MODEL
For household use
MCT-A
Stainless Steel Mug
Thank you for purchasing a “TIGER” Stainless Steel Mug.
Please read the instructions completely before use.
Keep these instructions for future reference.
Instructions
*Make sure that all parts are present before use.
Automatic lock
When the lid is closed, it locks
automatically.
Lid gasket
Lid
Button
Stopper
gasket
Body
Stopper
Button
Spout
TIGER CORPORATION HONG KONG LIMITED
TIGER CORPORATION U.S.A.
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912
URL : http://tiger-corporation.hk/
URL : https://tiger-corporation-us.com
Fax: (852) 2418-0911
1815 W 205th Street, Unit 106, Torrance, CA 90501
Tel: 1-866-55-TIGER (84437)
Email: [email protected]
MCT-A
Specifications
Before Contacting Customer Service
Replacing and Purchasing Consumable Parts
For the purpose of performance improvement, designs, specifications and parts shown in this
publication are subject to change without notice.
The gasket and stopper are consumable parts. Check once a year for damage/deterioration. If
heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where you purchased this product.
The utmost measures have been taken to ensure the quality of this product. However, should the
product be defective, contact your dealer and provide the following information.
1. Product name 2. Model Number (bottom of the product)
3. Description of trouble (As detailed as possible) 4. Purchase date
Feel free to send any questions or comments about this product to the shop where you purchased it.
Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C / 203°F±2°F
and leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 1hour or 6hours.
Cold retention has been calculated under the condition of adding cold water at 4°C ±1°C / 39°F±2°F and
leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 6hours.
Capacity is the actual volume of water that can be stored in the product when the stopper is closed. This
is not the “Maximum level” volume described in “Safety Precautions”.
Weight
Size
Approximate value
Model No.
Capacity
Heat retention (1 hour)
Cold retention (6 hours) Less than 9°C / 49°F
Greater than 85°C / 185°F
0.35 L / 11.8 oz
MCT-A035
W 6.6 x D 7.0 x H 18.0 cm
W 2.60 x D 2.76 x H 7.09 inch
0.17kg / 0.37 lbs
Less than 8°C / 47°F
Greater than 86°C / 186°F
0.50 L / 16.9 oz
MCT-A050
W 6.6 x D 7.0 x H 23.1 cm
W 2.60 x D 2.76 x H 9.09 inch
0.21kg / 0.46 lbs
(6 hours) Greater than 63°C / 145°F Greater than 69°C / 156°F
MCT-A
不銹鋼保溫保冷杯
使用說明
書
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
0.35L
0.17kg
0.50L
0.21kg
MCT-A
1 2
This symbol indicates a prohibited action.This symbol indicates an action that must be
taken or an instruction that must be followed.
Warning
Caution
Description of Symbols
Caution
Warning
This symbol indicates there is a
possibility of death or serious injury.
Caution
This symbol indicates there is a
possibility of injury or damage to property.
Approx. 1cm
1/2inch
Safety Precautions
Keep out of reach of children. Do not let children play
with the product.
There is a risk of burns or injuries.
Do not put dry ice or carbonated beverages in the product.
The air pressure inside the product may increase, causing the stopper and lid to become stuck
or prone to shattering, or the parts to be damaged.
Be sure to set the stopper in proper position.
Contents may leak and cause soiling or skin burns.
Do not store milk, dairy products, or certain fruit juices in the product.
The contents may decay or spoil. Long-time spoilage can create gases that raise the air pressure
inside the product due to decay or spoil, causing the stopper and lid to become stuck or prone to
shattering, or the parts to be damaged, and result in scattering of fragments.
Do not touch the brim of the product with a kettle spout.
The product may fall over, causing burns or injuries to the skin, or a scratch or deformation to the
product.
Do not place the product near stoves, open flames, or other sources of extreme
heat.
There is a risk of burns or deformation or discoloring of the product.
Do not use the product in a moving vehicle.
This may result in burns or soiling of clothes or of the interior of the vehicle. (Using the product
while you are driving is very dangerous, as you may be distracted.)
Do not open the lid if the product is tilted or placed near your face when it
contains a hot beverage.
This may cause the internal air pressure of the product to increase and the contents to burst out
and scatter, potentially causing burns.
Drink slowly and do not tilt the product abruptly when the product contains a hot
beverage.
Do not tilt the product abruptly. This may cause the contents to burst out, potentially causing burns.
Be sure to fill the product with drink below the maximum level shown in the
diagram.
If the contents exceed the specified line, they may
leak or overflow, potentially causing burns.
Do not use the product if its ability to retain heat declines.
Hot beverages can make the product very hot, potentially causing burns.
Do not knock over, drop or expose the product to excessive shocks.
There is a risk of damage to the product, a reduction of its heat- or cold-retention ability, rusting,
flaking of the exterior paint, or leakage of contents.
Do not use the product for any purpose other than keeping beverages warm or
cold for drinking.
Do not disassemble or attempt to repair the product by yourself.
There is a risk of failure or accident. The contents may leak.
Do not put the product in a freezer.
Contents may leak or the product may be damaged.
Do not store tea leaves or peeled fruit.
They may clog the spout, resulting in leakage of the contents.
Do not heat the product in a microwave oven.
There is a risk of injury or failure due to sparks.
Be sure to follow all instructions.
All safety instructions described below are intended to protect the user and other individuals
from physical harm and household damage.
Safety instructions are classified and described according to the level of harm and damage
caused by improper use, as shown below.
Do not remove the caution sticker on the product.
Maximum level
(slightly less)
Beverage
1
2
警 告
可能會導致死亡或重傷的內容。
不可實施的“禁止”內容。 必須執行的“指示”內容。
注意 可能會造成使用者受害或財物受損的
內容。
警 告
注意
所用圖形符號的說明
注意
安全注意事項 請務必遵守
請勿置放於幼兒易拿取的地方。注意不要讓孩童玩耍或使用。
否則可能導致燙傷或受傷等。
請勿裝入乾冰·碳酸飲料等。
可能發生內壓上升、中栓或杯蓋打不開、杯中液體噴出、零件受損的情況，導致受傷等。
請確認中栓已拴緊。
否則可能導致杯中液體滲漏，造成燙傷或弄髒其他物品。
請勿裝入牛乳·乳製飲料·果汁等。
否則會導致液體腐壞、變質。外，長時間放置時，液體的腐壞、變質會導致氣體產生而使本
體
內壓上升，可能會有打不開中栓或杯蓋、杯中液體噴出、零件受損飛散等危險
。
◆ 以下說明了為防止對使用者或他人造成人身傷害或財產損害而必須遵守的事項。
◆ 關於因操作錯誤而導致的危害及損害的程度，按以下分類進行說明。
注水時，請勿讓水壺等容器抵住本體的肩部。
否則可能使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿置放於瓦斯爐火及暖爐等火源高溫處。
否則會導致燙傷，本體變形、變色。
汽車行駛中請勿使用。
否則可能導致燙傷或車內、衣服被弄髒。（如果是駕駛員，會分散開車時的注意力，非常危
險。）
在已裝入熱飲時，請勿於傾斜狀態下或靠近臉部的狀態下打開中栓的蓋子。
否則可能導致本體內壓上升、熱飲急速噴出或飛濺而造成燙傷等。
飲用熱飲時，請注意避免突然傾斜本體，並慢慢飲用。
如果突然傾斜杯體，杯中飲料會急速流出，可能導致燙傷等。
飲料食物的量，請加至圖示所標記位置。
若裝入過多的飲料，可能導致滲漏、溢出，造成燙傷。
當此產品的保溫效能失效，請勿繼續使用。
裝入熱的飲品食物，會使本體變熱，有可能造成燙傷的危險性。
請勿翻倒、摔落地面或撞擊等強烈衝擊。
否則可能導致杯體破損、保溫（保冷）效果失效、生銹、塗層剝落、杯中液體滲漏。
請勿使用於飲品保溫·保冷以外之用途。
請勿自行拆解或修理。
否則會導致故障、事故。以免內容物漏出。
請勿將保溫保冷杯放入冷凍室內。
否則可能導致杯中液體滲漏或杯體破損。
請勿將茶葉、果肉等裝入杯中。
否則可能導致滲漏。
請勿使用微波爐加熱。
會造成火花飛濺，導致受傷和設備故障。
請勿撕下貼在本體上的相關注意事項貼紙。
滿水位容量
（略少容量）
飲料
約 �cm( 公分 )
1 2
This symbol indicates a prohibited action.This symbol indicates an action that must be
taken or an instruction that must befollowed.
Warning
Caution
Description of Symbols
Caution
Warning
This symbol indicates there is a
possibilityof death or serious injury.
Caution
This symbol indicates there is a
possibility of injury or damage to property.
