Yamaha TSX-100 取扱説明書

©

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY. LTD.

LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA

야마하 뮤직 코리아 ( 주 )

서울특별시 강남구 삼성동 158-9 동성빌딩 8F/9F

Printed in China

CQX1A1290X

TSX-100

DESKTOP AUDIO SYSTEM

OWNER’S MANUAL

MANUAL DE INSTRUCCIONES

사용 설명서

R

TSX-100_R-cv.fm Page 1 Tuesday, January 8, 2008 10:10 AM

i En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place

with at least 10 cm on the top, 10 cm on the left and right,

and 10 cm at the back of this unit

— away from direct

sunlight, heat sources, vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in an environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto

this unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and

may cause fire, damage to this unit, and/or personal injury.

Yamaha will not be held responsible for any damage

resulting from use of this unit with a voltage other than

specified.

13 To prevent damage by lightning, keep the power cord and

outdoor antennas disconnected from a wall outlet or this unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall

outlet.

16 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

17 Before moving this unit, press POWER OFF to set this unit

to the standby mode, and disconnect the AC power plug from

the wall outlet.

18 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power cable from the

outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become

warm. Turn the power off, then leave this unit alone for

cooling.

20 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

22 Excessive sound pressure from earphones and headphones

can cause hearing loss.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a qualified

service person should remove the cover or attempt to service this

device.

DANGER

This unit emits visible laser radiation when open. Avoid direct

eye exposure to beam. When this unit is plugged into the wall

outlet, do not place your eyes close to the opening of the disc tray

and other openings to look into inside.

Caution: Read this before operating your unit.

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit itself

is turned off by POWER OFF. This state is called the standby

mode. In this state, this unit is designed to consume a very

small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

PRODUIT LASER DE CLASSE 1

1 En

English

PREPARATIONINTRODUCTION

OPERATION

ADDITIONAL

INFORMATION

Features ................................................................... 2

Controls and functions ........................................... 3

Front/top view............................................................ 3

Remote control........................................................... 4

Preparation before using this unit ........................ 6

Turning on the power................................................. 6

Adjusting the clock.................................................... 7

Basic operation........................................................ 8

Selecting the input source.......................................... 8

Adjusting the volume level........................................ 8

Adjusting sounds ....................................................... 9

Useful operations for the display............................. 10

Listening to CDs, MP3/WMA files,

and external sources ......................................... 11

Listening to CDs...................................................... 11

Listening to MP3/WMA files stored

on your USB device ............................................ 12

Switching the playback information display ........... 14

Repeat and random playback................................... 15

Playing back external sources.................................. 15

Listening to FM and AM radio stations ............. 16

Connecting antennas................................................ 16

Tuning radio stations ............................................... 16

Presetting radio stations automatically

(Auto preset)........................................................ 17

Presetting radio stations manually

(Manual preset).................................................... 17

Selecting preset radio stations (Preset tuning)......... 18

Using the timer functions ..................................... 19

Troubleshooting.....................................................21

General..................................................................... 21

Disc playback .......................................................... 21

MP3/WMA file playback ........................................ 22

Radio reception........................................................ 22

Remote control ........................................................ 23

Notes on discs.........................................................24

Disc information ...................................................... 24

Handling a disc ........................................................ 24

Glossary..................................................................25

Specifications .........................................................25

Contents

INTRODUCTION

PREPARATION

OPERATION

ADDITIONAL INFORMATION

FEATURES

2 En

• Stylish compact all-in-one design

• Audio CDs, MP3 CDs, and WMA CDs playable

• USB supported

• Sophisticated FM/AM tuner

• Simple but functional remote control

• Timer and clock function

“Swing Radiator Bass

™

” is a trademark of YAMAHA

CORPORATION.

■ About this manual

• In this manual, operations that can be performed with either this unit or its remote control are explained using the

remote control.

