Blackmagicdesign Web Presenter Streamer 取扱説明書

Installation and Operation Manual

Blackmagic

Web Presenter

English, 日本語, Français, Deutsch, Español, 中文,

한국어, Русский, Türkçe, Italiano and Português.

April 2017

Languages

To go directly to your preferred language, simply click on the hyperlinks listed in the

contents below.

English 3

日本語 27

Français 52

Deutsch 77

Español 102

中文 97

한국어 121

Русский 146

Türkçe 171

Italiano 195

Português 220

Welcome!

Thank you for purchasing your Blackmagic Web Presenter!

With Blackmagic Web Presenter, our design goal was to make Internet based broadcasting

andeven calling using video for presentations dramatically easier. Unlike our traditional capture

cards, which are designed for post production, Blackmagic Web Presenter is quite different

because it transforms the SDI and HDMI video inputs into USB video that uses the webcam

driver that’s built into your computer.

What this means is that any SDI or HDMI video source now looks the same as a regular webcam

and any software that works with a webcam will now work with professional broadcast quality

products. With webcam support built into all video streaming and calling software, it means that

you have a very large choice of what streaming platform you can use.

Unlike capture cards that send all the pixels in the video source to the computer, Blackmagic

Web Presenter actually reduces the video resolution down to 720p and can even reduce the

video frame rate down to 20, 15, 10 or 5 frames per second when directed to by the software.

This means you get very high quality HD video in 16:9 aspect ratio, but you also get the lowest

data rate to ensure you can stream video reliably and with regular internetconnections.

But Blackmagic Web Presenter is way more than a USB webcam source for SDI and HDMI

video sources, as it also includes a 2 input live switcher so you can do simple multi camera

broadcasts or presentations. All you need to do is add the optional Teranex Mini SmartPanel

and you can then press the 1 and 2 buttons to live switch between sources. ButtheTeranex

Mini Smart Panel also includes video preview, audio meters, input video standard and USB

frame rate information too!

Please check the support page on our website at www.blackmagicdesign.com for the latest

version of this manual and for updates to your Blackmagic Web Presenter’s internal software.

Also when downloading software, please register with your information so we can keep you

updated when new software is released. We are continually working on new features and

improvements, so we would love to hear from you!

Grant Petty

CEO Blackmagic Design

English

Contents

Blackmagic Web Presenter

Getting Started 5

Plugging in Power 5

Plugging in Video 5

Plugging in Audio 6

Connecting to your Computer 6

Setting Blackmagic Web Presenter as your Webcam 6

Using Blackmagic Web Presenter with Third Party Software 7

Using Blackmagic Web Presenter with Skype 7

Using Blackmagic Web Presenter to Stream with YouTube Live 8

To set your Web Presenter as a new device 8

Setting up a YouTube Live streaming channel 10

Using Teranex Mini Smart Panel 12

Installing Teranex Mini Smart Panel 12

Smart Panel Features 13

Settings 13

Video Input 13

Transition 14

Audio Mixer 15

Setup 17

Changing the Video Input using Switches 17

Teranex Mini Rack Shelf 18

Using the Built in Switcher 18

Using Camera Tally 19

Blackmagic Web Presenter Setup Utility 20

Appendix 22

Help 24

Regulatory Notices and SafetyInformation 25

Warranty 26

Getting Started

Plugging in Power

Getting started with your Blackmagic Web Presenter is quick and easy! All you need to do

isconnect power, connect your video and audio, then connect the unit to your computer.

To supply power, plug a standard IEC power cable into your Blackmagic Web Presenter’s

powerinput on the rear panel. When powered, the status indicator at the bottom right corner

of your Web Presenter’s front panel will illuminate.

Blackmagic Web Presenter supports 12G-SDI and will automatically

switch between SD, HD and Ultra HD all the way up to 2160p60

Connect power to your Blackmagic Web Presenter’s

rearpanel using a standard IEC power cable

Plugging in Video

Next, plug your source video into the Blackmagic Web Presenter’s SDI or HDMI video inputs.

You might notice there are both loop SDI and loop HDMI outputs and you can use these

outputs if you want to connect Web Presenter in line with a video connection to other equipment.

For example, you could loop the SDI output to a deck or monitor or you could connect Web

Presenter in between a computer’s HDMI output and the HDMI input of a video projector.

There is also a program SDI output and this will output video after the SDI and HDMI switch, but

before the down conversion to 720p video. This SDI program output is the same resolution as

the video inputs, so is perfect for connecting to a deck for master recording.