Approx. 1cm
1/2inch
Safety Precautions
Keep out of reach of children. Do not let children play
with the product.
There is a risk of burns or injuries.
Do not put dry ice or carbonated beverages inthe product.
The air pressure inside the product may increase, causing the stopper and lid to become stuck
or prone to shattering, or the parts to be damaged.
Be sure to set the stopper in proper position.
Contents may leak and cause soiling or skin burns.
Do not store milk, dairy products, or certain fruit juices in the product.
The contents may decay or spoil. Long-time spoilage can create gases that raise the air pressure
inside the product due to decay or spoil, causing the stopper and lid to become stuck or prone to
shattering, or the parts to be damaged, and result in scattering of fragments.
Do not touch the brim of the product with a kettle spout.
The product may fall over, causing burns or injuries to the skin, or a scratch or deformation to the
product.
Do not place the product near stoves, open flames, or other sources ofextreme
heat.
There is a risk of burns or deformation or discoloring of the product.
Do not use the product in a moving vehicle.
This may result in burns or soiling of clothes or of the interior of the vehicle. (Using the product
while you are driving is very dangerous, as you may be distracted.)
Do not open the lid if the product is tilted or placed near your face when it
contains a hot beverage.
This may cause the internal air pressure of the product to increase and the contents to burst out
and scatter, potentially causing burns.
Drink slowly and do not tilt the product abruptly when the product contains a hot
beverage.
Do not tilt the product abruptly. This may cause the contents to burst out, potentially causing burns.
Be sure to fill the product with drink below the maximum level shown in the
diagram.
If the contents exceed the specified line, they may
leak or overflow, potentially causing burns.
Do not use the product if its ability to retain heat declines.
Hot beverages can make the product very hot, potentially causing burns.
Do not knock over, drop or expose the product to excessive shocks.
There is a risk of damage to the product, a reduction of its heat- or cold-retention ability, rusting,
flaking of the exterior paint, or leakage of contents.
Do not use the product for any purpose other than keeping beverages warm or
cold for drinking.
Do not disassemble or attempt to repair the product by yourself.
There is a risk of failure or accident. The contents may leak.
Do not put the product in a freezer.
Contents may leak or the product may be damaged.
Do not store tea leaves or peeled fruit.
They may clog the spout, resulting in leakage of the contents.
Do not heat the product in a microwave oven.
There is a risk of injury or failure due to sparks.
Be sure to follow all instructions.
All safety instructions described below are intended to protect the user and other individuals
from physical harm and household damage.
Safety instructions are classified and described according to the level of harm and damage
caused by improper use, as shown below.
Do not remove the caution sticker on the product.
Maximum level
(slightly less)
Beverage
1
2
警告
可能會導致死亡或重傷的內容。
不可實施的“禁止”內容。 必須執行的“指示”內容。
注意 可能會造成使用者受害或財物受損的
內容。
警告
注意
所用圖形符號的說明
注意
安全注意事項 請務必遵守
請勿置放於幼兒易拿取的地方。注意不要讓孩童玩耍或使用。
否則可能導致燙傷或受傷等。
請勿裝入乾冰·碳酸飲料等。
可能發生內壓上升、中栓或杯蓋打不開、杯中液體噴出、零件受損的情況，導致受傷等。
請確認中栓已拴緊。
否則可能導致杯中液體滲漏，造成燙傷或弄髒其他物品。
請勿裝入牛乳·乳製飲料·果汁等。
否則會導致液體腐壞、變質。外，長時間放置時，液體的腐壞、變質會導致氣體產生而使本體
內壓上升，可能會有打不開中栓或杯蓋、杯中液體噴出、零件受損飛散等危險。
◆ 以下說明了為防止對使用者或他人造成人身傷害或財產損害而必須遵守的事項。
◆ 關於因操作錯誤而導致的危害及損害的程度，按以下分類進行說明。
注水時，請勿讓水壺等容器抵住本體的肩部。
否則可能使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿置放於瓦斯爐火及暖爐等火源高溫處。
否則會導致燙傷，本體變形、變色。
汽車行駛中請勿使用。
否則可能導致燙傷或車內、衣服被弄髒
。（如果是駕駛員，會分散開車時的注意力，非常危
險。）
在已裝入熱飲時，請勿於傾斜狀態下或靠近臉部的狀態下打開中栓的蓋子。
否則可能導致本體內壓上升、熱飲急速噴出或飛濺而造成燙傷等。
飲用熱飲時，請注意避免突然傾斜本體，並慢慢飲用。
如果突然傾斜杯體，杯中飲料會急速流出，可能導致燙傷等。
飲料食物的量，請加至圖示所標記位置。
若裝入過多的飲料，可能導致滲漏、溢出，造成燙傷。
當此產品的保溫效能失效，請勿繼續使用。
裝入熱的飲品食物，會使本體變熱，有可能造成燙傷的危險性。
請勿翻倒、摔落地面或撞擊等強烈衝擊。
否則可能導致杯體破損、保溫（保冷）效果失效、生銹、塗層剝落、杯中液體滲漏。
請勿使用於飲品保溫·保冷以外之用途。
請勿自行拆解或修理。
否則會導致故障、事故。以免內容物漏出。
請勿將保溫保冷杯放入冷凍室內。
否則可能導致杯中液體滲漏或杯體破損。
請勿將茶葉、果肉等裝入杯中。
否則可能導致滲漏。
請勿使用微波爐加熱。
會造成火花飛濺，導致受傷和設備故障。
請勿撕下貼在本體上的相關注意事項貼紙。
滿水位容量
（略少容量）
飲料
約 �cm( 公分 )
3 4
Caution
How to Use
Before using the can holder, check its intensity.
If the holder is not strong enough, it may come off and get damaged. This may result in burns or
soiling of clothes or of the interior of the vehicle.
When using a commercially available can holder, use the stationary type.
If the suspension holder that is attached to the window or air conditioning outlet is used, it may
come off. This may result in burns or soiling of clothes or of the interior of the vehicle.
For can holder
Be sure to clean the product immediately after use, especially after consuming
sports drinks.
Rinse the inside of the product well, even if you are going out, for example, and don’t have time
to wash it thoroughly. Mold, rust, or holes may appear.
Do not store soups or beverages containing salt in the product.
The product may become decayed, spoiled, or rusted.
Do not leave the product in a bag for a long time.
The storage conditions may change and there is a risk of rust or odors.
Do not place the product in a bag if its exterior is wet.
There is a risk of rust, odor, or soiling.
Do not pour the beverage into the bottle while the stopper is set.
The contents may leak or the product may fall over, causing burns or injuries to the skin. The
product may also be scratched or deformed.
Do not use chlorine-based bleaches.
This may cause rusting, flaking of the exterior paint, or a hole on the product.
Do not scrape or rub the patterns, and stickers on the surface of the product
using your nails or a hard object.
The exterior paint may come off.
Be sure to wipe spilled beverage on spout.
The contents may leak when the lid is closed.
(1) Check that the lid gasket and stopper gasket are attached to the stopper.
(2) Pour hot water into the body and securely close the stopper and lid.
(3) Hold the body and gently shake it several times to rinse the inside thoroughly. (Do not
shake it excessively. The hot water may splash out, potentially causing burns.)
(4) Discard the hot water, and then clean each part.
Turn the stopper to remove it.
To keep your beverage warm/cool longer, first pour a small amount of
hot/cold water into the main body and let it sit for one or two minutes.
Pour your hot/cold beverage into the main body.
Place the main body in an upright position and turn the stopper to
close it.
Pour appropriate amount of beverages.
Push the button to open the lid, and then drink the beverage.
1
2
3
4
5
Before the first use
Check that the lid gasket, stopper gasket and spoutare attached to the stopper.
Discard the hot/cold water after preheating/precooling.
Do not insert large cubes of ice. Use small cubes or crushed ice.
Turn the stopper as far as it will go to securely close it.
Do not push the button while tilting the body. Liquid may splash out of the
bottle.
Do not tilt the body immediately after pouring in a hot beverage and closing the lid.
The contents may leak.
Cleaning
You may notice an unusual odor coming from the material of the product.
In this case, clean the product by following the steps below.
CautionCaution
ButtonLid
Spout
Slide the
button
down.
Push the bottom of
the button while
holding it down.
