Mio Link Complete User Manual

ブランド: Mio

モデル: Link

タイプ: Complete User Manual

Complete User Guide

Table of Contents

Welcome

03 Getting Started

04 Your Mio LINK

04 Activating Mio LINK

04 Wearing Your Mio LINK

Using Mio LINK

05 Getting Your Heart Rate

06 Heart Rate Zones

07 Customizing Heart Rate Zones

08 Using Mio LINK With Devices And Apps

Maintaining Your Mio LINK

10 Charging The Battery

11 Using Mio LINK In Water

11 Caring For Your Mio LINK

12 Mio LINK Specifications

Warranty And Regulations

12 Warranty & Service

14 Exclusions And Limitations Of Liability; Disclaimers

14 Copyright And Trademarks

15 Regulations And Conformity

Have any questions about your Mio LINK?

We’re ready to help!

Your complete satisfaction is our goal, so

your feedback is crucial.

If you have any thoughts, questions, or

concerns, just contact our knowledgeable

support team at:

1.877.770.1116

support@mioglobal.com

facebook.com/mioglobal

twitter.com/mioglobal

Welcome

Congratulations on your purchase of Mio LINK, the performance level, strapless, continuous heart rate

monitor that you can wear on your wrist. LINK uses ANT+™ and Bluetooth® Smart technology to

transmit your heart rate data to smartphones and other compatible devices. Download the Mio GO app

for a fully personalized, interactive workout, or take advantage of hundreds of other fitness apps.

Remember to register your Mio LINK online at mioglobal.com/register for full warranty service.

Getting Started

What’s Included

1. Mio LINK

2. USB Dongle

3. Quick Start Guide

Important Safety Information

Consult your doctor before beginning a new exercise program.

Mio LINK provides very accurate heart rate measurements. However, it is not a medical device. The LINK

and USB dongle contain strong magnets. If you use a pacemaker, defibrillator, or other implanted

electronic devices, consult your doctor before using a Mio LINK.

See Charging The Battery for important battery care and battery safety information.

Your Mio LINK

Activating Mio LINK

1. Remove Mio LINK from the packaging.

2. Fasten the LINK onto your wrist.

3. Press and hold the button to activate your LINK. The LED will light up.

4. After a few seconds, the LED light will turn off.

5. Your LINK is now activated and in standby mode.

Wearing Your Mio LINK

To accurately monitor your heart rate:

 Fasten Mio LINK snugly on your wrist. The optical sensor on the back should make good contact

with your skin.

 You should wear the LINK above, and not directly on top, of your wrist bone

 If you have a smaller wrist, wear the LINK higher on your forearm.

 If you use the LINK for biking, wear the LINK higher on your forearm, since the bending of the

wrist will affect the heart rate reading.

 If you often have cold hands or poor circulation, try exercising for a few minutes to increase

blood flow before you begin to track your heart rate.

Using Mio LINK

Getting Your Heart Rate

You can get your real-time heart rate when you put Mio LINK in Heart Rate (HR) Mode. You must be

wearing the LINK to obtain an accurate heart rate reading. The heart rate may take a few seconds to

Button

LED

Optical Sensor

USB Connector

Charging Pins

stabilize while your body is adjusting to the physical activity; we recommend activating Heart Rate Mode

during the warm up stage of your workout.

Turning On HR Mode

1. Press and hold the Button until the LED lights up. The colour of this LED is an indicator of the

battery level. (See Charging The Battery for more information).

2. Mio LINK will immediately begin searching for your HR, indicated by the pulsing LED light.

3. Hold your arm still until the LED blinks in a distinctively slower pattern. This means the LINK has

found your heart rate. The LED colour at this point is an indicator of the HR zone. For more

details, please refer to Heart Rate Zones.

If no valid heart rate signal is found within the initial 2 minutes, the LED will light up in red for 2 seconds,

then the LINK will automatically leave Heart Rate Mode and turn off. Please refer to Troubleshooting.

During your workout, if you see a red LED flashing in a steady pattern (ON for 1 second, OFF for 1

second), the LINK has lost connection to your heart rate. Please refer to Troubleshooting.

