STAND MIXER USE AND CARE GUIDE
GUIDE TO EXPERT RESULTS
10
2
1
4
6
8
O
C
A
U
T
I
O
N
:
U
n
p
l
u
g
b
e
f
o
r
e
i
n
s
e
r
t
i
n
g
o
f
r
e
m
o
v
i
n
g
p
a
r
t
s
KitchenAid
St.
Joseph, M ichigan US A
®
Heavy Duty
Kitc
henAid
St. Joseph, Mic
higan,
USA
0 1 2 4 6 8 10
W10190231B
English
2
Table of Contents
Stand Mixer Safety ..........................................................................................................4
Important Safeguards .....................................................................................................4
Electrical Requirements ................................................................................................... 5
K45SS Tilt-Head Stand Mixer Features .............................................................................6
KSM150 Tilt-Head Stand Mixer Features .........................................................................7
Assembling Your Tilt-Head Stand Mixer ...........................................................................8
K5SS Bowl-Lift Stand Mixer Features ...............................................................................9
Assembling Your Bowl-Lift Stand Mixer .........................................................................10
Assembling Your Pouring Shield ....................................................................................11
Using Your KitchenAid
®
Flat Beater, Wire Whip and Dough Hook .................................12
Beater to Bowl Clearance ..............................................................................................12
Care and Cleaning ........................................................................................................13
Planetary Mixing Action ................................................................................................13
Stand Mixer Use ...........................................................................................................13
Speed Control Guide - 10 Speed Mixers ........................................................................ 14
Mixing Tips ...................................................................................................................15
Mixing and Kneading Yeast Dough ...............................................................................16
Egg Whites ...................................................................................................................17
Whipped Cream............................................................................................................17
Accessories - General Instructions .................................................................................18
When You Need Service ................................................................................................19
KitchenAid
®
Household Stand Mixer Warranty ..............................................................20
Service Centers ..............................................................................................................20
33
Chinese/
....................................................................................................... 22
........................................................................................................................... 22
................................................................................................................................... 23
K45SS
............................................................................................ 24
KSM150 ......................................................................................... 25
........................................................................................................... 26
K5SS .............................................................................................. 27
........................................................................................................... 28
............................................................................................................................... 29
KitchenAid
®
.......................................................................... 30
................................................................................................................... 30
............................................................................................................................... 31
....................................................................................................................... 31
................................................................................................................... 31
10 .................................................................................................. 32
................................................................................................................................... 33
............................................................................................................... 34
........................................................................................................................................... 35
............................................................................................................................... 35
....................................................................................................................... 36
....................................................................................................................... 37
KitchenAid
®
...................................................................................... 38
................................................................................................................................... 38
English
4
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be
followed including the following:
1. Read all instructions.
2. To avoid risk of electrical shock, do
not put Stand Mixer in water or other
liquid.
3. The appliance is not intended for use
by young children or infirm persons
without supervision.
4. Unplug Stand Mixer from outlet when
not in use, before putting on or
taking off parts and before cleaning.
5. Avoid contacting moving parts.
Keep hands, hair, clothing, as well
as spatulas and other utensils away
from beater during operation to
reduce the risk of injury to persons
and/or damage to the Stand Mixer.
6. Do not operate Stand Mixer with
a damaged cord or plug or after
the Stand Mixer malfunctions, or
is dropped or damaged in any
manner. Return appliance to the
nearest Authorized Service Center
for examination, repair or electrical or
mechanical adjustment.
7. The use of accessories not
recommended or sold by KitchenAid
may cause fire, electrical shock or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over edge
of table or counter.
10. Remove flat beater, wire whip or dough
hook from Stand Mixer before washing.
11. This product is designed for
household use only.
SAVE THESE INSTRUCTIONS
Stand Mixer Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously
injured if you don’t immediately
follow instructions.
You can be killed or seriously injured
if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
DANGER
English
5
Your Stand Mixer operates on a regular
220-240 volt A.C., 50/60 hertz house
current. The wattage rating for your
Stand Mixer is printed on the trim band.
This wattage is determined by using the
accessories which draws the greatest
power. Other recommended accessories
may draw significantly less power.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.