3
4
注意
使用方法
使用杯架時，請事先確認強度後再使用。
強度不足時，杯架可能會鬆脫、破損，進而導致燙傷或車內、衣服被弄髒。
市售的杯架請使用固定放置型。
如果使用安裝在車窗或空調出風口的吊掛型杯架，杯架可能會鬆脫，進而導致燙傷或車內、
衣
服被弄髒。
使用杯架時
若裝入運動飲料，飲用完畢後請儘速清洗。
外出等情況下，即使無法充分清洗，也請立即用水沖洗本體內側。否則可能導致發霉、生銹
、
孔蝕等故障。
請勿裝入味噌湯或濃湯等含有鹽分的湯汁。
否則可能導致液體腐壞、變質、生銹。
請勿將本產品長時間放置於包包或袋子中。
受周圍環境（濕度、鹽分）等的影響，可能導致保溫保冷杯生銹、產生異味。
本體外側潮濕的狀態下，請勿放入提袋等。
否則可能導致保溫保冷杯生銹、產生異味或弄髒其他物品。
請勿在中栓已設置好的狀態下倒入飲品。
否則可能會使內容物漏出、使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿使用含氯漂白劑。
否則可能導致保溫保冷杯生銹、塗層剝落、孔蝕。
請勿用指甲或硬物刮擦本體的花紋、和貼紙。
否則可能導致花紋、貼紙剝落。
請將杯口殘留的飲品擦拭乾淨。
關上中栓的時候可能會漏出。
➀確認有附上墊圈。
➁在本體裡裝入熱水，並確實擰緊杯蓋。
➂握住本體，重複數次徹底沖洗內側的動作。（切勿施加強烈振動。以免熱水噴出造成
燙傷。）
➃倒掉熱水，對各部分進行清潔保養。
● 確認杯蓋墊圈、栓體墊圈、飲用口附在中栓上。
● 預熱（預冷）後，倒掉熱水（冷水）。
請勿裝入過多(量)飲品。
● 在放入大的冰塊時，請不要整個塞入，請先將其分成小塊再放入。
● 將中栓擰緊到不能旋轉為止，確認其已擰緊。
1
2
3
4
5
● 請勿在本體傾倒的狀態下按下按鈕。否則熱飲可能會一口氣流出來。
● 將熱飲倒入本體並緊中栓後，請勿讓本體傾倒。以免內容物漏出。
有時會散發產品材料特有的氣味。
此時請按照以下步驟清潔保養。
請注意請注意
按鈕
➀ 將按鈕
往下押
➁ 在將按鈕往下押的
狀態下向前推按鈕下方
杯蓋
飲用口
3
4
注意
使用方法
使用杯架時，請事先確認強度後再使用。
強度不足時，杯架可能會鬆脫、破損，進而導致燙傷或車內、衣服被弄髒。
市售的杯架請使用固定放置型。
如果使用安裝在車窗或空調出風口的吊掛型杯架，杯架可能會鬆脫，進而導致燙傷或車內、衣
服被弄髒。
使用杯架時
若裝入運動飲料，飲用完畢後請儘速清洗。
外出等情況下，即使無法充分清洗，也請立即用水沖洗本體內側。否則可能導致發霉、生銹、
孔蝕等故障。
請勿裝入味噌湯或濃湯等含有鹽分的湯汁。
否則可能導致液體腐壞、變質、生銹。
請勿將本產品長時間放置於包包或袋子中。
受周圍環境（濕度、鹽分）等的影響，可能導致保溫保冷杯生銹、產生異味。
本體外側潮濕的狀態下，請勿放入提袋等。
否則可能導致保溫保冷杯生銹、產生異味或弄髒其他物品。
請勿在中栓已設置好的狀態下倒入飲品。
否則可能會使內容物漏出、使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿使用含氯漂白劑。
否則可能導致保溫保冷杯生銹、塗層剝落、孔蝕。
請勿用指甲或硬物刮擦本體的花紋、和貼紙。
否則可能導致花紋、貼紙剝落。
請將杯口殘留的飲品擦拭乾淨。
關上中栓的時候可能會漏出。
➀確認有附上墊圈。
➁在本體裡裝入熱水，並確實擰緊杯蓋。
➂握住本體，重複數次徹底沖洗內側的動作。（切勿施加強烈振動。以免熱水噴出造成
燙傷。）
➃倒掉熱水，對各部分進行清潔保養。
● 確認杯蓋墊圈、栓體墊圈、飲用口附在中栓上。
● 預熱（預冷）後，倒掉熱水（冷水）。
請勿裝入過多(量)飲品。
● 在放入大的冰塊時，請不要整個塞入，請先將其分成小塊再放入。
● 將中栓擰緊到不能旋轉為止，確認其已擰緊。
1
2
3
4
5
● 請勿在本體傾倒的狀態下按下按鈕。否則熱飲可能會一口氣流出來。
● 將熱飲倒入本體並緊中栓後，請勿讓本體傾倒。以免內容物漏出。
有時會散發產品材料特有的氣味。
此時請按照以下步驟清潔保養。
請注意請注意
按鈕
➀ 將按鈕
往下押
➁ 在將按鈕往下押的
狀態下向前推按鈕下方
杯蓋
飲用口
3 4
Caution
How to Use
Before using the can holder, check its intensity.
If the holder is not strong enough, it may come off and get damaged. This may result in burns or
soiling of clothes or of the interior of the vehicle.
When using a commercially available can holder, use the stationary type.
If the suspension holder that is attached to the window or air conditioning outlet is used, it may
come off. This may result in burns or soiling of clothes or of the interior of the vehicle.
For can holder
Be sure to clean the product immediately after use, especially after consuming
sports drinks.
Rinse the inside of the product well, even if you are going out, for example, and don’t have time
to wash it thoroughly. Mold, rust, or holes may appear.
Do not store soups or beverages containing salt in the product.
The product may become decayed, spoiled, or rusted.
Do not leave the product in a bag for a long time.
The storage conditions may change and there is a risk of rust or odors.
Do not place the product in a bag if its exterior is wet.
There is a risk of rust, odor, or soiling.
Do not pour the beverage into the bottle while the stopper is set.
The contents may leak or the product may fall over, causing burns or injuries to the skin. The
product may also be scratched or deformed.
Do not use chlorine-based bleaches.
This may cause rusting, flaking of the exterior paint, or a hole on the product.
Do not scrape or rub the patterns, and stickers on the surface of the product
using your nails or a hard object.
The exterior paint may come off.
Be sure to wipe spilled beverage on spout.
The contents may leak when the lid is closed.
(1) Check that the lid gasket and stopper gasket are attached to the stopper.
(2) Pour hot water into the body and securely close the stopper and lid.
(3) Hold the body and gently shake it several times to rinse the inside thoroughly. (Do not
shake it excessively. The hot water may splash out, potentially causing burns.)
(4) Discard the hot water, and then clean each part.
Turn the stopper to remove it.
To keep your beverage warm/cool longer, first pour a small amount of
hot/cold water into the main body and let it sit for one or two minutes.
Pour your hot/cold beverage into the main body.
Place the main body in an upright position and turn the stopper to
close it.
Pour appropriate amount of beverages.
Push the button to open the lid, and then drink the beverage.
1
2
3
4
5
Before the first use
Check that the lid gasket, stopper gasket and spoutare attached to the stopper.
Discard the hot/cold water after preheating/precooling.
Do not insert large cubes of ice. Use small cubes or crushed ice.
Turn the stopper as far as it will go to securely close it.
Do not push the button while tilting the body. Liquid may splash out of the
bottle.
Do not tilt the body immediately after pouring in a hot beverage and closing the lid.
The contents may leak.
Cleaning
You may notice an unusual odor coming from the material of the product.
In this case, clean the product by following the steps below.
CautionCaution
ButtonLid
Spout
Slide the
button
down.
Push the bottom of
the button while
holding it down.
5
6
清潔保養的方法
墊圈有異味時
飲用完後，使本體保持豎直狀態，
確實擰緊杯蓋。
墊圈拆卸方法·安裝方法
杯蓋墊圈拆卸方法·安裝方法
拆卸方法 安裝方法
·安裝方法
拆卸方法 安裝方法
栓體墊圈拆卸方法·安裝方法
本體內側的髒污變得很明顯時･･･
6
請注意請注意
請注意請注意
請注意請注意
飲用口拆卸方法
5 6
Clean the product on the same day after every use.
Use mild kitchen detergent (for table or cookware).
Use a soft sponge or cloth.
Clean the product thoroughly to prevent any odor.
How to Clean
If an odor remains on the gasket
Depending on the contents, the odor may remain on the gasket. In this case, leave the
gasket in boiling water for approximately 30 minutes to reduce the odor. If the odor is
still noticeable, purchase a new gasket (sold as an optional part).
After drinking the beverage, keep
(1)Wash each part using a sponge with diluted detergent water or lukewarm water, and
then thoroughly rinse it with water.
(2)Wipe the water off with a dry cloth and dry the parts thoroughly.
Attaching and Removing the gasket
If marks start to become visible on the inside of the main body
Such staining can be caused by minerals in water, such as calcium, magnesium, and iron. It is
recommended to clean them with citric acid, which is available at supermarkets and drug stores.