Turning Off HR Mode

Press and hold the Button until the LED lights up for 2 seconds. 1. The colour of this LED indicates the

battery level. (See Charging The Battery for more information).

Troubleshooting

 Minimize wrist movement when Mio LINK is searching for your initial heart rate.

 You may need to tighten the strap.

 Try wearing the LINK higher on your forearm.

 On colder days, activate the heart rate reading before heading outdoors.

 If you are still having trouble, try wearing the LINK on your other wrist.

Heart Rate Zones

Your target heart rate (HR) zone consists of your upper HR limit and your lower HR limit. These limits are

usually a percentage of your maximal heart rate (MHR).

If you do not know your MHR or upper and lower HR limits, you can check with your doctor, or use this

following MHR calculation method as a guidance:

   

Using Heart Rate Zone Alerts

Training Zone Mode (5-Zone)

The LED light will blink slowly to indicate your current HR zone. You can customize the upper and lower

boundaries of each HR zone through the Mio GO app. Please see Customizing Heart Rate Zones for

more details.

COLOUR

DESCRIPTION

LOWER HR LIMIT

UPPER HR LIMIT

Cyan

●

Resting

0% of MHR

< 50% of MHR

Blue

●

Warm Up / Recovery

50% of MHR

< 60% of MHR

Green

●

Fat Burn & Endurance

60% of MHR

< 70% of MHR

Yellow

●

Aerobic Fitness

70% of MHR

< 80% of MHR

Magenta

●

Anaerobic Intensive

80% of MHR

< 90% of MHR

Red

●

Peak Performance

90% of MHR

220 BPM

Note: This table is only a suggested ranger.

Zone Alert Mode (3-Zone)

Training Zone Mode is the factory default on Mio LINK. To switch to Zone Alert Mode, or to customize

the upper and lower boundaries of each HR zone, please refer to Customizing Heart Rate Zones.

In Zone Alert Mode, the LED will blink slowly to indicate whether you are below, within, or above the

target HR zone. A double LED flash indicates your heart rate is outside of the target HR zone by 10 BPM

or more.

COLOUR

DESCRIPTION

LOWER HR LIMIT

UPPER HR LIMIT

Blue

●

Below Target HR Zone

0% of MHR

< 65% of MHR

Green

●

Within Target HR Zone

65% of MHR

< 85% of MHR

Red

●

Above Target HR Zone

85% of MHR

100% of MHR

Note: This table is only a suggested ranger.

Customizing Heart Rate Zones

To achieve the full potential of training with Mio LINK, you should configure your LINK through the Mio

GO app. Mio GO allows you to:

 Switch between Training Zone Mode and Zone Alert Mode

 Customize your upper and lower limits of each HR zone

Mio GO is available for download in the Apple App Store and Google Play store.

Note: Currently, the Android version of Mio GO will be for setup only. Full features coming soon!

Configuring Your Mio LINK

1. Turn on the Heart Rate Mode of your Mio LINK.

2. Open the Mio GO app on your smartphone or tablet. If you are opening the app for the first

time, you will be asked to register and connect your LINK, as well as set up a user profile. For

instructions on pairing your LINK with Mio GO, please see Using Mio LINK With Devices And

Apps.

3. Tap the Connect icon to see all your previously connected devices.

4. Select your LINK from the list of connected devices. When your LINK has successfully connected

to Mio GO, a Setup Mio LINK button will appear.

5. Tap Setup Mio LINK to access the configuration settings of your LINK.

6. The screen will clearly indicate whether your LINK is currently in Training Zone Mode or Zone

Alert Mode.

7. Select Zone Alert Mode or Training Zone Mode.

8. Within the Zone Alert Mode settings, you can tap the Set Zone Alert Mode button to put your

LINK into Zone Alert Mode.

Within the Training Zone Mode settings, you can tap the Set Training Zone Mode button to put

your LINK into Training Zone Mode.