• The symbol “☞ ” with page number(s) indicates the corresponding reference page(s).

• y indicates a tip for your operation.

• Notes contain important information about safety and operating instructions.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of

improvements, etc.

In case of differences between the manual and the product, the product has priority.

■ Supplied accessories

This product includes the following accessories. Make sure you have all of the following parts.

y

Select one of the supplied power cables suitable for the type of AC wall outlet in your location before plugging this unit into the AC wall

outlet.

The form of the supplied accessories varies depending on the models.

Features

ALARM

INPUT

VOLUME

STANDBY/ON

ON/OFF

2134

6578

09

TIMER

TIME/INFO

PRESET

DISPLAY

TONE EQ

SLEEPDIMMER

TIME ADJ

TUNE

RANDOM

REPEAT

/ /

ENTER

CDUSB

TUNER

MUTE

PORTABLE

Indoor FM antenna AM loop antenna

Power cable

Remote control

Note

3 En

English

INTRODUCTION

Controls and functions

Front/top view

POWER OFF

SLEEP

ALARM

MUTE

PRESET

VOLVOL

Starts and pauses playback. (☞ P. 11)

Stops playback or ejects a disc when

playback is stopped. (☞ P. 11)

,

Skips to the beginning of the current or next

track.

Press and hold the key to search backward/

forward. (☞ P. 11)

POWER OFF

Sets this unit to the standby mode. (☞ P. 6)

SLEEP

Sets the sleep timer. (☞ P. 20)

6

7/0

4/1¡/¢

USB port (☞ P. 12)

Speaker

Disc slot (☞ P. 11)

Display

VOL u , d

Adjusts volume level. (☞ P. 8)

MUTE

Turns off the volume. (☞ P. 8)

PRESET u, d

Selects the preset stations. (☞ P. 17)

ALARM

Sets the alarm function. (☞ P. 19)

INPUT/SNOOZE

Turns on this unit and selects an input

source (☞ P. 6, 8), or enables the

snooze function when alarm is

activated. (☞ P. 19)

4 En

Controls and functions

Remote control

ALARM

INPUT

VOLUME

STANDBY/ON

ON/OFF

213

657

09

TIMER

TIME/INFO

PRESET

DISPLAY

TONE EQ

SLEEPDIMMER

TIME ADJ

TUNE

RANDOM REPEAT

//

ENTER

CDUSB

TUNER

MUTE

PORTABLE

4

8

STANDBY/ON

DIMMER

TIME/INFO

RANDOM

INPUT

CDUSB

TUNER

PORTABLE

VOLUME

MUTE

Turns on this unit. (☞ P. 6)

Changes the brightness of the display.

(☞ P. 10)

Displays the disc/USB information.

(☞ P. 14)

Sets this unit to the random playback mode.

(☞ P. 15)

Select the source you want to listen to.

Press PORTABLE to listen to the source played back on the

component which is connected to the PORTABLE jack on

the rear panel of this unit. (☞ P. 15)

Press USB to listen to the source stored in the connected

USB memory. (☞ P. 12)

Press TUNER to listen to FM/AM radio broadcast. Each

time you press TUNER, the source switches between FM

and AM. (☞ P. 16)

Press CD to listen to a disc inserted into the disc slot.

(☞ P. 11)

Adjust volume. (☞ P. 8)

Infrared signal

transmitter

Cursor (S/T/W/X) and ENTER

Remove the insulation sheet

before using the remote control.

y

Remove the transparent sheet before using the remote

control.

5 En

Controls and functions

English

INTRODUCTION

ALARM

ON/OFF

TIMERSLEEP

TIME ADJ

1

65

3

7

09

4

8

2

TONE EQ

DISPLAY

REPEAT

/ /

Set various timer and clock function.