(1) Dilute the citric acid (approximately 10 g) in lukewarm water, and then pour it into the main body.
(2)
After a few hours have elapsed, wash the main body with a soft brush and then thoroughly rinse it.
(3) Dry the main body completely.
Note: Do not use detergents for other brands’ pots or insulated bottles. The gasket may be broken.
For red, rust-like spots or rough areas
6
Make sure the product does not suffer any strong impact while carrying it.
The lid may open.
If you place the product in a bag, make sure it is upright to prevent any accidental
leakage. The product may leak if you place it on its side.
If you place the product in a bag, make sure the button keeps away from bag
contents. The lid may open.
Do not soak the body when washing them. (Water may enter.)
After washing the whole body, immediately use a dry cloth to wipe off the moisture on
its outer surface. Not wiping off all droplets could leave water stains or cause rust and
other marks.
Do not use thinners, cleansers, bleaches, cleaning wipes, metallic scrubbing brushes,
or nylon scrubbing brushes.
Do not use a dishwasher or dish dryer, and do not wash with boiling water. (Except
gasket)
Be sure to attach the gaskets and spout.
Dry the body and lid completely after removing stains when not in use for a long time.
Do not attach the gasket in the incorrect place or direction. The contents
may leak.
Attaching and Removing the lid gasket
To remove To attach
Attaching and Removing the spout
To remove To attach
Slowly remove the lid
gasket while holding
and turning it.
When attaching the
lid gasket, make
sure to fit it
completely in the
proper direction.
Push the hinge
side slowly to
remove.
Spout can not
be removed,
even if its front
side is puhed.
After fitting the
front side of
spout, set the
hinge side.
Make sure the
spout is fixed.
Attaching and removing the stopper gasket
Slowly remove the stopper gasket while holding its edge.
When attaching the stopper gasket, make sure to fit it completely in the proper direction.
CautionCaution
CautionCaution
CautionCaution
the product in an upright position
and securely close the lid.
Securely close the lid to
fix the automatic lock.
Button
Lid
Lid gasket
Spout Hinge
Spout
Spout
Spout
Stopper gasket
Automatic lock
When the lid is
closed, the button
automatically
moves to the
lock (up) position.
5
6
清潔保養的方法
墊圈有異味時
飲用完後，使本體保持豎直狀態，
確實擰緊杯蓋。
墊圈拆卸方法·安裝方法
杯蓋墊圈拆卸方法
·安裝方法
拆卸方法 安裝方法
·安裝方法
拆卸方法 安裝方法
栓體墊圈拆卸方法
·安裝方法
本體內側的髒污變得很明顯時･･･
6
請注意請注意
請注意請注意
請注意請注意
飲用口拆卸方法
5 6
Clean the product on the same day after every use.
Use mild kitchen detergent (for table or cookware).
Use a soft sponge or cloth.
Clean the product thoroughly to prevent any odor.
How to Clean
If an odor remains on the gasket
Depending on the contents, the odor may remain on the gasket. In this case, leave the
gasket in boiling water for approximately 30 minutes to reduce the odor. If the odor is
still noticeable, purchase a new gasket (sold as an optional part).
After drinking the beverage, keep
(1)Wash each part using a sponge with diluted detergent water or lukewarm water, and
then thoroughly rinse it with water.
(2)Wipe the water off with a dry cloth and dry the parts thoroughly.
Attaching and Removing the gasket
If marks start to become visible on the inside of the main body
Such staining can be caused by minerals in water, such as calcium, magnesium, and iron. It is
recommended to clean them with citric acid, which is available at supermarkets and drug stores.
(1) Dilute the citric acid (approximately 10 g) in lukewarm water, and then pour it into the main body.
(2)
After a few hours have elapsed, wash the main body with a soft brush and then thoroughly rinse it.
(3) Dry the main body completely.
Note: Do not use detergents for other brands’ pots or insulated bottles. The gasket may be broken.
For red, rust-like spots or rough areas
6
Make sure the product does not suffer any strong impact while carrying it.
The lid may open.
If you place the product in a bag, make sure it is upright to prevent any accidental
leakage. The product may leak if you place it on its side.
If you place the product in a bag, make sure the button keeps away from bag
contents. The lid may open.
Do not soak the body when washing them. (Water may enter.)
After washing the whole body, immediately use a dry cloth to wipe off the moisture on
its outer surface. Not wiping off all droplets could leave water stains or cause rust and
other marks.
Do not use thinners, cleansers, bleaches, cleaning wipes, metallic scrubbing brushes,
or nylon scrubbing brushes.
Do not use a dishwasher or dish dryer, and do not wash with boiling water. (Except
gasket)
Be sure to attach the gaskets and spout.
Dry the body and lid completely after removing stains when not in use for a long time.
Do not attach the gasket in the incorrect place or direction. The contents
may leak.
Attaching and Removing the lid gasket
To remove To attach
Attaching and Removing the spout
To remove To attach
Slowly remove the lid
gasket while holding
and turning it.
When attaching the
lid gasket, make
sure to fit it
completely in the
proper direction.
Push the hinge
side slowly to
remove.
Spout can not
be removed,
even if its front
side is puhed.
After fitting the
front side of
spout, set the
hinge side.
Make sure the
spout is fixed.
Attaching and removing the stopper gasket
Slowly remove the stopper gasket while holding its edge.
When attaching the stopper gasket, make sure to fit it completely in the proper direction.
CautionCaution
CautionCaution
CautionCaution
the product in an upright position
and securely close the lid.
Securely close the lid to
fix the automatic lock.
Button
Lid
Lid gasket
Spout Hinge
Spout
Spout
Spout
Stopper gasket
Automatic lock
When the lid is
closed, the button
automatically
moves to the
lock (up) position.
MCT-A
不銹鋼保溫保冷杯
使用說明書
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
0.35L
0.17kg
0.50L
0.21kg
MCT-A
真 31
:+81(6)6906-2124
虎記股份有限公司
0800-888-572
(02) 23971179
(06) 2200855
(07) 7161460
(06) 2655899
(04) 23754627
https://www.tiger-corporation.tw/
MODEL
For household use
MCT-A
Stainless Steel Mug
Thank you for purchasing a “TIGER” Stainless Steel Mug.
Pleaseread the instructions completely before use.
Keep these instructions for future reference.
Instructions
*Make sure that all parts are present before use.
Automatic lock
When the lid is closed, it locks
automatically.
Lid gasket
Lid
Button
Stopper
gasket
Body
Stopper
Button
Spout
TIGER CORPORATION HONG KONG LIMITED
TIGER CORPORATION U.S.A.
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912
URL : http://tiger-corporation.hk/
URL : https://tiger-corporation-us.com
Fax: (852) 2418-0911
1815 W 205th Street, Unit 106, Torrance, CA 90501
Tel: 1-866-55-TIGER (84437)
Email: [email protected]
Specifications
Before Contacting Customer Service
Replacing and Purchasing Consumable Parts
For the purpose of performance improvement, designs, specifications and parts shown in this
publication are subject to change without notice.
The gasket and stopper are consumable parts. Check once a year for damage/deterioration. If
heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where you purchased this product.
The utmost measures have been taken to ensure the quality of this product. However, should the
product be defective, contact your dealer and provide the following information.
1. Product name 2. Model Number (bottom of the product)
3. Description of trouble (As detailed as possible) 4. Purchase date
Feel free to send any questions or comments about this product to the shop where you purchased it.
Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C / 203°F±2°F
and leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 1hour or 6hours.
Cold retention has been calculated under the condition of adding cold water at 4°C ±1°C / 39°F±2°F and
leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 6hours.
Capacity is the actual volume of water that can be stored in the product when the stopper is closed. This
is not the “Maximum level” volume described in “Safety Precautions”.
Weight
Size
Approximate value
Model No.
Capacity
Heat retention (1 hour)
Cold retention (6 hours) Less than 9°C / 49°F
Greater than 85°C / 185°F
0.35 L / 11.8 oz
MCT-A035
W 6.6 x D 7.0 x H 18.0 cm
W 2.60 x D 2.76 x H 7.09 inch
0.17kg / 0.37 lbs
Less than 8°C / 47°F
Greater than 86°C / 186°F
0.50 L / 16.9 oz
MCT-A050
W 6.6 x D 7.0 x H 23.1 cm
W 2.60 x D 2.76 x H 9.09 inch
0.21kg / 0.46 lbs
(6 hours) Greater than 63°C / 145°F Greater than 69°C / 156°F
MODEL
For household use
MCT-A
Stainless Steel Mug
Thank you for purchasing a “TIGER” Stainless Steel Mug.
Pleaseread the instructions completely before use.
Keep these instructions for future reference.
Instructions
*Make sure that all parts are present before use.