9. Choose to customize your lower and upper HR limits by either % Max HR or BPM.

10. Tap each zone to change the lower and upper boundaries. Tap Done to save.

11. Your LINK is now configured and ready to support your workout!

For more information or for assistance with configuring your Mio LINK, please visit

mioglobal.com/support.

Using Mio LINK With Devices And Apps

Mio LINK can be used as a stand-alone heart rate monitor with heart rate (HR) zone indicator. You can

also transmit your real-time HR data, using ANT+™ or Bluetooth® Smart technology, to any compatible

smartphones and exercise equipment computers. Connect your LINK to a compatible device to take

advantage of the wide range of fitness apps available. For a complete list of compatible devices, please

visit mioglobal.com/apps.

Compatible devices will only capture LINK’s HR data in real-time. This requires you to have the device

with you while you are tracking your heart rate.

Working With A Receiving Device

 If needed, purchase an ANT+™ dongle when you purchase your Mio LINK heart rate band.

 Once you turn on Heart Rate Mode, the LINK will be discoverable from your devices. Once the

LINK is connected to your device, it will begin transmitting your HR data through Bluetooth®

Smart and ANT+™ wireless technology simultaneously.

 Wear the receiving device on your arm, in your front pocket, or in front of you on a belt or bike

handlebar. Do not position the device behind you (e.g. in a back pocket or backpack).

 Heart rate calculation of the LINK is not based on instant R-R interval, and will not work for apps

that require heart rate variability (HRV) data.

Tip: The first time you use your LINK with a receiving device or app, you must pair the LINK to the device

or app. Pairing can prevent signal interference when other sensors and devices are in the area.

Tips For Pairing

 Mio LINK must be in Heart Rate Mode.

 Position the receiving device within 3 meters (9 feet) of your LINK.

 Stay 10 meters (30 feet) away from other ANT+™ or Bluetooth® sensors and devices.

Pairing With Apps

1. If you want to pair through ANT+™, plug in the ANT+™ dongle.

2. If you want to pair through Bluetooth® Smart technology, turn on the Bluetooth® function of

your device.

3. Turn on Heart Rate Mode on your Mio LINK.

4. Open the app that you would like to pair with. Instructions vary for each app, but typically, you

can add or scan for a heart rate sensor within the app’s settings.

5. Repeat the above pairing process for each app. After pairing is complete, your LINK will

automatically be recognized each time you use the app.

Note: To pair with an Android app through Bluetooth® Smart, all of the following requirements must

be met:

o Your device must be running an Android 4.3 or newer operating system.

o Your device must be Bluetooth® Smart Ready.

o The app must support Bluetooth® Smart technology.

Pairing With Receiving Devices Such As Bike Computers

Instructions vary for each device. Follow the instructions for receiving heart rate data from a chest strap;

your device will register the Mio LINK heart rate band.

Maintaining Your Mio LINK

Charging The Battery

Mio LINK contains a rechargeable lithium polymer battery. Follow these instructions and guidelines to

maintain the battery lifespan.

If you do not follow these guidelines, the battery life could be shortened and there is the risk of damage

to your LINK, risk of fire, risk of electrolyte leaks and chemical burns, and risk of injury.

Battery Status

There are two ways to see the battery level of your Mio LINK:

1. The LED light will light up and indicate the battery level every time you turn on or turn off Heart

Rate Mode.

COLOUR

BATTERY POWER

Cyan

●

Battery is charged

Yellow

●

Battery level is below 30%

Red (flash twice)

●

Battery level is low and unable to provide heart rate measurement

2. On the display screen of the Mio GO app.

Note: Your LINK must be connected to Mio GO to use this option

Battery Life

Every full charge of Mio LINK will provide 6 to 8 hours of battery life in Heart Rate Mode.

Charging Your Mio LINK

1. Make sure the 4 charging pins on the back of the Mio LINK are dry. If not, dry them with a towel.

2. Plug the USB connector of the USB dongle into the USB port of your computer.

3. Attach the 4 charging pins on the back of the LINK to the 4 charging pins on the USB dongle. The

magnets in the charging pins will help the two pieces lock into place.

