Mitsubishi Electric MI Configurator インストールガイド
- タイプ
- インストールガイド
1.
•
•
•
•
•
•
•
•
•
●
●
●
•
•
•
•
2.
2.1
•
•
2.2
1.
2.
3.
2.3
•
•
•
•
3.
Before Using the Product
Please read this document before use. Keep the document in a safe place for future
reference. Make sure that the end users read the document.
For the precautions on using MI Configurator, refer to the following manual.
1. Operating Environment
*1 32-bit version is not supported.
• If .NET Framework 2.0, .NET Framework 4.0 and Windows Installer 3.0 are not
installed to thepersonal computer to which MI Configurator is to be installed,
approximately 500MB of memory is required in the system drive to install them.
• For Windows 10, if .NET Framework 3.5 (including .NET 2.0 and 3.0) or .NET
Framework 4.6 Advanced Services is invalid, it needs to be valid. Refer to either of
the following documents.
• MI Configurator Operating Manual [SH-081938ENG]
• TECHNICAL BULLETIN No. FA-A-0207.
• For Windows 8 and Windows 8.1, if .NET Framework 3.5 (including .NET 2.0 and
3.0) or .NET Framework 4.5 Advanced Services is invalid, it needs to be valid. Refer
to TECHNICAL BULLETIN No. FA-A-0153.
• For Windows 7, if .NET Framework 3.5 (including .NET 2.0 and 3.0) is invalid, it
needs to be valid.
• When the following functions are used, this product may not run properly.
• Application start-up in Windows compatibility mode
• Fast user switching
• Remote desktop
• Windows XP Mode
• Windows Touch or Touch
• Modern UI
• Client Hyper-V
• Tablet mode
• Virtual Desktops
• In the following cases, the screen of this product may not work properly.
• The size of the text and/or other items on the screen are changed to values
other than default values (such as 96 DPI, 100%, and 9 pt).
For details, refer to the following manual
MI Configurator Operating Manual [SH-081938ENG]
• The resolution of the screen is changed in operation.
• Windows theme is changed in operation.
• The multi-display is set.
• Use the product as a standard user or an administrator for Windows 10, Windows
8.1,Windows 8, and Windows 7.
• If the Windows firewall setting is enabled, the "Find Module function" and "Direct
connectionfunction" may not operate correctly. Disable the Windows firewall setting.
• In this product, the period (.) is used as the symbol of the decimal point. Regardless
of the setting of "Decimal symbol" on the control panel, use the period when enter
the decimal point.
MI Configurator Installation
Instructions
Manual name Manual number
MI Configurator Operating Manual SH-081938ENG
Notice
● Reprinting or reproducing the part or all of the contents of this document in any
form for any purpose without the permission of Mitsubishi Electric Corporation is
strictly forbidden.
● Although we have made the utmost effort to follow the revisions of the software
and hardware, in some cases, unsynchronized matter may occur.
● The information in this document may be subject to change without notice.
Item Contents
Personal computer A personal computer on which Microsoft
Windows
operates
CPU Intel
Core
2 Duo Processor 2GHz or more
Required
memory
64-bit OS: Recommended 2GB or more
32-bit OS: Recommended 1GB or more
Available hard disk
capacity
2GB or more
Monitor Resolution 1024 x 768 pixels or higher
OS
(English version,
Japanese version,
Simplified Chinese
version)
• Windows 10 (Home, Pro, Enterprise, Education, IoT
Enterprise 2016 LTSB
*1
)
• Windows 8.1, Windows 8.1 (Pro, Enterprise)
• Windows 8, Windows 8 (Pro, Enterprise)
• Windows 7 (Home Basic, Home Premium, Professional,
Ultimate, Enterprise)
2. Installation
2.1 Confirm before installation.
• Log on to MELIPC or Personal computer as an administrator.
• Close all running applications before installation. If the product is installed while other
applications are running, it may not operate normally.
2.2 .Procedure
1. Unzip the compressed folder.
2. Double-click 'setup.exe' in the unzipped folder to start installation.
3. Select or enter the necessary information by following the on-screen instructions.
2.3 Acknowledgements
• We do not guarantee those commercially available Microsoft Windows Operating
System products that are introduced in this manual.
• This software's copyright is owned by Mitsubishi Electric Corporation.
• This product (including manual) can be used under the Software License Agreement
only.
• We do not take any responsibilities for the consequences of operating this product
(including manual).
3. Uninstallation
Uninstall MI Configurator from the control panel of Windows.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Intel is either registered trademarks or trademarks of Intel Corporation in the United
States and/or other countries.
The company names, system names and product names mentioned in this manual
are either registered trademarks or trademarks of their respective companies.
In some cases, trademark symbols such as '
' or '
' are not specified in this manual.