Automatic lock
When the lid is closed, it locks
automatically.
Lid gasket
Lid
Button
Stopper
gasket
Body
Stopper
Button
Spout
TIGER CORPORATION HONG KONG LIMITED
TIGER CORPORATION U.S.A.
Head Office: 3-1 Hayami-cho, KadomaCity, Osaka 571-8571, Japan
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912
URL : http://tiger-corporation.hk/
URL : https://tiger-corporation-us.com
Fax: (852) 2418-0911
1815 W 205th Street, Unit 106, Torrance, CA 90501
Tel: 1-866-55-TIGER (84437)
Email: [email protected]
MCT-A
Specifications
Before Contacting Customer Service
Replacing and Purchasing Consumable Parts
For the purpose of performance improvement, designs, specifications and parts shown in this
publication are subject to change without notice.
The gasket and stopper are consumable parts. Check once a year for damage/deterioration. If
heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where you purchased this product.
The utmost measures have been taken to ensure the quality of this product. However, should the
product be defective, contact your dealer and provide the following information.
1. Product name 2. Model Number (bottom of the product)
3. Description of trouble (As detailed aspossible) 4. Purchase date
Feel free to send any questions or comments about this product to the shop where you purchased it.
Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C / 203°F±2°F
and leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 1hour or 6hours.
Cold retention has been calculated under the condition of adding cold water at 4°C ±1°C / 39°F±2°F and
leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 6hours.
Capacity is the actual volume of water that can be stored in the product when the stopper is closed. This
is not the “Maximum level” volume described in “Safety Precautions”.
Weight
Size
Approximate value
Model No.
Capacity
Heat retention (1 hour)
Cold retention (6 hours) Less than 9°C / 49°F
Greater than 85°C / 185°F
0.35 L / 11.8 oz
MCT-A035
W 6.6 x D 7.0 xH 18.0 cm
W 2.60 x D 2.76 x H 7.09 inch
0.17kg / 0.37 lbs
Less than 8°C / 47°F
Greater than 86°C / 186°F
0.50 L / 16.9 oz
MCT-A050
W 6.6 x D 7.0 xH 23.1 cm
W 2.60 x D 2.76 x H 9.09 inch
0.21kg / 0.46 lbs
(6 hours) Greater than 63°C / 145°F Greater than 69°C / 156°F
MCT-A
不銹鋼保溫保冷杯
使用說明
書
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
0.35L
0.17kg
0.50L
0.21kg
MCT-A
1
2
This symbol indicates a prohibited action.This symbol indicates an action that must be
taken or an instruction that must be followed.
Warning
Caution
Description of Symbols
Caution
Warning
This symbol indicates there is a
possibility of death or serious injury.
Caution
This symbol indicates there is a
possibility of injury or damage to property.
Approx. 1cm
1/2inch
Safety Precautions
Keep out of reach of children. Do not let children play
with the product.
There is a risk of burns or injuries.
Do not put dry ice or carbonated beverages inthe product.
The air pressure inside the product may increase, causing the stopper and lid to become stuck
or prone to shattering, or the parts to be damaged.
Be sure to set the stopper in proper position.
Contents may leak and cause soiling or skin burns.
Do not store milk, dairy products, or certain fruit juices in the product.
The contents may decay or spoil. Long-time spoilage can create gases that raise the air pressure
inside the product due to decay or spoil, causing the stopper and lid to become stuck or prone to
shattering, or the parts to be damaged, and result in scattering of fragments.
Do not touch the brim of the product with a kettle spout.
The product may fall over, causing burns or injuries to the skin, or a scratch or deformation to the
product.
Do not place the product near stoves, open flames, or other sources of extreme
heat.
There is a risk of burns or deformation or discoloring of the product.
Do not use the product in a moving vehicle.
This may result in burns or soiling of clothes or of the interior of the vehicle. (Using the product
while you are driving is very dangerous, as you may be distracted.)
Do not open the lid ifthe product is tilted or placed near your face when it
contains a hot beverage.
This may cause the internal air pressure of the product to increase and the contents to burst out
and scatter, potentially causing burns.
Drink slowly and do not tilt the product abruptly when the product contains ahot
beverage.
Do not tilt the product abruptly. This may cause the contents to burstout, potentially causing burns.
Be sure to fill the product with drink below the maximum level shown in the
diagram.
If the contents exceed the specified line, they may
leak or overflow, potentially causing burns.
Do not use the product if its ability to retain heat declines.
Hot beverages can make the product very hot, potentially causing burns.
Do not knock over, drop or expose the product to excessive shocks.
There is a risk of damage to the product, a reduction of its heat- or cold-retention ability, rusting,
flaking of the exterior paint, or leakage of contents.
Do not use the product for any purpose other than keeping beverages warm or
cold for drinking.
Do not disassemble or attempt to repair the product by yourself.
There is a risk of failure or accident. The contents may leak.
Do not put the product in a freezer.
Contents may leak or the product may be damaged.
Do not store tea leaves or peeled fruit.
They may clog the spout, resulting in leakage of the contents.
Do not heat the product ina microwave oven.
There is a risk of injury or failure due to sparks.
Be sure to follow all instructions.
All safety instructions described below are intended to protect the user and other individuals
from physical harm and household damage.
Safety instructions are classified and described according to the level of harm and damage
caused by improper use, as shown below.
Do not remove the caution sticker on the product.
Maximum level
(slightly less)
Beverage
1 2
警 告
可能會導致死亡或重傷的內容。
不可實施的“禁止”內容。 必須執行的“指示”內容。
注意 可能會造成使用者受害或財物受損的
內容。
警 告
注意
所用圖形符號的說明
注意
安全注意事項 請務必遵守
請勿置放於幼兒易拿取的地方。注意不要讓孩童玩耍或使用。
否則可能導致燙傷或受傷等。
請勿裝入乾冰·碳酸飲料等。
可能發生內壓上升、中栓或杯蓋打不開、杯中液體噴出、零件受損的情況，導致受傷等。
請確認中栓已拴緊。
否則可能導致杯中液體滲漏，造成燙傷或弄髒其他物品。
請勿裝入牛乳·乳製飲料·果汁等。
否則會導致液體腐壞、變質。外，長時間放置時，液體的腐壞、變質會導致氣體產生而使本體
內壓上升，可能會有打不開中栓或杯蓋、杯中液體噴出、零件受損飛散等危險。
◆ 以下說明了為防止對使用者或他人造成人身傷害或財產損害而必須遵守的事項。
◆ 關於因操作錯誤而導致的危害及損害的程度，按以下分類進行說明。
注水時，請勿讓水壺等容器抵住本體的肩部。
否則可能使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿置放於瓦斯爐火及暖爐等火源高溫處。
否則會導致燙傷，本體變形、變色。
汽車行駛中請勿使用。
否則可能導致燙傷或車內、衣服被弄髒。（如果是駕駛員，會分散開車時的注意力，非常危
險。）
在已裝入熱飲時，請勿於傾斜狀態下或靠近臉部的狀態下打開中栓的蓋子。
否則可能導致本體內壓上升、熱飲急速噴出或飛濺而造成燙傷等。
飲用熱飲時，請注意避免突然傾斜本體，並慢慢飲用。
如果突然傾斜杯體，杯中飲料會急速流出，可能導致燙傷等。
飲料食物的量，請加至圖示所標記位置。
若裝入過多的飲料，可能導致滲漏、溢出，造成燙傷。
當此產品的保溫效能失效，請勿繼續使用。
裝入熱的飲品食物，會使本體變熱，有可能造成燙傷的危險性。
請勿翻倒、摔落地面或撞擊等強烈衝擊。
否則可能導致杯體破損、保溫（保冷）效果失效、生銹、塗層剝落、杯中液體滲漏。
請勿使用於飲品保溫·保冷以外之用途。
請勿自行拆解或修理。
否則會導致故障、事故。以免內容物漏出。
請勿將保溫保冷杯放入冷凍室內。
否則可能導致杯中液體滲漏或杯體破損。
請勿將茶葉、果肉等裝入杯中。
否則可能導致滲漏。
請勿使用微波爐加熱。
會造成火花飛濺，導致受傷和設備故障。
請勿撕下貼在本體上的相關注意事項貼紙。
滿水位容量
（略少容量）
飲料
約 �cm( 公分 )
1
2
This symbol indicates a prohibited action.This symbol indicates an action that must be
taken or an instruction that must befollowed.
Warning
Caution
Description of Symbols
Caution
Warning
This symbol indicates there is a
possibilityof death or serious injury.
Caution
This symbol indicates there is a
possibility of injury or damage to property.
Approx. 1cm
1/2inch
Safety Precautions
Keep out of reach of children. Do not let children play
with the product.
There is a risk of burns or injuries.
