Motorola H270 - Headset - Over-the-ear クイックスタートガイド

Quick Start Guide

Motorola H270

/ 快速使用手册

1

BEFORE YOU BEGIN

1 CHARGE

Your Headset's Battery

2 START BLUETOOTH FEATURE

Your Phone

3 PAIR

Your Headset and Phone

4 TEST AND USE

NOTES ON SETUP

TURNING HEADSET ON AND OFF

WEARING THE HEADSET

CHANGING FOR USE ON OTHER EAR

MAKING CALLS

INDICATOR LIGHT

AUDIO TONES

TROUBLESHOOTING

European Union Directives Conformance Statement

Contents

2

3

4

5

7

8

9

10

11

12

13

15

16

19

2

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its

instructions.

Take a moment to familiarize yourself with your new H270 Headset.

Call Button

Indicator Light

Volume

Buttons

Earhook

Power Switch

Microphone

Speaker

3

Verify slide switch is in the off position (toward the charging port).

Plug the Motorola charger into the end of the headset.

The indicator light turns red or purple when the battery is charging. It may take

up to 1 minute for the indicator light to turn on. When the headset’s battery is

fully charged (about 2 hours), the indicator light turns blue.

Disconnect the charger.

1 CHARGE

Your Headset’s Battery

1

2

3

Note: Headset is not functional while charging.

Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the

expected life of the rechargeable battery is approximately 400 charges.

4

Press (Menu) > Settings > Connection > Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on

until you turn the feature off.

Note: These steps are for most Motorola phones. For other phones, see your phone’s

user’s guide.

2

START BLUETOOTH FEATURE

Your Phone

Your phone’s Bluetooth feature is off by default. To use your headset, you must turn

on the Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

1

2

3

4

5

3 PAIR

Your Headset and Phone

Before you can use your headset, you must pair (link) it with your phone.

Step A - ENSURE HEADSET IS IN PAIRING MODE

Power on headset by sliding the Power switch towards the microphone to initiate

easy pairing. After a few moments, the indicator light will be steadily lit in blue to

indicate headset is in pairing mode.

Indicator Light

(steadily blue for

pairing)

If the headset does not enter pairing mode, see TROUBLESHOOTING for help.

Power Switch

6

On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth

Link > Handsfree > Look for Devices.

The phone lists Bluetooth devices it ﬁnds.

Select Motorola H270.

Select OK or Yes to pair your headset with your phone.

Enter the passkey: 0000

Select OK.

When your headset successfully pairs and connects with your phone, the

indicator light changes from steadily lit to ﬂashing blue and purple.

Note: These steps are for most Motorola phones. For other phones, see your phone’s user’s

guide.

3 PAIR

Your Headset and Phone

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET

For most Motorola phones:

1

2

3

4

5

7

Place the headset over your ear.

On the phone, dial the number you want to call and press SEND key on your

phone.

If your phone and headset are successfully paired, you will hear ringing on the

headset.

After you have successfully paired your phone and headset, you don’t need to

repeat these steps. For daily use, ensure that your headset is turned ON and

that your phone’s Bluetooth feature is ON.

4 TEST AND USE

Your phone and headset are now paired and ready to make and receive calls.

To make a call:

1

2

8

NOTES ON SETUP

Note: If desired, your headset can be restored to original factory settings. This action will erase

all pairing information stored in your headset. Thus, you will need to pair your phone and headset

again (see step 3).

Note: To restore your headset to original factory settings, press and hold both Volume and Call

buttons at the same time and slide Power switch to ON.

9

TURNING HEADSET ON AND OFF

To turn your headset on, slide the switch toward the microphone. The indicator

light ﬂashes blue three times, then ﬂashes in blue and purple (if connected with a

device) or is steadily blue (if ready to be paired).

To turn your headset off, slide the switch toward the charging plug. The indicator

light ﬂashes three times then turns off.

Power Switch

Indicator

Light

10

WEARING THE HEADSET

To wear your headset, ﬂex the earhook and loop it over your ear as shown.

Be sure to position the ear cushion into your ear canal for optimal audio performance

and comfort.

11

Gently lift and pull the top of the earhook

up and off speaker stem.

Flip the headset over.

Attach the earhook to the speaker stem.

