Ottobock | 193R60, 3R60=ST, 3R60=KD, 3R60=HD
3
alignment
reference line should run through the upper anterior axis (alignment reference point)
-
4
5
6
-
distance
Attention
7
4.1.2 Static alignment optimization using 743L100 L.A.S.A.R. posture
(the following steps refer to Fig. 13)
1
2
adjusting the plantar flexionload line (laser
10 mm anterior to the lower front knee axis
3
4.2 Combination possibilities
INFORMATION
4.3 Adjustments and nal assembly
4.3.1 3R60=KD socket fabrication
4.3.1.1 Lamination prior to trial tting