Blackmagic Web Presenter supports 12G-SDI and will automatically switch between SD, HD and

Ultra HD all the way up to 2160p60 when the video input changes. This means you can input

virtually any video signal and it will convert the signal to 720p video for the USB video, which is

both high quality but also very low data rate for streaming video. What this means is you can do

your production in higher resolution 1080 HD or Ultra HD but the web presenter will take care

of lowering the resolution and frame rate for you, all within the single unit.

Web Presenter

Blackmagic

Web Presenter

Blackmagic

LINE/MIC IN

HDMI LOOP OUT

ANALOG AUDIO IN

HDMI IN

SDI IN SDI LOOP OUT

SDI PGM OUT

R

L

STEREO IN

USB WEB CAM

5

Getting Started

Plugging in Audio

The SDI and HDMI inputs include audio, however there are also 2 additional analog audio

inputs. The XLR audio input is a mono input that lets you plug in microphones. It’s a single

channel mono input because microphones are mono and when you connect to this balanced

XLR audio input the audio will be sent to both left and right audio channels internally. The

second analog audio input is a HiFi input using RCA connectors. This input is good for

computer audio or audio from a music source such as smartphone, music player, audio mixer or

even a CD player.

All audio sources will be connected to an internal stereo audio mixer and all blended together.

If you don’t want audio to be included from any specific audio source, then please ensure you

disconnect the analog audio sources, or turn down audio from HDMI sources such as

computers. Otherwise any audio on any of the inputs will be blended together and sent to the

USB audio output.

Connecting to your Computer

Now that you have plugged in your video and audio sources, connect your Blackmagic

WebPresenter to your computer via its USB port. Your computer will instantly recognise the unit

as a USB webcam source.

Connect your Blackmagic Web Presenter to your

computer via the USB port on the rear panel

Setting Blackmagic Web Presenter as your Webcam

Finally, choose your Blackmagic Web Presenter as your webcam using your desired video

conferencing or third party streaming software, such as Skype, Open Broadcaster,

XSplitBroadcaster or Periscope.

For information on using Blackmagic Web Presenter with Skype and YouTube Live, refer to the

‘Using Blackmagic Web Presenter with Skype’ and ‘Using Blackmagic Web Presenter to Stream

with YouTube Live’ sections in this manual.

That’s all there is to getting started! You are now ready to start broadcasting amazing high

quality video with mixed audio online! Please keep reading this manual for more information

such as tally features, changing settings and installing an optional Teranex Mini Smart Panel.

Web Presenter

Blackmagic

LINE/MIC IN

HDMI LOOP OUT

ANALOG AUDIO IN

HDMI IN

SDI IN SDI LOOP OUT

SDI PGM OUT

R

L

STEREO IN

USB WEB CAM

Web Presenter

Blackmagic

LINE/MIC IN

HDMI LOOP OUT

ANALOG AUDIO IN

HDMI IN

SDI IN SDI LOOP OUT

SDI PGM OUT

R

L

STEREO IN

USB WEB CAM

6

Using Blackmagic Web Presenter with Third Party Software

Using Blackmagic Web Presenter

with Third Party Software

Using Blackmagic Web Presenter with Skype

To use Blackmagic Web Presenter with Skype, first download the Skype software and install it

on your computer. The Skype software is free and can be downloaded from www.skype.com

1 Once installed on your computer, launch Skype.

2 Open the preferences under Skype>Preferences and select ‘audio/ video’.

3 If your computer has a webcam it will be selected by default, and the Skype preview

window will show the image from the webcam. By clicking on the ‘Camera’ drop

down menu, you can select Blackmagic Web Presenter from the list. Once selected,

you will see the source video connected to your Web Presenter appear in the Skype

preview window.

Select Blackmagic Web Presenter from

the ‘Camera’ drop down menu

NOTE In Skype’s preferences window, you may noticed that your image is reversed

from left to right. This is normal as Skype presents users with a mirror image of

themselves for preview purposes. Your video calls themselves will not be reversed.

7

Using Blackmagic Web Presenter with Third Party Software

4 In the ‘Microphone’ drop down menu, select Blackmagic Web Presenter

asyouraudio source.

That’s all you need to do, and if you make a Skype call you will be using the source video that

you have connected to Blackmagic Web Presenter.

Using Blackmagic Web Presenter

to Stream with YouTube Live

Open Broadcaster is free software that works very well for streaming to YouTube Live and can

be downloaded from: https://obsproject.com.