The LED light will fade in and out slowly in a cyan color ● to indicate that the battery is charging. When

the battery is fully charged, the LED light will turn off.

Battery Care Guidelines

 Recharge the battery at least once every 6 months.

 Do not expose Mio LINK to high temperatures.

 Use your LINK in the temperature range of 5°C to 45°C (41°F to 113°F).

 Store the LINK in the temperature range of 0°C to 25°C (32°F to 77°F).

 Do not disassemble, puncture, or incinerate the LINK strap or battery.

 If the band casing breaks and the battery is exposed, keep the battery away from children.

Battery Replacement

 The battery lifetime is approximately 300 charge cycles. If the battery is charged on a weekly

basis, the battery should last for 5 years.

 When the battery charge length is noticeably shorter than before, visit mioglobal.com/support

to find out how to replace the battery.

 Contact your local recycling authority for information about disposing of the band or battery.

Using Your Mio LINK In Water

 Mio LINK is water-resistant and can be worn while swimming.

 Important: Do not press the Button under water.

 The accuracy of the heart rate monitor might be reduced in cold water or if you are using large

arm movements.

 Do not wear your LINK while diving.

 RF transmission does not work under water.

 After swimming, remove the LINK strap from the main unit. Rinse both with tap water and dry

with a soft cloth.

Caring For Your Mio LINK

Cleaning Your Mio LINK

 Wipe the optical sensor area and charging pins with a damp cloth as needed. Use mild soap to

remove oil or dirt. If you use Mio LINK regularly, weekly cleaning is recommended.

 Avoid scratching the optical sensor area to protect your LINK from damage.

 Do not expose the LINK to strong chemicals such as gasoline, cleaning solvents, acetone, alcohol,

or insect repellents. Chemicals can damage the seal, case, and finish.

 After swimming, remove the strap from the main unit. Rinse both with tap water and dry with a

soft cloth.

Other Care Tips

 Do not attempt to disassemble or service your Mio LINK.

 Protect your LINK from impact shocks, extreme heat, and extended exposure to direct sunlight.

 The LINK is water-resistant only if the buttons and casing remain intact.

Mio LINK Specifications

Maximum Readable Heart Rate: 220 BPM

Minimum Readable Heart Rate: 30 BPM

Operating Temp: 5°C to 45°C (41°F to 113°F)

Case: ABS

Caseback: PC+GF

Caseback Charging Pins: SUS316

Strap: Silicon

Water Resistance: 30M

Battery: 60mAh Lithium Polymer

Expected Battery Life: Up to 5 Years

Magnets: Neodymium – iron – boron (NdFeB)

Radio Frequency/Protocol: 2.4 GHz ANT+™ and Bluetooth® Smart Wireless Technology

Warranty And Regulations

Warranty & Service

Be sure to visit our Product Support pages to find online help, FAQs, Videos, and Manuals for your

product: mioglobal.com/support

Mio Limited Warranty Information

This product is warranted to the original purchaser to be free from defects of quality, materials or

workmanship at the time of delivery for the Limited Warranty Period (see below), During the Limited

Warranty Period, Physical Enterprises Inc. will, at its sole discretion, remedy such defects free of charge

either by a) repairing, or b) replacing, or c) refunding the original purchase price (excluding taxes,

shipping, handling, duties, and similar amounts), subject to the terms and conditions of this Limited

Warranty. Processing of all warranty claims will be handled by the distributor of the product for the

geographic area where the original purchase was made. To obtain warranty service, contact the

store/dealer where the product was purchased to make a warranty claim.

Warranty Period

The “Limited Warranty Period” starts on the date of purchase and lasts for one year, ending on the first

anniversary of the date of purchase. Your store/dealer (or its importer or distributor) may have offered

you a longer warranty period as part of the sale; Physical Enterprises Inc. is not responsible for such

longer warranty period so please contact your store/dealer for more information. The Limited Warranty

Period will automatically expire without notice, and this Limited Warranty is not enforceable, if (as

determined at the sole discretion of Physical Enterprises Inc.):

1. the product has been opened or otherwise tampered with (except where permitted by the

relevant documentation, such as to properly replace batteries as instructed);

2. the product has been serviced by a person other than an authorized Mio service centre or

Physical Enterprises Inc. (please contact Physical Enterprises Inc. to obtain a list of

authorized service centres);

3. the serial number has been removed, altered or made illegible in any way; or

4. the product was not purchased from an authorized reseller of Physical Enterprises Inc.

