Philips ADR90BLX1 ユーザーマニュアル

User manual

English 5

简体中文 21

ภาษาไทย 37

ADR900

Automotive

Driving Recorder

1 Product Overview ............................................................................ 5

2 Quick Start ......................................................................................... 6

2.1 Insert the Memory Card.................................................. 6

2.2 Install in Vehicle .................................................................. 6

2.3 Automatic Power On/Off ................................................ 8

2.4 Manual Power On/Off ...................................................... 8

2.5 Manual Voice Recording Off/On ..................................... 9

2.6 Remove the Memory Card ............................................. 9

2.7 About Micro SD Card ...................................................... 9

3 User Interface .................................................................................... 9

4 System Setting ..................................................................................12

4.1 Set Date and Time ...........................................................12

4.2 Function Settings .............................................................12

5 Operating Instruction ...................................................................14

5.1 Recording Videos .............................................................14

5.2 Playback Videos ................................................................14

5.3 Deleting Videos ................................................................15

5.4 Protecting Videos ............................................................. 16

6 Add-on Functions ...........................................................................17

6.1 WaveGuard

®

Parking Monitoring .................................17

6.2 Driver Fatigue Alert ........................................................ 17

7 TechnicalSpecication...................................................................19

8 Disclaimer ......................................................................................... 20

Table of Contents

5

11

Product Overview

1. Bracket Holder

2. Lens

3. Micro SD card Slot

4. Slide Switch (ON/OFF)

5. Enter Button (OK)

6. Up Button (▲)

7. EasyCapture Button/

Return( )

8. Micro USB Port

9. Status Indicator

10. Mini HDMI Port

11. Down Button/Voice

Recording On/Off (▼)

12. Microphone

13. OBD Cable

14. WaveGuard

®

Indicator

15. DC Converter Box

16. Speaker

1

14

8

10

15

2

9

3

7

6

5

4

16

13

12

User manual x 1

OBD Cable x 1Bracket x 1

Cable Clip &

Sticky tape x 5

User manual

English 5

ࡩ฼ᇓ໗ 21

ADR900

Driving

Recorder

Attention: 1. This device is equipped with an OBD power adapter.

The OBD is the On Board Diagnostics interface of the car and it

can provide constant power supply for the device.

2. To find your car’s OBD port, please refer car’s user manual or ask

the car dealer.

3.Please do NOT operate the device while driving!

4.Please take TF (Micro SD) out as earlier as possible, to prevent

important videos overwritten!

6

Quick Start

2.1 Insert the Memory Card

1. Insert the memory card with the gold contacts facing to the

front of the device.

2. Push the memory card until it clicks into place, and slide the

switch to ON.

2.2 Install in Vehicle

1. Peel off the protective plastic film from both the bracket and Lens.

7

3. Mount the device after 24 hours. Attach the bracket to the

device. Slide it into the bracket holder until you hear a click.

4. Loose the knob to adjust the device to proper position. Then

tighten the knob to make sure the device securely locked.

Attention: 1.Please execute the pasting of the bracket only

when the environment temperature is 18~38℃, or switch on

car air conditioner.

2.The device should be installed in a position where should not

block driver's view.

2. Please make necessary attempts to find a pasting position where

the portion of windscreen in front of device’s lens can be cleaned

automatically by the vehicle windscreen wiper, and the status

indicator of device can be easily captured by the eyes of the driver.

Please do clean the pasting surface of glasses beforehand.

8

5. Connect the micro USB port of OBD cable to the Micro USB

port of the device.

6. Plug the OBD cable to the OBD socket of your vehicle.

7. Paste the DC converter box of OBD cable near the device.

2.3 Automatic Power On/Off

1. Once the power of the vehicle is on, the device automatically turns on.

2. If you disconnect the OBD cable, the device automatically turns off.

2.4 Manual Power On/Off

1. To turn on the device, slide the switch to ON.

2. To turn off the device, slide the switch to OFF.

Attention: 1. The location of most cars’ OBD port is in area A, B,

C, D or E. 2. To avoid OBD cable hanging unsafely or extruding

higher than 10mm in car cabin, PLEASE USE CABLE CLIPS TO

FIX OBD CABLE! 3.The mounting of the device and OBD cable

should NOT interfere the normal operation of vehicle's original

equipments, such as airbag etc.

