Panasonic TK-CJ21 ユーザーマニュアル

English

TK-CJ21

TK-CJ11/TK-CJ01

Instruction Manual

Water Purier

Household Use

TK-CJ21

TK-CJ11

TK-CJ01

Model No.

Thank you very much for purchasing this Panasonic product.

n Please read through this instruction manual carefully before using the product to ensure

proper operation.

n

Be sure to read the “Safety precautions” (pages 2 and 3) before using the product.

n Check that the purchase date has been entered on the warranty, and keep the warranty

in a safe place together with the instruction manual.

n Bear in mind that Panasonic will not be liable for any product malfunctioning or

accidents which result from the failure to install or operate the product properly.

Replacement cartridges for this water purifier:

●

For TK-CJ21/TK-CJ11 : Model No. TK-CJ21C1

● For TK-CJ01 :

Model No. TK-CJ01C1

How to Replace the Cartridge (P.25)

Contents

Safety precautions ......................... 2

Tips to ensure proper operation ... 4

Product composition ..................... 5

Checking the main unit and

accessories ................................. 6

Names and functions of the parts

... 7

Steps to take before

installing the product ................. 8

Installation procedure ................. 10

Operation (How to run water) ......18

Maintenance ..................................20

Cartridge replacement ..................23

Troubleshooting ............................26

Frequently Asked Questions (Q&A) ...

28

Optional accessories ....................29

Specifications ................................30

2

Safety precautions

These must be observed

Please be sure to observe these precautions to prevent injury to people or

damage to property.

■ The following precautions are classified according to the extent of

possible harm or damage resulting from misuse of the product.

WARNING

If not observed, may result in death or serious injury.

CAUTION

If not observed, may result in minor injury or property

damage.

WARNING

nDo not disassemble

● Do not attempt to disassemble, repair or alter this product.

Doing so may result in fire or electric shock.

• Please consult with your dealer about the repair of the product.

nWater used

● This product does not have sterilizing capability and cannot remove harmful

substances other than those indicated (See page 24), so drinking unfit (non-

potable) water may cause health problems.

n[TK-CJ21 only] Prevention of accidental ingestion

● Keep coin type lithium batteries out of the reach of babies and small children.

The battery may be accidentally swallowed.

•If a battery is swallowed, consult a physician immediately.

3

English

CAUTION

nUse / Storage of purified water

● Do not use purified water to raise fish.

The environment may deteriorate, possibly causing the fish to die.

● Dispose the water inside the purifier before use.

● Every day before using the product for the first time, allow about 0.7 liter of water to

pass through it (This will take about 20 seconds).

● If the product has not been used for two or more days, allow about 6 liters of water to

pass through it (This will take about 3 minutes).

If this is not observed, the health condition may deteriorate.

● When storing purified water, store it in clean airtight containers at most for a day

at room temperature and at most for two days in a refrigerator.

If not observed, the water quality may deteriorate and cause health problems since

disinfectants (such as chlorine) have been removed from the water.

nHandling / Prevention of accidental ingestion

● Do not block the purified water outlet.

Doing so may result in water leakage or malfunction.

● Do not connect a hose or other appliance to the purified water outlet.

Doing so may result in malfunctioning of the hot-water supply system.

● Do not connect the product to a hot-water supply system which does not have a

non-return valve (a valve for preventing the backflow of water).

Doing so may result in malfunctioning of the water heater.

● Do not connect the product to a mains stop type of water heater (with a structure

that makes it impossible to shut off the water at the hot water outlet such as an

instantaneous water heater).

● Keep the accessories out of the reach of babies and small children.

The accessory may be accidentally swallowed.

● If an accessory is swallowed, consult a physician immediately.

n[TK-CJ21 only] Use of the battery

● Do not expose the coin type lithium battery to flame or to excessive heat.

The battery may explode and cause an accident.

● Be sure to insert the coin type lithium battery correctly by matching the “+” and “–

” markings.

If the “+” and “– ” are not correctly oriented, the battery may explode or leak and cause

an accident. (See page 16)

● Do not wet the coin type lithium battery or the battery compartment interior.

The battery may explode or leak and cause an accident.

4

Tips to ensure proper operation

n Do not pass the following kinds of water through the product.

(Doing so will significantly shorten the cartridge life.)

● Very cloudy water

● Water with a high red rust content

n The temperatures of the water that can be used for this product are

shown in the table below. Be sure to follow these temperatures.

(If not observed, may result in malfunction or may cause total trihalomethanes

absorbed in the cartridge to be released.)

