Notice
The VR-700 can be placed on a stand (KS-18Z).
• For details on how to assemble the KS-18Z, refer to the KS-18Z owner’s manual.
• When placing the VR-700 on the KS-18Z , first make sure that the cushions (supplied with the stand) have been affixed to the arms of the KS-18Z.
The cushions help prevent the instrument from slipping and falling off.
• When placing the VR-700 on the stand, be careful not to pinch your fingers between the instrument and the stand.
• When lifting the VR-700 onto the stand, make sure to enlist the help of at least one other person.
• Using the VR-700 with any other stand may produce an unstable situation, possibly causing the instrument to fall or overturn, and
resulting in injury or damage.
fig.VKvsKS-G8.eps
* When placing the VR-700 on a stand (KS-G8), see p. 18 in the owner’s manual.
Placing the VR-700 on a Stand (KS-18Z)
Format of MP3 Files Playable on the VR-700
Format
MPEG-1 audio layer 3
Sampling Frequency
44.1 kHz
Bit Rate
32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbps, VBR (Variable Bit Rate)
File Extension
.mp3
A
B
C
Front (keyboard) side
Rear panel side
Top View
Align the front of the
VR-700 with the
front of the stand.
Adjust the width of the stand as necessary
so that rubber feet “B” can be positioned so
they are at the outer side of the arms.
– Please read this in conjunction with the owner’s manual –
Copyright © 2010 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Roland is a registered trademark or trademark of Roland Corporation in the
United States and/or other countries.
VR-700