Electrical Requirements
English
6
K45SS Tilt-Head Stand Mixer Features
10
2
1
4
6
8
O
C
A
U
T
I
O
N
:
U
n
p
l
u
g
b
e
f
o
r
e
i
n
s
e
r
t
i
n
g
o
f
r
e
m
o
v
i
n
g
p
a
r
t
s
KitchenA id
St. Joseph, M ichigan US A
Motor Head
Beater Height
Adjustment
Screw
Motor Head
Locking Lever
(not shown)
Accessory Knob
Accessory Hub
Flat Beater
Wire Whip
Dough Hook
Speed
Control
Lever
Bowl Clamping Plate
Beater Shaft
4.25 L
(4.5 qt)
Stainless
Steel
Bowl
English
7
Motor Head
Beater Height
Adjustment
Screw
Motor Head
Locking Lever
(not shown)
Accessory Knob
Accessory Hub
Flat Beater
Wire Whip
Speed
Control
Lever
Bowl Clamping Plate
Beater Shaft
4.8 L
(5 qt)
Stainless
Steel Bowl
KSM150 Tilt-Head Stand Mixer Features
Pouring
Shield
Dough Hook
English
8
Assembling Your Tilt-Head Stand Mixer
To Attach Bowl
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and tilt motor head back.
4. Place bowl on bowl clamping plate.
5. Turn bowl gently in clockwise
direction.
To Remove Bowl
1. Turn speed control to “O.”
2. Unplug Stand Mixer or
disconnect power.
3. Hold the locking lever in the UNLOCK
position and tilt motor head back.
4. Turn bowl counterclockwise.
To Attach Flat Beater,
Wire Whip, or Dough Hook
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and raise motor head.
4. Slip beater onto beater shaft and press
upward as far as possible.
5. Turn beater to right, hooking beater
over pin on shaft.
To Remove Flat Beater,
Wire Whip, or Dough Hook
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and raise motor head.
4. Press beater upward as far as possible
and turn left.
5. Pull beater from beater shaft.
To Lock Motor Head
1. Make sure motor head is completely
down.
2. Place locking lever in LOCK position.
3. Before mixing, test lock by attempting
to raise head.
To Unlock Motor Head
1. Place lever in UNLOCK position.
NOTE: Motor head should always be
kept in LOCK position when using the
Stand Mixer.
To Operate Speed Control
Plug Stand Mixer in proper electrical
outlet. Speed control lever should always
be set on lowest speed for starting, then
gradually moved to desired higher speed
to avoid splashing ingredients out of bowl.
See “Speed Control Guide” section.
Pin
10
21
4
6
8
O
English
9
K5SS Bowl-Lift Stand Mixer Features
Heavy Duty
Kitc
henAid
St. Joseph,
Michigan,
USA
0 1 2 4 6 8 10
Motor Head
Bowl Lift
Handle
(not shown)
Spring Latch, Bowl
Pin and Bowl Height
Adjustment Screw
(not shown)
Accessory
Knob
Accessory Hub
Locating Pins
Wire Whip
Flat Beater
Dough Hook
Speed Control
Knob
Bowl Support
Beater
Shaft
4.8 L (5 qt)
Stainless Steel Bowl
Pouring
Shield
English
10
Assembling Your Bowl-Lift Mixer
To Attach Bowl
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl-lift handle in down
position.
4. Fit bowl supports over locating pins.
5. Press down on back of bowl until
bowl pin snaps into spring latch.
6. Raise bowl before mixing.
7. Plug into proper electrical outlet.
To Raise Bowl
1. Rotate handle to straight-up position.
2. Bowl must always be in raised, locked
position when mixing.
To Lower Bowl
1. Rotate handle back and down.
To Remove Bowl
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl-lift handle in down
position.
4. Remove flat beater, wire whip, or
dough hook.
5. Grasp bowl handle and lift straight up
and off locating pins.
To Attach Flat Beater,
Wire Whip, or Dough Hook
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Lower bowl by rotating bowl-lift
handle downward.
4. Slip flat beater on beater shaft.
5. Turn beater to left, hooking beater
over the pin on shaft.