To set your Web Presenter as a new device

Once installed on your computer, launch the software.

1 Click on the ‘+’ button in the ‘sources’ box to add a source and select‘videocapture

device’. A pop up dialog box will give you the option to create a new source.

Select ‘video capture device’ from the list of sources and create

a new source for your Blackmagic Web Presenter

NOTE The process of setting up Skype to work with Blackmagic Web Presenter is

thesame on both a Mac OS and Windows computer. For more information refer to the

Skype website: www.skype.com

8

Using Blackmagic Web Presenter with Third Party Software

2 Select ‘create new’ in the pop up dialog box and click ‘ok’.

3 In the properties window for the new device, select your Blackmagic Web Presenter

from the ‘device’ drop down menu and click ‘ok’.

4 Follow the same process for audio. Click on the ‘+’ button in the ‘sources’ box

to add a source and select ‘audio input capture’. Select ‘create new’ in the pop

up dialog box and click ‘ok’. In the properties window for the new device, select

‘BlackmagicWebPresenter’ from the ‘device’ drop down menu and click ‘ok’.

5 Now open the preferences located under OBS>Preferences and click on the

‘video’ tab.

6 Set your base ‘canvas’ resolution to 1280 x 720 and your output ’scaled’ resolution

to1280 x 720, and click ‘ok’. This will allow you to see the input video full screen.

9

Using Blackmagic Web Presenter with Third Party Software

Setting the base ‘canvas’ and ‘scaled’ resolution to 1280 x 720 lets you

view the input video full screen

Setting up a YouTube Live streaming channel

Now you need to create a YouTube live streaming channel. In your browser, go to

www.youtube.com/live_dashboard and sign in or create a new Google account.

1 Select live streaming on the left hand side, and then click ‘get started’.

2 Type in the details about your stream and choose if you would like to make it

a public or a private stream.

10

Using Blackmagic Web Presenter with Third Party Software

3 Click ‘reveal’ at the bottom of the page. Highlight the stream key, right click and select

copy. It’s important to copy this information because in the next step we will paste this

key into the OpenBroadcaster software.

4 In the Open Broadcaster software, go to preferences and select the stream tab. Select

YouTube as your service and paste the stream key into the ‘stream key’ text field.

5 Click the start stream button in the main window of the Open Broadcaster software and

you should now be broadcasting your stream.

6 Back in your web browser, your stream’s status will change to ‘online’ and you can now

see your live stream.

11

Using Teranex Mini Smart Panel

An optional Teranex Mini Smart Panel can be mounted to the front of your Web Presenter,

replacing the original front panel. The Smart Panel buttons allow you to switch sources, together

with a built in LCD so you can monitor the input video and status information, such as the input

video source, video format, plus the USB output frame rate.

Installing Teranex Mini Smart Panel

Installing your optional Smart Panel is easy and because the panels are hot swappable, you

don’t even need to turn off your Blackmagic Web Presenter when installing it.

1 Remove the two M3 screws on each side of your Web Presenter’s basic front panel

using a Pozidriv 2 screwdriver and gently pull the panel away from the front of your

Web Presenter.

2 On the inside of the basic panel, you’ll notice a small clear plastic tube attached to

the bottom corner. This tube directs light from the LED inside the Web Presenter to

illuminate the status indicator on the basic panel. This tube should stay attached to the

basic front panel.

3 Align the connector on the rear of the Smart Panel with the adjoining connector on

the face of your Blackmagic Web Presenter and gently push the Smart Panel towards

the unit until the connectors are firmly seated. The Smart Panel should make a firm

connection and fit neatly inside the face of your Web Presenter.

4 Re-insert the M3 screws from the original panel.

When installing the Teranex Mini Smart Panel to your Blackmagic WebPresenter, holding the panel

with your fingers and thumb positioned above and below the connector will help guide it into place

NOTE The process of setting up the Open Broadcaster software to work with

Blackmagic Web Presenter is the same on both a Mac OS and Windows

computer. Formore information refer to https://obsproject.com.

TIP If reattaching the basic front panel, make sure the light tube is aligned with

the slot in the front of the unit.

1

2

SET

VIDEO

MENU

AUDIO

Video Format

525i59.95 NTSC

Source

HDMI

USB

25 fps

Video Format

525i59.95 NTSC

Source

HDMI

USB

25 fps

12

Settings

If your Blackmagic Web Presenter is installed in a Teranex Mini Rack Shelf, you will need to

remove the Web Presenter from the rack shelf to access the front panel screws. See the ‘Teranex

Mini RackShelf’ section for more information. Your Web Presenter’s USB port is still accessible

with theSmart Panel attached. To access the port, simply open the rubber USB dust cover.