A

B

D

E

C

1

9

8

16

1

9

8

16

9

2.5 Manual Voice Recording Off/On

1. When the setting of voice recording

in System Setting is OFF, press ▼

to switch on voice recording.

2. When the setting of voice recording

in System Setting is ON, press ▼ to

switch off voice recording.

2.6 Remove the Memory Card

Slide the switch to Off, and push to eject the memory card out

of the slot.

2.7 About Micro SD Card

1. Please use Micro SD card with the capacity at least 8GB, Class10

2. Be sure to format Micro SD card using the device before the usage.

3. The relationship between card capacity and recording time:

Micro SD

Card Capacity

Video Resolution

(720P/30FPS) (720P/60FPS) (1080P/30FPS)

32GB 520 minutes 340 minutes 320 minutes

64GB 1040 minutes 680 minutes 640 minutes

10

Notes:

1. If vehicle is not be used over a month, please do disconnect

OBD cable to avoid the possible over power consumption of

vehicle battery.

2. Please use the dedicated OBD cable to avoid noncompliance

with the device.

3. Once connected to a PC through USB, the device only allows

data transferring.

4. To maximize parking monitoring time, you need

• Set video resolution to 720p, to double the valid monitoring

time of 1080p.

• Use 64G TF card, to double the valid monitoring time

of 32G TF.

• Set parking monitoring range to "near", to extend the

valid monitoring time 10~30%.

5. Every TF card has a limited lifetime, especially used for high

volume data read/writing, in the high vibration & high

temperature car environment,

• Please use only recommened TF card;

• When frequently prompting "SD slow speed, format or

replace it", please replace with a new one.

11

User Interface

No. Description

1 Emergency recording status indicator

2 Voice recording ON/OFF indicator

3 WDR(Wide dynamic range) ON/OFF indicator

4 Video resolution indicator

5 Video recording/stop status indicator

6 Driver fatigue alert icon

7 Driver fatigue index

8 ISO value

9 Date & Time stamp

10

Status indicator

- Blue: Video Recording status

- Red:

Emergency recording status (when the EasyCapture button is pressed)

- Off: Non-recording status

87

1

2

5

7

3

4

6

8

9

10

12

System Setting

Press OK to show the main menu, and set different functions of

the device.

4.1 Set Date and Time

1. Press OK to open the main menu.

2. Press ▲/▼ to select Date&Time icon

and press OK to enter date and time

setting Menu.

3. To adjust date and time field,

press OK to select the field.

4. Press ▲/▼ to select the value.

5. Repeat steps 3-4 to adjust other fields.

6. Press to save your changes.

4.2 Function Settings

No.

Function

Menu

Icon

Description

1 Video

Watchandoperatenormalandemergencyvideoles.

userscanplay,pause,delete,lock,orunlockthevideoles.

2 Resolution

Set the video resolution to Full HD 1080P(FHD), HD

Premium(60FPSHD+) or HD Premium(HD+).

3

WDR (Wide

Dynamic

Range)

Switch on/off WDR function.

13

4

Collision

Detection

Select the sensitivity level of collision detection to

high / middle /low /off.

5

Date/Time Set date and time for the device

6

LCD Auto

Off

Set the time before the LCD is turned off automatically, or

set the LCD always on.

7

Format

Format your Micro SD Card.

8

Language Chinese, English are available for selection.

9

Voice

Recording

Switch on/off voice recording function.

10

EV Value Manually adjust the exposure value.

11

Time Stamp Switch on/off date & time watermark on the video.

12

Parking

Monitoring

Set the protective range of parking monitoring as far/

middle/near.

13

Driver

Fatigue

Alert

v Switch on/off driver fatigue alert function.

14

Default Reset all device settings to factory default ones.

15

About Firmware version, and other related product information.

14

Operating Instruction

5.1 Recording Videos

5.1.1 Normal Video Recording

When the engine of the vehicle

is on, the device automatically

turns on and starts recording

continuously. When the engine

of the vehicle is off (parking

status), video recording will stop

automatically. But as long as any

moving object at a reasonable

range in front of the device is

detected, WaveGuard

®

indicator

will ash and then video recording function will be activated immedi-

ately. If no any further moving event happens in 10 seconds' time, the

video recording function will be shutdown again. All these video les

will be saved into the Normal video folder.

