Philips HR2332/11 取扱説明書

User manual 2

用户手册

37

HR2332

使用产品前请仔细阅读请本用户手册

保留备用

English

3

Quick Start Guide/

快速入门指南

3

1

2

3

4 5

2

1

2

1

Disassembling and

cleaning before rst use

首次使用前的拆卸和清洁

4

English

2

3

5

1

2

6

7

2

1

2

1

2

3

4

5

2

1

6

2

1

7

8

9

1

4

Assembling

组装

Using the Pasta

and noodle

maker

使用意面

/

面条机

English

5

Important �� 6

What's in the box �� 11

Overview �� 12

Disassembling and cleaning before

rst use �� 14

Assembling �� 16

Using the Pasta and noodle maker �� 19

Cleaning �� 27

Storage �� 30

Troubleshooting �� 31

Product information ��34

Recycling ��34

Guarantee and service ��35

Table of Contents

6

English

Important

Safety

Read this user manual carefully

before you use the appliance, and

save it for future reference.

• Before you connect the appliance to the power,

make sure that the voltage indicated on the bottom

of the appliance corresponds to the local power

voltage.

• Make sure that your hands are dry before you insert

the plug into the power outlet.

• Do not immerse the main unit in water or rinse it with

water or other liquid.

• To prevent a short circuit or an electric shock, do not

pour water or any liquid on the appliance.

• Make sure that the plug is firmly inserted into the

power outlet.

• Never connect this appliance to a timer switch or

separate remote control system.

• Make sure that the appliance is assembled correctly

before you insert the plug into the power outlet.

• If the power cord, the plug, or other parts are

damaged, do not use the appliance.

• Make sure the control knob is in the OFF position

and the appliance is unplugged when not in use,

left unattended, before assembling, disassembling,

cleaning or storing. Always make sure the appliance

is properly assembled before putting the plug

into the wall outlet and operating the appliance.

Warning

English

7

Warning

The appliance will not operate unless it is properly

assembled.

• Do not place hands, fingers or utensils in the mixing

chamber of the appliance unless the control knob

is in the OFF position, the appliance is unplugged

and the motor and mixing paddle have come

to a complete stop. Ensure the motor and the

mixing paddle have completely stopped before

disassembling, cleaning or storing.

• If the power cord is damaged, you must have it

replaced by Philips, a service center authorized

by Philips or similarly qualified persons to avoid a

hazard.

• Do not replace parts of the appliance by yourself.

• This appliance shall not be used by children. Keep

the appliance and its power cord out of reach of

children.

• This appliance is not intended for use by persons

with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance by a

person responsible for their safety.

• Children should be supervised to ensure that they

do not play with the appliance.

• To prevent any accidents, do not use the appliance

if it is damaged for any reason.

8

English

• Before using the appliance for the first time,

disassemble and wash the accessories thoroughly

(refer to the chapter “Disassemble and cleaning

before first use”).

• This appliance is intended for household use only.

• Never use any accessories or parts from other

manufacturers or that Philips does not specifically

reommend. If you use such accessories or parts, your

guarantee becomes invalid.

• Do not use this appliance on an unstable or uneven

surface.

• Do not disconnect the power cord before the

processing is complete. If you have to stop processing,

disconnect the power cord before you perform other

operations.

• Do not exceed the maximum operation cycle of

2 cycles continuously at all applications. To better

protect the lifetime of the appliance, you can

restart using the appliance after 30 minutes upon 2

continuous operation cycles.

• If you intend to use the appliance continuously, clean

the shaping disc with the supplied cleaning tool each

time after use.

• Do not bend, jerk, twist, or bundle the power cord

forcibly, nor put it under heavy objects.

• Unplug the appliance when not in use.

• Do not use the appliance near flammable objects

such as table cloth or drapes.

Caution

English

9

Caution

• Pull out the power plug immediately after you detect

smoke.

• When unplugging the power cord, do not pull the

cable but grab the plug part.

• Keep the power plug clean.

• Do not put heavy objects on the appliance.

• This appliance is designed as consumer kitchen

appliance. Do not use for any other purpose.

• Do not move the appliance while it is operating.

• Disconnect the power cord if the appliance is left

unattended and before assembling, disassembling or

cleaning.

• Place the appliance in a dry and well ventilated place

after use.

• Do not hold and move the appliance by grabbing the

shaping disc holder. Hold the main unit to do so.

• Make sure the shaping disc hole is unblocked each

time before using.

• Keep hands, hair, clothing, as well as spatulas and

other utensils away from appliance during operation

to reduce the risk of injury to persons, and/or damage

to the appliance.

• Do not put your fingers or other objects into the Pasta

and noodle maker opening while it is in operation.

Avoid contact with moving parts.

• Do not attempt to defeat the cover interlock

mechanism.

10

English

• The shaping discs and all detachable parts of the

appliance are dishwasher safe. When you clean

them in dishwasher, make sure to select the proper

program which has a maximum temperature at no

higher than 60°C (140°F).

• Use only on properly grounded outlet.

Caution

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations

regarding exposure to electromagnetic elds.

English

11

Congratulations on your purchase, and welcome to Philips!

To fully benet from the support that Philips oers, register your product at

www.philips.com/welcome.

Read this user manual carefully before you install and use the appliance. Save it

for future reference.

