of the same type and
brand.
4. Remove the batteries when they are not to be
used for a long period time.
5. When the batteries have become discharged,
they must be disposed of in a safe manner
which complies with all applicable laws.
Adjusting the volume
Turn the VOLUME control.
Bass expander button
Press the BASSXPANDER button to Z ON to
enhance the bass sound.
Headphones
Connect stereo headphones (not supplied) to the
PHONES socket for monitoring or for private
listening. The speakers are automatically
disconnected when headphones are connected.
POWER SUPPLY GENERAL OPERATION
575PAEn.indd 15 2006.12.5 11:04:14 AM
16
CD PLAY
Use compact discs bearing the symbol shown
in Fig. 6. In addition to conventional 12cm CDs,
this unit can be used to play 8cm CDs without
an adapter.
1. Set the FUNCTION switch to CD/USB.
2. Press the CD OPEN button to open the CD
compartment lid. “OP” appears on the dis-
paly.
3. Place the disc with the label facing up on the
turntable (Fig. 7). (Place only one disc at a
time.)
4. Press the CD compartment lid (PUSH TO
CLOSE portion) to close it.
The total number of tracks on the disc appears
on the display.
5. Press the PLAY/PAUSE i button.
The current track number appears. Play starts
from the first track.
- To start play from the desired track, select
the track by using the f/FILE- or FILE+/
e button, then press the PLAY/PAUSE
i button.
Note:
If no disc is loaded or the disc is located with the
label facing down, “no” appears. If these occur,
load the disc correctly or replace the damaged
disc.
Notes on handling compact discs
- Do not expose the disc to direct sunlight,
high humidity or high temperature for ex-
tended periods of time.
- Discs should be returned to their cases after
use.
- Do not apply paper or write anything on the
disc surface.
- Handle the disc by its edge. Do not touch
the playing surface (glossy side).
- Fingerprints and dust should be carefully
wiped off the playing surface of the disc
with a soft cloth.
Wipe in a straight motion from the center to
the outside of the disc.
- Never use chemicals such as record clean-
ing sprays, antistatic sprays or fluids, ben-
zene or thinner to clean compact discs.
Temporarily stopping play
Press the PLAY/PAUSE i button, “k” ap-
pears on the display. To resume play, press the
button again.
Skip play
Example:
To skip to track 6 while track 3 is playing, press
the FILE+/e button repeatedly until “06” ap-
pears on the display. To skip back to track 3
while track 6 is playing, press the f/FILE-
button repeatedly until “03” appears.
Search (forward/reverse)
If the FILE+/e or f/FILE- button is pressed
during play, the player will search at high speed
in the forward or reverse direction while the
button is being pressed. When the button is re-
leased, normal play will continue.
6. Press the STOP n button to end disc play
back.
When the last track has been played, the player
stops automatically.
7. To turn the CD player off, set the FUNCTION
switch to TAPE/OFF.
Note:
Do not open the CD compartment during CD play.
Always press the STOP n button and wait for
the disc to stop rotating before opening the CD
compartment.
This unit can play back the CD-R/RW as well.
However, some CD-R/RW can not be played back
depending on the recording conditions.
575PAEn.indd 16 2006.12.5 11:04:15 AM
17
Various playing mode
Press the REPEAT/RANDOM button repeatedly
to select a various play mode available. Each
time the button is pressed, the mode changes
as shown below:
PROGRAMMED PLAY
Up to 32 tracks on a disc can be programmed for
play in any order.
- To begin the programming procedure, set
FUNCTION switch to “CD/USB” first.
- The same track can be programmed more
than once.
- Load a disc that you want to programme be-
fore starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the
“P01” and “MEMORY” appear briefly, then
“ ” appears and “MEMORY” blinks.
3. Select a track by using the f
/FILE-
or
FILE+/ e button.
4. Press the MEMORY/FOLDER button.
5. Repeat steps 3 - 4 to programme addition-
al tracks.
6. Press the PLAY/PAUSE i button to start
playback. “MEMORY” remains lit.
When all programmed tracks have been
played, the player stops automatically.
- The programme contents are retained
in memory.
- Any attempt to programme more than 32
tracks will result in “FUL” appears and
discontinuous of the programming.
- To cancel programmed play, press the STOP
n button twice during play.
Checking the programme
In stop mode when MEMORY remains lit, press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.
Changing a programme
To add a new track to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a track as explained above.
3. Press the MEMORY/FOLDER button.
To change a track:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the track number
to be replaced is displayed.
2. Select a track as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
[CD]
“REPEAT 1” appears “REPEAT ALL”
(Repeat one track) appears
(Repeat all tracks)
“RANDOM” appears
(All tracks on the disc
are played back in
random order.)
Released
(Normal play)
[MP3 CD] [USB]
“REPEAT 1” appears
(Repeat one track)
“REPEAT FOLDER”
appears
(Repeat all tracks in
the folder)
“REPEAT ALL ”
appears
(Repeat all tracks)
“RANDOM” appears
(All tracks on the disc
are played back in
random order.)
Released
(Normal play)
Note:
Random play will not be selected during pro-
grammed playback.
MEMORY
MEMORY
MEMORY
575PAEn.indd 17 2006.12.5 11:04:18 AM
18
WHAT TO DO IF...