6. Plug into proper electrical outlet.
Raise
English
11
To Attach Pouring Shield
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect power.
3. Attach flat beater, dough hook, or wire
whip and bowl (depending on your
model, see “Assembling Your Tilt-Head
Stand Mixer” or “Assembling Your Bowl-
Lift Mixer”).
4. From the front of the Stand Mixer, slide
the pouring shield over the bowl until the
shield is centered. The bottom rim of the
shield should fit within the bowl.
To Remove Pouring Shield
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect power.
3. Lift the front of the pour shield clear of
the bowl rim and pull forward.
4. Remove accessory and bowl.
To Use Pouring Shield
1. For best results, rotate the shield so the
motor head covers the “u” shaped gap
in the shield. The pouring chute will be
just to the right of the accessory hub
as you face the Stand Mixer.
2. Pour the ingredients into the bowl
through the pouring chute.
Assembling Your Pouring Shield*
* If Pouring Shield is included.
Pouring Chute
Assembling Your Bowl-Lift Mixer
To Remove Flat Beater,
Wire Whip, or Dough Hook
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Lower bowl by rotating bowl-lift
handle downward.
4. Press beater upward and turn right.
5. Pull beater from beater shaft.
Stand Mixer Speed Control
To reduce the potential for splash-out,
always begin mixing using Speed 1 (STIR
speed), then gradually move to higher
speeds as needed. See “Speed Control
Guide.”
Auto-Reset Motor Protection
If the Stand Mixer stops due to overload,
slide the speed control lever to “O.”
After a few minutes, the Stand Mixer will
automatically reset. Slide the speed control
lever to the desired speed and continue
mixing.
If the Stand Mixer does not restart, see
“When You Need Service.”
Pin
English
12
Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of
the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far
away from the bowl, you can correct clearance easily.
Beater to Bowl Clearance
Tilt Head Stand Mixers:
1. Turn speed control to “O.”
2. Unplug Stand Mixer.
3. Lift motor head.
4. Turn screw (A) SLIGHTLY counter-
clockwise (left) to raise flat beater or
clockwise (right) to lower flat beater.
5. Make adjustment with flat beater, so it
just clears surface of bowl. If you over
adjust the screw, the bowl lock lever
may not lock into place.
NOTE: When properly adjusted, the flat
beater will not strike on the bottom or
side of the bowl. If the flat beater or the
wire whip is so close that it strikes the
bottom of the bowl, coating may wear off
the beater or wires on whip may wear.
Bowl-Lift Stand Mixers:
1. Turn speed control to “O.”
2. Unplug Stand Mixer.
3. Place bowl-lift handle in down
position.
4. Attach flat beater.
5. Turn screw (B) SLIGHTLY counter-
clockwise (left) to raise flat beater or
clockwise (right) to lower flat beater.
6. Place bowl-lift handle in up position to
check clearance.
7. Repeat steps 5 and 6 if necessary.
NOTE: When properly adjusted, the flat
beater will not strike on the bottom or
side of the bowl. If the flat beater or the
wire whip is so close that it strikes the
bottom of the bowl, coating may wear off
the beater or wires on whip may wear.
A
B
Using Your KitchenAid
®
Flat Beater,
Wire Whip and Dough Hook
Flat Beater for normal to heavy mixtures:
cakes biscuits creamed frostings
quick breads candies meat loaf
cookies mashed potatoes pie pastry
Wire Whip for mixtures that need air incorporated:
eggs sponge cakes egg whites
angel food cakes heavy cream mayonnaise
boiled frostings some candies
Dough Hook for mixing and kneading yeast doughs:
breads coffee cakes rolls
buns pizza dough
English
13
Bowl, coated flat beater and coated
dough hook may be washed in an
automatic dishwasher. Or, clean them
thoroughly in hot sudsy water and rinse
completely before drying. Do not store
beaters on shaft.
NOTE: The wire whip is not
dishwasher-safe.
NOTE: Always be sure to unplug Stand
Mixer before cleaning. Wipe Stand Mixer
with a soft, damp cloth. Do not use
household/commercial cleaners. Do not
immerse in water. Wipe off beater shaft
frequently, removing any residue that may
accumulate.