Selector lever position Water temperature

Purified Under 35 °C

Unpurified

Under 80 °C

Shower

n Do not install the water purifier in the following places.

(If not observed, may result in a malfunction)

● Near heat sources such as stoves (Over 60°C)

If not observed, the case may be deformed by the heat, etc.

● Under direct sunlight or exposed to rain and wind

If not observed, may cause a malfunction, breakdown, etc.

● Places where water may freeze

If not observed, may cause water leakage, the cartridge to crack, etc.

● Places where it may be oil-stained

If not observed, may cause the case to crack, etc.

5

English

● With LCD display

● Cartridge replacement

guidelines:

About 1 year

● Cartridge replacement

guidelines:

About 1 year

● Cartridge replacement

guidelines:

About 6 months

● Except for limited exceptions, TK-CJ11/TK-CJ01 are used for the water purifier

illustrations in this manual.

TK-CJ21 TK-CJ11

TK-CJ01

Product composition

6

Installation Adaptor

(with 4 screws)

Bushing

(with gasket)

[TK-CJ21 only] Coin type lithium battery

Model No.: CR2032 (Commercial item)

● The battery included in the package is for test use and may have a short life.

Please refer to page 16 for how to insert the battery before using the product.

TK-CJ21 TK-CJ11 TK-CJ01

Selector lever

Adaptor A

Cartridge

LCD display

Cartridge

If any items are missing, please contact the dealer from whom you purchased the

product.

Package items Items included in the box

n Water purifier

Checking the main unit and accessories

n Supplied accessories

7

English

[View from below]

The illustrations show examples for TK-CJ11/TK-CJ01.

LCD display

Displays remaining cartridge and

battery levels.

(P16, 18, 23)

Selector lever

For selecting the type of water.

Cartridge

Filters the water.

Selector lever

For selecting the type

of water.

Cartridge

Filters the water.

Purified

water outlet

Purified water is

discharged.

Unpurified

Water Shower

hoses

Unpurified Water Outlet (straight)

The water may look white because air is taken in

discharging water to moderate the water flow.

Selector lever position indicator

Displays the current lever position.

Purified water is discharged from

the purified water outlet.

Unpurified water (tap water) is

discharged.

TK-CJ21

TK-CJ11 TK-CJ01

Names and functions of the parts

8

Steps to take before installing the product

n Faucets onto which the product can be installed

● Faucets with a thread on the outside

(See page 6)

Thread diameter:

22 mm

Outside

thread

6 mm or

more

6 mm or

more

●

Faucets with a thread on the inside

(See pages 8 and 9)

Thread diameter:

24 mm

Inside

thread

● Faucets without an aerator (See pages 10 and 11)

Flared:

13 mm or more, less than 24 mm

more than 10 mm

Diameter of faucet end:

13 mm or more, less than 24 mm

more than 10 mm

n Faucets that require an optional accessory to install the product

With the following kinds of faucets, an optional accessory is required to install the

product. Purchase the optional accessory from your dealer.

For details on installation, read carefully through the instructions that accompany the

accessory.

● Large faucets

Optional accessory

Large-diameter Installation Adaptor

Model No.: P-06JRC

Diameter of faucet end:

24 mm to 32 mm

9

English

n Faucets onto which the product cannot be installed

Bear in mind that it will not be possible to install the product onto custom designed

faucets or faucets with the wrong thread diameter (which is not 22 mm) or wrong pipe

diameter in addition to what is shown below. Neither is it possible to install the product if

the main unit comes into contact with the faucet.

● Plastic faucets

Installation will cause the plastic area at the end

of the faucet to crack.

Plastic

• The product can be

installed onto faucets

with a metal thread.

● Faucets with a shower nozzle

● Faucets whose end area measures

10 mm or less

● Faucets with a sensor

10

Installation procedure

● Do not connect the product to a faucet used solely for hot water.

Faucets with an outside thread (thread diameter: 22 mm)

Types of faucets

Outside thread Outside thread

Aerator

(Do not use.)

Aerator

(Do not use.)

1

Remove the mounting nut and adaptor.

The parts below must be returned

to their original positions when they

have been unintentionally removed.

Filter

Gasket washer

(metal)

Adaptor (with gasket)

Mounting nut

Main unit

gasket

11

English

2

Remove the aerator, pass the mounting nut over the faucet, and

install the adaptor.

● The adaptor should be screwed on straight. Screwing it on tilted may strip the

threads, resulting in water leaks.

Mounting

nut

Mounting

nut

Adaptor Adaptor

Aerator

Outside

thread

Outside

thread

Mounting nut

Adaptor

3

Turn the mounting nut manually,

and tighten it securely.

