Creality K1 ユーザーガイド

タイプ
ユーザーガイド
Creality 3D K1 machine uses cura slicing software.
1. Download Slicing Software
Need to download cura5 slicing software and install it yourself:
Download link: GitHub - Ultimaker/Cura: 3D printer / slicing GUI built
on top of the Uranium framework
2. Add printer
1. Entrance
2. Select K1 similar machine :Ender-3 S1
3. Renamed to Creality K1 or other name。
4. Just configure it to the K1 machine size, don't forget to start
and end gcode synchronously
Start G-code(To keep newlines):
M140 S0
M104 S0
START_PRINT EXTRUDER_TEMP=220 BED_TEMP=55
End G-code(To keep newlines):
END_PRINT
3. Import gcode configuration file.
1. In the operation drop-down box on the right sidebar, click Manage
Configuration Files:
2. Click the import button to upload the configuration file of the
K1 machine we prepared in advance (tutorial attachment):
After the import is successful, we find the configuration file, select it,
and click the fold button on the right:
3. Finally click to activate the configuration file to take effect:
K1 series machine configuration file:
cura_k1_pla.curaprofile
4. Save to desktop after slicing
After all configuration operations are completed, we import the model,
select the imported configuration file, and click the slice button:
1. After slicing is successful, we save the gcode file to the desktop/disk
space
© 2014-2023 Shenzhen Chuangxiang 3D Technology Co., Ltd. All rights reserved.
Feedback email:[email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Creality K1 ユーザーガイド

タイプ
ユーザーガイド

他の言語で