Do not put dry ice or carbonated beverages inthe product.
The air pressure inside the product may increase, causing the stopper and lid to become stuck
or prone to shattering, or the parts to be damaged.
Be sure to set the stopper in proper position.
Contents may leak and cause soiling or skin burns.
Do not store milk, dairy products, or certain fruit juices in the product.
The contents may decay or spoil. Long-time spoilage can create gases that raise the air pressure
inside the product due to decay or spoil, causing the stopper and lid to become stuck or prone to
shattering, or the parts to be damaged, and result in scattering of fragments.
Do not touch the brim of the product with a kettle spout.
The product may fall over, causing burns or injuries to the skin, or a scratch or deformation to the
product.
Do not place the product near stoves, open flames, or other sources ofextreme
heat.
There is a risk of burns or deformation or discoloring of the product.
Do not use the product in a moving vehicle.
This may result in burns or soiling of clothes or of the interior of the vehicle. (Using the product
while you are driving is very dangerous, as you may be distracted.)
Do not open the lid ifthe product is tilted or placed near your face when it
contains a hot beverage.
This may cause the internal air pressure of the product to increase and the contents to burst out
and scatter, potentially causing burns.
Drink slowly and do not tilt the product abruptly when the product contains a hot
beverage.
Do not tilt the product abruptly. This may cause the contents to burst out, potentially causing burns.
Be sure to fill the product with drink below the maximum level shown in the
diagram.
If the contents exceed the specified line, they may
leak or overflow, potentially causing burns.
Do not use the product if its ability to retain heat declines.
Hot beverages can make the product very hot, potentially causing burns.
Do not knock over, drop or expose the product to excessive shocks.
There is a risk of damage to the product, a reduction of its heat- or cold-retention ability, rusting,
flaking of the exterior paint, or leakage of contents.
Do not use the product for any purpose other than keeping beverages warm or
cold for drinking.
Do not disassemble or attempt to repair the product by yourself.
There is a risk of failure or accident. The contents may leak.
Do not put the product in a freezer.
Contents may leak or the product may be damaged.
Do not store tea leaves or peeled fruit.
They may clog the spout, resulting in leakage of the contents.
Do not heat the product ina microwave oven.
There is a risk of injury or failure due to sparks.
Be sure to follow all instructions.
All safety instructions described below are intended to protect the user and other individuals
from physical harm and household damage.
Safety instructions are classified and described according to the level of harm and damage
caused by improper use, as shown below.
Do not remove the caution sticker on the product.
Maximum level
(slightly less)
Beverage
1 2
警告
可能會導致死亡或重傷的內容。
不可實施的“禁止”內容。 必須執行的“指示”內容。
注意 可能會造成使用者受害或財物受損的
內容。
警告
注意
所用圖形符號的說明
注意
安全注意事項 請務必遵守
請勿置放於幼兒易拿取的地方。注意不要讓孩童玩耍或使用。
否則可能導致燙傷或受傷等。
請勿裝入乾冰·碳酸飲料等。
可能發生內壓上升、中栓或杯蓋打不開、杯中液體噴出、零件受損的情況，導致受傷等。
請確認中栓已拴緊。
否則可能導致杯中液體滲漏，造成燙傷或弄髒其他物品。
請勿裝入牛乳·乳製飲料·果汁等。
否則會導致液體腐壞、變質。外，長時間放置時，液體的腐壞、變質會導致氣體產生而使本體
內壓上升，可能會有打不開中栓或杯蓋、杯中液體噴出、零件受損飛散等危險。
◆ 以下說明了為防止對使用者或他人造成人身傷害或財產損害而必須遵守的事項。
◆ 關於因操作錯誤而導致的危害及損害的程度，按以下分類進行說明。
注水時，請勿讓水壺等容器抵住本體的肩部。
否則可能使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿置放於瓦斯爐火及暖爐等火源高溫處。
否則會導致燙傷，本體變形、變色。
汽車行駛中請勿使用。
否則可能導致燙傷或車內、衣服被弄髒。（如果是駕駛員，會分散開車時的注意力，非常危
險。）
在已裝入熱飲時，請勿於傾斜狀態下或靠近臉部的狀態下打開中栓的蓋子。
否則可能導致本體內壓上升、熱飲急速噴出或飛濺而造成燙傷等。
飲用熱飲時，請注意避免突然傾斜本體，並慢慢飲用。
如果突然傾斜杯體，杯中飲料會急速流出，可能導致燙傷等。
飲料食物的量，請加至圖示所標記位置。
若裝入過多的飲料，可能導致滲漏、溢出，造成燙傷。
當此產品的保溫效能失效，請勿繼續使用。
裝入熱的飲品食物，會使本體變熱，有可能造成燙傷的危險性。
請勿翻倒、摔落地面或撞擊等強烈衝擊。
否則可能導致杯體破損、保溫（保冷）效果失效、生銹、塗層剝落、杯中液體滲漏。
請勿使用於飲品保溫·保冷以外之用途。
請勿自行拆解或修理。
否則會導致故障、事故。以免內容物漏出。
請勿將保溫保冷杯放入冷凍室內。
否則可能導致杯中液體滲漏或杯體破損。
請勿將茶葉、果肉等裝入杯中。
否則可能導致滲漏。
請勿使用微波爐加熱。
會造成火花飛濺，導致受傷和設備故障。
請勿撕下貼在本體上的相關注意事項貼紙。
滿水位容量
（略少容量）
飲料
約 �cm( 公分 )
3
4
Caution
How to Use
Before using the can holder, check its intensity.
If the holder is not strong enough, it may come off and get damaged. This may result in burns or
soiling of clothes or of the interior of the vehicle.
When using a commerciallyavailable can holder, use the stationary type.
If the suspension holder that is attached to the window or air conditioning outlet is used, it may
come off. This may result in burns or soiling of clothes or of the interior of the vehicle.
For can holder
Be sure to clean the product immediately after use, especially after consuming
sports drinks.
Rinse the inside of the product well, even if you are going out, for example, and don’t have time
to wash it thoroughly. Mold, rust, or holes may appear.
Do not store soups or beverages containing salt inthe product.
The product may become decayed, spoiled, or rusted.
Do not leave the product in a bag for a long time.
The storage conditions may change and there is a risk of rust or odors.
Do not place the product in a bag if its exterior is wet.
There is a risk of rust, odor, or soiling.
Do not pour the beverage into the bottle while the stopper isset.
The contents may leak or the product may fall over, causing burns or injuries to the skin. The
product may also be scratched or deformed.
Do not use chlorine-based bleaches.
This may cause rusting, flaking of the exterior paint, or a hole on the product.
Do not scrape orrub the patterns, and stickers on the surface of the product
using your nails or a hard object.
The exterior paint may come off.
Be sure to wipe spilled beverage on spout.
The contents may leak when the lid is closed.
(1) Check that the lid gasket and stopper gasket are attached to the stopper.
(2) Pour hot water into the body and securely close the stopper and lid.
(3) Hold the body and gently shake it several times to rinse the inside thoroughly. (Do not
shake it excessively. The hot water may splash out, potentially causing burns.)
(4) Discard the hot water, and then clean each part.
Turn the stopper to remove it.
To keep your beverage warm/cool longer, first pour a small amount of
hot/cold water into the main body and let it sit for one or two minutes.
Pour your hot/cold beverage into the main body.
Place the main body in an upright position and turn the stopper to
close it.
Pour appropriate amount of beverages.
Push the button to open the lid, and then drink the beverage.
1
2
3
4
5
Before the first use
Check that the lid gasket, stopper gasket and spoutare attached to the stopper.
Discard the hot/cold water after preheating/precooling.
Do not insert large cubes of ice. Use small cubes or crushed ice.
Turn the stopper as far as it will go to securely close it.
Do not push the button while tilting the body. Liquid may splash out of the
bottle.
Do not tilt the body immediately after pouring in ahot beverage and closing the lid.
The contents may leak.
Cleaning
You may notice an unusual odor coming from the material of the product.
In this case, clean the product by following the steps below.
CautionCaution
ButtonLid
Spout
Slide the
button
down.
Push the bottom of
the button while
holding it down.