5.1.2 Emergency Video Recording

1. When the Collision Detection function is activated, the device

will automatically detect any collision events, and create an

emergency video le and save it into the Emergency video

folder. While driving, the emergency video clip will show video

before and after that event. While parking, the emergency video

clip can only show video after an event.

2. During video recording status, you can manually create an

Emergency Recording, to secure a video le of any

interesting moment with the EasyCapture buttons .

3. To ensure the effective protection time of parking monitoring,

the number of emergency les are restricted to 12. If that limit is

exceeded, the older ones would be deleted automatically. In that

case, please BACKUP before the vehicle engine is started.

5

15

5.2 Playback Videos

1. Press OK to enter the main

Menu.

2. Press ▲/▼ to select Video

icon and press OK.

3. Press ▲/▼ to select Normal

or Emergency Video folder

and press OK.

4. Press ▲/▼ to nd the desired

video le and press OK, and

then select Play to play it.

5. During playing video, press OK to pause, press ▲ to

fast forward, press ▼ to fast backward, or press emer-

gency button to return.

5.3 Deleting Videos

1. Press ▲/▼ to nd the desired

video le and press OK, and

then select Delete to remove it.

16

2. Select Delete All to delete all

unlocked video les.

3. A conrmation message appears on the screen, press ▲/▼ to

select YES and press OK to conrm deletion.

5.4 Protecting Videos

To secure videos against being overwritten,

1. Press ▲/▼ to nd the desired video

le and press OK.

2. Press ▲/▼ to select Lock and

press OK.

3. Return to video list automatically, and

the selected video is protected.

4. Use same method to lock/unlock other video files.

17

Add-on Functions

6

6.1 WaveGuard

®

Parking Monitoring

To protect your vehicle continuously during parking status, the

device will start recording and save to Normal video folder

whenever it detects moving objects. And video recording function

will be shutdown automatically to conserve vehicle battery power

when there is no moving objects detected. If the device detects

any collisions during parking status, it will start video recording and

save to Emergency video folder.

6.2 Driver Fatigue Alert

To help vehicle drivers manage the evolution of their fatigue, a fa-

tigue index displays the evolution of driver’s fatigue, taking into ac-

count physiological and journey related parameters such as time of

the day and time spent on driving. The device will alert the driver

every two hours of driving. When fatigue index is less than 60, the

value is displayed in green color. Before fatigue index reaches 80,

yellow value is displayed with an alert sound. When fatigue index is

above 80, red value is displayed with 3 alert sounds and an fatigue

icon pop up to alert user. (System time needs set correctly when

user switches on driver fatigue alert function ).When switched off,

fatigue index will not be displayed on the screen.

87

18

Functions

WaveGuard

®

parking surveillance

Automatic video recording

Collision detection & emergency file

protection

Seamless loop recording

Auto exposure

Auto white balance

Date and time stamp

Auto LCD off

Driver fatigue alert and fatigue index display

EasyCapture emergency recording button

Wide angle video capturing

Advanced night view

Image Sensor

2.1 Mega-pixels CMOS

Video Resolution

Full HD(1920x1080p) @30fps

HD Premium(1280x720p)@60fps

HD Premium(1280x720p)@30fps

Display

2.7” LCD (960x240)

Aperture Range

F/#2.0

Fixed Lens

7G wide angle lens, FOV 171° (Diagonal)

File Format

MOV

PCM audio compression /H.264 video

compression

Random Access Memory

64Mx16bit (1Gbits) DDR3 SDRAM

Internal Memory

64Mb SPI Flash

Recording Media (external

memory)

Micro SD card

(at least 8GB, class 10 or higher, 64GB

recommended)

Recording Time

320min @32GB for full HD

640min @64GB for full HD

RTC

5days

Operating Temperature

-10°C ~ 65°C

Storage Temperature

-20°C ~ 70°C

Accessories

OBD cable, Bracket, Quick Guide, Sticky

Tape, Cable Clips

Interface

Micro USB 2.0, Mini HDMI port, Micro

SD Slot, Microphone, Speaker

Languages

English, Chinese

Power

12V to 5V/1A, OBD cable

Dimensions (LxWxH)

106.7 x 50.0 x 32.5mm

TechnicalSpecication

7

19

Disclaimer

8

*

The device is only suitable for the 12V power supply's vehicles.