If an abnormal display indication or an operat-
ing problem occurs, disconnect the mains lead
and remove all batteries. Wait at least 5 seconds,
then reconnect the mains lead and reinstall the bat-
teries.Resume the operation.
This unit can play the CD-R/RW that has re-
corded music data, MP3 or WMA (Window Me-
dia Audio) files. Before playing MP3/WMA CD,
please read the following.
MP3/WMA CD information
- MP3/WMA CD is the disc that standardized
by ISO9660, its file name must have the ex-
tension letters, “.MP3” or “.mp3”/ “.WMA” or
“.wma”.
- Standard, sampling frequency, and the bit
rate:
MP3 files:
MPEG-1 Audio
32 kHz, 44.1 kHz, 48 kHz
32 kbps ~ 320 kbps (constant bit rate or vari-
able bit rate)
WMA files:
WMA version 7, 8 and 9
32 kHz, 48 kbps ~ 64 kbps
44.1 kHz, 48 kbps ~ 192 kbps
48 kHz, 128 kbps ~ 192 kbps
WMA9 professional files, WMA9 lossless
files or DRM (copyright protection) files can
not be played.
- The directory and file names of the MP3/
WMA CD must be corresponded to the ISO
standardized files.
- Single-session disc can be played back. As
for multi-session disc, only the first session
can be played back.
- This unit can recognize up to 500 folders or
999 files per disc. The CD with 501 folders
or 1000 files and over is not available to this
unit.
- This unit can recognize up to 8 directory trees
per disc.
- MP3/WMA CD may not be played in the re-
corded order.
- Music section in “CD Extra” can be played
back, not Data section.
- “Mixed CD” cannot be played back.
- Music files recorded by “Packet Writing” can
not be played back.
MP3 CD directory sample:
Playback order: song01 v song02 v ...
vsong14
Note:
- Some MP3/WMA CDs cannot be played back
depending on the recording conditions.
- The CD-R/RW that has no music data or non-
MP3/WMA files cannot be played back.
- Do not make an empty folder. It may not work
correctly.
- In this model, recommend recording setting is
128 kbps of fixing bit rate. If files are recorded
in other bit rate (for example: 320 kbps) or in
variable bit rate, track-jump may sometimes
happen according to recording conditions.
albumF01
F01
song01.mp3
song02.mp3
song03.mp3
song04.mp3
song05.mp3
Folder number F01
There is no MP3 file.
The unit skips it.
song06.mp3
song07.mp3
song08.mp3
song09.mp3
song10.mp3
albumF02
song11.mp3
song12.mp3
F02
song13.mp3
song14.mp3
albumF04
F04
albumF03
F03
MP3 CD
MP3/WMA CD OPERATION
There are three basic methods for writing to
a CD: “Track-at-Once”, “Disc-at-Once”, and
“Packet Writing”. Music files recorded by “Track-
at-Once” or “Disc-at-Once” can be played back
on this unit. (Note: The unit cannot play back
the music files added with “Track-at-Once”.) Mu-
sic files recorded by “Packet Writing” cannot be
played back.
575PAEn.indd 18 2006.12.5 11:04:18 AM
19
MP3 CD Play
1. Load the MP3 CD. (See page 16.)
The total number of files of the MP3 CD appears
on the display.
2. Press the PLAY/PAUSE i button to start
playback.
3. Press the MEMORY/FOLDER button,
“FOLDER” blinks on the display, then press
the f
/FILE-
or FILE+/e button (or the
FOLDER- or FOLDER + button on the remote
controller) to select the desired folder.
4. When the first file number of selected folder
appears, press the f
/FILE-
or FILE+/e
button to select a desired file.
5. Press the PLAY/PAUSE i button to start
playback.
6. Press the STOP n button at any time to stop
the playback.
Note:
- If there is no music data, “no” appears.
- Only select the folder in playing mode.
PROGRAMMED PLAY
Up to 32 files on a disc can be programmed for
play in any order.
- To begin the programming procedure, set
FUNCTION switch to “CD/USB” first.
- The same file can be programmed more than
once.
- Load a disc that you want to programme before
starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the “P01”
a n d “ M E M O RY ” a pp e ar b r i e fl y t h en
“ ” appears and “MEMORY” blinks.
3. Select a file by using the f
/FILE-
or FILE+/e
button (or the FOLDER- or FOLDER + button
on the remote control).
4. Press the MEMORY/FOLDER button, the
“P02” and “MEMORY” appear briefly, then
“ ” appears and “MEMORY” blinks.
5. Repeat steps 3-4 to programme additional
tracks.
6. Press the PLAY/PAUSE i button to
start playback. “P01” appears briefly, then
first programmed file appears and “MEMO-
RY” remains lit.
7. Press the STOP n button to stop programme
playback at any time.
To cancel programmed play, press the STOP n
button twice during play.
Checking the programme
In stop mode when MEMORY remains lit, press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.
Changing a programme
To add a new file to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
To change a file:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the file number to
be replaced is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
MP3
MEMORY
MEMORY
MEMORY
MP3
575PAEn.indd 19 2006.12.5 11:04:20 AM
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
