SICK BA WTB11-2 WTF11-2 取扱説明書

タイプ
取扱説明書
ENGLISH
Photoelectric Reflex Sensor
with visible redlight
Operating Instructions
Safety notes
> Not a safety component in accordance with EU Machinery Directive.
> Read the operating instructions before commissioning.
> Connection, mounting, and setting is only to be performed by trained
specialists.
> When commissioning, protect the device from moisture and
con
tamination.
Correct use
The photoelectric sensors WTB11-2 and WTF11-2 are used for detection
of optical, noncontact detection of objects.
Starting operation
1
WTB11-2
Maintain direction in which object moves relative to sensor.
Set sensitivity to „max.“. Position object. Position light spot on
object. Yellow LED indicator should light up.
Remove object, yellow LED indicator does not light up any longer
(no inuence from background). Adjustment is completed.
If yellow LED indicator light up anyhow (inuence from background
is too strong), reduce sensitivity until the yellow LED indicator goes
out, position object again.
If yellow LED indicator lights up, the adjustment is completed, if not,
check application conditions such as scanning distance, size and
reectance of object to be detected as well as the reectance of the
background and compare it with characteristic in diagram.
2 WTF11-2
Align light spot on the background (e. g. conveyor belt). Background
is detected reliably when yellow LED lights. If it does not , turn scan-
ning distance adjuster to MIN, until it lights.
Position object in light beam. Maintain direction in which object
moves relative to sensor.
Object is detected correctly when yellow LED switches o. If yellow
LED lights turn the scanning adjuster in direction of MAX, until it
switches o.
Remove the object; yellow LED must light. If it does not light, realign
the proximity switch, clean it and / or check application conditions
and repeat the alignment procedure.
Maintenance
SICK light barriers are maintenance-free. We recommend doing
the following regularly:
- Clean the external lens surfaces.
- Check the screw connections and plug-in connections.
No modications may be made to devices.
DEUTSCH
Reflexions-Lichtschranke
mit sichtbarem Rotlicht (Laser)
Betriebsanleitung
Sicherheitshinweise
> Kein Sicherheitsbauteil gemäß EU-Maschinenrichtlinie.
> Vor der Inbetriebnahme die Betriebsanleitung lesen.
> Anschluss, Montage und Einstellung nur durch Fachpersonal.
> Gerät bei Inbetriebnahme vor Feuchte und Verunreinigung schützen.
Bestimmungsgemäße Verwendung
Die optoelektronischen Sensoren WTB11-2 und WTF11-2 werden
zum optischen, berührungslosen Erfassen von Sachen eingesetzt.
Inbetriebnahme
1
WTB11-2
Bewegungsrichtung des Objektes relativ zum Taster einhalten.
Empndlichkeit auf „max.“ stellen. Objekt positionieren. Lichteck auf
Objekt ausrichten. Gelbe Empfangsanzeige muss permanent leuchten.
Objekt entfernen, gelbe Empfangsanzeige leuchtet nicht mehr (kein
Hintergrundeinuss vorhanden). Einstellung ist beendet.
Falls die gelbe Empfangsanzeige trotzdem leuchtet (Hintergrund-
einuss zu stark), Empndlichkeit reduzieren bis die gelbe Empfangs -
anzeige erlischt, Objekt erneut positionieren.
Wenn gelbe Empfangsanzeige leuchtet, ist die Einstellung beendet,
falls nicht, Einsatzbedingungen wie Tastweite, Objektgröße und Re-
missionsvermögen des Tastgutes sowie des Hintergrundes überprüfen
und mit der Kennlinie im Diagramm vergleichen.
2 WTF11-2
Lichteck auf Hintergrund (z. B. Förderband) ausrichten. Hintergrund
wird sicher erkannt, wenn gelbe LED leuchtet. Leuchtet sie nicht,
TW-Einsteller in Richtung MIN drehen bis sie leuchtet.
Objekt in Strahlengang positionieren Bewegungsrichtung des
Objektes relativ zum Taster einhalten.
Objekt wird korrekt erfasst,wenn gelbe LED erlischt. Leuchtet
gelbe LED, TW-Einsteller Richtung MAX drehen bis sie erlischt.