*

To realize 7 days x 24 hours’ protection by video surveillance,

the SD card capacity must be at least 32G.

*

The device only can detect and record moving objects within a

limited range, and in the same direction with lens coverage, but

can't detect any events in reversed direction. If you need a 360°

protection of vehicle, please buy 2 devices, one is for forward

direction, and the other is for backward direction.

*

When vehicle's cabin temperature exceeds 70°C, to protect

vehicle's security, the device will be powered off automatically

and pause the protection by video surveillance.

*

Winter’s low temperature, aged or un-fully-charged vehicle

battery, will cause the device's effective video surveillance time

reduced.

*

If the windshield in front of the device’s lens becomes dirty, by

rain, snow, sand-storm or other nature/human factors, , it will

cause the device not get effective video evidences.

*

Rain, snow, swaying tree branches or busy streets/parking

lot environment, will sometimes cause the video recording

continuously, so the effective protection time will be greatly

reduced. When the engine of an auto-start-stop enabled vehicle

is restarted and leads its battery voltage lower than the voltage

protection threshold, the device could be rebooted.

*

Some windscreen films will not only interfere GPS, radar, ETC

etc, but also affect WaveGuard

®

detection range. If still not

satisfied by the protection range adjustment in the System

Setting menu, please use a better film or “open” a small window

on it for the device.

To judge the existence of the film interference, stand in front

of the vehicle and wave your hand, and the red WaveGuard

®

indicator will not flash.

1 产品简介 ....................................................................... 21

2 快速入门 ...................................................................... 22

  2.1 插入存储卡 ....................................................... 22

  2.2 车内安装 ........................................................... 22

  2.3 自动打开/关闭电源 ........................................... 24

  2.4 手动打开/关闭电源 ........................................... 24

  2.5 手动录音关闭/启动 ........................................... 25

  2.6 取出存储卡 ....................................................... 25

  2.7 关于Micro SD .................................................... 25

3 用户界面 ....................................................................... 27

4 系统设置 ....................................................................... 28

  4.1 设定日期和时间 ................................................ 28

  4.2 功能设置 ........................................................... 28

5 操作说明 ....................................................................... 30

  5.1 录制视频 ........................................................... 30

  5.2 视频回放 ........................................................... 30

  5.3 删除视频 ........................................................... 31

  5.4 锁定视频 ........................................................... 32

6 附加功能 ....................................................................... 33

6.1 WaveGuard

®

全天停车监控功能 ....................... 33

  6.2 疲劳驾驶提醒.................................................... 33

7 技术规格 ....................................................................... 34

8 免责声明 ....................................................................... 35

21

产品简介

11

1

8

10

2

9

3

7

6

5

4

1. 支架槽

2. 镜头

3. Micro SD卡槽

4. 滑动开关(ON/OFF)

5. 确认按钮(OK)

6. 上翻按钮(▲)

7. 返回/EasyCapture紧急

录像按钮( )

8. Micro USB接口

9. 状态指示灯

10. Mini HDMI接口

11.

下翻按钮/录音启动/关闭(▼)

12.麦克风

13. OBD电源线

14. WaveGuard

®

停车监控

指示灯

15.直流电转换盒

16.扬声器

注意：1.该记录仪配有OBD电源线。OBD是汽车的车载自动

诊断系统接口，可以为记录仪提供稳定的电源。

2.请参照汽车用户手册或者询问汽车经销商，确定OBD接

口的位置。

3.请不要在开车时操作记录仪！

4.为防止重要视频被覆盖，请将卡及时取出！

15

13

14

User manual

English 5

ࡩ฼ᇓ໗ 21

ADR900

Driving

Recorder

线夹 & 胶贴 x 5 支架 x 1 OBD电源线 x 1 用户手册 x 1

12

16

22

快速入门

2.1 插入存储卡

1.存储卡金属触点朝向镜头，插入记录仪的卡槽。

2.推动存储卡，直到其咔嗒一声锁定到位，然后滑动

开关至“ON”位置。

2.2 车内安装

1.撕去支架背面和镜头上塑料保护膜。

ページが読み込まれています...

Philips ADR90BLX1 ユーザーマニュアル

Philips ADR90BLX1 ユーザーマニュアル

関連論文

その他のドキュメント