Olympus FR-WR ユーザーマニュアル

タイプ
ユーザーマニュアル
FR-WR
JP
2
EN
INSTRUCTIONS
14
FR
MODE D’EMPLOI
26
ES
INSTRUCCIONES
36
DE
BEDIENUNGSANLEITUNG
48
KR
사용설명서
58
CHT 68
TH
คําแนะนําการใชงาน
78
VI
CÁC HƯỚNG DN
88
Model No.: IM013
2
JP
FR-WR
1
2
3
4
5
6
0
7
8
9
a
1
A/B/C ..........P. 7
2
1-15 .........P. 7
3
*
4
...............................P. 4
5
.........................P. 4
6
...............................P. 5
7
X-RCV / ................P. 7
8
BEEP / ..................P. 8
9
...................................P. 3
0
ON/OFF / ..............P. 5
a
*
3
JP
x
350V
x
4 2
4 2
x
4
1
2
+
/
-
3
4
JP
FLST-1
1
1
2
2
3
1
5
JP
x
x
1
ON/OFF /
1
ON/OFF
x
ON/OFF
ON/OFF
60
ON/OFF
6
JP
3
/
B
A
C
+
30m
7
JP
2.4GHz
ON/OFF /
BEEP /
X-RCV /
1
2
ON/OFF
• ON/OFF
3
X-RCV
• X-RCV RCV
• X-RCV X-RCV
4
5
• RCV
• X-RCV
6
8
JP
1
BEEP BEEP
BEEP BEEP
AF
9
JP
10
JP
1
2
3
2.4GHz DSSS
10m
15cm
11
JP
*
1
30m
2.4GHz
15
3
RCV X-RCV
4 2 /
4 2
1 IPX1
*
1
6.4 4
/ *
2
-10ºC 40ºC / 30 90%
/ -20ºC 60ºC / 10 90%
59.1 x 46.1 x 51.0 mm
75g
*1
*2
12
JP
13
MEMOMEMO
14
EN
Thank you for purchasing this Olympus product.
To ensure your safety, please read this instruction manual carefully before use.
In addition, please keep the manual handy for future reference.
Be sure to read the instruction manuals for the ash and the wireless commander
as well.
If you use the product outside the country or region of purchase, you may violate
local regulations. Olympus accepts no liability in this case.
Checking the Contents of the Package
Wireless radiowave receiver: FR-WR
Pouch
Instructions (This manual)
Warranty card
Names of Parts
1
2
3
4
5
6
0
7
8
9
a
1 Group dial (A/B/C) ........................P. 19
2 Channel dial (1-15) .......................P. 19
3 External ash terminal*
4 Latch .............................................P. 16
5 Latch release button .....................P. 16
6 Hot shoe .......................................P. 17
7 X-RCV lamp/button .......................P. 19
8 BEEP lamp/button.........................P. 20
9 Battery compartment cover ...........P. 15
0 ON/OFF lamp/button ....................P. 17
a Tripod socket
* Use the external ash terminal when you connect a commercial ash via a sync cord. Always
attach the cap when you are not using the external ash terminal.
15
EN
x
If you connect an older type of commercial ash with a voltage of approx. 350 V or
higher, the wireless receiver will malfunction.
x
If you connect a ash with a communication terminal that does not meet the
Olympus standard, the wireless receiver may malfunction.
Preparing the Receiver
Inserting the batteries (sold separately)Inserting the batteries (sold separately)
Batteries to use
Choose from the following batteries.
AAA NiMH batteries (x 2)
AAA alkaline dry-cell batteries (x 2)
x
AAA manganese batteries are not usable.
Inserting the batteries
1
Open the battery compartment cover.
2
Insert the batteries.
• Make sure that the polarity (+/-) is
correct.
3
Close the battery compartment cover.
16
EN
Attaching the wireless receiver Attaching the wireless receiver
This procedure describes how to attach the wireless receiver to a separate ash
stand (FLST-1).
If you are attaching the wireless receiver to a commercial shoe adapter, refer to
the instruction manual for the shoe adapter.
1
Hold down the latch release button (
1
), and
slide the latch in the direction of the arrow (
2
).
Latch release button
Latch
2
Insert the receiver all the way into the ash
stand.
Flash stand
3
Slide the latch in the direction of the arrow.
Removing the receiver
Perform Step 1 of the above procedure and remove the receiver from the ash
stand.
17
EN
Attaching the ash to the wireless receiver Attaching the ash to the wireless receiver
If you are attaching a commercial ash to the wireless receiver, refer to the
instruction manual for the ash.
x
Make sure that both the receiver and the ash are turned off.
x
Dirt or moisture on the electrical contacts may cause a malfunction. Wipe off any
dirt or moisture before you attach the ash to the receiver.