(please contact Physical Enterprises Inc. to obtain a list of authorized resellers).

Please refer to mioglobal.com/support for country-specific warranty information.

Exclusions And Limitations

This Limited Warranty does not cover, and customers will not be entitled to any claim under this Limited

Warranty or otherwise for:

1. problems arising from normal wear and tear;

2. problems arising from abuse or rough, careless, or improper handling (and without limiting

the foregoing, damage resulting from bending or dropping the product will be deemed the

result of abuse or improper use);

3. problems arising from misuse contrary to intended or recommended use;

4. problems arising from alteration of the Mio product, such as moisture or water damage

sufficient to affect the proper function of the product, and damage to the product case or

visible cracking of the face;

5. problems arising from the use of the Mio product with any product, accessory, software

and/or service not manufactured or supplied by Physical Enterprises Inc.; or

6. replaceable batteries, or user manuals or any third-party items;

in each case as determined at the sole discretion of Physical Enterprises Inc.

EXCLUSIONS AND LIMITATIONS OF LIABILITY; DISCLAIMERS

THIS LIMITED WARRANTY IS ONLY VALID AND ENFORCEABLE IN THE COUNTRY OF PURCHASE. TO THE

MAXIMUM EXTENT PERMITTED BY APPLICABLE, MANDATORY LAWS:

1. THIS LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL

OTHER WARRANTIES, REPRESENTATIONS, GUARANTEES OR CONDITIONS, WHETHER

EXPRESSED OR IMPLIED;

2. NEITHER THIS LIMITED WARRANTY, NOR ANY OTHER WARRANTY, GUARANTEE,

REPRESENTATION OR CONDITION, INCLUDING ANY IMPLIED WARRANTY AND CONDITION

(WHETHER FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR

OTHERWISE), WILL EXTEND BEYOND THE LIMITED WARRANTY PERIOD;

3. PHYSICAL ENTERPRISES INC., OR ANY OF ITS AFFILIATES OR THEIR RESPECTIVE EMPLOYEES,

OFFICERS, DIRECTORS, REPRESENTATIVES AND AGENTS (COLLECTIVELY, THE “PHYSICAL

ENTITIES”), SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE, INDIRECT OR

CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED

BENEFITS, LOSS OF DATA, LOSS OF USE, COST OF CAPITAL, COST OF ANY SUBSTITUTE

EQUIPMENT OR FACILITIES, CLAIMS OF THIRD PARTIES, DAMAGE TO PROPERTY RESULTING

FROM THE PURCHASE OR USE OF THE ITEM OR ARISING FROM BREACH OF THE WARRANTY,

BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY LEGAL OR EQUITABLE THEORY,

EVEN IF PHYSICAL ENTERPRISES INC. KNEW OF THE LIKELIHOOD OF SUCH DAMAGES;

4. WITHOUT LIMITING THE FOREGOING, THE PHYSICAL ENTITIES DO NOT WARRANT THAT THE

OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT THE

PRODUCT WILL WORK WITH ANY HARDWARE OR SOFTWARE PROVIDED BY A THIRD PARTY,

AND EXPRESSLY DISCLAIM ANY DAMAGES RESULTING FROM INACCURACY OR

MATHEMATICAL INACCURACY OF THE PRODUCT OR THE LOSS OF STORED DATA; AND

5. THE PHYSICAL ENTITIES SHALL NOT BE LIABLE FOR DELAY IN RENDERING WARRANTY

SERVICE.