ALARM ON/OFF: Activates or cancels the alarm function. (☞ P. 19)

TIME ADJ: Adjusts the clock of this unit. (☞ P. 7)

SLEEP: Sets the sleep timer. (☞ P. 20)

TIMER: Sets the countdown timer. (☞ P. 20)

Select the desired track or preset station directly. (

☞

P. 11, 13, 17, 18)

Adjust the sound.

TONE: Adjusts the bass and treble balance. (☞ P. 9)

EQ: Selects the equalizer mode. (☞ P. 9)

Control playback.

, : Skips to the beginning of the current or next track.

Press and hold the key to search backward/forward. (☞ P. 11, 12)

: Starts and pauses playback. (☞ P. 11, 12)

: Stops playback or ejects a disc when playback is stopped. (☞ P. 11, 12)

4¢

6

7/0

Sets this unit to the repeat playback mode. (☞ P. 15)

Changes the displayed information. (☞ P. 10)

■ Using the remote control

30˚ 30˚

Within 6 m

Use the remote control within 6 m of this unit and point it

toward the remote control sensor.

• Do not put obstacles between the sensor of this unit and the remote control. Doing

so, you cannot operate this unit by the remote control.

• Do not spill liquid on the remote control.

• Do not drop the remote control.

• Do not leave the remote control in the following places:

– hot or humid places such as bathroom or near a heater

– extremely cold places

– dusty places

For replacement of the battery ☞ P. 23.

Notes

PREPARATION BEFORE USING THIS UNIT

6 En

y

Select one of the supplied power cables suitable for the type of AC wall outlet in your location before plugging this unit into the AC wall

outlet.

Preparation before using this unit

Turning on the power

STANDBY/ON

Turn on this unit.

Press again to set this unit to the standby mode.

y

• During the standby mode, the power consumption is reduced.

• In the standby mode, you can select whether to display the date and time (in the ECO OFF

mode) or not to display them (in the ECO ON mode).

1 While in the standby mode, press and hold the MUTE on the top panel.

J The “ECO ON” or “ECO OFF” flashes.

2 While the indicator is flashing, press the MUTE to select “ECO ON” or “ECO OFF”.

3 Wait several seconds.

J The mode is set to ECO ON or ECO OFF.

• The memory back-up circuit prevents the stored data from being lost even if this unit is in

the standby mode. However, the stored data will be lost if the power cable is disconnected

from the AC wall outlet or if the power supply is cut off for more than one week.

On the top panel

You can also perform the above operations on the top panel.

INPUT/SNOOZE

POWER OFF

SLEEP

Turn on this unit.

Set this unit to

the standby mode.

(Not displayed)

ECO ON mode

11:22PM

12 Oct Fri

ECO OFF mode

(Date and time displayed)

Display in

the

standby

mode

Connect the power cable to the AC inlet of this unit

and an AC wall outlet.

1 To AC inlet

2 To an AC wall outlet

STANDBY/ON

Preparation before using this unit

7 En

English

PREPARATION

Adjusting the clock

PRESET

TUNE ENTER

TIME ADJ

PRESET

TUNE ENTER

PRESET

TUNE ENTER

Year

2007

Adjust date and time.

W/X

Selects year/day/month/hour/minute.

S/T

Increases or decreases the date or time.

Date

12 Oct Fri

Time

1:23AM

Examples

Confirm.

When the display is off, turn on the power

before making this setting.

Note

y

You can switch the 12-hour notation to 24-hour notation (The default setting is 12-hour

notation).

1 Turn on the power.

2 Press both PRESET u and SLEEP on the top panel.

3 Press W/X on the remote control repeatedly to select TIME display.

4 Press S/T on the remote control to select desired notation.

TIME 12H:12-hour notation

TIME 24H:24-hour notation

5 Press ENTER on the remote control to confirm.

Basic operation

8 En

■ Using the headphones

y

Even when you connect your headphones, the alarm sound is

output through the speaker.