Care and Cleaning
During operation, the
flat beater moves
around the stationary
bowl, at the same
time turning in the
opposite direction on
its own axis. The diagram
shows the complete
coverage of the bowl made by the path
of the beater. Your KitchenAid
®
Stand
Mixer will mix faster and more thoroughly
than most other electric mixers. Therefore,
the mixing time in most recipes must be
adjusted to avoid overbeating.
Planetary Mixing Action
Stand Mixer Use
NOTE: Do not scrape bowl while Stand
Mixer is operating.
The bowl and beater are designed to
provide thorough mixing without frequent
scraping. Scraping the bowl once or twice
during mixing is usually sufficient. Turn
unit off before scraping.
The Stand Mixer may warm up during use.
Under heavy loads with extended mixing
time, you may not be able to comfortably
touch the top of the unit. This is normal.
English
14
Speed Control Guide – 10 Speed Mixers
Number Speed Description
1 STIR For slow stirring, combining, mashing or
starting all mixing procedures. Use to
add flour and dry ingredients to batter, and
add liquids to dry ingredients. Do not use STIR
Speed to mix or knead yeast doughs.
2 SLOW MIXING For slow mixing, mashing or faster
stirring. Use to mix and knead yeast doughs,
heavy batters and candies, start mashing
potatoes or other vegetables, cut shortening
into flour, mix thin or splashy batters. Use with
Can Opener accessory.
4 MIXING, For mixing semi-heavy batters, such as cookies.
BEATING Use to combine sugar and shortening and
to add sugar to egg whites for meringues.
Medium speed for cake mixes. Use with: Food
Grinder, Rotor Slicer/Shredder, Pasta Roller, and
Fruit/Vegetable Strainer.
6 BEATING, For medium fast beating (creaming) or whipping.
CREAMING Use to finish mixing cake, doughnut, and other
batters. High speed for cake mixes. Use with
Citrus Juicer accessory.
8 FAST BEATING, For whipping cream, egg whites or
WHIPPING boiled frostings.
10 FAST WHIPPING For whipping small amounts of cream, egg
whites or for final whipping of mashed
potatoes. Use with Pasta Maker and Grain Mill
accessory.
NOTE: Will not maintain fast speeds under
heavy loads, such as when using Pasta Maker
or Grain Mill accessory.
NOTE: Do not exceed Speed 2 when preparing yeast doughs as this may cause damage
to the Stand Mixer.
English
15
Mixing Tips
Converting Your Recipe
for the Stand Mixer
The mixing instructions found in this
book can be used to convert your favorite
recipes for use with your KitchenAid
®
Stand Mixer.
To help determine a mixing procedure,
your own observations and experience will
be needed. Watch the batter or dough
and mix only until it has the desired
appearance described in your recipe such
as “smooth and creamy.” Use the “Speed
Control Guide” to help determine proper
mixing speeds.
Adding Ingredients
The standard procedure to follow when
mixing most batters, especially cake and
cookie batters, is to add:
1
/3 dry ingredients
1
/2 liquid ingredients
1
/3 dry ingredients
1
/2 liquid ingredients
1
/3 dry ingredients
Use Speed 1 until ingredients have been
blended. Then gradually increase to
desired speed.
Always add ingredients as close to
side of bowl as possible, not directly into
moving beater. The Pouring Shield can be
used to simplify adding ingredients.
NOTE: If ingredients in very bottom of
bowl are not thoroughly mixed, the beater
is not far enough into the bowl. See
“Beater to Bowl Clearance.”
Cake Mixes
When preparing packaged cake mixes, use
Speed 4 for medium speed and Speed 6
for high speed. For best results, mix for
the time stated on the package directions.
Adding Nuts, Raisins, or
Candied Fruits
Solid materials should be folded in the last
few seconds of mixing on Speed 1. The
batter should be thick enough to keep the
fruit or nuts from sinking to the bottom of
the pan during baking. Sticky fruits should
be dusted with flour for better distribution
in the batter.
Liquid Mixtures
Mixtures containing large amounts of
liquid ingredients should be mixed at
lower speeds to avoid splashing. Increase
speed only after mixture has thickened.