Important

● Do not use a tool to tighten up the

mounting nut. (Doing so may damage

the mounting nut.)

● Do not turn the main unit to tighten up

the mounting nut. (Doing so will apply

a powerful force to the thread, possibly

damaging the main unit.)

Upon completion of installation, check that the main unit does not easily rotate

and that there is no play.

12

Installation procedure

1

Remove the mounting nut and adaptor.

The parts below must be returned

to their original positions when they

have been unintentionally removed.

Filter

Gasket washer

(metal)

Adaptor (with gasket)

Mounting nut

Main unit

gasket

● Do not connect the product to a faucet used solely for hot water.

Faucets with an inside thread (thread diameter: 24 mm)

Types of faucets Accessories used

Inside thread

Aerator

(Do not use.)

Bushing

(with gasket)

13

English

2

Screw in the bushing. Insert

into the adaptor.

Adaptor

Gasket

Bushing (accessory)

3

Attach the mounting nut and

adaptor.

● The adaptor should be screwed on

straight. Screwing it on tilted may strip

the threads, resulting in water leaks.

Adaptor

Gasket

Mounting nut

4

Turn the mounting nut manually,

and tighten it securely.

Important

● Do not use a tool to tighten up the

mounting nut. (Doing so may damage

the mounting nut.)

● Do not turn the main unit to tighten up

the mounting nut. (Doing so will apply

a powerful force to the thread, possibly

damaging the main unit.)

Upon completion of installation, check that the main unit does not easily rotate

and that there is no play.

14

Installation procedure

1

Remove the mounting nut and adaptor.

The parts below must be returned

to their original positions when they

have been unintentionally removed.

Filter

Gasket washer

(metal)

Adaptor (with gasket)

Mounting nut

Main unit

gasket

● Do not connect the product to a faucet used solely for hot water.

Faucets without an aerator

Types of faucets Accessories used

● Flared faucets

more than 10 mm

13 mm or more,

less than 24 mm

Installation Adaptor

(with 4 screws)

● Straight faucets

more than 10 mm

13 mm or more,

less than 24 mm

15

English

2

Remove the four screws of the installation adaptor, install the

installation adaptor, and tighten it using the mounting nut.

1. Remove the four

screws.

2.

Tighten the installation

adaptor using the

mounting nut.

Installation adaptor

Mounting nut

3

Loosely tighten the screws,

and loosen the mounting nut.

1. Loosely tighten

the screws (x4).

2. Loosen the mounting nut until a 3 mm to 4 mm

clearance forms between the mounting nut and

main unit.

4

While pushing the main unit up, install it onto the faucet.

1.

Tighten the two rear screws by

hand until they touch the pipe

in such a way that the pipe

is positioned in the center of

the installation adaptor.

2.

Use a screwdriver

to tighten the two

remaining screws.

Pipe (faucet)

Rear

screws

Installation

adaptor

Remaining

screws

5

Turn the mounting nut manually, and

tighten it securely.

Important

●

Do not use a tool to tighten up the mounting nut.

(Doing so may damage the mounting nut.)

●

Do not turn the main unit to tighten up the

mounting nut. (Doing so will apply a powerful force

to the thread, possibly damaging the main unit.)

Upon completion of installation, check that the main unit does not easily rotate

and that there is no play.

16

Installation procedure

[TK-CJ21 only] How to insert a lithium battery in the water purifier (To replace battery)

TK-CJ21 uses one coin type lithium battery to power the sensor for the cartridge

replacement guideline.

1

Open the battery cover.

● Before opening the battery

cover, carefully wipe the unit

free of all moisture.

Battery cover

Slot

Turn the cover counterclockwise with a coin-like object.

(Do not use the battery included in the package)

2

Insert battery.

● When replacing the battery, remove the old battery.

● When the battery is inserted, all items displayed on

the LCD will light up for about one second, followed

by the cartridge replacement guideline.

●

When a battery that is almost exhausted is inserted,

the battery replacement mark (

) will appear.

Battery

The “+” mark must be visible

3

Close the battery cover.

Battery cover

Slot

2. Turn clockwise

1. Align the marks

n Battery replacement timing

Replace the battery when the battery replacement mark ( ) appears on the LCD.

Flashes

It is almost time to

replace the battery.

●

Approximate battery life

• About 1 year

• The battery included in the package is

for test use and may have a short life.

●

Replacement battery

•

This product uses the commercially available,

coin type lithium battery CR2032.