Basic operation

Selecting the input source

On the top panel

INPUT

CDUSB

TUNER

PORTABLE

To listen to music played on a

portable audio device

To listen to MP3/WMA files

stored on your USB device

To listen to radio stations

(FM/AM)

To listen to a CD

PORTABLE

USB

TUNER

CD

INPUT/SNOOZE

Press repeatedly.

Adjusting the volume level

On the top panel

VOLUME

MUTE

To increase or decrease

the volume level

y

If the power is turned off with the

volume set to a level of 41 or more, the

volume level is automatically set to 20

when the power is turned back on.

To turn off the sound

y

Press again to resume the volume level.

VOLUME

Volume 41 20

MUTE

ALARM

MUTE

PRESET

VOLVOL

Decreases the

volume level.

Turns off the sound.

Increases the

volume level.

TUNER

PHONES

PORTABLE

FM ANT

75

UNBAL.

To PHONES

Basic operation

9 En

English

OPERATION

Adjusting sounds

ENTER

TONE EQ

PRESET

TUNE ENTER

EQ

PRESET

TUNE ENTER

TONE

BASS 0

BASS +02

Press repeatedly.

ROCK

POP

JAZZ

CLASSIC

STRAIGHT

For rock music

For popular music

For jazz

For classical music

For various music

Select “BASS” (low frequency range)

or “TREBLE” (high frequency range).

Adjust the level (–10 to +10 dB).

■ Adjusting bass/treble balance

■ Adjusting the total sound balance

Press repeatedly.

Confirm.

Basic operation

10 En

Useful operations for the display

DISPLAY

Time and playback status

Date

Alarm 2 setting (☞ P. 19)

Sleep timer setting (☞ P. 20)

Alarm 1 setting (☞ P. 19)

Countdown timer (only when activated) (☞ P. 20)

Press repeatedly.

■ Switching the display information

Input

DIMMER

100%

50%

30%

■ Dimming the display

Press repeatedly.

Bright

Mid dim

Dim

DISPLAY

DIMMER

Listening to CDs, MP3/WMA files, and external sources

11 En

English

OPERATION

■ To pause playback

y

To cancel pause, press again.

■ To skip tracks

■ To search backward/

forward

No sound is heard when you search

during pause.

■ To specify a track

y

Enter the track number you want to listen

to.

■ To stop playback

■ To eject a disc

Listening to CDs, MP3/WMA files, and external sources

Listening to CDs

/ /

CD

2134

6578

09

CD

1:23PM

T001 00:01

Elapsed

time

Current

track

Status

indicator

Insert your disc.

y

You can also play back MP3/WMA files recorded on a disc. For operation instruction,

refer to “Listening to MP3/WMA files stored on your USB device” (☞ P. 12).

1:23PM

T014 60:59

Total time of

the disc

Total

tracks

Status

indicator

y

• You can switch the playback information display (☞ P. 14).

• You can also play back MP3/WMA files recorded on a disc. Refer to “Listening to

MP3/WMA files stored on your USB device” (☞ P. 12).

When the playback is

stopped

Playback starts.

On the top panel

POWER OFF

SLEEP

Playback/Pause

Skip forward/

Search forward*

* Press and hold while in playback

or pause.

Stop/Eject*

Skip backward/

Search backward*

Note

/

6

Backward

Forward

Backward

Forward

Press and hold.

2134

6578

0

9

/

While playback

is stopped

While in playback

or pause

Press.

/

Press and

hold.

Listening to CDs, MP3/WMA files, and external sources

12 En

■ To stop playback

■ To pause playback

y

To cancel pause, press again.

■ To skip tracks

■ To search backward/

forward

Pause will be canceled when you start

searching.

Listening to MP3/WMA files stored on your USB device

PRESET

TUNE

/

ENTER

USB

2134

6578

09

USB

Connect a USB device.

This unit supports USB mass storage class devices (e.g., flash memories or

portable audio players) using FAT16 or FAT32 format.

• Some devices may not work properly even if they meet the requirements.