Kneading Yeast Doughs
ALWAYS use the dough hook to mix and
knead yeast doughs. Use Speed 2 to mix
or knead yeast doughs. Use of any other
speed creates high potential for unit failure.
When making dough with a 4.25 L
(4.5 qt) tilt-head Stand Mixer, do not use
recipes calling for more than 0.87 kg
(7 cups) all-purpose flour or 0.81 kg
(6 cups) whole wheat flour.
When making dough with a 4.8 L
(5 qt) tilt-head Stand Mixer, do not use
recipes calling for more than 1.00 kg
(8 cups) all-purpose flour or 0.81 kg
(6 cups) whole wheat flour.
English
16
“Rapid Mix” describes a bread baking
method that calls for dry yeast to be
mixed with other dry ingredients before
liquid is added. In contrast, the traditional
method is to dissolve yeast in warm water.
1. Place all dry ingredients including yeast
into bowl, except last 125 to 250 g
(1 to 2 cups) flour.
2. Bowl-lift Stand Mixers: Attach
bowl and dough hook. Raise Stand
Mixer bowl.
Tilt-Head Stand Mixers: Attach
bowl and dough hook. Lock Stand
Mixer head.
3. Turn to Speed 2 and mix about
15 seconds, or until ingredients
are combined.
4. Continuing on Speed 2, gradually add
liquid ingredients to flour mixture and
mix 1 to 2 minutes longer.
NOTE: If liquid ingredients are added
too quickly, they will form a pool around
the dough hook and slow down mixing
process.
5. Continuing on Speed 2, gently add
remaining flour, 60 g (
1
/2 cup) at a
time, as needed. Mix until dough starts
to clean sides of bowl, about
2 minutes.
6. When dough clings to hook, knead on
Speed 2 for 2 minutes, or until dough
is smooth and elastic.
NOTE: Dust flour on the inside of bowl
and dough hook to keep dough
from sticking.
7. Bowl-Lift Stand Mixers: Lower bowl
on Stand Mixer and remove dough
from the bowl and dough hook.
Tilt-Head Stand Mixers: Unlock and
tilt back Stand Mixer head and remove
dough from the bowl and
dough hook.
8. Follow directions in recipe for rising,
shaping, and baking.
When using the traditional method to
prepare a favorite recipe, dissolve yeast
in warm water in warmed bowl. Add
remaining liquids and dry ingredients,
except last 125 to 250 g (1 to 2 cups)
flour. Turn to Speed 2 and mix about
1 minute, or until ingredients are
thoroughly mixed. Proceed with Steps
4 through 6.
Both methods work equally well for
bread preparation. However, the “Rapid
Mix” method may be a bit faster and
easier for new bread bakers. It is slightly
more temperature tolerant because the
yeast is mixed with dry ingredients rather
than with warm liquid.
Mixing and Kneading Yeast Dough
English
17
Egg Whites
Place room temperature egg whites in
clean, dry bowl. Attach bowl and wire
whip. To avoid splashing, gradually turn
to designated speed and whip to desired
stage. See chart below.
AMOUNT SPEED
1 egg white ............. GRADUALLY to 10
2-4 egg whites ............. GRADUALLY to 8
6 or more
egg whites ............. GRADUALLY to 8
Whipping Stages
With your KitchenAid
®
Stand Mixer, egg
whites whip quickly. Avoid overwhipping.
This list tells you what to expect.
Frothy
Large, uneven air bubbles.
Begins to Hold Shape
Air bubbles are fine and compact; product
is white.
Soft Peak
Tips of peaks fall over when wire whip is
removed.
Almost Stiff
Sharp peaks form when wire whip is
removed, but whites are actually soft.
Stiff but not Dry
Sharp, stiff peaks form when wire whip is
removed. Whites are uniform in color and
glisten.
Stiff and Dry
Sharp, stiff peaks form when wire whip is
removed. Whites are speckled and dull in
appearance.
Whipped Cream
Pour cold whipping cream into chilled bowl.
Attach bowl and wire whip. To avoid
splashing, gradually turn to designated
speed and whip to desired stage. See
chart below.
