Mitsubishi Electric Predefined Protocol Support Tool For Positioning インストールガイド

タイプ
インストールガイド
1.
2.
2.1
2.2
1.
2.
3.
2.3
3.
Before Using the Product
Please read this document before use. Keep the document in a safe place for future
reference. Make sure that the end users read the document.
For the precautions on using, refer to the following manuals.
1. Operating Environment
*1 When the display language differs between the operating system and the tool,
texts may not be displayed properly.
For details on the display language, refer to the following manual.
Predefined Protocol Support Tool For Positioning Operating Manual
For Windows 10, if .NET Framework 3.5 (including .NET 2.0 and 3.0) or .NET
Framework 4.6 Advanced Services is invalid, it needs to be valid. Refer to
TECHNICAL BULLETIN No. FA-A-0207.
For Windows 8.1, if .NET Framework 3.5 (including .NET 2.0 and 3.0) or .NET
Framework 4.5 Advanced Services is invalid, it needs to be valid. Refer to
TECHNICAL BULLETIN No. FA-A-0153.
For Windows 7, if .NET Framework 3.5 (including .NET 2.0 and 3.0) is invalid, it
needs to be valid.
When the following functions are used, this product may not run properly.
• Application start-up in Windows compatibility mode
• Fast user switching
• Remote desktop
• Windows XP Mode
• Windows Touch or Touch
• Modern UI
• Client Hyper-V
• Tablet mode
• Virtual Desktops
• Unified Write Filter
In the following cases, the screen of this product may not work properly.
• The size of the text and other items in the screen is other than 100% (96 DPI,
9 pt etc.).
• The resolution of the screen is changed in operation.
• Windows theme is changed in operation.
• The multi-display is set.
If the Windows firewall setting is enabled, accessing a CPU module via Ethernet may
not operate correctly. When using a Guest account in Windows 7, disable the
Windows firewall setting.
In this product, the period (.) is used as the symbol of the decimal point. Regardless
of the setting of "Decimal symbol" on the control panel, use the period when enter
the decimal point.
Predefined Protocol Support Tool
For Positioning
Installation Instructions
Manual name Manual number
Predefined Protocol Support Tool For Positioning
Operating Manual
SH-082176ENG
Notice
Reprinting or reproducing the part or all of the contents of this document in any
form for any purpose without the permission of Mitsubishi Electric Corporation is
strictly forbidden.
Although we have made the utmost effort to follow the revisions of the software
and hardware, in some cases, unsynchronized matter may occur.
The information in this document may be subject to change without notice.
Item Contents
Personal
computer
A personal computer on which Microsoft
Windows
operates
CPU
Intel
Core
2 Duo Processor 2GHz or more
Required
memory
64-bit OS: Recommended 2GB or more
32-bit OS: Recommended 1GB or more
Available hard disk
capacity
For installation: 4GB or more free hard disk capacity
For operation: 512MB or more free virtual memory capacity
Monitor Resolution 1024 x 768 pixels or higher
OS
*1
(English version,
Japanese version,
Simplified
Chinese version)
Windows 10 (Home, Pro, Enterprise, Education, IoT Enterprise)
Windows 8.1, Windows 8.1 (Pro, Enterprise)
Windows 7 (Home Basic Home Premium, Professional,
Ultimate, Enterprise)
Required software
package
SW1DNN-SCMPTP: GX Works3 Version 1.055H or later
SW1DNN-SCPMRP: GX Works2 Version 1.24A or later
2. Installation and Uninstallation
2.1 Confirm before installation
Log on to the personal computer as an administrator.
