Sony MV-101 取扱説明書

ブランド: Sony

モデル: MV-101

カテゴリー: DVDプレーヤー

タイプ: 取扱説明書

MV-101

For installation and connections, see the supplied installation/connections manual.

3-255-983-61 (1)

DVD Player

Operating Instructions

Welcome !

Thank you for purchasing this Sony DVD

Player. You can enjoy its various features even

more with:

•DVD/Video CD/Audio CD playback.

•Support DTS/Dolby digital through optical

digital output terminal.

•MP3 file playback.

•Supplied controller accessory

Card remote commander

RM-X135

Copyrights

This product incorporates copyright protection

technology that is protected by method claims

of certain U.S. patents, other intellectual

property rights owned by Macrovision

Corporation, and other rights owners. Use of

this copyright protection technology must be

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and the

double-D symbol are trademarks of Dolby

Laboratories.

“DTS,” “DTS Digital Surround” and “DTS

Digital Out” are trademarks of Digital Theater

Systems, Inc.

Warning

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

This label is located on the bottom of the

chassis.

CAUTION INVISIBLE

DO NOT STARE INTO BEAM OR

VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

LASER RADIATION WHEN OPEN

This label is located on the drive unit’s internal

chassis.

Table of Contents

Precautions ............................................................ 4

About this manual ............................................... 4

About discs this player can play ........................ 5

Notes on discs ....................................................... 7

About MP3 files .................................................... 8

Location of controls ........................................... 10

Getting Started

Resetting the player ........................................... 12

DVD/Video CD/CD Player

Playing a disc ...................................................... 13

Searching a chapter/title/track directly ..........14

Resume playback .................................................14

Turning off this player......................................... 14

MP3 file playback with the menu display .......15

Displaying running time ................................... 15

Changing the subtitle language ....................... 16

Using a DVD menu ............................................ 17

Using the TOP MENU button ............................17

Using the MENU button ..................................... 17

Changing the audio language .......................... 18

Changing angles ................................................. 18

Changing the audio output .............................. 19

Using the PBC (playback control) function .... 19

Changing Setup

Displaying the multi-angle notice

— ANGLE MARK ........................................ 20

Displaying captions for viewers with hearing

difficulties

— CAPTIONS ............................................... 21

Setting the screen saver

— SCR SAVER ............................................... 22

Selecting the speaker mode

— SPEAKER SETUP..................................... 22

Selecting the audio output mode

— AUDIO OUT ............................................. 23

Selecting the compression setting for the sound

— DYNAMIC ................................................ 23

Selecting the TV colour system

— COLOR SYSTEM ..................................... 24

Selecting the audio language for DVD

— AUDIO ...................................................... 24

Displaying the subtitles for DVD

— SUBTITLE ................................................. 25

Selecting the DVD menu language

— DISC MENU ............................................. 25

Preparing for the initial parental setting ........ 26

Setting the password ........................................... 26

Selecting the desired parental setting

— PARENTAL ................................................ 26

Changing your password

— PASSWORD ............................................... 27

Returning this player to the factory setting

— DEFAULTS ................................................ 28

Setting the menu display for MP3 files

— SMART NAVI ........................................... 28

Additional Information

Maintenance........................................................ 29

Specifications ...................................................... 30

Troubleshooting.................................................. 31

Error display ....................................................... 33

Language Code List ........................................... 34

Precautions

To avoid the risk of injury or accident, read the

following precautions before installing and

operating the player.

For driver's safety

Comply with your local traffic rules and

regulations.

•While driving

— The driver must not watch or operate the

player. It may lead to distraction and

cause an accident. Park your car in a safe

place to watch and operate the player.

•While operating

— Do not insert your hands, fingers or

foreign object into the player. It may cause

injury or damage to the player.

— Keep small articles out of the reach of

children.

•If the player does not work, check the

connections first. If everything is in order,

check the fuse.

•If your car was parked in direct sunlight,

allow the player to cool off before operating

it.

•Avoid installing the player in places:

— subject to temperature below – 30 °C or

above 65 °C.

— subject to direct sunlight.