Objekt erfernen, gelbe LED muss leuchten. Leuchtet sie nicht,
Licht taster neu justieren, reinigen, bzw. Einsatzbedingungen
überprüfen und Justagevorgang wiederholen
Wartung
SICK-Lichtschranken sind wartungsfrei.
Wir empfehlen, in regelmäßigen Abständen
– die optischen Grenzächen zu reinigen,
– Verschraubungen und Steckverbindungen zu überprüfen.
Veränderungen an Geräten dürfen nicht vorgenommen werden.
More representatives and agencies at www.sick.com ∙ Subject to change
without notice ∙ The specied product features and technical data do not
represent any guarantee.
Weitere Niederlassungen nden Sie unter www.sick.com ∙ Irrtümer
und Änderungen vorbehalten ∙ Angegebene Produkteigenschaften und
technische Daten stellen keine Garantieerklärung dar.
Plus de représentations et d’agences à l’adresse www.sick.com ∙ Sujet à
modication sans préavis ∙ Les caractéristiques de produit et techniques
indiquées ne constituent pas de déclaration de garantie.
Para mais representantes e agências, consulte www.sick.com ∙ Alterações
poderão ser feitas sem prévio aviso ∙ As características do produto e os
dados técnicos apresentados não constituem declaração de garantia.
Altri rappresentanti ed agenzie si trovano su www.sick.com ∙ Contenuti
soggetti a modiche senza preavviso ∙ Le caratteristiche del prodotto e i
dati tecnici non rappresentano una dichiarazione di garanzia.
Más representantes y agencias en www.sick.com ∙ Sujeto a cambio sin
previo aviso ∙ Las características y los datos técnicos especicados no
constituyen ninguna declaración de garantía.
欲了解更多代表机构和代理商信息,请登录 www.sick.com ∙
如有更改, 不另行通知对所给出的产品特性和技术参数
的正确性不予保证。
その他の営業所は www.sick.com よりご覧ください予告なしに変更される
ことがあります記載されている製品機能および技術データは保証を明示す
るものではありません。
WTB11-2 /
WTF11-2
1
L+
Q
Q
M
4
2
3
brn
blk
wht
blu
1
L+
Q
Q
M
4
2
3
brn
blk
wht
blu
L+
Q
Q
M
brn
blk
wht
blu
WTB11-2P / N / K2461
WTB11-2P / Nxx31 WTF11-2P / Nxx31
Recommended operating range Empfohlene Betriebsreichweite Portée de service conseillée Alcance operacional recomendado 30 ... 800 mm
1)
20 … 350 mm
1)
35 … 350 mm
1)
Light spot diameter / distance Lichtfleckdurchmesser / Entfernung Diamètre de la tache lumineuse / distance Diâmetro do ponto de luz / distância 6 mm @ 200 mm 6 mm @ 200 mm
Supply voltage V
S
Versorgungsspannung U
V
Tension d‘alimentation U
V
Tensão de força U
V
DC 10 ... 30 V
2)
DC 10 ... 30 V
2)
Output current I
max
Ausgangsstrom I
max.
Courant de sortie I
max.
Corrente de saída I
max.
100 mA 100 mA
Response time Ansprechzeit Temps de réponse Tempo de reação < 2.5 ms
3)
< 2.5 ms
3)
Switching frequency Schaltfolge max. Fréquence max. Sequência max. de sinais 200 Hz
4)
200 Hz
4)
Enclosure rating Schutzart Type de protection Tipo de proteção IP 67 IP 67
Protection class Schutzklasse Classe de protection Classe de proteção
5)
5)
Circuit protection Schutzschaltungen Circuits de protection Circuitos protetores A, B, C
6)
A, B, C
Ambient operating temperature Betriebsumgebungstemperatur Température ambiante Temperatura ambiente de operação -30 ... +60 °C -30 ... +60 °C
1)
Object 90 % reflection according to DIN 5033
2)
Limit values: Operation in
short-circuit protected network
max. 8 A ripple
max. 5 V
pp
3)
With light / dark ratio 1:1
4)
Signal transit time with resistive load
5)
Reference voltage 50 V DC
6)
A = V
S
connections reversepolarity protected
B = Outputs short-circuit protected suppression
C = Interference pulse suppression
1)
Objekt 90 % Remission nach DIN 5033
2)
Grenzwerte: Betrieb im
kurzschlussgeschützen Netz
max. 8 A; Restwelligkeit
max. 5 V
SS
3)
Bei Hell / Dunkelverhältnis 1:1
4)
Signallaufzeit bei ohmscher Last
5)
Bemessungsspannung DC 50 V
6)
A = U
V
-Anschlüsse verpolsicher
B = Ausgänge kurzschlussfest
C = Störimpulsunterdrückung
1)
Objet Luminance de 90 % selon DIN 5033
2)
Valeurs limites Service dans un réseau
protégév contre les courts-circuits 8 A au
max. Ondulation résiduelle max. 5 V
SS
3)
Pour un rapport clair / sombre 1:1
4)
Durée du signal en charge ohmique
5)
Tension de calcul 50 V c.c.