CHANGING FOR USE ON OTHER EAR

You can wear your H270 headset on your left or right ear. The headset comes ready

for the right ear. To change the headset for the left ear:

1

2

3

12

Function Action

Receive a call Tap the Call button

Reject a call Press and hold a Volume button

until the ringer stops

End a call Tap the Call button

Make a voice dial call Tap the Call button and wait for

voice prompt

Answer second incoming Use phone to answer

call

(follow your phone’s instructions)

MAKING CALLS

Note: Your H270 supports both Handsfree and Headset Proﬁles. Accessing call functions depends

upon which proﬁle your phone supports. See your phone’s user’s guide for more information.

Note: Some features are phone/network dependent.

13

INDICATOR LIGHT

Headset Indicator Headset Status

Red Charging (battery level less than

70% charge)

Purple Charging (battery level more

than 70% charge)

Blue Charging complete

With the Charger Plugged In

Note: Your battery is designed to last the life of the product. It should only be removed by a

recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE YOUR BATTERY WILL DAMAGE THE

PRODUCT.

14

Note: After 30 minutes on a call or of inactivity, the light stops ﬂashing to conserve power, but the

headset remains on.

Headset Indicator Headset Status

Off Power off

Three blue ﬂashes Powering on/off

Steady blue Pairing/connect mode

Rapid blue/purple ﬂashes Connection successful

Quick blue ﬂash Incoming/outgoing call

Slow blue pulse Connected (on a call)

Slow blue ﬂash Standby (not on a call)

Slow red ﬂash Idle (not connected to phone)

Steady red Attempting to connect

Quick red ﬂash Low battery

With No Charger Plugged In

INDICATOR LIGHT

15

Audio Tone Headset Status

Ascending tone Powering on

Two descending tones Powering off

Ring tone Incoming call

Short tone when Volume level (high,

pressing Volume button medium, or low)

High/low tones Low battery

repeated every 60 sec.

No audio indications; Out of range

deteriorating quality

Two ascending tones Connected to phone

AUDIO TONES

16

TROUBLESHOOTING

My headset will not enter pairing mode.

Make sure that any devices previously paired with the headset are turned off. If the

indicator light is not steadily lit in blue, turn off both the other device and headset,

wait 10 seconds, then turn headset back on. Wait for the indicator light to become

steadily lit in blue, indicating the headset is now in pairing mode.

My phone doesn’t ﬁnd my headset.

Make sure the indicator light on your headset is on (lit in blue) and steady when your

phone is searching for devices (see step 3).

My headset worked before but now it’s not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone (see

step 2). If the Bluetooth feature was turned off or was turned on only temporarily,

you may need to restart the Bluetooth feature (see step 2) and pair your phone and

headset again (see step 3).

17

Motorola, Inc.

Consumer Advocacy Ofﬁce

1307 East Algonquin Road

Schaumburg, IL 60196

www.motorola.com

www.motorola.com/Bluetoothsupport

1-877-MOTOBLU (Motorola Bluetooth Support)

1-800-331-6456 (United States)

1-888-390-6456 (TTY/TDD United States for hearing impaired)

1-800-461-4575 (Canada)

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofﬁce. The use

of wireless devices and their accessories may be prohibited or restricted in certain areas. Always

obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned

by their proprietor and used by Motorola, Inc. under license. All other product or service names are

the property of their respective owners.

©

Bluetooth QD ID: B014546

Guide Number: 68003561006

18

PRC 400-810-5050

TWN 886-2-2705-1811

HK 852-25063888

Australia 1300 138823

New Zealand 0508 668 676

Singapore 1800 882 8828

Malaysia 1800 806 008

Philippines 1800 1651 0415

India 1800 11 1211/3902 6686

Thailand 02 3518666

Indonesia 021 5754533

Vietnam 04 9331080/08 9144146

South Africa 0860 10 10 39

Turkey 0212 317 45 95

This symbol on a Motorola product means the product should not be disposed of with

household waste.

Please do not dispose of mobile telephones or electrical accessories, such as chargers or

headsets, with your household waste.

19

Hereby, Motorola declares that this product is in compliance with:

• The essential requirements and other relevant provisions of Directive

1999/5/EC.

• All other relevant EU Directives.

The above gives an example of a typical Product Approval Number.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/

EC (to R&TTE Directive) at www.motorola.com/rtte. To ﬁnd your DoC, enter the

product Approval Number from your product’s label in the “Search” bar on the

web site.

European Union Directives

Conformance Statement

Product

Approval

Number

ページが読み込まれています...

Motorola H270 - Headset - Over-the-ear クイックスタートガイド

Motorola H270 - Headset - Over-the-ear クイックスタートガイド

他の言語で

関連論文

その他のドキュメント