Close all running applications before installation. If the product is installed while other
applications are running, it may not operate normally.
2.2 Installation
1. Unzip the compressed folder.
2. Double-click 'setup.exe' in the unzipped folder to start installation.
3. Select or enter the necessary information by following the on-screen instructions.
2.3 Uninstallation
Uninstall the tool from the control panel of Windows.
3. Installation of USB driver
In order to communicate with a CPU module via USB, a USB driver needs to be
installed.
When a CPU module can not communicate via USB, refer to the following manual to
install a USB driver.
GX Works3 Operating Manual [SH-081215ENG]
GX Works2 Version 1 Operating Manual (Common) [SH-080779ENG]
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Intel is either registered trademarks or trademarks of Intel Corporation in the United
States and/or other countries.
The company names, system names and product names mentioned in this manual
are either registered trademarks or trademarks of their respective companies.
In some cases, trademark symbols such as '
' or '
' are not specified in this manual.
使用前请务必阅读
使用前请务必阅读本资料。阅读后请妥善保管,以便随时使用。此外,本产品的用户
发生变更时,请务必将本资料转交给最终用户。
关于使用时的注意事项,请参照以下手册。
1. 运行环境
*1 操作系统与工具栏的表示语言不同时,可能出现在显示屏上无法正常显示的情况。
关于详细说明请参阅以下手册。
用于定位的通信协议支持工具操作手册
Windows 10环境下,.NET Framework 3.5 括.NET 2.0和3.0)及.NET Framework
4.6 Advanced Services被禁用时,需要启用。请参照技术简讯No. FA-A-0207 英语
版)
Windows 8.1环境下,.NET Framework 3.5(包括.NET 2.0和3.0)及.NET Framework
4.5 Advanced Services被禁用时,需要启用。请参照技术简讯No. FA-A-0153 (英
语版)
Windows 7环境下,.NET Framework 3.5 (包括.NET 2.0和3.0)被禁用时,需要启
用。
如果使用下述功能,有可能导致本产品无法正常运行。
•Windows兼容模式下的应用程序启动
•用户简易切换
•远程桌面
•Windows XP Mode
•Windows Touch或Touch
•Modern UI
•客户端Hyper-V
•平板模式
•虚拟桌面
•统一写入筛选器
下述情况下,有可能导致本产品的画面无法正常运行。
•画面中的文本与其他项目等的尺寸为100% (96 DPI,9pt等)以外时
•在运行中更改了画面的分辨率时
•在运行中更改了Windows的主题时
•设置为多屏显示时
启用Windows防火墙的设置时,通过以太网对CPU的访问有可能无法正常运行。
Windows 7以来宾帐户登录时,应禁用Windows防火墙的设置。
本产品中表示小数点的符号使用 (.)。无论控制面板的“小数点”的设置如何,输
入小数点时请输入 (.)
用于定位的通信协议支持工具
安装步骤说明书
手册名称 手册编号
用于定位的通信协议支持工具操作手册 SH-082187CHN
本说明书相关注意事项
未经三菱电机株式会社许可,禁止以任何形式转载或复制本说明书的部分或全部内
容。
本说明书的记载内容尽量跟随软件、硬件的改版进程,但仍有可能无法完全同步。
本说明书中记载的内容可能在事先未知会的情况下进行更改,敬请谅解
项目 内容
个人计算机 基于Microsoft
Windows
下运行的个人计算机
CPU 建议Intel
Core
2 Duo 2GHz以上
必要内存 64位版操作系统时:建议2GB以上
32位版操作系统时:建议1GB以上
硬盘可用空间
安装时:硬盘的可用空间 4GB 以上
运行时:虚拟存储器的可用空间512MB以上
显示器 分辨率1024×768像素以上
OS
*1
(日语版、
英语版、
简体中文版)
Windows 10(Home、Pro、Enterprise、Education、IoT
Enterprise)
Windows 8.1、Windows 8.1 (Pro、Enterprise)
Windows 7(Home Basic、Home Premium、Professional、
Ultimate、Enterprise)
必要软件包 SW1DNN-SCMPTP: GX Works3 Version 1.055H及以后
SW1DNN-SCPMRP: GX Works2 Version 1.24A及以后
2. 安装·卸载
2.1 安装前请确认
安装至个人计算机时,请以“管理员”或“Administrator”权限的用户进行登录。
安装前,请结束所有运行的应用程序。如果在其他应用程序运行的状态下进行安装,
有可能导致产品无法正常运行。
2.2 安装步骤
1. 将取得的压缩文件解压缩。
2. 双击解压缩的文件夹中的“setup.exe”,启动安装程序。
3. 请按照画面指示选择或输入必要事项。
2.3 卸载步骤
应通过Windows的控制面板进行卸载。
3. USB驱动程序的安装步骤
与CPU模块进行USB通信时,需要安装USB驱动程序。
无法与CPU模块进行USB通信时,请参照以下手册,安装USB驱动程序
GX Works3操作手 [SH-081271CHN]
GX Works2 Version 1操作手册(公共篇) [SH-080932CHN]
Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Intel is either registered trademarks or trademarks of Intel Corporation in
the United States and/or other countries.
The company names, system names and product names mentioned in this manual
are either registered trademarks or trademarks of their respective companies.
In some cases, trademark symbols such as‘
’or‘
’are not specified in
this manual.
SCMPTP-O-INSTL-M
  • Page 1 1

Mitsubishi Electric Predefined Protocol Support Tool For Positioning インストールガイド

タイプ
インストールガイド