6)
A = Raccordements U
V
protégés contre
les inversions de polarité
B = Sorties sans court-circuit
C = Suppression des impulsions parasites
1)
Objeto: 90 % de remissão segundo DIN 5033
2)
Valores limite Operação em rede protegida
contra curto-circuitos max. 8 A Ondulação
residual max. 5 V
SS
3)
Com uma relação luminoso / escuro de 1:1
4)
Tempo de transição do sinal com carga ôhmica
5)
Tensão de dimensionamento DC 50 V
6)
A = Conexões U
V
protegidas contra inversão de polos
B = Saídas à prova de curto-circuito
C = Supressão de impulsos parasitas
WTB11-2P / N / K2461
WTB11-2P / Nxx31 WTF11-2P / Nxx31
Distanza di lavoro consigliata Alcance de servicio recomendado
建议的有效工作距离 推奨動作範囲
30 ... 800 mm
1)
20 … 350 mm
1)
35 … 350 mm
1)
Diametro punto luminoso / distanza Diámetro / distancia de mancha de luz 光点直径 / 距离 スポット径 / 距離 6 mm @ 200 mm 6 mm @ 200 mm
Tensione di alimentazione U
V
Tensión de alimentación U
V
电源电压U
V
供給電圧 U
V
DC 10 ... 30 V
2)
DC 10 ... 30 V
2)
Corrente di uscita I
max.
Corriente de salida I
max.
输出电流I
max.
最大出力電流 I
max.
100 mA 100 mA
Tempo di risposta Tiempo de reacción
触发时间 応答時間
< 2.5 ms
3)
< 2.5 ms
3)
Sequenza signali max. Secuencia de señales max. 信号流 max. 切替順序 max. 200 Hz
4)
200 Hz
4)
Tipo di protezione Tipo de protección
保护种类 保護等級
IP 67 IP 67
Classe di protezione Protección clase
保护级别 保護クラス
5)
5)
Commutazioni di protezione Circuitos de protección
保护电路 保護回路
A, B, C
6)
A, B, C
Temperatura ambiente circostante Temperatura ambiente de servicio
工作环境-温度 使用周囲温度
-30 ... +60 °C -30 ... +60 °C
1)
Oggetto 90 %, remissione sec. DIN 5033
2)
Valori limite Funzionamento in rete con
protezione dai cortocircuiti max. 8 A
ondulazione residua max. 5 V
SS
3)
Con relatio chiaro / scuro 1:1
4)
Tempo di continuare de segnale a resistenza ohmica
5)
Tensione di taratura DC 50 V
6)
A = U
V
-collegamenti con protez. contro inversione di poli
B = Uscite resistenti al corto circuito
C = Soppressione impulsi di disturbo
1)
Objeto 90 % de remission en base a DIN 5033
2)
Valores límite Funcionamiento en la red
protegida contra cortocircuito, max. 8 A
ondulación residual max. 5 V
SS
3)
Con una relación claro / oscuro de 1:1
4)
Duración de la señal con carga óhmica
5)
Tensión tolerable DC 50 V
6)
A = Conexiones U
V
a prueba de inversión de polaridad
B = Salidas a prueba de cortocircuitos
C = Represión de impulso de interferencia
1)
90 % 漫反射比物体按照 DIN 5033
2)
操作电流:在防短路的网络里, 最大8
极限值剩余波纹度 max. 5 V
SS
3)
/ 暗比 1:1
4)
电阻性负载时,传感器检测到变化时输出信号的转
换时间
5)
限定电压 DC 50 V
6)
A = U
V
-接头防反接
B = 防短路的输出端
C = 消除干扰脉冲
1)
対象物 90 % の反射率 DIN 5033 に準拠
2)
限界値:短絡防止回路での動作
最大 8 A、残留リップル
最大 5 V
SS
3)
明暗比率 1:1の場合
4)
抵抗負荷における信号遷移時間
5)
定格電圧 DC 50 V
6)
A = U
V
接続 逆接保護
B = 短絡防止出力
C = 干渉パルス制御
------------------------------------------------------- 8015099.10DD 1213 COMAT -----------------------------------------------------
0 100
(3.94)
300