Smart Panel Features

Control Buttons

1 and 2 buttons

When the smart panel is attached, the switching feature is enabled on your Blackmagic Web

Presenter. This means when you are broadcasting, you can press buttons 1 and 2 to switch

between the SDI and HDMI input sources. Pressing ‘1’ will select the SDI input, and pressing ‘2’

will select the HDMI input.

The Teranex Mini Smart Panel enables the switcher feature on your Web Presenter, so you can

press buttons 1 and 2 to live switch between the SDI and HDMI input sources

Settings

When a Teranex Mini Smart Panel is attached to your Web Presenter, you can change settings

such as transition durations, audio mix settings and more. Simply press the ‘menu’ button to

open the settings menu, then use the rotary knob and set button to navigate through the menu

and change a setting.

To move back to the previous menu item, simply press the menu button again. Keep pressing

the menu button to return to the home screen.

Video Input

Your Blackmagic Web Presenter can be set to automatically detect when an input is plugged in

and will set the program output accordingly. You can also set your Web Presenter to use only

the SDI or HDMI input. These settings can also be changed using the built in switches when the

original basic front panel is attached. Refer to the ‘changing the video input using switches’

section for more information.

1 MENU

2 VIDEO

SET AUDIO

Video Format

525i59.94 NTSC

Source

HDMI

USB

30 fps

1 MENU

2 VIDEO

SET AUDIO

Video Format

525i59.94 NTSC

Source

HDMI

USB

30 fps

TIP If you want to change a video setting, you can bypass the main menu and go

straight to the video settings by pressing the ‘video’ button on the front control panel.

13

Settings

Auto

Choose this setting if you want your Web Presenter to automatically select the SDI or

HDMI input when a video source is connected. If both SDI and HDMI video sources are

connected, your Web Presenter will automatically select the SDI input.

SDI

Choose this setting if you want to set your Web Presenter to use only the SDI input.

HDMI

Choose this setting if you want to set your Web Presenter to use only the HDMI input.

Use the video input settings to choose which input

you want to use, or select auto for Blackmagic Web

Presenter to automatically detect the video source

Transition

When switching a live broadcast using the switcher feature in your Blackmagic Web Presenter,

the default transition is a half second cross dissolve, but you can change the duration of the

transition if you want to. You can even set your Web Presenter to use a dip or cut transition!

The transition settings let you choose which

transition type and duration you want to use

TIP If a video signal is received via the video input other than what you have selected,

a black screen will be displayed. Simply select the appropriate input, or set your Web

Presenter to auto.

14

Settings

Cut

To use a straight cut when switching between video sources, select the cut

transition type.

Mix

The mix transition is a cross dissolve. This means one video source will smoothly

transition to the other over a set duration. Change the duration by selecting one of the

mix presets.

Dip

The dip transition is similar to a mix, however, the transition will first smoothly dip to

black, then to the other video source. Choose one of the dip duration presets in the

menu list.

Audio Mixer

The audio mixer settings let you control the mix of your audio. For example, turning the audio

for each input on or off, changing the level of the audio for each input, or setting the XLR input

level to mic or line level audio. Turn the rotary knob clockwise or counterclockwise to adjust

a setting.

Master Level

Turn the rotary knob to increase or decrease the audio level for the program output. This

setting affects the overall volume for the entire master sound mix being broadcasted.

SDI Input Level

Use this setting to adjust the strength of the audio level for the SDI video input.

SDI Input

Turn the rotary knob to set the SDI input audio to on, off, or audio follows video.

ON

When set to ‘on’, audio for the SDI input will always be present in the program audio.

Use the SDI input level setting to increase or decrease the audio level.

OFF

Set the SDI input to ‘off’ if you don’t want audio from the SDI input to be included in the

program audio.

AFV

When set to audio follows video, the audio for the SDI input will only be present in the

master program audio when the SDI video input is switched to the program output.

HDMI Input Level

Lets you adjust the strength of the audio level for the HDMI video input.

TIP If you want to change an audio setting, you can bypass the main menu and go

straight to the audio settings by pressing the ‘audio’ button on the front control panel.

15

Settings

HDMI Input

Turn the rotary knob to set the HDMI input audio to on, off, or audio follows video.

ON

When set to ‘on’, audio for the HDMI input will always be present in the program

audio. Use the HDMI input level setting to increase or decrease the audio level.