• Do not connect devices other than USB mass storage class devices (such as USB

chargers or USB hubs), PCs, card readers, external HDD, etc.

• Yamaha will not be held responsible for any damage to or data loss on the USB device

occurring while the device is connected to this unit.

• Playability of and power supply to all kind of USB devices are not guaranteed.

Notes

1:23PM

Road to Ind

Song title/artist name/album name

Playback starts.

y

You can switch the playback information display (☞ P. 14).

The reading time may exceed 30 seconds depending on the number of files/folders.

Note

On the top panel

POWER OFF

SLEEP

Playback/Pause

Skip forward/

Search forward*

Stop

Skip backward/

Search backward*

* Press and hold

/

6

Note

Backward

Forward

Backward

Forward

Press and hold.

Listening to CDs, MP3/WMA files, and external sources

13 En

English

OPERATION

■ To specify a track for playback

y

Enter the track number you want to listen to.

• Depending on the conditions of recording such as software

recording setting, this unit may not be able to play a disc or

USB device in the order of recording.

• For an MP3 or WMA disc/USB device, the number assigned to

each file corresponds to the file sequence in the disc/USB

device, not in the individual folders.

■ To select a folder/file for an MP3 or WMA

format file

• This unit can display up to 255 files and 255 folders. However,

less than 255 files/folders may be displayed if some files/folders

are not playable on this unit.

• If the USB device is partitioned, only the first partition is

displayed.

• Some files may not work properly depending on the USB

device specification.

• Copyright-protected files cannot be played back.

• This unit can play back files of 4 GB in size or less.

Notes

2134

6578

0

9

PRESET

TUNE ENTER

PRESET

TUNE ENTER

PRESET

TUNE ENTER

PRESET

TUNE ENTER

Select a folder.

Only when MP3/WMA disc playback

Select a file.

Start playback.

About MP3 or WMA files

You can play back MP3 or WMA files recorded on your CD-

R, CD-RW, or USB device. This unit regards folders in a disc/

USB device as albums, and files as tracks as shown below.

Folder hierarchy is disregarded.

Notes

Root

Folder (Album)

File (Track)

Listening to CDs, MP3/WMA files, and external sources

14 En

Each time you press the key, the information display

changes.

Some special characters may not be shown properly.

■ Audio CDs

Elapsed time of the current track (Default)

Remaining time of the current track

Total time of the disc

Remaining time of the disc

Back to the default display

■ MP3/WMA files

Scrolling display* (Default)

Elapsed time of the current file

Remaining time of the current file

File name

Song title

Artist name

Album name

Year

Comment

Back to the default display

*

Scrolling display shows the song title, artist name, and album

name of the selected item in sequence.

Switching the playback information display

Note

TIME/INFO

DIMMER

TIME/INFO

Press repeatedly.

1:23PM

T014 02:21

T014-03:41

TTL 54:41

TTL -12:28

1:23PM

to order-Fr

T014 02:21

T014-03:41

Road-to-ind

Road to Ind

Frankie Zip

Made to ord

2007

Live at KCE

Listening to CDs, MP3/WMA files, and external sources

15 En

English

OPERATION

Repeat and random play modes are canceled when the playback

is stopped or the disc/USB device is removed.

Turn down the volume of this unit and your portable audio device

before connection.

y

For operations of the portable audio device, refer to the

instruction manual of the device.

Repeat and random playback

Note

RANDOM REPEAT

■ Random playback

■ Repeat playback

RANDOM

Rd

Press repeatedly.

Normal playback

(Random playback)

REPEAT

Press repeatedly.

R1

Rf

Ra

(Full repeat)

Normal playback

(Single repeat)

(Folder repeat, MP3/WMA disc/USB only)

Playing back external sources

Note

TUNER

PHONES

PORTABLE

FM ANT

GND

AM ANT

75

UNBAL.