(11.81)
500
(19.69)
700
(27.56)
900
(35.43)
1100
(43.31)
30
15
20
25
10
0
5
% of sensing distance
Distance in mm (inch)
WTB11-2P / N / K2461
6% / 90%
18% / 90%
90% / 90%
1000
(3.94)
200
(7.87)
300
(11.81)
400
(15.75)
500
(19.69)
30
15
20
25
10
0
5
% of sensing distance
Distance in mm (inch)
WTB11-2P / Nxx31
6% / 90%
18% / 90%
90% / 90%
400
(1.57)
80
(3.15)
120
(4.72)
160
(6.30)
200
(7.87)
0
-5
-4
-3
-2
-1
-6
-8
-7
Distance in mm (inch)
% of sensing distance
6% / 90%
18% / 90%
90% / 90%
WTF11-2P / Nxx31
19.4
(0.76)
21.3
(0.84)
32 (1.26)
15.6
(0.61)
ø 4.2
(0.91)
7.3
(0.29)
3.2
(0.13)
23.1
(0.91)
6.1
(0.24)
48.5
(1.91)
5.1
(0.2)
42
(1.65)
D
Q (PNP)
Q (NPN)
L
L
1
0
1
0
1
0
1
0
D
WTB11-2P / N / K2461
WTF11-2P / N2431
WTF11-2P / N1131
1 + 2
WTB11-2P / N2461
WTF11-2P / N2431
WTB11-2K2461 WTB11-2P / N1161
WTF11-2P / N1131
A
WTB11-2P / N / K2461
WTB11-2P / N2431
WTF11-2P / N2431
D = dark-switching / dunkelschaltend
L = light-switching / hellschaltend
2006/42/EG
NO
SAFETY
BZ int48
Please find detailed addresses and further locations in all major industrial
nations at www.sick.com
Australia
Phone +61 (3) 9457 0600
Austria
Phone +43 (0) 2236 62288-0
Belgium/Luxembourg
Phone +32 (0) 2 466 55 66
Brazil
Phone +55 11 3215-4900
Canada
Phone +1 905.771.1444
Czech Republic
Phone +420 2 57 91 18 50
Chile
Phone +56 (2) 2274 7430
China
Phone +86 20 2882 3600
Denmark
Phone +45 45 82 64 00
Finland
Phone +358-9-25 15 800
France
Phone +33 1 64 62 35 00
Germany
Phone +49 (0) 2 11 53 01
Hong Kong
Phone +852 2153 6300
Hungary
Phone +36 1 371 2680
India
Phone +91-22-6119 8900
Israel
Phone +972-4-6881000
Italy
Phone +39 02 27 43 41
Japan
Phone +81 3 5309 2112
Malaysia
Phone +603-8080 7425
Mexico
Phone +52 (472) 748 9451
Netherlands
Phone +31 (0) 30 229 25 44
New Zealand
Phone +64 9 415 0459
Norway
Phone +47 67 81 50 00
Poland
Phone +48 22 539 41 00
Romania
Phone +40 356-17 11 20
Russia
Phone +7 495 283 09 90
Singapore
Phone +65 6744 3732
Slovakia
Phone +421 482 901 201
Slovenia
Phone +386 591 78849
South Africa
Phone +27 (0)11 472 3733
South Korea
Phone +82 2 786 6321
Spain
Phone +34 93 480 31 00
Sweden
Phone +46 10 110 10 00
Switzerland
Phone +41 41 619 29 39
Taiwan
Phone +886-2-2375-6288
Thailand
Phone +66 2 645 0009
Turkey
Phone +90 (216) 528 50 00
United Arab Emirates
Phone +971 (0) 4 88 65 878
United Kingdom
Phone +44 (0)17278 31121
USA
Phone +1 800.325.7425
Vietnam
Phone +65 6744 3732
BZ int48
Please find detailed addresses and further locations in all major industrial
nations at www.sick.com
Australia
Phone +61 (3) 9457 0600
Austria
Phone +43 (0) 2236 62288-0
Belgium/Luxembourg
Phone +32 (0) 2 466 55 66
Brazil
Phone +55 11 3215-4900
Canada
Phone +1 905.771.1444
Czech Republic
Phone +420 2 57 91 18 50
Chile
Phone +56 (2) 2274 7430
China
Phone +86 20 2882 3600
Denmark
Phone +45 45 82 64 00
Finland
Phone +358-9-25 15 800