OFF

Set the HDMI input to ‘off’ if you don’t want audio from the HDMI input to be included in

the program audio.

AFV

When set to audio follows video, the audio for the HDMI input will only be present in the

master program audio when the HDMI video input is switched to the program output.

XLR Input Level

Lets you adjust the strength of the audio level for the XLR audio input source.

XLR Input

Turns the XLR input audio on or off.

XLR Input Source

Use this setting to set the input source level to mic or line level audio.

The signal strength from a microphone is typically at a lower level compared to levels from

audio playback equipment. To compensate for the lower signal strength, Blackmagic Web

Presenter can be set to ‘mic’ level audio which boosts the input signal. For audio equipment

other than a microphone, set the XLR input level to ‘line’.

RCA Input Level

Adjusts the strength of the audio level for the RCA audio input source.

RCA Input

Turns the RCA input audio on or off.

Turn audio for each input on or off, and

adjust levels using the audio mixer settings

16

Changing the Video Input using Switches

Setup

Use the setup settings to check the software version currently installed on your Web Presenter.

You can also restore your Web Presenter to its default settings.

Software

The software setting lets you check the software version currently installed on your

Blackmagic Web Presenter.

Factory Default

The factory default setting is helpful if you want to start a new project with all the

settings on your Web Presenter set to their original default state.

To reset your Web Presenter:

1 Press the menu button and navigate to the ‘setup’ settings using the rotary knob. Press

‘set’ to enter the menu.

2 Select ‘factory default’ and press the ‘set’ button.

3 Cancel or confirm the reset.

If you confirm the reset, your Web Presenter will now display a ‘resetting’ indicator. When the

reset is complete, the LCD will return to the home screen and all the settings will now be set to

their original default state.

The setup settings can be used to check the software version

currently installed on your Blackmagic Web Presenter, or

resetting your Web Presenter to its original default state

Changing the Video Input using Switches

Your Blackmagic Web Presenter has small switches accessible via the basic front panel that lets

you set the video input to SDI, HDMI or auto. When a Teranex Mini Smart Panel is attached, the

switches are overridden by the smart panel LCD menu settings.

Changing a setting using switches is easy! Simply move the relevant switches up or down to the

on or off position using the tip of a pen. Refer to the switch legend printed on the base of your

Web Presenter to see the correct switch positions for your desired input.

17

Using the Built In Switcher

AUTO

Set switches 1 and 2 to ‘OFF’. Choose this setting if you want your Web Presenter to

automatically select the SDI or HDMI input when a video source is connected. If both

SDI and HDMI video sources are connected, your Web Presenter will automatically

select the SDI input.

SDI

Set switch 2 to ‘OFF’ and 1 to ‘ON’. Choose this setting if you want to set your Web

Presenter to use only the SDI input.

HDMI

Set switch 2 to ‘ON’ and 1 to ‘OFF’. Choose this setting if you want to set your Web

Presenter to use only the HDMI input.

Teranex Mini Rack Shelf

Teranex Mini Rack Shelf is a 1 RU shelf that lets you install your Blackmagic Web Presenter into a

broadcast rack or road case. Your Web Presenter is so small, you can install it next to other

Blackmagic Design equipment that shares a similar form factor, such as Teranex Mini converters,

Blackmagic MultiView 4 and HyperDeck Studio Mini. For example, installing a Blackmagic Web

Presenter together with two HyperDeck Studio Minis gives you one unit to play back your video

sources, and provides another unit for recording the program output from your Web Presenter. This

modular design lets you build your own custom video solutions that are portable and easy to use!

Installing your Blackmagic Web Presenter into a Teranex Mini Rack Shelf is as easy as removing

the unit’s rubber feet, if installed, and fastening the unit to the base of the shelf using the

supplied screws. The Teranex Mini Rack Shelf ships with two original blank panels which you

can use to cover gaps if you don’t need to install additional Blackmagic Design equipment.

For more information check the Blackmagic Design website at www.blackmagicdesign.com.

Teranex Mini Rack Shelf lets you rack mount your Blackmagic Web Presenter

with other Blackmagic Design equipment that shares the same form factor,

such as Teranex Mini Converters and HyperDeck Studio Mini

Using the Built in Switcher

Blackmagic Web Presenter features a built in 2 input live switcher. However, to take advantage

of this feature you need to install the Teranex Mini Smart Panel. This panel adds an LCD screen

and pushbutton controls that you can use to control the built in switcher. Once the Teranex Mini

Smart Panel is installed, the switcher feature will be enabled.