使用前请务必阅读
使用前请务必阅读本资料。阅读后请妥善保管，以便随时使用。此外，本产品的用户
发生变更时，请务必将本资料转交给最终用户。
关于使用时的注意事项，请参照以下手册。
1. 运行环境
*1 不支持32位版。
• 安装MI Configurator的个人计算机中未安装.NET Framework 2.0、.NET Framework
4.0、WindowsInstaller 3.0时，系统驱动器需要有约500MB的可用空间用于安装.NET
Framework 2.0、.NET Framework 4.0、Windows Installer 3.0。
• Windows 10环境下，.NET Framework 3.5 （包括.NET 2.0和3.0）及.NET Framework
4.6 Advanced Services被禁用时，需要启用。请参照以下其中一项。
•MI Configurator操作手册[SH-081961CHN]
•技术简讯No.FA-A-0207 （英文版）
• Windows 8、Windows 8.1环境下，.NET Framework 3.5 （包括.NET 2.0和3.0）及
.NETFramework 4.5 Advanced Services被禁用时，需要启用。请参照技术简讯
No.FA-A-0153 （英文版）。
• Windows 7环境下，.NET Framework 3.5 （包括.NET 2.0和3.0）被禁用时，需要启
用。
• 如果使用下述功能，有可能导致本产品无法正常运行。
•Windows兼容模式下的应用程序启动
•用户简易切换
•远程桌面
•Windows XP Mode
•Windows Touch或Touch
•Modern UI
•客户端Hyper-V
•平板模式
•虚拟桌面
• 下述情况下，有可能导致本产品的画面无法正常运行。
•画面中的文本与其他项目等的尺寸为默认值 （96 DPI，100％，9pt等）以外
时
详细内容，请参照以下手册。
MI Configurator操作手册[SH-081961CHN]
•在运行中更改了画面的分辨率时
•在运行中更改了Windows的主题时
•设置为多屏显示时
• 在Windows 10、Windows 8.1、Windows 8、Windows 7及Windows Vista中，请以“标
准用户”或“管理员”权限使用。
• 启用Windows防火墙的设置时，“模块搜索功能”、“直接连接功能”有可能无法正
常运行。应禁用Windows防火墙的设置。
• 本产品中表示小数点的符号使用 （.）。无论控制面板的“小数点”的设置如何，输
入小数点时请输入 （.）。
MI Configurator安装步骤说明书
手册名称 手册编号
MI Configurator操作手册 SH-081961CHN
本说明书相关注意事项
● 未经三菱电机株式会社许可，禁止以任何形式转载或复制本说明书的部分或全部内
容。
● 本说明书的记载内容尽量跟随软件、硬件的改版进程，但仍有可能无法完全同步。
● 本说明书中记载的内容可能在事先未知会的情况下进行更改，敬请谅解。
项目 内容
个人计算机 基于Microsoft
Windows
下运行的个人计算机
CPU 建议Intel
Core
2 Duo 2GHz以上
必要内存 64位版操作系统时：建议2GB以上
32位版操作系统时：建议1GB以上
硬盘可用空间 2GB以上
显示器 分辨率1024×768像素以上
OS
（日语版、
英语版、
简体中文版）
• Windows 10(Home、Pro、Enterprise、Education、IoT
Enterprise 2016 LTSB
*1
)
• Windows 8.1、Windows 8.1 (Pro、Enterprise)
• Windows 8、Windows 8 (Pro、Enterprise)
• Windows 7(Home Basic、Home Premium、Professional、
Ultimate、Enterprise)
2. 安装步骤
2.1 安装前请确认
• 安装至MELIPC或个人计算机时，请以“管理员”或“Administrator”权限的用户进
行登录。
• 安装前，请结束所有运行的应用程序。如果在其他应用程序运行的状态下进行安装，
有可能导致产品无法正常运行。
2.2 步骤
1. 将取得的压缩文件解压缩。
2. 双击解压缩的文件夹中的“setup.exe”，启动安装程序。
3. 请按照画面指示选择或输入必要事项。
2.3 申明
• 三菱电机株式会社不负责对所介绍的支持Microsoft Windows Operating System的市
面销售软件产品提供保证，敬请谅解。
• 本产品软件著作权属于三菱电机株式会社所有。
• 本产品 （包含手册）只能基于软件使用协议使用。
• 对于使用本产品 （包含手册）后产生的一切影响，三菱电机株式会社不予负责，敬
请谅解。
3. 卸载步骤
应通过Windows的控制面板进行卸载。
Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Intel is either registered trademarks or trademarks of Intel Corporation in
the United States and/or other countries.
The company names, system names and product names mentioned in this manual
are either registered trademarks or trademarks of their respective
companies.
In some cases, trademark symbols such as‘
’or‘
’are not specified in
this manual.
SW1DNN-MICONF-O-INSTL-M
-
1
Mitsubishi Electric MI Configurator インストールガイド
- タイプ
- インストールガイド
他の言語で
関連論文
-
Mitsubishi Electric Predefined Protocol Support Tool For Positioning インストールガイド
-
Mitsubishi Electric EtherNet/IP インストールガイド
-
-
-
-
-
-
-