1
Insert the ash all the way into the hot shoe of
the receiver.
Hot shoe
Electrical contacts
Turning on the Power
ON/OFF lamp/
button
1
Press the ON/OFF button.
x
If the ON/OFF lamp ashes, the batteries are running very low. Replace the
batteries as soon as possible.
Turning off the powerTurning off the power
Press the ON/OFF button.
Automatic power offAutomatic power off
If approximately 60 minutes elapse with no operations, the power will turn off
automatically. Press the ON/OFF button when you want to use the receiver
again.
18
EN
Radio Wireless Shooting
You can attach a commander to the camera and use the commander as well as
a ash that supports the radio wireless function to control this wireless receiver
through radio communications. This function only works with Olympus products
that support the radio wireless function.
Refer to the Olympus website for information on products that support the radio
wireless function.
Group controlGroup control
You can control up to three groups of receivers. Within each group, the ashes
will re with the same settings. This function allows you to use an Olympus ash
that does not support radio communications as part of a radio communication
system.
Flash with radio wireless function (sold separately) /
Wireless commander (sold separately)
Group B
Group A
Group C
Flash (sold separately)
+
Wireless receiver
Flash with
radio wireless
function
(sold separately)
Flash with radio
wireless function
(sold separately)
Communication distanceCommunication distance
The maximum distance for radio wireless communications with this wireless
receiver is approx. 30 meters (98.4 ft.) (under Olympus measurement conditions).
This distance assumes that there are no obstacles, shielding materials, or
radio interference from other devices.
The communication distance may be shorter depending on the positions of the
devices, the surrounding environment, weather conditions, and other factors.
19
EN
FrequencyFrequency
This product uses the 2.4 GHz band for wireless communications. However,
other wireless devices may use the same frequency.
Setup
ON/OFF lamp/button
BEEP lamp/button
X-RCV lamp/button
Channel dial
Group dial
1
Turn on the ash.
• Refer to the ash manual for details.
2
Press the ON/OFF button to turn on the wireless receiver.
• The ON/OFF lamp will light up.
3
Hold down the X-RCV button to select an operating mode.
• The X-RCV lamp is off: RCV mode (You set the ash control mode and
ash intensity on the wireless commander. This
wireless receiver receives the setting information
and ring signal from the wireless commander.
Then, the ash that is connected to this wireless
receiver res a ash.)
• The X-RCV lamp is on: X-RCV mode (You set the ash control mode and
ash intensity on the ash that is connected to this
wireless receiver. This wireless receiver receives a
ring signal from the wireless commander. Then, the
ash that is connected to this wireless receiver res
a ash with this wireless receiver’s settings.)
4
Turn the group dial to select a communication group.
5
Set the ash control mode and ash intensity.
• RCV mode: Set the ash control mode and ash intensity on the
wireless commander.
• X-RCV mode: Set the ash control mode and ash intensity on the
ash that is connected to this wireless receiver.
6
Turn the channel dial to select a communication channel.
• Select the same channel that you set on the wireless commander.
20
EN
Other settingOther setting
Setting a beeping sound to indicate that the ash is ready to re
1
Hold down the BEEP button until the BEEP lamp lights up.
• To disable the beeping sound, hold down the BEEP button until the BEEP
lamp turns off.
Safety Precautions
Read WARNINGS and CAUTIONS thoroughly to ensure safe usage. These
safety precautions protect the users and others and prevent property damage.
WARNING
Failure to observe the precautions indicated by this symbol
may result in injury or death.
Do not use ash in places where it may be exposed to ammable or explosive
gas. Otherwise, re ignition or explosion may result.
Do not directly solder the product or modify, remodel, or disassemble.
Do not cover the light emitting area of the ash with your hand, and do not
touch the light emitting area after continuous ring. It may burn your skin.
Water and foreign matter inside of the device may cause re or electric shock.
If the device is immersed in or exposed to water or foreign matter is found
inside of the device, turn off the power immediately and remove batteries with
care. Contact your dealer or consult an Olympus Authorized Service Station.
To prevent a traf c accident, do not direct the ash at a person operating a
motor vehicle.
Do not use the ash or AF illuminator in close proximity to others (especially
infants). Keep the ash out of reach of children. Light from the ash can cause
visual impairment.
To prevent a short circuit, do not use batteries with a damaged external seal
(insulation coating).
Do not mix old and new batteries, or batteries made by different manufacturers.
Do not connect substances such as metal to the (+) or (–) of batteries.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Olympus FR-WR ユーザーマニュアル

タイプ
ユーザーマニュアル