When both SDI and HDMI video sources are connected, the HDMI input will be resynchronized

so that both inputs can be transitioned without glitches. This is what makes the Web Presenter

able to do live switching.

To operate the built in switcher, simply press the 1 on the front panel to select SDI as the video

source or the button marked 2 to select the HDMI video source. Once selected, the Web

Presenter will perform a transition. You could connect a computer with a slide show to the HDMI

Web Presenter

Blackmagic

18

Using Camera Tally

input and a camera to the SDI source and do very professional live presentation shows for your

audience, simply by switching using the 1 and 2 buttons. You can also confirm the current input,

the video preview and audio levels on the LCD screen.

When switching a live broadcast using Blackmagic WebPresenter with a Teranex Mini Smart

Panel attached, press the 1 and2buttons to switch between the SDI and HDMI inputs

Using Camera Tally

Blackmagic Design studio cameras and ATEM switchers include a tally feature where the tally

information is sent from the switcher to the camera via the program return feed from the

switcher to the camera. Your Blackmagic Web Presenter also includes this tally feature so you

can see which camera is “on air” when you are using the switcher feature on the web presenter.

Using tally is quite simple and all you need to do is connect the SDI output of a Blackmagic

Design Studio Camera to your web presenter as an SDI video source and then connect the

program output of the web presenter back to the camera progam SDI input. Now when you

select the program button on the camera you can see the web presenter’s program video on the

camera. But what’s even more exciting is the tally information is now being sent to the camera.

The SDI video input is tally “camera 1” and the HDMI input is tagged as “camera 2”. So what this

means is that in your camera’s settings, you will need to set the camera number. In this case we

are using the SDI input for the camera, then the camera should be set to camera 1. Once this

has been set, and you press the 1 button on the front panel of the web presenter, you should

see the tally illuminate on the camera.

Set the camera number to ‘1’ for Blackmagic Studio Camera

connected via SDI in the ‘studio’ tab of the LCD menu

1 MENU

2 VIDEO

SET AUDIO

Video Format

525i59.94 NTSC

Source

HDMI

USB

30 fps

1 MENU

2 VIDEO

SET AUDIO

Video Format

525i59.94 NTSC

Source

HDMI

USB

30 fps

NOTE The default transition is a half second mix, however, if you have a Teranex Mini

Smart Panel attached, you can choose a different duration or transition type in the LCD

menu Transition settings. For more information, refer to the ‘Settings’ section in this manual.

19

Blackmagic Web Presenter Setup Utility

Set the camera number to ‘1’ for Blackmagic URSA Mini

connected via SDI in the ‘setup’ tab of the LCD menu

If you are doing a presentation, it can be extremely helpful for the presenter to see a nice

clearred tally indicator on the camera they are using when they are on air. This makes it easy

for them to know when they are live. Imagine having a Blackmagic URSA Mini with

BlackmagicURSA Studio Viewfinder combination and the presenter can see that big red tally

indicator when they are on air. It’s a very powerful combination!

The tally feature is supported on Blackmagic Studio Camera, Blackmagic Micro Studio Camera

and Blackmagic URSA Mini models of cameras. For more details on setting up tally, refer to the

‘Backmagic URSA and URSA Mini’ and ‘Blackmagic Studio Camera’ manuals which can be

downloaded from www.blackmagicdesign.com/support

Blackmagic Web Presenter Setup Utility

Occasionally, updates for your Blackmagic Web Presenter’s internal software will be available

on the Blackmagic Design website. Updates are installed on your Web Presenter via the

Blackmagic Web Presenter Setup utility. We recommend downloading the setup utility and

updating your Web Presenter so you can benefit from new features and improvements.

To update the internal software using Mac OS:

1 Download and unzip Blackmagic Web Presenter Setup.

2 Open the resulting disk image and launch the Blackmagic Web Presenter Setup

Installer.

Follow the onscreen instructions.

3 After installation, connect your Web Presenter to the computer via the USB connector

on the front panel. Lift open the plastic dust cover to access the USB connector.

4 Launch Blackmagic Web Presenter Setup and follow any onscreen prompt to update

the internal software. If no prompt appears, the internal software is up to date and there

is nothing further you need to do.

20

ページを読み込んでいます...

Blackmagicdesign Web Presenter Streamer 取扱説明書

このマニュアルは次のような方にも適しています

Blackmagicdesign Web Presenter Streamer 取扱説明書

他の言語で

その他の書類