— near heat sources (such as heaters).

— exposed to rain or moisture.

— exposed to excessive dust or dirt.

— subject to excessive vibration.

— subject to heat:

Keep all products away from nearby hot

vehicle components that heat up over

time such as hoses, high current wires,

and braking systems components. Make

sure to leave enough room for ventilation

on openings and slots to protect from over

heating.

If you have any questions or problems

concerning this player, please consult your

nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area,

moisture condensation may occur inside the

lenses. Should this occur, the player will not

operate properly. In such a case, remove the

disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft

drinks onto the player or discs.

About this manual

Conventions

•Instructions in this manual describe how to

use this player by using the controls on the

supplied wireless remote commander.

•The icons below are used in this manual:

Icon Meaning

Indicates a DVD function.

Indicates a Video CD function.

Indicates an Audio CD function.

Indicates the function of a CD

containing MP3 file.

About discs this player can

play

This player can play 12 cm disc only.

•DVD

•Video CD

•Audio CD

•CD-R/CD-RW

Disc type Label on the disc

DVD Videos

Video CDs

Audio CDs

MP3 files

Notes on CD-Rs (recordable CDs)/

CD-RWs (rewritable CDs)

•Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this

unit.

•You cannot play a CD-R/CD-RW that is not

finalized*.

•You can play MP3 files recorded on CD-

ROMs, CD-Rs, and CD-RWs.

* A process necessary for a recorded CD-R/CD-RW

disc to be played on the audio CD player.

Region code of DVDs this player

can play

This player has a region code printed on the

rear of the player and will only play DVDs that

are labelled with identical region codes. DVDs

labelled

ALL

will also be played on this player.

If you try to play any other DVD, the message

“WRONG REGION” will appear on the screen.

Depending on the DVD, the region code

indication may not appear even if the DVD is

prohibited by area restrictions.

Cautions

• This player CANNOT play these discs.

— DVD-Audio — DVD-RAM

— DVD-ROM — DVD-RW

— DVD-R — Active-Audio (Data)

— Photo-CD — VSD

— CD-Extra (Data)

— Mixed CD (Data)

— CD-ROM (the data other than the MP3 file)

— a disc recorded in Multi Session

• This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual

property rights owned by Macrovision

Corporation and other rights owners. Use of this

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

MODEL NO.

DVD PLAYER

DC:12

PA L

Region

code

continue to next page t

Note on PBC (Playback Control) (Video CDs)

This player conforms to Ver. 1.1 and Ver. 2.0 of

Video CD standards. You can enjoy two kinds

of playback according to the disc type.

Disc type

Video CDs without

PBC functions

(Ver. 1.1 discs)

Video CDs with

PBC functions

(Ver. 2.0 discs)

Note on DTS-encoded CDs

When playing DTS*-encoded CDs, excessive

noise will be heard from the analog stereo

outputs. To avoid possible damage to the

audio system, the consumer should take

proper precautions when the analogue stereo

outputs of this player is connected to an

amplification system. To enjoy DTS Digital

Surround™ playback, an external 5.1-channel

DTS Digital Surround™ decoder system must

be connected to the digital output of this

player.

* “DTS,” “DTS Digital Surround” and “DTS Digital

Out” are trademarks of Digital Theater Systems,

Inc.

Terms for discs

DVD structure

Video CD/Audio CD structure

• Title

The longest section of a picture or music

feature on a DVD, e.g., a movie for video

software, or an album for audio software, etc.

• Chapter

Sections of a picture or a music feature that are

smaller than titles. A title is composed of

several chapters. Each chapter is assigned a

chapter number enabling you to locate the

chapter you want. Depending on the disc,

chapters may not be recorded.

• Track

Sections of a picture or a music feature on a

Video CD/Audio CD. Each track is assigned

a track number enabling you to locate the

track you want.

• Scene

On a Video CD with PBC (playback control)

functions, the menu screens, moving pictures

and still pictures are divided into sections

called “scenes.” Each scene is assigned a scene

number enabling you to locate the scene you

want.

