1.
•
•
•
•
•
•
•
●
●
●
•
•
•
•
2.
2.1
•
•
1.
2.
3.
3.
Before Using the Product
Please read this document before use. Keep the document in a safe place for future
reference. Make sure that the end users read the document.
For the precautions on using EtherNet/IP Configuration Tool, refer to the following
manuals.
MELSEC iQ-R EtherNet/IP Network Interface Module User's Manual (Startup)
[SH-081913ENG]
MELSEC iQ-R EtherNet/IP Network Interface Module User's Manual (Application)
[SH-081915ENG]
1. Operating Environment
*1 The display language of EtherNet/IP Configuration Tool is English only.
Note, however, that the language of some displays such as selection buttons
depends on the language of the operating system used. They may be displayed in
languages other than English.
EtherNet/IP Configuration Tool does not support the use of two-byte characters.
• For Windows 10, if .NET Framework 3.5 (including .NET 2.0 and 3.0) or .NET
Framework 4.6 (including .NET 4.0) is invalid, it needs to be valid. Refer to
TECHNICAL BULLETIN No. FA-A-0207.
• For Windows 8 and Windows 8.1, if .NET Framework 3.5 (including .NET 2.0 and
3.0) or .NET Framework 4.5 (including .NET 4.0) is invalid, it needs to be valid. Refer
to TECHNICAL BULLETIN No. FA-A-0153.
• For Windows 7, if .NET Framework 3.5 (including .NET 2.0 and 3.0) is invalid, it
needs to be valid.
• When the following functions are used, this product may not run properly.
• Application start-up in Windows compatibility mode
• Fast user switching
• Remote desktop
• Windows XP Mode
• Windows Touch or Touch
• Modern UI
• Client Hyper-V
• Tablet mode
• Virtual Desktops
• In the following cases, the screen of this product may not work properly.
• The size of the text and/or other items on the screen are changed to values
other than default values (such as 96 DPI, 100%, and 9 pt).
• The resolution of the screen is changed in operation.
• The multi-display is set.
• Use the product as a standard user or an administrator for Windows 10, Windows
8.1, Windows 8, and Windows 7.
• In this product, the period (.) is used as the symbol of the decimal point. Regardless
of the setting of "Decimal symbol" on the control panel, use the period when enter
the decimal point.
EtherNet/IP Configuration Tool
Installation Instructions
Notice
● Reprinting or reproducing the part or all of the contents of this document in any
form for any purpose without the permission of Mitsubishi Electric Corporation is
strictly forbidden.
● Although we have made the utmost effort to follow the revisions of the software
and hardware, in some cases, unsynchronized matter may occur.
● The information in this document may be subject to change without notice.
Item Contents
Personal computer A personal computer on which Microsoft
Windows
operates
CPU Intel
Core
2 Duo Processor 2GHz or more
recommended
Required memory 64-bit OS: 2GB or more recommended
32-bit OS: 1GB or more recommended
Available hard disk capacity 250MB or more
Monitor Resolution 1024 768 pixels or higher
OS
(Japanese version, English
version, Simplified Chinese
version)
*1
• Windows 10 (Home, Pro, Enterprise, Education)
• Windows 8.1, Windows 8.1 (Pro, Enterprise)
• Windows 8, Windows 8 (Pro, Enterprise)
• Windows 7 (Starter, Home Premium, Professional,
Ultimate, Enterprise)
2. Installation
2.1 Items to be checked before installation
• Log on to the personal computer as an administrator.
• Close all running applications before installation. If the product is installed while other
applications are running, it may not operate normally.
1. Unzip the compressed folder.
2. Double-click "setup.exe" in the unzipped folder to start the installer.
3. Select or enter the necessary information by following the on-screen instructions.
3. Uninstallation
Uninstall EtherNet/IP Configuration Tool from the control panel of Windows.
EtherNet/IP is a trademark of ODVA, Inc.
Intel is either registered trademarks or trademarks of Intel Corporation in the United
States and/or other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
The company names, system names and product names mentioned in this manual
are either registered trademarks or trademarks of their respective companies.
In some cases, trademark symbols such as '
' or '
' are not specified in this manual.