What's in the box

Spaghetti/

Thin noodle*

Shaping discs:

Penne Lasagna

Fettuccine/

Ban Mian noodle

Water cup

User manual

Main unit

Recipe book

Flour cup

Flat cleaning

tool

* The spaghetti/thin noodle shaping disc is assembled on the appliance upon purchase.

12

English

Overview

Start/pause

button

Control knob

Extra-extrusion

Mixing paddle Squeezing bar

Auto operationOFF

Main unit

English

13

Power cord

Mixing chamber

Mixing chamber lid

Storage box

Squeezing tube Shaping disc Shaping disc holder

Main unit Cord storage

wrap

14

English

Important

1 Pull the lid to unlock it and then remove the lid

from the mixing chamber.

2 Slide the mixing chamber o the main unit.

1

2

Disassembling

and cleaning

before rst use

• Before using the appliance for the first time, remove and safely discard any

packing material and /or promotional labels.

• Take out all detachable parts and accessories, wash and thoroughly dry all

parts and accessories (refer to the chapter "Cleaning").

• Do not use water to rinse or soak the main unit, the power cord, or the

power plug.

• Do not use a scouring pad or similar cleaners as these will scratch the

plastic surface and affect the lifetime of the Pasta and noodle maker.

• The shaping discs and all detachable parts of the appliance are dishwasher

safe. When you clean them in a dishwasher, make sure to select the proper

program which has a maximum temperature at no higher than 60°C (140°F).

• This appliance is intended for household use only.

English

15

3 Turn the shaping disc holder counterclockwise to

remove it from the mixing chamber outlet.

4 Put your nger in the mixing chamber and push the squeezing tube

outwards to slide it out of the mixing chamber outlet. Detach the shaping

disc, and then pull the squeezing bar out of the squeezing tube.

5 Take the mixing paddle out of the mixing

chamber.

6 Clean all detachable parts and accessories, and then wipe them dry.

1

2

3

16

English

Important

Assembling

Follow below assembling steps to install

the Pasta and noodle maker.

1 Slide the mixing chamber onto the main unit.

Note:

• Make sure the xing levers

on the main

unit are tted with the openings on the

bottom of the mixing chamber.

2 Put the mixing paddle in the mixing chamber as

shown in the illustration.

1

• Make sure the appliance is not plugged in during assembly.

English

17

3 Insert the squeezing tube into the mixing

chamber.

Note:

• Make sure the big opening on the squeezing

tube faces up when you insert the tube into the

chamber.

4 Insert the squeezing bar into the mixing chamber. Make sure the squeezing

bar slides all the way through both the squeezing tube and the mixing

paddle and into the shaft in the main unit.

Note:

• Slightly turn the mixing paddle to make sure the squeezing bar is

connected correctly with the shaft

in the main unit.

5 Attach the shaping disc on the mixing chamber

outlet.

Note:

• Make sure the at side of the shaping disc is

facing out.

• Make sure the shaping disc ts into the xing

point on the squeezing bar.

• Make sure the arrow on the shaping disc face

upwards when you attach it on the mixing

chamber outlet.

1

18

English

6 Press the shaping disc through the opening of the shaping disc holder, and

then assemble the holder on the mixing chamber outlet. Turn the holder

clockwise to rmly lock it in place.

Always attach the shaping disc on the mixing

chamber outlet before you assemble the shaping disc

holder. Never put the shaping disc in the shaping disc

holder and assemble them on the mixing chamber

outlet at the same time.

7 Attach the lid onto the mixing chamber.

Note:

• If the mixing chamber lid is not properly installed,

the safety switch will prevent the appliance from

working.

1

2

1

English

19

Important

Using the Pasta

and noodle

maker

• Place the product on a flat surface and prevent table shaking or vibration.

• Make sure all the parts are well assembled before plugging in.

• Do not put less than 200g (1 flour cup) or more than 400g (2 flour cups) of

flour in the chamber.

• Pour in the liquid slowly through the water slot after the appliance starts

kneading.

• If you want to dispose of the weighed flour before processing with the next

batch, empty the chamber and restart the appliance by unplugging and

plugging in again.

• Do not put any ingredients that are 60°C / 140°F or above into the Pasta and

noodle maker, or place the Pasta and noodle maker in surroundings at high

temperature (60°C / 140°F), for instance in a high temperature sterilization

environment. This will deform the appliance.

• Do not pour liquid into the mixing chamber before the Pasta and noodle

maker starts running.

• Make sure the shaping disc and shaping disc holder are assembled properly

before plugging in the appliance.

20

English

Preparing and measuring the our

1 Scoop one full cup of our using the our cup.

Scrape o any excessive our from the cup edge

with the supplied at cleaning tool. 1 full cup of

our weighs around 200g, and 2 full cups of our

weigh around 400g.

Note:

• Do not shake or hit the our cup to remove

excessive our. This will aect the our weight.

• Use a kitchen scale to measure the weight more

accurately.

• 200g of our makes about 200g fresh

pasta/noodles. 400g of our makes about 450g

fresh pasta/noodles.

2 Pull the lid to unlock it and then remove the

lid from the mixing chamber.

1

2

ページが読み込まれています...

Philips HR2332/11 取扱説明書

Philips HR2332/11 取扱説明書

他の言語で

関連論文

その他のドキュメント