Disc

Title

Chapter

Disc

Track

You can

Video playback (moving

pictures) as well as music.

• Interactive software

with menu screens

displayed on the

monitor

(PBC Playback).

• Video playback

functions.

• High-resolution still

pictures if they are

included on the disc.

•You cannot play 8 cm CDs.

•Before playing, clean the discs with a

commercially available cleaning cloth. Wipe

each disc from the centre out. Do not use

solvents such as benzine, thinner,

commercially available cleaners, or antistatic

spray intended for analog discs.

Music discs encoded with copyright

protection

This product is designed to play back discs

that conform to the Compact Disc (CD)

standard. Recently, various music discs

encoded with copyright protection are

marketed by some record companies. Please be

aware that among those discs, there are some

that do not conform to the CD standard and

may not be playable by this product.

Notes on discs

•To keep the disc clean, do not touch the

surface. Handle the disc by its edge.

•Keep your discs in their cases or disc

magazines when not in use. Do not subject

the discs to heat/high temperature. Avoid

leaving them in parked cars or on

dashboards/rear trays.

•Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may

ruin the disc.

•Do not use any discs with labels or stickers

attached.

The following malfunctions may result from

using such discs:

— Inability to eject a disc (due to a label or

sticker peeling off and jamming the eject

mechanism).

— Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to

heat shrinking of a sticker or label causing

a disc to warp.

•Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit.

Do not use such discs.

Notes

• With formats other than ISO 9660 level 1 and

level 2, folder names or file names may not be

displayed correctly.

• When naming, be sure to add the file extension

“.MP3” to the file name.

• If you put the extension “.MP3” to a file other

than MP3, the player cannot recognize the file

properly and will generate random noise that

could damage your speakers.

• The following discs take a longer time to start

playback.

—a disc recorded with complicated tree

structure.

—a disc to which data can be added.

• If you play a high-bit rate MP3 file such as 320

kbps, sound may be intermittent.

About MP3 files

MP3 (MPEG 1 Audio Layer-3) is a standard

technology and format for compressing a

sound sequence. The file is compressed to

about 1/10 of its original size. Sounds outside

the range of human hearing are compressed

while the sounds we can hear are not

compressed.

Recommended MP3 file format

Sampling frequency 32k, 44.1k, 48k

(Hz)

Bitrate (bps) 32k to 256k

Notes on discs

You can play MP3 files recorded on CD-ROMs,

CD-Rs, and CD-RWs.

The disc must be in the ISO 9660* level 1 or

level 2 format, or Joliet or Romeo in the

expansion format.

* ISO 9660 Format

The most common international standard

for the logical format of files and folders on

a CD-ROM.

There are several specification levels. In

Level 1, file names must be in the 8.3 format

(no more than 8 characters in the name, no

more than 3 characters in the extension

“.MP3”) and in capital letters. Folder names

can be no longer than 8 characters. There can

be no more than 8 nested folder levels. Level

2 specifications allow file names up to 31

characters long.

Each folder can have up to 8 trees.

For Joliet or Romeo in the expansion format,

make sure of the contents of the writing

software, etc.

Folder

(album)

MP3 file

(track)

The playback order of the MP3 files

The playback order of the folders and files is as

follows:

Tree 1 Tree 2 Tree 3 Tree 4 Tree 5

(root)

Tip

To specify a desired playback order, before the

folder or file name, input the order by number

(e.g., “01,” “02”), then record contents onto a disc

(The order differs depending on the writing

software).

Location of controls

1 POWER (on/off) button*

To turn on/off the player, press and hold

the POWER button until the green light of

the button is turned on/off.

2 DISC IN light

When a disc is in the player, the DISC IN

light glows orange.

3 Receptor for the card remote

commander

4 u (play/pause) button 13

5 x (stop) button 13

6 Disc slot

7 Z (eject) button 13

Available to eject a disc from the player

even when the player is turned off.

8 RESET button 12

9 > (next) button 13

q; . (previous) button 13

Refer to the pages listed for details.