使用前请务必阅读
使用前请务必阅读本资料。阅读后请妥善保管，以便随时使用。此外，本产品的用户
发生变更时，请务必将本资料转交给最终用户。
关于使用时的注意事项，请参照以下手册。
MELSEC iQ-R EtherNet/IP Network Interface Module User's Manual (Startup)
[SH-081913ENG]
MELSEC iQ-R EtherNet/IP Network Interface Module User's Manual
(Application) [SH-081915ENG]
1. 运行环境
*1 EtherNet/IP Configuration Tool的显示语言只支持英语。
但是，因选择按钮的显示等取决于操作系统的语言，所以有可能显示英语以外的语
言。
此外，EtherNet/IP Configuration Tool中无法使用全角字符。
• Windows 10环境下，.NET Framework 3.5 （包括.NET 2.0和3.0）及.NET Framework
4.6 （包括.NET 4.0）被禁用时，需要启用。请参照技术简讯No.FA-A-0207 （英语
版）。
• Windows 8、Windows 8.1环境下，.NET Framework 3.5 （包括.NET 2.0和3.0）及
.NET Framework 4.5 （包括.NET 4.0）被禁用时，需要启用。请参照技术简讯No.FA-
A-0153 （英语版）。
• Windows 7环境下，.NET Framework 3.5 （包括.NET 2.0和3.0）被禁用时，需要启
用。
• 如果使用下述功能，有可能导致本产品无法正常运行。
•Windows兼容模式下的应用程序启动
•用户简易切换
•远程桌面
•Windows XP Mode
•Windows Touch或Touch
•Modern UI
•客户端Hyper-V
•平板模式
•虚拟桌面
• 下述情况下，有可能导致本产品的画面无法正常运行。
•将画面上的文字及其他项目的尺寸更改为默认值 （96 DPI，100％，9pt等）
以外时
•在运行中更改了画面的分辨率时
•设置为多屏显示时
• 在Windows 10、Windows 8.1、Windows 8及Windows 7中，请以“标准用户”或“管
理员”权限使用。
• 本产品中表示小数点的符号使用 （.）。无论控制面板的“小数点”的设置如何，输
入小数点时请输入 （.）。
EtherNet/IP Configuration Tool
安装步骤说明书
本说明书相关注意事项
● 未经三菱电机株式会社许可，禁止以任何形式转载或复制本说明书的部分或全部内
容。
● 本说明书的记载内容尽量跟随软件、硬件的改版进程，但仍有可能无法完全同步。
● 本说明书中记载的内容可能在事先未知会的情况下进行更改，敬请谅解。
项目 内容
个人计算机 基于Microsoft
Windows
下运行的个人计算机
CPU 建议Intel
Core
2 Duo 2GHz以上
必要内存 64位版操作系统时：建议2GB以上
32位版操作系统时：建议1GB以上
硬盘可用空间 250MB以上
显示器 分辨率1024768像素以上
OS
（日语版、英语版、简体中
文版）
*1
• Windows 10 （Home、Pro、Enterprise、Education）
• Windows 8.1、Windows 8.1 （Pro、Enterprise）
• Windows 8、Windows 8 （Pro、Enterprise）
• Windows 7 （Starter、Home Premium、
Professional、Ultimate、Enterprise）
2. 安装步骤
2.1 安装前请确认
• 安装至个人计算机时，请以“管理员”或“Administrator”权限的用户进行登录。
• 安装前，请结束所有运行的应用程序。如果在其他应用程序运行的状态下进行安装，
有可能导致产品无法正常运行。
1. 将取得的压缩文件解压缩。
2. 双击解压缩的文件夹中的“setup.exe”，启动安装程序。
3. 请按照画面指示选择或输入必要事项。
3. 卸载步骤
应通过Windows的控制面板进行卸载。
EtherNet/IP is a trademark of ODVA, Inc.
Intel is either registered trademarks or trademarks of Intel Corporation in
the United States and/or other countries.
Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
The company names, system names and product names mentioned in this manual
are either registered trademarks or trademarks of their respective
companies.
In some cases, trademark symbols such as‘
’or‘
’are not specified in
this manual.
LLUTL/GXLV-O-INSTL-M
