Motorola H790 - Headset - Monaural クイックスタートガイド

Quick Start Guide

MOTOROLA

H790

1

your headset

charge it

pair & connect

put it on

turn on & off

battery check

calls

status indicators

tips & tricks

problems?

Safety & General Information

FCC Notice to Users

European Union Directives

Conformance Statement

Contents

2

3

4

8

10

11

12

14

16

17

19

23

34

2

your headset

Take a moment to familiarize yourself with your new Motorola H790 Headset.

Earhook

Charging

Port

Volume

Buttons

Call

Button

Power

Switch

Ear

Speaker

Indicator

Light

Micro-

phone

charge it

3

Charge your headset before using it.

The indicator light is red or yellow while the battery is charging. When the battery

is fully charged, the indicator light turns green.

Note: Headset is not functional while charging.

Note: Your battery is designed to last the life of your product. It should only be

removed by a recycling facility. Any attempt to remove or replace your battery will

damage your headset.

charge it

4

Once charged, let’s get your headset paired and connected to your Bluetooth

phone(s).

pair & connect rst phone

Turn off any Bluetooth devices previously paired with your headset.

Turn on the Bluetooth feature on your phone.

Put headset on your ear (see “wear it” on page 9 for help).

Turn on your headset (see “turn on” on page 10 for help).

The indicator light becomes steadily lit in blue and you hear “ready to pair”.

Follow voice prompts to connect your phone to your headset.

Note: When prompted for the passkey, enter 0000.

pair & connect

5

When your headset successfully pairs with your phone, you hear “pairing

complete”. When connected, you hear “phone 1 connected” and see the indicator

light rapidly ash in blue and purple.

pair & connect second phone (optional)

Turn off rst phone and any other Bluetooth devices previously paired with

your headset.

Turn your headset off (see “turn off” on page 10 for help).

Turn on the Bluetooth feature on your phone.

Put headset on your ear.

Turn on your headset.

The indicator light becomes steadily lit in blue and you hear “

ready to pair”.

pair & connectpair & connect

6

Follow voice prompts to connect your phone to your headset.

When your headset successfully pairs with your phone, you hear “pairing complete”.

When connected, you hear “phone 1 connected” and see the indicator light rapidly

ash in blue and purple.

To connect to both phones, simply turn on the rst phone while the second phone

is connected. When you hear “phone 2 connected”, your headset is connected

to both phones. The last paired phone (your second phone) is now your primary

phone (or “phone 1”) for voice dial functionality.

pair & connect

7

test your connection

Place the headset on your ear.

On one phone, dial the number you want to call and press

Call/Send key.

Repeat for the second phone.

If your phones and headset are successfully connected, you hear ringing on the

headset.

For daily use, make sure your headset is turned on, and your phone’s Bluetooth

feature is on. Your headset and phone will connect automatically.

pair & connectpair & connect

8

choose an earbud

To get the best headset performance, try out all the supplied ear cushions to get

a good t.

choose an ear

Your headset comes ready for the right ear. To change for the left ear:

put it on

9

wear it

Flex the ear hook and loop it over your ear.

Tip: For optimal audio performance and comfort, be sure to position the ear cushion

into your ear canal and point the headset microphone towards your mouth.

put it onput it on

10

turn on

Slide the Power switch to the on position (no red is shown under the switch).

The indicator light ashes blue three times, then ashes in blue and purple (if

connected with a device) or is steadily blue (if ready to be paired).

turn off

Slide the Power switch to the off position (red is shown under switch). The indicator

light ashes three times then turns off.

Power

Switch

Indicator

Light

turn on & off

11

Press and hold both Volume buttons while not on a call.

To save battery power, turn off the headset when you don't use it for an extended

time.

indicator light

red

yellow

green

voice prompt

“battery level is low”

“battery level is medium”

“battery level is high”

talk time

less than 1.5 hours

between 1.5 to 3.5 hours

more than 3.5 hours

battery check

12

calls

TO

...

answer call

reject call

make a voice

dial call

redial last call

mute or unmute

a call

end a call

answer second

incoming call

reject second

incoming call

Press the Call button.