DISC IN

POWER

MV-101

POWER

DISC IN

RESET

MV-101

* Warning when installing in a car

without an ACC (accessory) position

on the ignition key switch

Be sure to press and hold the POWER

button (1) on the player until the green

light of the button is turned off.

Otherwise, the player is not turned off and

this causes battery drain.

Note

Even when the player is turned off, you can eject a

disc from the player, though you cannot insert a

disc.

Card remote commander RM-X135

Refer to the pages listed for details.

1 DISPLAY button 15

To display a running time.

2 Number buttons 19

3 TOP MENU button 17, 19

To display the top menu of a recorded

DVD or to turn on/off the PBC (Playback

control) menu of a Video CD.

4 MENU button 17

To display the recorded DVD menu.

5 O (return) button 19

6 ./> (previous/next) buttons

7 /m (fast/slow reverse)/

M/y (fast/slow forward) buttons

8 M/,/m/< buttons

9 POWER (on/off) button 13

For details, refer to “Cautions about the

POWER (on/off) button (9).”

q; SEARCH button 14

To specify a desired point on a disc by

chapter, title, or track.

qa CLEAR button

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

7 890

VOL

qs SUBTITLE button 16

To change the subtitle language while

playing a DVD.

qd ENTER button

To enter a setting.

qf ANGLE button 18

To select the multiple angles of view while

playing or pausing a DVD.

qg AUDIO button 18, 19

To change the audio output/audio

language.

qh SETUP button 20

To enter or quit the setup menu.

qj u (play/pause) button

qk x (stop) button

ql MONITOR POWER (on/off) button*

To turn on/off the monitor.

w; INPUT button*

To select the input source.

wa VOL (–/+) buttons*

To turn up or down the volume.

* These buttons work for optional Sony monitors

other than XVM-R75 and XVM-H6.

The corresponding buttons of the card

remote commander control the same

functions as those on the player.

Instructions in this manual describe how to use

the player by mainly using the card remote

commander.

Tip

Refer to “Replacing the lithium battery” for details

on how to replace the battery (page 29).

Cautions about the POWER (on/off) button (9)

• To turn off the player, press and hold the POWER

button for more than 2 seconds. The player is

completely turned off. If your car has no ACC

position, make sure that the green light of the

POWER button (1) on the player (page 10) is

turned off. Otherwise it may cause battery drain.

• To turn on the player again, be sure to press and

hold the POWER button (1) (page 10) on the

player until the green light of the button is

turned on.

Getting Started

Resetting the player

Before operating the player for the first time,

or after replacing the car battery, or after

changing the connections, you must reset the

player.

Open the front panel and press the RESET

button with a pointed object, such as a

ballpoint pen.

RESET button

DVD/Video CD/

CD Player

This chapter describes how to play a disc.

Playing a disc

1 Press (POWER) to turn on the player.

2 Open the front panel.

3 Insert the disc (labelled side up or the

surface you want to play down if the

disc is a DVD).

If a disc is already inserted, press u to start

playback.

Note

Even when the player is turned off, you can eject a

disc from the player, though you cannot insert a

disc.

To Do this

Stop playback Press x*

Eject the disc Open the front panel,

then press Z on the

player.

Pause Press u *

Resume playback Press u

after pause

Go to the next chapter, Press >

track, or scene in

continuous play mode

Go back to the preceding Press .

chapter, track, or scene in

continuous play mode

Fast forward Press M/y while

playing*

Fast reverse Press /m while

playing*

Slow forward Press M/y in

(DVD/Video CD only) pause*

Slow reverse Press /m in

(DVD only) pause

If the resume playback function is activated, you

can resume playback later by pressing u. For

details, see “Resume playback.”

DVD/Video CD

Both the picture and sound stop during pause

and “PAUSE” is displayed on the screen.

Audio CD

The sound stops and “PAUSE” is displayed on

the screen.

DVD/Video CD/Audio CD

Playback increases to 4 times the speed with

no sound.

A disc other than a DVD returns to normal

playback when a track/MP3 file finishes.

Notes

• Depending on the recording method used on the

disc, it may take a minute or more before

playing.

• Depending on the condition of the disc, it may

not play back (page 7).