PORTABLE

Portable audio

device

PORTABLE

3.5 mm mini plug

Start playback on the

connected portable

audio device.

Connect your portable audio device.

Listening to FM and AM radio stations

16 En

y

• While listening to the AM radio station, rotate the antenna head

to find the best angle for reception.

• You can also tune radio stations manually by pressing TUNE

W/X repeatedly.

• To increase the quality of the FM sound under the weak radio

wave, press and hold RANDOM on the remote control to

change the FM radio wave reception mode of this unit to the

monaural mode.

■ To switch the frequency step

Because the interstation frequency spacing differs in

different areas, you may need to switch the frequency step

mode. The default step setting is AM 9 kHz/FM 50 kHz.

Switching frequency step

1 Turn on the power.

2 Press both PRESET u and SLEEP on the top panel.

3 Press W/X on the remote control repeatedly to select

TUNER display.

4 Press S/T on the remote control to select desired frequency

step.

TUNER 10/100:AM 10 kHz/FM 100 kHz step

TUNER 9/50:AM 9 kHz/FM 50 kHz step

5 Press ENTER on the remote control to confirm.

y

The frequency step in North, Central and South America is AM

10 kHz/FM 100 kHz.

Listening to FM and AM radio stations

Connecting antennas

TUNER

FM ANT

GND

AM ANT

75

UNBAL.

1

2

3

Indoor FM

antenna

(supplied)

AM loop antenna (supplied)

Ground

(GND terminal)

The wire of the AM loop antenna is shield type. Connect the

white wire to AM ANT terminal and connect the black wire to

GND terminal.

Note

About grounding

For the maximum safety and minimum interference, connect

the antenna GND terminal to a good earth ground. A good

earth ground is a metal stake driven into the moist earth.

12 3

The cable of AM loop

antenna

Tuning radio stations

TUNE

RANDOM

TUNER

PRESET

TUNE ENTER

Press and hold.

Select FM or AM.

FM

87.50MHz

FM

89.70MHz

Listening to FM and AM radio stations

17 En

English

OPERATION

After switching to the preset setting display (while part of

the display is flashing), perform this operation while it is

still flashing.

y

• You can delete a preset station by pressing .

• You can delete all the preset stations by pressing and holding

for 3 seconds or longer.

After switching to the preset setting display (while part of

the display is flashing), perform this operation while it is

still flashing.

y

• You can preset up to 30 FM stations and 20 AM stations.

• You can delete a preset station by pressing .

• You can delete all the preset stations by pressing and holding

for 3 seconds or longer.

Presetting radio stations

automatically (Auto preset)

TUNER

/

PRESET

TUNE ENTER

/

ENTER

TUNER

FM

87.50MHz

Press and hold.

Select FM or AM.

Press and hold.

FM

01 87.50MHz

FM

COMPLETE

Enter the

preset mode.

When finished

7/0

Presetting radio stations

manually (Manual preset)

PRESET

TUNE ENTER

PRESET

ENTER

FM

89.70MHz

PRESET

TUNE ENTER

Tune into a favorite

radio station (☞ P.

Enter the

preset mode.

FM

01 89.70MHz

FM

04 89.70MHz

Select the

desired preset

number.

y

You can also use the

numeric buttons to select

the preset number.

PRESET

TUNE ENTER

Confirm.

Press and hold.

7/0

Listening to FM and AM radio stations

18 En

Selecting preset radio stations

(Preset tuning)

On the top panel

PRESET

TUNER

PRESET

TUNE ENTER

FM

30 108.00MHz

TUNER

FM

87.50MHz01

Select FM or AM.

Select the

preset radio

station.

y

You can also use the

numeric buttons to

select the station.

ALARM

MUTE

PRESET

VOLVOL

ページが読み込まれています...

Yamaha TSX-100 取扱説明書

Yamaha TSX-100 取扱説明書

他の言語で

関連論文

その他のドキュメント