AMOUNT SPEED
59 mL (
1
/4 cup) ............. GRADUALLY to 10
118 mL (
1
/2 cup) ........... GRADUALLY to 10
236 mL (1 cup) .............. GRADUALLY to 8
472 mL (1 pint ) ............ GRADUALLY to 8
Whipping Stages
Watch cream closely during whipping.
Because your KitchenAid
®
Stand Mixer
whips so quickly, there are just a few
seconds between whipping stages. Look
for these characteristics:
Begins to Thicken
Cream is thick and custard-like.
Holds its Shape
Cream forms soft peaks when wire whip
is removed. Can be folded into other
ingredients when making desserts and
sauces.
Stiff
Cream stands in stiff, sharp peaks when
wire whip is removed. Use for topping
on cakes or desserts, or filling for cream
puffs.
English
18
Accessories
To Attach
1. Turn speed control to “O.”
2. Unplug Stand Mixer or disconnect
power.
3. Loosen accessory knob by turning it
counterclockwise. Remove accessory
hub cover.
4. Insert accessory shaft housing into
accessory hub, making certain that
accessory power shaft fits into square
accessory hub socket. It may be
necessary to rotate accessory back and
forth. When accessory is in proper
position, the pin on the accessory will
fit into the notch on the hub rim.
5. Tighten accessory knob by turning
clockwise until accessory is completely
secured to Stand Mixer.
6. Plug into proper electrical outlet.
General Information
KitchenAid
®
Accessories are designed to assure long life. The accessory power shaft and
hub socket are of a square design, to eliminate any possibility of slipping during the
transmission of power to the accessory. The hub and shaft housing are tapered to assure
a snug fit, even after prolonged use and wear. KitchenAid
®
Accessories require no extra
power unit to operate them; the power unit is built-in.
See the Stand Mixer Attachments Use and Care Guide for speed settings and operating
times.
General Instructions
‡ Not part of
Stand Mixer.
Accessory
Hub Socket
Accessory
Knob
Notch
Pin
Accessory Shaft
Housing
Accessory
Power Shaft‡
Accessory
Housing
English
19
To Remove
1. Turn speed control to “O.”
2. Unplug Stand Mixer or
disconnect power.
3. Loosen accessory knob by turning it
counterclockwise. Rotate accessory
slightly back and forth while
pulling out.
4. Replace accessory hub cover. Tighten
accessory knob by turning it clockwise.
Please read the following before
calling your service center.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the unit. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See “Beater to Bowl
Clearance.”
If your Stand Mixer should malfunction
or fail to operate, please check the
following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit is
closed.
- Turn the Stand Mixer off for 10-
15 seconds, then turn it back on. If the
Stand Mixer still does not start, allow it
to cool for 30 minutes before turning it
back on.
- If the problem is not due to one of the
above items, see “Service Centers.”
When You Need Service
General Instructions
English
20
Length of
Warranty:
China:
One Year Full Warranty
from date of purchase.
KitchenAid
Will Pay For:
Replacement parts and
repair labor costs to
correct defects in materials
or workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center.
KitchenAid
Will Not Pay For:
A. Repairs when Stand
Mixer is used for
operations other than
normal household food
preparation.
B. Damage resulting from
accident, alterations,
misuse, abuse, or
installation/ operation
not in accordance with
local electrical codes.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR
INDIRECT DAMAGES.
KitchenAid
®
Household
Stand Mixer Warranty
Service Centers
In China:
Greenfield Worldtrade
801 New Commerce Centre
19 On Sum Street
Shatin, N.T., Hong Kong
Tel.: +852/2321-1217
Fax.: +852/2321-8867
www.greenfieldworld.com
In U.S.A.:
Customer Satisfaction Center
KitchenAid Portable Appliances
P.O. Box 218
St. Joseph, MI 49085
USA
Toll-free number (in U.S.A. only):
1-800-541-6390
www.KitchenAid.com
All service should be handled locally by an Authorized KitchenAid Service Center. Contact
the dealer from whom the unit was purchased to obtain the name of the nearest
Authorized KitchenAid Service Center.
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