• If you play a high-bit rate MP3 file such as 320

kbps, sound may be intermittent.

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

7890

VOL

./>

POWER

M/m

</,

m/M

Number

buttons

continue to next page t

Turning off this player

Press (POWER) to turn off this player.

Searching a chapter/title/track

directly

1 During playback or pause, press

(SEARCH) to display the search screen.

•DVD

Each time you press (SEARCH), the

search screen toggles between Title and

Chapter.

•Video CD (only when PBC is off)/Audio

The track search screen appears.

2 Press the number buttons to enter the

desired chapter/title/track number.

3 Press (ENTER).

Note

You cannot set “0.”

Resume playback

1 During playback, press x to stop.

The player memorizes the point where

playback is stopped.

• DVD/Video CD/Audio CD

“PRESS PLAY TO CONTINUE” flashes

on the screen.

2 Press u to start playback.

When resume playback is activated,

playback starts from the point where

playback is stopped. When resume

playback is deactivated, playback starts

from the beginning.

•MP3

When resume playback is activated,

playback starts from the beginning of the

MP3 file (track) during which you

stopped playback.

Notes

• To deactivate the resume function, press x again

while playback is stopped or eject the disc from

the player.

• The player stores the point where you stopped

playback for the disc currently in the player.

• The resume function will be deactivated when

the disc is ejected.

• If the resume function is activated during fast/

slow forward or fast/slow reverse playback,

normal playback starts when you press u.

Displaying running time

You can display the running time of DVDs,

Video CDs and Audio CDs.

During playback, press (DISPLAY).

The running time is displayed at the upper

left.

• DVD

1 Press (DISPLAY) while the running

time is displayed.

2 Each time you press (DISPLAY), the

display changes as follows:

The format of the sound source (Dolby D,

DTS, or LPCM) may appear.

To exit the display for running time, press

(DISPLAY) repeatedly to select “OFF.”

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

789

VOL

DISPLAY

MP3 file playback with the

menu display

If you have set “SMART NAVI” to “WITH

MENU” (page 28) and play a CD containing

MP3 files, the menu display for folder names

and MP3 file names will appear. You can

easily search the desired MP3 file with the

“SMART NAVI” menu display.

1 Insert a CD containing MP3 files in this

player.

The “SMART NAVI” menu display appears.

2 Press the number buttons to select the

desired folder.

M/,/m/< buttons are also available to

select the desired folder.

If you select the folder 1, the MP3 file

names in the folder 1 appear.

3 Press the number buttons to select the

desired MP3 file.

M/,/m/< buttons are also available to

select the desired MP3 file.

Playback starts.

To turn off the menu display for MP3 files, set

“SMART NAVI” to “NO MENU” (page 28).

Notes

• To deactivate the resume function, press x again

while playback is stopped or eject the disc from

the player.

• While playing back, you cannot change a folder

or file with the “SMART NAVI” menu display.

Only the file in the selected folder can be

changed with the ./> button. To change

the folder, select from the “SMART NAVI” menu

display while playback is stopped (resume

playback is deactivated).

SMART NAVI

ROOT

FOLDER 1

FOLDER 2

FOLDER 3

ROOT

SMART NAVI

_ _

SCHUBERT

BACH

MOZART

CHOPIN

BRAHMS

ROOT

FOLDER 1

FOLDER 2

FOLDER 3

TITLE 01/01 CHAPTER 02/05

00:24:50

Dolby D*

TITLE REMAIN

01:25:41

Dolby D*

CHAPTER ELAPSED

00:01:48

Dolby D*

CHAPTER REMAIN

00:03:26

Dolby D*

OFF

continue to next page t

Changing the subtitle

language

Some DVDs have recorded subtitles in one or

more languages. You can turn the subtitles on

or off, or change the subtitle language on such

DVDs.

Press (SUBTITLE), during playback.

The subtitle language is displayed at the

upper left.

Example: a subtitle language display

Each time you press (SUBTITLE), the

language switches within the list of subtitle

languages recorded on the disc.

When the display for the language code

appears, input the language code

corresponding to the desired language

(page 34).