3 4
注意
使用方法
使用杯架時，請事先確認強度後再使用。
強度不足時，杯架可能會鬆脫、破損，進而導致燙傷或車內、衣服被弄髒。
市售的杯架請使用固定放置型。
如果使用安裝在車窗或空調出風口的吊掛型杯架，杯架可能會鬆脫，進而導致燙傷或車內、衣
服被弄髒。
使用杯架時
若裝入運動飲料，飲用完畢後請儘速清洗。
外出等情況下，即使無法充分清洗，也請立即用水沖洗本體內側。否則可能導致發霉、生銹、
孔蝕等故障。
請勿裝入味噌湯或濃湯等含有鹽分的湯汁。
否則可能導致液體腐壞、變質、生銹。
請勿將本產品長時間放置於包包或袋子中。
受周圍環境（濕度、鹽分）等的影響，可能導致保溫保冷杯生銹、產生異味。
本體外側潮濕的狀態下，請勿放入提袋等。
否則可能導致保溫保冷杯生銹、產生異味或弄髒其他物品。
請勿在中栓已設置好的狀態下倒入飲品。
否則可能會使內容物漏出、使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿使用含氯漂白劑。
否則可能導致保溫保冷杯生銹、塗層剝落、孔蝕。
請勿用指甲或硬物刮擦本體的花紋、和貼紙。
否則可能導致花紋、貼紙剝落。
請將杯口殘留的飲品擦拭乾淨。
關上中栓的時候可能會漏出。
➀確認有附上墊圈。
➁在本體裡裝入熱水，並確實擰緊杯蓋。
➂握住本體，重複數次徹底沖洗內側的動作。（切勿施加強烈振動。以免熱水噴出造成
燙傷。）
➃倒掉熱水，對各部分進行清潔保養。
●確認杯蓋墊圈、栓體墊圈、飲用口附在中栓上。
●預熱（預冷）後，倒掉熱水（冷水）。
請勿裝入過多(量)飲品。
●在放入大的冰塊時，請不要整個塞入，請先將其分成小塊再放入。
●將中栓擰緊到不能旋轉為止，確認其已擰緊。
1
2
3
4
5
●請勿在本體傾倒的狀態下按下按鈕。否則熱飲可能會一口氣流出來。
●將熱飲倒入本體並緊中栓後，請勿讓本體傾倒。以免內容物漏出。
有時會散發產品材料特有的氣味。
此時請按照以下步驟清潔保養。
請注意請注意
按鈕
➀ 將按鈕
往下押
➁ 在將按鈕往下押的
狀態下向前推按鈕下方
杯蓋
飲用口
3 4
注意
使用方法
使用杯架時，請事先確認強度後再使用。
強度不足時，杯架可能會鬆脫、破損，進而導致燙傷或車內、衣服被弄髒。
市售的杯架請使用固定放置型。
如果使用安裝在車窗或空調出風口的吊掛型杯架，杯架可能會鬆脫，進而導致燙傷或車內、衣
服被弄髒。
使用杯架時
若裝入運動飲料，飲用完畢後請儘速清洗。
外出等情況下，即使無法充分清洗，也請立即用水沖洗本體內側。否則可能導致發霉、生銹、
孔蝕等故障。
請勿裝入味噌湯或濃湯等含有鹽分的湯汁。
否則可能導致液體腐壞、變質、生銹。
請勿將本產品長時間放置於包包或袋子中。
受周圍環境（濕度、鹽分）等的影響，可能導致保溫保冷杯生銹、產生異味。
本體外側潮濕的狀態下，請勿放入提袋等。
否則可能導致保溫保冷杯生銹、產生異味或弄髒其他物品。
請勿在中栓已設置好的狀態下倒入飲品。
否則可能會使內容物漏出、使杯體翻倒，導致燙傷、受傷或本體受損、變形。
請勿使用含氯漂白劑。
否則可能導致保溫保冷杯生銹、塗層剝落、孔蝕。
請勿用指甲或硬物刮擦本體的花紋、和貼紙。
否則可能導致花紋、貼紙剝落。
請將杯口殘留的飲品擦拭乾淨。
關上中栓的時候可能會漏出。
➀確認有附上墊圈。
➁在本體裡裝入熱水，並確實擰緊杯蓋。
➂握住本體，重複數次徹底沖洗內側的動作。（切勿施加強烈振動。以免熱水噴出造成
燙傷。）
➃倒掉熱水，對各部分進行清潔保養。
● 確認杯蓋墊圈、栓體墊圈、飲用口附在中栓上。
● 預熱（預冷）後，倒掉熱水（冷水）。
請勿裝入過多(量)飲品。
● 在放入大的冰塊時，請不要整個塞入，請先將其分成小塊再放入。
● 將中栓擰緊到不能旋轉為止，確認其已擰緊。
1
2
3
4
5
● 請勿在本體傾倒的狀態下按下按鈕。否則熱飲可能會一口氣流出來。
● 將熱飲倒入本體並緊中栓後，請勿讓本體傾倒。以免內容物漏出。
有時會散發產品材料特有的氣味。
此時請按照以下步驟清潔保養。
請注意請注意
按鈕
➀ 將按鈕
往下押
➁ 在將按鈕往下押的
狀態下向前推按鈕下方
杯蓋
飲用口
3
4
Caution
How to Use
Before using the can holder, check its intensity.
If the holder is not strong enough, it may come off and get damaged. This may result in burns or
soiling of clothes or of the interior of the vehicle.
When using a commerciallyavailable can holder, use the stationary type.
If the suspension holder that is attached to the window or air conditioning outlet is used, it may
come off. This may result in burns or soiling of clothes or of the interior of the vehicle.
For can holder
Be sure to clean the product immediately after use, especially after consuming
sports drinks.
Rinse the inside of the product well, even if you are going out, for example, and don’t have time
to wash it thoroughly. Mold, rust, or holes may appear.
Do not store soups or beverages containing salt inthe product.
The product may become decayed, spoiled, or rusted.
Do not leave the product in a bag for a long time.
The storage conditions may change and there is a risk of rust or odors.
Do not place the product in a bag if its exterior is wet.
There is a risk of rust, odor, or soiling.
Do not pour the beverage into the bottle while the stopper isset.
The contents may leak or the product may fall over, causing burns or injuries to the skin. The
product may also be scratched or deformed.
Do not use chlorine-basedbleaches.
This may cause rusting, flaking of the exterior paint, or a hole on the product.
Do not scrape orrub the patterns, and stickers on the surface ofthe product
using your nails or a hard object.
The exterior paint may come off.
Be sure to wipe spilled beverage on spout.
The contents may leak when the lid is closed.
(1) Check that the lid gasket and stopper gasket are attached to the stopper.
(2) Pour hot water into the body and securely close the stopper and lid.
(3) Hold the body and gently shake it several times to rinse the inside thoroughly. (Do not
shake it excessively. The hot water may splash out, potentially causing burns.)
(4) Discard the hot water, and then clean each part.
Turn the stopper to remove it.
To keep your beverage warm/cool longer, first pour a small amount of
hot/cold water into the main body and let it sit for one or two minutes.
Pour your hot/cold beverage into the main body.
Place the main body in an upright position and turn the stopper to
close it.
Pour appropriate amount of beverages.
Push the button to open the lid, and then drink the beverage.
1
2
3
4
5
Before the first use
Check that the lid gasket, stopper gasket and spoutare attached to the stopper.
Discard the hot/cold water after preheating/precooling.
Do not insert large cubes of ice. Use small cubes or crushed ice.
Turn the stopper as far as it will go to securely close it.
Do not push the button while tilting the body. Liquid may splash out of the
bottle.
Do not tilt the body immediately after pouring in a hot beverage and closing the lid.
The contents may leak.
Cleaning
You may notice an unusual odor coming from the material of the product.
In this case, clean the product by following the steps below.
CautionCaution
ButtonLid
Spout
Slide the
button
down.
Push the bottom of
the button while
holding it down.
5 6
清潔保養的方法
墊圈有異味時
飲用完後，使本體保持豎直狀態，
確實擰緊杯蓋。
墊圈拆卸方法·安裝方法
杯蓋墊圈拆卸方法·安裝方法
拆卸方法 安裝方法
·安裝方法
拆卸方法 安裝方法
栓體墊圈拆卸方法·安裝方法
本體內側的髒污變得很明顯時･･･
6
請注意請注意
請注意請注意
請注意請注意
飲用口拆卸方法
5
6
Clean the product on the same day after every use.
Use mild kitchen detergent (for table or cookware).
Use a soft sponge or cloth.
Clean the product thoroughly to prevent any odor.
How to Clean
If an odor remains on the gasket
Depending on the contents, the odor may remain on the gasket. In this case, leave the
gasket in boiling water for approximately 30 minutes to reduce the odor. If the odor is
still noticeable, purchase a new gasket (sold as an optional part).
After drinking the beverage, keep
(1)Wash each part using a sponge with diluted detergent water or lukewarm water, and
then thoroughly rinse it with water.
(2)Wipe the water off with a dry cloth and dry the parts thoroughly.
Attaching and Removing the gasket
If marks start to become visible on the inside of the main body
Such staining can be caused by minerals in water, such as calcium, magnesium, and iron. It is
recommended to clean them with citric acid, which is available at supermarkets and drug stores.