Stays on

The battery needs to

be replaced.

Please replace it with a

new battery.

Note

●

Replacing the battery will not reset the cartridge replacement guideline.

Important

●

About battery disposal

Please dispose of used battery according to the local government regulations.

17

English

Checks after installation

Please carry out checks to ensure proper installation and operation.

1

Run purified water for about 3 to 4

minutes to expel the air inside

the main unit.

How to run puried water

(See page 18 for details)

1. Set the selector lever to ‘Purified’

2. Turn on the water faucet to let the

water flow

2

Check the items below and take respective

measures in case of abnormality.

Water purifier connection

Faucet

3

Mark the month when the cartridge was

replaced using a permanent marker.

(See page 23 for guidelines on cartridge

replacement)

Example:

Replaced in

March

Check items

Inspection points and measures in case of abnormality

Reference page

Is water leaking from the

purifier connection area?

Is the water purifier installed securely onto the faucet?

●

→ Reconfirm the ‘Installation Procedures’ to

install the product securely.

* If the adaptor is loose, rotating the purifier

will tighten up the mounting.

Are the parts inside the water purifier assembled properly?

●

→Assemble the parts properly.

10-15

Is the end of the faucet (such as insulation

●

cap) chipped or cracked?

→Consult a plumber.

─

Is water leaking from the

faucet?

Is the faucet gasket being used an old one?

●

→Consult a plumber.

─

Selector

lever

18

Operation (How to run water)

Using purified water

Always use water with a temperature under 35°C.

(If not observed, may result in cartridge malfunction.)

●

If water above 35°C is accidentally used, allow water to flow to the purified side for about

20 seconds.

1

Set the selector lever to ‘Purified’.

Selector lever

2

Turn on the water faucet to let the

water flow.

3

When finished, turn off the water

faucet.

During use For 10 seconds after

turning off the faucet

10 seconds after turning

off the faucet

(Animation display)

Displays the timing for cartridge

replacement with a remaining

volume that can be purified. (P.23)

To conserve battery power, the

LCD will shut off about 10 seconds

after turning off the faucet.

(Turns back on when water

passes again)

●

When the water flow is 0.6 liter/minute or less, the water is considered to have been

turned off and the remaining volume that can be purified is displayed.

LCD

display

19

English

Using unpurified water (tap water)

Always use water with a temperature under 80°C.

(If not observed, may result in malfunctioning of the water purier.)

1

Set the selector lever to ‘Shower’ or

‘Unpurified’.

Shower

Selector lever

2

Turn on the water faucet to let the

water flow.

Note

●

If the shower does not come out uniformly,

turn on the water faucet to increase water ow.

Unpurified

Selector lever

3

When finished, turn off the water

faucet.

20

Maintenance

Regular maintenance

Moisten and wring a soft cloth, and clean the product with it.

Unpurified

water outlet

(Unpurified water

outlet cover)

Purified water outlet

(Purified water outlet cover)

●

The illustration is an example for TK-CJ11/TK-CJ01.

Note

● Do not use detergents,

cleansers, paint thinners,

benzine, alcohol, kerosene, etc.

If used by accident, wipe the

product with a damp cloth to

remove the detergent, etc. on

the surface.

(The detergent may get mixed

in the water, cause the resin to

crack or lead to discoloration/

deformation)

● Do not use a metal brush, etc.

(Doing so may cause scratches)

n Unpurified water outlet

●

Clean the stains(*) on the unpurified water outlet using a brush such as a toothbrush.

● The inside areas can be cleaned by removing the unpurified water outlet cover.

2

Unpurified water

outlet cover

(Turn to remove)

To mount the cover

1. Align the mounting

marks

2. Turn it to the fixed

position

*Washings splash remaining on the product may cause stains and mold growth.

Cleaning after each use or regular cleaning is recommended.

n Purified water outlet

●

The inside areas can be cleaned by removing the purified water outlet cover.

Purified water outlet cover

(Turn to remove)

n In case of a suspension of water supply

● The product cannot be used.

● If water supply is cut off during use, turn off the faucet.

● When water supply is resumed, set the selector lever to ‘Unpurified’ or ‘Shower’ and

run unpurified water (tap water) to expel the air and turbid water inside the main unit.

Once this is done, the product can be used normally. (Allowing air and turbid water to

pass through the purified side will significantly shorten cartridge life)

ページが読み込まれています...

Panasonic TK-CJ21 ユーザーマニュアル

このマニュアルも適しています

Panasonic TK-CJ21 ユーザーマニュアル

他の言語で

その他のドキュメント