2. Function Setting
1> Rotate " K1 " to choose the cooking function you require. The related symbol will illuminated .
2> Rotate " K2 " to adjust the temperature.
Press " " to confirm the start of cooking.
the default temperature will display on the LED.
NOTE:
0--0:30min:
step
1
minute
0:30--9:00hour:
step
5
minutes
O
Rotate " K1 " to adjust the cooking time when cooking begins. Then press " " to confirm.
If " " not pressed within 3 seconds, the oven will revert back to the previous time to
continue cooking.
Rotate" K2 " to adjust the temperature when cooking begins. The related indicator will be illuminated.
Then press" " to start cooking. If " " not pressed in 3seconds, the oven will revert back to the
previous temperature to continue cooking.
3. Lamp Setting
OPERATION INSTRUCTIONS
1. Clock Setting
After connecting the unit to the power, the symbols " 0:00 " will be visible on the display.
1> Press " ", the hour figures will flash.
2> Rotate " K2 " to adjust the hour figures, (time should be within 0--23).
3>
Press " ", the minutes will flash.
4> Rotate " K2 " to adjust the minutes setting, (time should be within 0--59).
5> Press " " to finish the clock settings. " : " will flash, and the time will be illuminated.
Note: The clock is 24 hours. After power on, if not set, the clock will show " 0:00 ".
1> Rotate " K1 " to select the relevant function, then the corresponding icon will be on.
2> Press " " to start, " 0:00 " and lamp " " will light up, " : " will flash.
4. Inquiring Function
In the following states, you can use inquiring function, after 3 seconds return to the current state.
1> During working state, if the clock was set, press " " to see the current time;
if the reminder function was set, press "
" to see the time of reminder.
2> In reminding state, if the clock was set, press " " to see the current time.
3> In clock display state, if the preset function was set, press " " to see the End cooking time.
"beeping" sound.
1>
2> The step quantities for the adjustment time of the knobs are as follow:
The step quantities for the adjustment of temperature is 5 C.
3>
4>
5>
6> If step 2 is ignored, Press " " to confirm the start of cooking and the default time is 9 hours,
7> The temperature will start blinking until it reach the temperature selected followed by a