SOME PROVINCES, STATES OR OTHER JURISDICTIONS DO NOT ALLOW LIMITATIONS ON THE LENGTH OF

IMPLIED WARRANTIES OR CONDITIONS, OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

CERTAIN TYPES OF DAMAGES, OR THE EXCLUSION OR LIMITATION OF LIABILITY FOR DEATH OR

PERSONAL INJURY CAUSED BY THAT PARTY’S NEGLIGENCE. IF THAT IS TRUE OF THE ORIGINAL

PURCHASER’S PROVINCE, STATE OR JURISDICTION, THE ABOVE LIMITATIONS OR EXCLUSIONS SHALL

NOT APPLY EXCEPT TO THE MAXIMUM EXTENT PERMITTED BY SUCH APPLICABLE LAW. YOU HAVE

SPECIFIC RIGHTS UNDER THIS LIMITED WARRANTY. HOWEVER, YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM JURISDICTION TO JURISDICTION AND NOTHING IN THIS LIMITED WARRANTY WILL

APPLY TO REDUCE OR ELIMINATE ANY OF YOUR MANDATORY, STATUTORY RIGHTS.

Contacting Physical Enterprises

For all matters related to this Limited Warranty, please contact Physical Enterprises Inc.:

By Telephone:

US/Canada: 1-877-770-1116

Mon–Fri, 6 AM – 4 PM (Pacific Time)

Global Telephone Numbers (Distributors, Importers, Dealers, etc.):

UK: 0-808-189-0088

France: 0805-080238

Germany: +49-32221092412

Italy: +39-199241485

Netherlands: +31-858880285

Spain: +34-518880398

Australia: 1-800-921-563

By Email: support@mioglobal.com

Enterprises Inc. registered in the U.S. and other countries.

MIO® is a registered trademark of Physical Enterprises Inc.

iPhone® is a registered trademark of Apple Inc.

Android™ is a trademark of Google Inc.

ANT+™ is a trademark of Dynastream Innovations Inc.

Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Physical Enterprises Inc. or Mio is under license.

Other trademarks and trade names are those of their respective owners.

Regulations And Conformity

The LINK Regulatory Sheet is available for download at mioglobal.com/support.

EU RESIDENTS: Do not dispose of this product as unsorted municipal waste. It is your responsibility to

return this product to your local recycling service.

EU-DECLARATION OF CONFORMITY Physical Enterprises Inc. declares this heart rate band (Mio LINK) in

compliance with EMC directive 2004/108/EC. A copy of the Declaration of Conformity is available on

request from our MIO Watch Service line.

If there are electrostatic disturbances in the environment, the product may malfunction or display an

error. In this case, reset the product or relocate to an area without such disturbances.

Model # 56P

Made in China

MODEL NUMBERS

56P

Regulatory Information - Canada

FRANÇAIS

Mio n’a approue aucune modiﬁcation apportee

a l’appareil par l’utilisateur, quelle qu’en soit la

nature. Tout changement ou toute modiﬁ cation

peuvent annuler le droit d’utilisation de l’appareil

par l’utilisateur.

Industrie Canada (IC)

Le présent appareil est conforme aux CNR-210

d’Industrie Canada applicables aux appareils

radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes : (1)

l’appareil ne doit pas produire de brouillage,

et (2) l’utilisateur de l’appareil doit accepter

tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le

fonctionnement.

CAN ICES-3 (B)/NMB-3(B).

ENGLISH

Mio has not approved any changes or

modiﬁcations to this device by the user. Any

change or modiﬁcation could void the user’s

authority to operate the equipment.

Industry Canada (IC)

This device complies with Industry Canada

License-exempt RSS-210. Operation is subject

to the following two conditions: (1) this device

may not cause interference, and (2) this

device must accept any interference, including

interference that may cause undesired operation

of the device.

CAN ICES-3 (B)/NMB-3(B).

MODEL NUMBERS

56P

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equip-

ment and receiver.

3. Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

This product emits radio frequency energy,

but the radiated output power of this device is

far below the FCC radio frequency exposure

limits. This equipment complies with FCC RF

radiation exposure limits forth for an uncontrolled

environment. Nevertheless, the device should

be used in such a manner that the potential for

human contact with the antenna during normal

operation is minimized.

