Launch App Store on your Apple or Android® smartphone/tablet
Search for: “Digi-Pas Smart Levels” App & Install
Download App
1
STEP
Loosen screw by turning anti-clockwise direction using Philips screwdriver
Pull out battery cap
Insert two (2) 1.5V AA batteries follow polarity direction as indicated
above.
Caution:
Please ensure batteries are inserted in correct polarity direction for device to work.
Install Battery
2
STEP
Press & hold Power button to power on the digital level. The blinking
“BT” indicate the device is waiting to be paired & initialized*.
On your smartphone or tablet, launch Digi-Pas app
Follow steps displayed on your smartphone or tablet
Pairing
3
STEP
First, you are required to download Digi-Pas® Smart
Levels App from Google Play Store or Apple App
Store to your smartphone/ tablet. Then, use Blue-
tooth to link with Digital Level to initialize the level-
ling instrument.
Getting Started
DIGITAL LEVEL
QUICK START GUIDE
Pat. No.: US Pat. 9,459,121 B2
Limitation of Liability
In no event shall DIGIPAS TECHNOLOGIES INC., (hereinafter, “the Company”) be
liable to you or any third party for any indirect, special, incidental, exemplary or
consequential damages of any kind resulting from any breach of warranty or
from the performance or use of the product. This includes without limitation:
property damage, loss of value of the product or any third party products that
are used with the product, or loss of use of the product or any third party
products that are used with the product, even if the Company has been advised
of the possibility of such loss or damages. The Company’s total cumulative
liability arising from or related to the product, whether in contract, tort
(including negligence) or otherwise, shall not exceed the amount actually paid
by you for the product. Some states and/or jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. If any limitation of liability shall
be deemed invalid by any applicable law, then the limitations of liability set forth
above shall apply to the maximum extent permitted under applicable law.
Warranty
Digi-Pas® Digital level is warranted to the original purchaser to be free from defects
in workmanship and material. DIGIPAS TECHNOLOGIES INC will, at its option, repair
or replace any detective part which may malfunction under normal and proper use
within a warranty period of 1 (one) year from the date of shipment. This one year
warranty clause is NOT applicable to European Union (EU) member states. Purchases
made in EU member states will be covered by the existing consumer laws across the
European Union, which provide statutory warranty rights in addition to the
coverage of one year warranty period. The foregoing warranty shall not apply to
defects resulting from misuse, abuse or transfer by the Buyer, Buyer-supplied
DIGIPAS TECHNOLOGIES INC. does not
uninterrupted or error free.
The exclusive remedy under any and all warrants and guarantees, expressed herein,
and we shall not be liable for damages from loss or delay of equipments uses,
consequential, or incidental damage. No other warranty is expressed or implied.
DIGIPAS TECHNOLOGIES INC.
pairing only.
FCC ID: 2AFP6-DGP21C
MODEL: DWL
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc
-
tions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
encouraged to try to correct the interference by one or more of the following
measures:
responsible for compliance to this equipment would void the users' authority to
operate this device.
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The radiated output power of this device meets the limits of FCC radio frequency
exposure limits.
1
:
2
3
Pat. No.: US Pat. 9,459,121 B2
FCC ID: 2AFP6-DGP21C
MODEL: DWL
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc
-
tions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
encouraged to try to correct the interference by one or more of the following
measures:
responsible for compliance to this equipment would void the users' authority to
operate this device.
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The radiated output power of this device meets the limits of FCC radio frequency
exposure limits.
-
1
-
2