Notes

• You can also change the subtitle languages by

changing Setup*.

See “Displaying the subtitles

for DVD — SUBTITLE” (page 25).

You can change to a specific subtitle language

using a setup menu, only if the language is

included in both the disc and the setup screen.

• If you want to hide the subtitles, press

(SUBTITLE) repeatedly to select “OFF.”

• This function varies or may not work, depending

on the DVD.

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

789

VOL

SUBTITLE

• Video CD/CD

1 Press (DISPLAY) while the running

time is displayed.

2 Each time you press (DISPLAY), the

display changes as follows:

To exit the display for running time, press

(DISPLAY) repeatedly to select “OFF.”

SUBTITLE 02/32 : ENGLISH

SINGLE ELAPSED

00:00:12

SINGLE REMAIN

00:04:45

TOTAL ELAPSED

00:06:32

TOTAL REMAIN

00:41:15

OFF

Using a DVD menu

With some DVDs you can use the original

menu such as Title menu and DVD menu. You

can play your favorite scene or song by

selecting titles of songs and scenes during a

DVD playback. You can select an item, subtitle

language, audio language etc. by selecting a

DVD menu. The contents of title menus and

DVD menus differ, depending on the DVD.

There may be some DVDs which have no

recorded menus.

Using the TOP MENU button

Some DVDs have a title menu. From the title

menu you can select a title for playback. Titles

are the longest sections of a picture or music

feature on a DVD, e.g., a movie, or an album

for audio software, etc. The TOP MENU

button is available to display the initial menu

screen.

1 During DVD playback, press (TOP MENU).

The top menu* (titles) is displayed.

The contents of the top menu differ,

depending on the DVD.

2 Press M/,/m/< to select the desired

title.

3 Press (ENTER).

The title you selected starts to play.

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

7890

VOL

TOP MENU

ENTER

M/m

</,

Using the MENU button

Some DVDs have more comprehensive Menu

that includes such things as the audio

languages, subtitle languages, titles, and

chapters, etc.

1 During a DVD playback, press (MENU).

The DVD menu is displayed.

2 Press M/,/m/< to select the desired

item.

3 Press (ENTER)*.

If additional selection screens appear, repeat

step 2 and 3.

Notes

• Some DVDs do not have a DVD menu and on

some DVDs, the contents of the DVD menu and

title menu are the same.

• On some DVDs, “DVD Menu” may be expressed

as “MENU.”

• Some DVDs, “Press ENTER” may be expressed as

“Press SELECT” in step 3.

• The contents of the DVD menu differ, depending

on the DVD.

• Read the instruction manual supplied with a

DVD.

Changing angles

Some DVDs have multiple alternative angles

recorded for certain scenes. If you have set

“ANGLE MARK” to “ON” (page 20), a notice

appears for 3 seconds at the scene. If “ANGLE

MARK” is not set to “ON,” the notice does not

appear at the scene.

1 During playback of a DVD having

multiple alternative angles recorded,

press (ANGLE) when a notice appears.

The number of the currently selected angle

is displayed at the upper right.

2 Press (ANGLE) repeatedly to select your

favorite angle number, while the angle

number is displayed.

Each time you press (ANGLE), the angle

number switches.

Notes

• You can switch the angle only if multiple angles

are recorded on the DVD.

• The total number of recorded angles differs

depending on the DVD and scene.

• You can only switch the angle during normal

playback. You cannot switch the angle during

fast forward/reverse playback.

• When the selected scene with multi angles

appears, the angle is automatically switched to

the angle number you selected in step 2.

Changing the audio

language

Some DVDs have multiple audio languages

you can choose from.

During playback, press (AUDIO)

repeatedly to select the desired audio

language.

The current audio language is displayed at

the upper left.

Example: an audio language display

The format of the sound source

(Dolby D, DTS, or LPCM) may appear.

When the display for the language code

appears, input the language code

corresponding to the desired language

(page 34).

Notes

• You can switch the audio language only if

multiple audio languages are recorded on the

DVD.

• You can also change the audio languages by

using the DVD menu (page 17) or the setup

screen* (page 24).

