Berkly Nightstand
Assembly Instruction
Important Information:
Before assembly, read these instructions. Make sure
Made in Vietnam
all preassembled parts are tight. Store this instruction
manual for future reference.
Website: www.sorellefurniture.com
Fixed Shelf (1 pc)
Top panel Side panels ( 2 pcs )
B
C D
Bottom Panel ( 1 pc )
Assembly Parts
Page 2
Assembly Hardware
(d)
Allen Key (1PC)
(e). Flat Washer ( 12 pcs)
(f). Lock Washer ( 12 pcs)
(g). Wood dowels ( 4 pcs)
1/4” * 2-1/2” Allen Bolt (4 pcs)( a )
1/4” * 2” Allen Bolt (4 pcs)( b )
1/4” * 1-1/2” Allen Bolt (4 pcs)( c )
(h). Metal Pin ( 8 pcs)
Attach Bottom panel (C) and fixed shelf( D) to side panels (B), using eight (8) Metal Pins (h) .See Figure 1.
2
1
Figure 1.
Figure 2.
Page 3
Nightstand Assembly
(B)
(B)
(B)
(C)
(C)
(D)
(D)
(B)
(h)
(h)
(h)
(a)(f) (e)
(d)
(h)
(h)
(h)
Attach Bottom panel (C) and fixed shelf (D) to side panels (B), by using Four (4)Allen head Bolt(a)&Four (4) Washer (f)& Four(4)
Spring Washer (e).Use Allen key to tighten bolts See Figure 2.
Attach Top panel (A) , by using Four (4)Allen head Bolt(c)&Four (4) Washer (f)& Four(4)
Spring Washer (e), using Four (4) wood dowels . Use Allen key to tighten bolts See Figure 3.
Attach Top panel (A) , by using Four (4)Allen head Bolt(b)&Four (4) Washer (f)& Four(4)
Spring Washer (e), Use Allen key to tighten bolts See Figure 4.
Figure 3.
Figure 4.
(A)
(g)
(g)
(c)
(d)
(f)
(e)
(b)(f)(e)
(d)
4
3
Page 4
Nightstand Assembly
/