(1) Dilute the citric acid (approximately 10 g) in lukewarm water, and then pour it into the main body.
(2)
After a few hours have elapsed, wash the main body with a soft brush and then thoroughly rinseit.
(3) Dry the main body completely.
Note: Do not use detergents for other brands’ pots or insulated bottles. The gasket may be broken.
For red, rust-like spots or rough areas
6
Make sure the product does not suffer any strong impact while carrying it.
The lid may open.
If you place the product in a bag, make sure it is upright to prevent any accidental
leakage. The product may leak if you place it on its side.
If you place the product in a bag, make sure the button keeps away from bag
contents. The lid may open.
Do not soak the body when washing them. (Water may enter.)
After washing the whole body, immediately use a dry cloth to wipe off the moisture on
its outer surface. Not wiping off all droplets could leave water stains or cause rust and
other marks.
Do not use thinners, cleansers, bleaches, cleaning wipes, metallic scrubbing brushes,
or nylon scrubbing brushes.
Do not use a dishwasher or dish dryer, and do not wash with boiling water. (Except
gasket)
Be sure to attach the gaskets and spout.
Dry the body and lid completely after removing stains when not in use for a long time.
Do not attach the gasket in the incorrect place or direction. The contents
may leak.
Attaching and Removing the lid gasket
To remove To attach
Attaching and Removing the spout
To remove To attach
Slowly remove the lid
gasket while holding
and turning it.
When attaching the
lid gasket, make
sure to fit it
completely in the
proper direction.
Push the hinge
side slowly to
remove.
Spout can not
be removed,
even if its front
side is puhed.
After fitting the
front side of
spout, set the
hinge side.
Make sure the
spout is fixed.
Attaching and removing the stopper gasket
Slowly remove the stopper gasket while holding its edge.
When attaching the stopper gasket, make sure to fit it completely in the proper direction.
CautionCaution
CautionCaution
CautionCaution
the product in an upright position
and securely close the lid.
Securely close the lid to
fix the automatic lock.
Button
Lid
Lid gasket
Spout Hinge
Spout
Spout
Spout
Stopper gasket
Automatic lock
When the lid is
closed, the button
automatically
moves to the
lock (up) position.
5 6
清潔保養的方法
墊圈有異味時
飲用完後，使本體保持豎直狀態，
確實擰緊杯蓋。
墊圈拆卸方法·安裝方法
杯蓋墊圈拆卸方法·安裝方法
拆卸方法 安裝方法
·安裝方法
拆卸方法 安裝方法
栓體墊圈拆卸方法·安裝方法
本體內側的髒污變得很明顯時･･･
6
請注意請注意
請注意請注意
請注意請注意
飲用口拆卸方法
5
6
Clean the product on the same day after every use.
Use mild kitchen detergent (for table or cookware).
Use a soft sponge or cloth.
Clean the product thoroughly to prevent any odor.
How to Clean
If an odor remains on the gasket
Depending on the contents, the odor may remain on the gasket. In this case, leave the
gasket in boiling water for approximately 30 minutes to reduce the odor. If the odor is
still noticeable, purchase anew gasket (sold as an optional part).
After drinking the beverage, keep
(1)Wash each part usingasponge with diluted detergent water or lukewarm water, and
then thoroughly rinse it with water.
(2)Wipe the water off with adry cloth and dry the parts thoroughly.
Attaching and Removing the gasket
If marks start to become visible on the inside of the main body
Such staining can be caused by minerals in water, such as calcium, magnesium, and iron. It is
recommended to clean them with citric acid, which is available at supermarkets and drug stores.
(1) Dilute the citric acid (approximately 10 g) in lukewarm water, and then pour it into the main body.
(2)
After a few hours have elapsed, wash the main body with a soft brush and then thoroughly rinse it.
(3) Dry the main body completely.
Note: Do not use detergents for other brands’ pots or insulated bottles. The gasket may be broken.
For red, rust-like spots or rough areas
6
Make sure the product does not suffer any strong impact while carrying it.
The lid may open.
If you place the product in a bag, make sure it is upright to prevent any accidental
leakage. The product may leak if you place it on its side.
If you place the product in a bag, make sure the button keeps away from bag
contents. The lid may open.
Do not soak the body when washing them. (Water may enter.)
After washing the whole body, immediately use a dry cloth to wipe off the moisture on
its outer surface. Not wiping off all droplets could leave water stains or cause rust and
other marks.
Do not use thinners, cleansers, bleaches, cleaning wipes, metallic scrubbing brushes,
or nylon scrubbing brushes.
Do not use a dishwasher or dish dryer, and do not wash with boiling water. (Except
gasket)
Be sure to attach the gaskets and spout.
Dry the body and lid completely after removing stains when not in use for a long time.
Do not attach the gasket in the incorrect place or direction. The contents
may leak.
Attaching and Removing the lid gasket
To remove To attach
Attaching and Removing the spout
To remove To attach
Slowly remove the lid
gasket while holding
and turning it.
When attaching the
lid gasket, make
sure to fit it
completely in the
proper direction.
Push the hinge
side slowly to
remove.
Spout can not
be removed,
even if its front
side is puhed.
After fitting the
front side of
spout, set the
hinge side.
Make sure the
spout is fixed.
Attaching and removing the stopper gasket
Slowly remove the stopper gasket while holding its edge.
When attaching the stopper gasket, make sure to fit it completely in the proper direction.
CautionCaution
CautionCaution
CautionCaution
the product in an upright position
and securely close the lid.
Securely close the lid to
fix the automatic lock.
Button
Lid
Lid gasket
Spout Hinge
Spout
Spout
Spout
Stopper gasket
Automatic lock
When the lid is
closed, the button
automatically
moves to the
lock (up) position.
MCT-A
不銹鋼保溫保冷杯
使用說明書
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
0.35L
0.17kg
0.50L
0.21kg
真 31
:+81(6)6906-2124
虎記股份有限公司
0800-888-572
(02) 23971179
(06) 2200855
(07) 7161460
(06) 2655899
(04) 23754627
https://www.tiger-corporation.tw/
MODEL
For household use
MCT-A
Stainless Steel Mug
Thank you for purchasing a “TIGER” Stainless Steel Mug.
Pleaseread the instructions completely before use.
Keep these instructions for future reference.
Instructions
*Make sure that all parts are present before use.
Automatic lock
When the lid is closed, it locks
automatically.
Lid gasket
Lid
Button
Stopper
gasket
Body
Stopper
Button
Spout
TIGER CORPORATION HONG KONG LIMITED
TIGER CORPORATION U.S.A.
Head Office: 3-1 Hayami-cho, Kadoma City, Osaka 571-8571, Japan
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912
URL : http://tiger-corporation.hk/
URL : https://tiger-corporation-us.com
Fax: (852) 2418-0911
1815 W 205th Street, Unit 106, Torrance, CA 90501
Tel: 1-866-55-TIGER (84437)
Email: [email protected]
MCT-A
Specifications
Before Contacting Customer Service
Replacing and Purchasing Consumable Parts
For the purpose of performance improvement, designs, specifications and parts shown in this
publication are subject to change without notice.
The gasket and stopper are consumable parts. Check once a year for damage/deterioration. If
heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where you purchased this product.
The utmost measures have been taken to ensure the quality of this product. However, should the
product be defective, contact your dealer and provide the following information.
1. Product name 2. Model Number (bottom of the product)
3. Description of trouble (As detailed aspossible) 4. Purchase date
Feel free to send any questions or comments about this product to the shop where you purchased it.
Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C / 203°F±2°F
and leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 1hour or 6hours.
Cold retention has been calculated under the condition of adding cold water at 4°C ±1°C / 39°F±2°F and
leaving it in a room temperature of 20°C±2°C / 68°F±4°F for 6hours.
Capacity is the actual volume of water that can be stored in the product when the stopper is closed. This
is not the “Maximum level” volume described in “Safety Precautions”.
Weight
Size
Approximate value
Model No.
Capacity
Heat retention (1 hour)
Cold retention (6 hours) Less than 9°C / 49°F
Greater than 85°C / 185°F
0.35 L / 11.8 oz
MCT-A035
W 6.6 x D 7.0 x H 18.0 cm
W 2.60 x D 2.76 x H 7.09 inch
0.17kg / 0.37 lbs
Less than 8°C / 47°F
Greater than 86°C / 186°F
0.50 L / 16.9 oz
MCT-A050
W 6.6 x D 7.0 x H 23.1 cm
W 2.60 x D 2.76 x H 9.09 inch
0.21kg / 0.46 lbs
(6 hours) Greater than 63°C / 145°F Greater than 69°C / 156°F
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Tiger MCT-A035 Instruction manuals
- タイプ
- Instruction manuals
- このマニュアルも適しています
他の言語で
- English: Tiger MCT-A035