You can change to a specific audio language

using a setup screen, only if the language is

included in both the disc and the setup screen.

• This function varies or may not work, depending

on the DVD.

3 / 5

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

789

VOL

ANGLE

The angle number you

have currently

selected/the total

number of multiple

alternative angles

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

789

VOL

AUDIO

AUDIO 1/2: Dolby D 5.1 ENGLISH

Using the PBC (playback

control) function

During playback of a PBC compatible Video

CD, you can display the PBC menu and select

the item from the menu.

1 Insert a Video CD, then press

(TOP MENU) repeatedly to select “PBC

ON.”

Depending on the Video CD, the PBC menu

may be displayed automatically after

inserting a Video CD.

Each time you press (TOP MENU), the PBC

menu function turns on or off.

2 Press u.

The PBC menu is displayed.

3 While the PBC menu screen is displayed;

— press the number buttons to select the

number of the desired item.

— press ./> to go to the previous/

next page.

Button functions vary or may not work,

depending on the Video CD.

Notes

• To display the PBC menu during playback of a

Video CD, press (TOP MENU) repeatedly to select

“PBC ON,” then press u.

• During playback of a Video CD with “PBC ON,”

press the number buttons or ./> to change

the item. The PBC menu is not displayed but the

item you selected starts to play.

• During playback of a Video CD with “PBC ON,”

press O to display the PBC menu.

• The PBC menus differ, depending on the Video

CD. Read the instruction manual supplied with

the Video CD.

Changing the audio output

You can select the desired audio output from

“STEREO,” “L-MONO,” “R-MONO,” or “MIX-

MONO” during Video CD or Audio CD

playback.

1 During playback, press (AUDIO).

The current output is displayed at the

upper left.

Example: an audio output display

2 Press (AUDIO) to select the desired

output from “STEREO,” “L-MONO,” “R-

MONO,” or “MIX-MONO” while the

output is displayed.

Each time you press (AUDIO), the output

switches.

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

789

VOL

AUDIO

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

7890

VOL

TOP MENU

./>

Number

buttons

L-MONO

Changing Setup

You can set up and adjust this player using the

on-screen setup menu. Most settings need to

be set when you first use this player.

Displaying the multi-angle

notice

— ANGLE MARK

If various angles (multi-angles) for a scene are

recorded on the DVD and you have set the

“ANGLE MARK” to “ON,” a notice appears at

the scene.

1 Press (SETUP).

The main page for setup appears.

“PREFERENCES” is only available when

playback is stopped.

2 Press M or m repeatedly to select

“GENERAL SETUP,” then press (ENTER).

ENTER

POWER

DISPLAY

CLEAR

SETUP

AUDIO

ANGLE

SUBTITLE

TOP MENU

INPUT

MONITOR

POWER

123

456

789

VOL

ENTER

M/m

</,

SETUP

SETUP MENU -- MAIN PAGE

GENERAL SETUP

SPEAKER SETUP

AUDIO SETUP

PREFERENCES

EXIT SETUP

-- GENERAL PAGE - -

TURN ANGLE MARK ON

OFF

ANGLE MARK

CAPTIONS

SCR SAVER

MAIN PAGE

3 Press M or m repeatedly to select “ANGLE

MARK,” then press ,.

4 Press M or m repeatedly to select “ON.”

5 Press (ENTER).

“ANGLE MARK ON” is displayed at the

lower left on the monitor.

To turn off the multi-angle notice, select “OFF”

in step 4.

To return to normal play screen, press

(SETUP) anytime.

Note

To return to the main page for setup, press M/m/<

repeatedly to select “MAIN PAGE,” then press

(ENTER).

ページが読み込まれています...

Sony MV-101 取扱説明書

ブランド: Sony

モデル: MV-101

カテゴリー: DVDプレーヤー

タイプ: 取扱説明書

PDFをダウンロードします

報告

他の言語で

English: Sony MV-101 Operating instructions

Sony MV-101 取扱説明書

Sony MV-101 取扱説明書

他の言語で

関連論文

その他のドキュメント