ESPAÑOL

Mio no ha aprobado que el usuario haga ningún

cambio o modiﬁcación a este dispositivo.

Cualquier cambio o modiﬁcación podría invalidar

la facultad del usuario para operar el equipo.

Regulatory Information - USA

ENGLISH

Mio has not approved any changes or

modiﬁcations to this device by the user. Any

change or modiﬁcation could void the user’s

authority to operate the equipment.

FCC Regulatory Information

This device complies with part 15 of the FCC

rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device must

accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful

interference to radio or television reception,

which can be determined by turning the

Información normativa de la FCC

Este dispositivo cumple con la parte 15 de

las normas de la FCC. La operación está

sujeta a las siguientes dos condiciones: (1)

Este dispositivo no puede causar interferencia

perjudicial, y (2) este dispositivo debe aceptar

cualquier interferencia recibida, incluyendo

aquellas interferencias que puedan provocar un

funcionamiento no deseado.

Nota: Las pruebas realizadas con este equipo

ponen de maniﬁesto su adecuación a los límites

estipulados para un dispositivo digital de clase

B, según la Parte 15 de las Normas de la FCC.

Estos límites se han establecido para ofrecer

un grado de protección razonable contra

interferencias perjudiciales en instalaciones

residenciales. Este equipo genera, utiliza y puede

emitir energía de radiofrecuencia y, si no se

instala y se utiliza según las instrucciones que

le acompañan, puede ocasionar interferencias

perjudiciales en las comunicaciones de

radio Sin embargo, no hay garantía de que

las interferencias no ocurrirán en ciertas

instalaciones.

Si este equipo produce interferencias

perjudiciales en la recepción de radio o

televisión, lo cual se puede detectar activando

y desactivando el equipo, el usuario puede

tratar de corregirlas mediante algunas de las

siguientes medidas:

1. Reorientar o cambiar la ubicación de la

antena receptora.

2. Aumentando la separación entre el equipo

y el receptor.

3. Conectando el equipo a un tomacorriente de

un circuito diferente al que está conectado

el receptor.

4. Consultando al proveedor o a un técnico

experimentado de radio/TV, para obtener

ayuda.

Este producto emite energía de radiofrecuencia,

pero la salida de potencia radiada de este

dispositivo se encuentra muy por debajo de

los límites de exposición a la radiofrecuencia

de la FCC. Este equipo cumple con los límites

de exposición a la radiación de RF de la FCC

establecidos para un entorno no controlado. Sin

embargo, el dispositivo se debe usar de forma

que se minimice la posibilidad de contacto del

humano con la antena durante el funcionamiento

normal.

Regulatory Information - USA

WARRANTY & REGULATIONS

WARRANTY

ENGLISH .......................................................................................................4

FRANÇAIS ....................................................................................................7

DEUTSCH ...................................................................................................10

NEDERLANDS.............................................................................................13

ESPAÑOL ....................................................................................................16

ITALIANO .................................................................................................... 19

PORTUGUÊS .............................................................................................. 22

SVENSKA ...................................................................................................25

TÜRKÇE ......................................................................................................28

中文(繁體) ...............................................................................................31

中文(简体) .............................................................................................. 34

日本語 ......................................................................................................37

한국의 ....................................................................................................... 40

REGULATIONS

EUROPEAN UNION ..................................................................................... 43

USA ........................................................................................................... 46

CANADA .................................................................................................... 48

AUSTRALIA & NEW ZEALAND ....................................................................49

TAIWAN ..................................................................................................... 50

ページが読み込まれています...

Mio Link Complete User Manual

ブランド: Mio

モデル: Link

タイプ: Complete User Manual

PDFをダウンロードします

報告

他の言語で

svenska: Mio Link
italiano: Mio Link
español: Mio Link
Deutsch: Mio Link
français: Mio Link
português: Mio Link
Türkçe: Mio Link
English: Mio Link
Nederlands: Mio Link

Mio Link Complete User Manual

Mio Link Complete User Manual

他の言語で

関連論文

その他のドキュメント