English
1 Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Warning
• Do not touch the sharp blades when
the appliance is plugged in. If the blades
get stuck, unplug the appliance before
you remove the ingredients. Be careful
when handling the sharp cutting blades,
emptying the jar and during cleaning.
• Switch off and unplug the appliance from
the power supply before:
• Removing it from the motor unit,
changing accessories or approaching
parts that move in use.
• Assembling, disassembling or cleaning it.
• It is left unattended.
• Do not immerse the appliance in water or
any other liquid.
• Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
• Do not use the appliance if the plug, the
mains cord or the rotating sieve or the
protecting cover are damaged or has visible
cracks. If the mains cord is damaged, you
must have it replaced by Philips, a service
centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
• Make sure the blade unit is securely
fastened and the lid is properly assembled
to the blender jar before you use the
appliance.
• This appliance shall not be used by
children. Keep the appliance and its cord
out of reach of children.
• This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and if they
understand the hazards involved.
• Children should be supervised to ensure
that they do not play with the appliance.
424000202631
HR2062
EN Important information leaet
ZH-S
重要信息手册
• Be careful if hot liquid is poured into the
food processor or blender as it can be
ejected out of the appliance due to a
sudden steaming.
• Never assemble or disassemble the blender
jar to the motor base while the power is on.
• This appliance is intended for household
use only.
• Read the cleaning procedure from "User
Manual" before use.
• In order to avoid a hazard due to
inadvertent resetting of the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
Caution
• Never use any accessories or parts from
other manufacturers or that Philips does
not specifically recommend. If you use
such accessories or parts, your guarantee
becomes invalid.
• Do not exceed the maximum indication on
the blender jar.
• Do not exceed the maximum quantities and
processing times indicated in the relevant
table.
• If food sticks to the wall of the blender jar,
switch off the appliance and unplug it. Then
use a spatula to remove the food from the
wall.
• Never fill the blender jar with ingredients
hotter than 80ºC.
• The appliance can only be switched on if
the blender jar or the beaker is assembled
on the motor unit correctly.
• Noise level: Lc = 86 dB(A).
Specifications are subject to change without notice
© 2016 Koninklijke Philips N.V.
All rights reserved.
发布日期：
2016-04-26
保留备用
保留所有权利
Register your product and get support at
请登录以下网址并得到相应的帮助
www.philips.com/welcome
Blender
Warning
• Never reach into the blender jar with your
fingers or an object while the appliance is
running.
• If the blade unit gets stuck, unplug
the appliance before you remove the
ingredients that block the blades.
Caution
• To prevent spillage, do not put more than
1 litres of liquid in the blender jar, especially
when you process at a high speed. Do not
put more than 750 ml in the blender jar
when you process hot liquids or ingredients
that tend to foam.
• Do not let the appliance run for more than
2 minutes at a time. Let the appliance cool
down to room temperature before you
continue processing.
• Always make sure the lid is properly closed/
assembled on the jar and the measuring
cup is inserted properly in the lid before
you switch on the appliance.
Built-in safety lock
This feature ensures that you can only switch on the appliance if the blender
jar is assembled on the motor unit properly. If the blender jar is correctly
assembled, the built-in safety lock will be unlocked.
Safety Feature
This blender is fitted with a safety feature which safeguards against excessive
loads. In case of overloading, the blender automatically activates the
protection and operation will stop. If this occurs, set the rotary knob to OFF,
unplug the appliance and allow it to cool down for 15 minutes. Remove the
ingredients and clear up the blender jar before starting operation.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Recycling
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a
product, it means the product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical and
electronic products. The correct disposal of your old product helps prevent
potentially negative consequences on the environment and human health.
2 Guarantee and service
If you need service or information or if you have a problem, please visit the
Philips website at www.philips.com or contact the Philips Consumer Care
Centre in your country (you find its phone number in the worldwide guarantee
leaflet). If there is no Consumer Care Centre in your country, go to your local
Philips dealer.