Press and hold a Volume button until you

hear an audio tone.

Press the Call button and you hear an

audio tone.

Press and hold the Call button until you

hear an audio tone.

Press and hold both Volume buttons until

you hear “mute on” or “mute off”.

Press the Call button.

Press and hold a Volume button until you

hear a tone.

calls

13

Tip: When connected to two phones, voice prompts help manage call functions

such as voice dial, redial, and end call. Follow the voice prompts to execute a

function on the desired phone.

Note: Your headset supports both Handsfree and Headset Proles. Accessing

call functions depends upon which profile your phone supports. See the

instructions that came with your phone.

Note: Some call features are phone/network dependent.

callscalls

14

indicator light (with charger plugged in)

indicator light (with charger not plugged in)

red

yellow

green

charging (battery level less than 50% charge)

charging (battery level more than 50% charge)

charging complete

headset indicator

headset status

status indicators

headset indicator

headset status

off

power off

three blue ashes

powering on/off

steady blue

pairing/connect mode

15

Note: After 1 minute on a call or 20 minutes of inactivity, the light stops ashing

to conserve power, but the headset remains on.

status indicators

headset indicator

headset status

rapid blue/purple ashes

connection successful

quick blue ash

incoming/outgoing call on phone 1

quick purple ash

incoming/outgoing call on phone 2

slow blue pulse

connected (on a call)

slow blue ash

standby (connected to one phone)

slow green ash

standby (connected to two phones)

slow red ash

idle (not connected to a phone)

steady red

attempting to connect

quick red ash

low battery

slow purple pulse

connected call muted

16

enable/disable voice prompts

With the headset turned on, press and hold either Volume button and Call button

until you hear “ voice prompts on ” or “ voice prompts off ".

restore to factory settings

Caution: This action erases all pairing information stored in your headset.

To restore your headset to original factory settings, with the headset turned on,

press and hold both Volume buttons and Call button for 10 seconds until the

indicator light is steady blue.

tips & tricks

17

My headset will not enter pairing mode.

Make sure that any devices previously paired with the headset are turned off. If

the indicator light is ashing in blue, rst turn off the other device, then turn the

headset off and on. The indicator light becomes steadily lit in blue and you hear

“ready to pair”.

My phone doesn't nd my headset when searching.

Make sure the indicator light on your headset is steadily lit in blue when your

phone is searching for devices. If not, press and hold the Call button and both

Volume buttons until you hear “ready to pair” and see the indicator light steadily lit

in blue.

My headset will not pair with my phone.

If the indicator light is not steadily lit in blue when your phone is searching for

your headset, you can reset the headset by pressing and holding the Call button

and both Volume buttons until the indicator light is steadily lit in blue. Then follow

pair & connect instructions on pages 4

－

7.

problems?

tips & tricks

18

My headset connected before, but now it's not working.

Make sure the indicator light on your headset is steadily lit in blue when your

phone is searching for devices. If not, press and hold the Call and both Volume

buttons until you hear “ready to pair” and see the indicator light steadily lit in blue.

Support.

If you need more help, contact us at 1-877-MOTOBLU or visit us at

www.motorola.com/Bluetoothsupport or www.motorola.com/

bluetoothconnect.

problems?

19

IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.

READ THIS INFORMATION BEFORE USING YOUR DEVICE.

Approved Accessories

Use of accessories not approved by Motorola, including but not limited to batteries,

antennas, and convertible covers, may cause your mobile device to exceed RF

energy exposure guidelines and may void your mobile device’s warranty. For a list

of approved Motorola accessories, visit our Web site at: www.motorola.com

Batteries & Chargers

Your battery, charger, or mobile device may contain symbols, dened as follows:

Safety & General Information

032374o

Symbol Denition

Important safety information follows.

Do not let your battery, charger, or mobile device get wet.

problems?

ページが読み込まれています...

Motorola H790 - Headset - Monaural クイックスタートガイド

Motorola H790 - Headset - Monaural クイックスタートガイド

他の言語で

関連論文