简体中文
1
重要事项
使用本产品之前，请仔细阅读本使用说明书，并妥善保管
以备日后参考。
警告
• 产品通电时切勿触摸锋利的刀片。如果刀片被
卡住，请先拔下电源插头再清除原料。拿取锋
利的切割刀片、清空搅拌杯和清洁时要非常
小心。
• 执行以下操作之前请关闭产品并拔出电源
插头：
• 将其从底座中取下、更换附件或接触在使用
时会活动的部件。
• 安装、拆卸或清洁。
• 产品处于无人看管状态。
• 不要将本产品浸入水中或任何其它液体中。
• 在将产品连接电源之前，请先检查产品所标电
压与当地的供电电压是否相符。
• 如果插头、电源线、旋转滤网或保护盖已损
坏，则不要使用产品。如果电源线损坏，为了
避免危险，必须由飞利浦、飞利浦特约维修中
心或有同等维修资格的专业人员来进行更换。
• 使用产品之前，确保刀片组件已牢牢固定在搅
拌杯上且杯盖已盖好。
• 儿童不得使用本产品。应将产品及其线缆置于
儿童触及不到的地方。
• 本产品适合由肢体不健全、感觉或精神上有障
碍或缺乏相关经验和知识的人士使用，但前提
是有人对他们使用本产品进行监督或指导，以
确保他们安全使用，并且让他们明白相关的
危害。
• 应照看好儿童，避免他们玩耍本产品。
• 向食品加工机或搅拌机中倒入高温液体时要小
心操作，突如其来的热气可能会导致液体
喷溅。
• 切勿在通电时在马达底座上拆装搅拌杯。
• 本产品仅限于家用。
• 使用前，请阅读“用户手册”中的清洁过程。
• 为避免因不慎重置过热保护装置而发生危险，
切勿通过外部切换设备（例如定时器）为本产
品供电，也不要连接到具有定期开关切换功能
的电路。
警告
• 切勿使用由其它制造商生产的，或未经飞利浦
特别推荐的任何附件或部件。如果使用此类附
件或部件，您的保修将失效。
• 不要超出搅拌杯上的最大刻度。
• 不要超出相关表中所示的最大份量和加工
时间。
• 如果食物粘在搅拌杯杯壁上，请关闭产品并拔
下电源插头。然后使用刮铲去除杯壁上的
食物。
• 切勿将温度超过 80ºC 的原料装入搅拌杯。
• 切勿在通电时在马达底座上拆装搅拌杯。
• 噪音强度：Lc = 86 dB(A)。
搅拌机
警告
• 在产品运转时，切勿将手指或其它物体伸入搅
拌杯中。
• 如果刀片组件被卡住，请先拔下电源插头，然
后清除堵塞刀片的原料。
警告
• 为避免溅出，请不要在搅拌杯中装入超过
1 升液
体，尤其是以高速加工时。在加工热液体或容易
起泡的原料时，请不要装入超过
750 毫升。
• 不要让产品一次运转 2 分钟以上。让产品冷却
至室温，才能继续进行加工。
• 在打开产品电源之前，应始终确保杯盖已正确
关闭/安装在搅拌杯上，量杯也正确插入盖
子中。
内置安全锁
此功能可确保只有将搅拌杯正确安装在马达装置上，才
可以启动产品。正确组装搅拌杯，内置安全锁才会解锁。
安全功能
本搅拌机配备了一项安全功能，可以防范过载。如果发生
过载，搅拌机将自动激活保护并停止工作。如果出现这种
情况，请将转动式旋钮调至
OFF
（关），拔掉产品插头
并使其冷却
15
分钟。在开始操作前，请取出原料并清洁
搅拌杯。
电磁场
(EMF)
本飞利浦产品符合所有有关暴露于电磁场的适用标准和
法规。
回收
本产品是采用优质的材料和元件设计和制造的，可
以回收利用。
如果产品上贴有带叉的轮式垃圾桶符号，则表示此
产品符合欧盟指令
2002/96/EC
：
请不要将该产品与其它生活垃圾一同弃置。请自行了解当
地关于分类收集电子和电气产品的规定。正确弃置旧产品
有助于避免对环境和人类健康造成潜在的负面影响。
2
保修与服务
如果您需要服务或信息，或者有任何疑问，请访问飞利浦
网站：
www.philips.com
。您也可与您所在国家
/
地区的
飞利浦客户服务中心联系（可从全球保修卡中找到其电话
号码）。如果您所在的国家
/
地区没有飞利浦客户服务中
心，请向当地的飞利浦经销商求助。
-
1
-
2