France
Phone +33 1 64 62 35 00
Germany
Phone +49 (0) 2 11 53 01
Hong Kong
Phone +852 2153 6300
Hungary
Phone +36 1 371 2680
India
Phone +91-22-6119 8900
Israel
Phone +972-4-6881000
Italy
Phone +39 02 27 43 41
Japan
Phone +81 3 5309 2112
Malaysia
Phone +603-8080 7425
Mexico
Phone +52 (472) 748 9451
Netherlands
Phone +31 (0) 30 229 25 44
New Zealand
Phone +64 9 415 0459
Norway
Phone +47 67 81 50 00
Poland
Phone +48 22 539 41 00
Romania
Phone +40 356-17 11 20
Russia
Phone +7 495 283 09 90
Singapore
Phone +65 6744 3732
Slovakia
Phone +421 482 901 201
Slovenia
Phone +386 591 78849
South Africa
Phone +27 (0)11 472 3733
South Korea
Phone +82 2 786 6321
Spain
Phone +34 93 480 31 00
Sweden
Phone +46 10 110 10 00
Switzerland
Phone +41 41 619 29 39
Taiwan
Phone +886-2-2375-6288
Thailand
Phone +66 2 645 0009
Turkey
Phone +90 (216) 528 50 00
United Arab Emirates
Phone +971 (0) 4 88 65 878
United Kingdom
Phone +44 (0)17278 31121
USA
Phone +1 800.325.7425
Vietnam
Phone +65 6744 3732
SICK AG, Erwin-Sick-Strasse 1, D-79183 Waldkirch
FRANÇAIS
Manuel d’utilisations
Remarques relatives à la sécurité
> Il ne s’agit pas d’un composant de sécurité conformément à la
Directive CE sur les machines.
> Lire le manuel d’utilisation avant la mise en service.
> Faire eectuer le raccordement, le montage et le réglage uniquement
par un personnel spécialisé.
> Protéger l’appareil de l’humidité et des impuretés lors de la mise en
service.
Utilisation conforme
Les capteurs opto-électroniques WTB11-2 et WTF11-2 doivent être utilisés
pour la détection optique d’objets sans contact.
Mise en service
1
WTB11-2
Maintenir le sens de déplacement de l’objet relativement vers
le détecteur.
Placer la sensibilité sur « max. » Remettre l’objet en position. Orienter
le spot lumineux vers l’objet. Le témoin de réception jaune doit rester
allumé.
Enlever l’objet. Le témoin jaune s’éteint (pas d’inuence de l’arrière-
plan). Le réglage est terminé.
Si le témoin jaune ne devait pas s’éteindre (l’inuence de l’arrière-
plan est trop forte), réduire la sensibilité jusqu’à ce que le témoin
jaune s’éteigne et remettre l’objet en place.
Une fois que le témoin se rallume, le réglage est alors terminé.
Dans le cas contraire, contrôler les conditions de l’utilisation telles
que la portée de détection, la taille de l’objet et le taux de réexion
de l’objet à détecter et comparer avec la courbe du digramme.
2 WTF11-2
Orienter le spot lumineux sur l’arrière-plan (un tapis convoyeur
par ex.). L’arrière-plan va certainement être détecté, si le témoin
jaune s’allume. S’il ne s’allume pas, faire tourner le régulateur TW
dans le sens MIN jusqu’à ce que le témoin s’allume. Placer l’objet
dans le champ du faisceau.
Maintenir le sens de déplacement de l’objet relativement vers le
détecteur. Lobjet est correctement détecté si le témoin jaune s’éteint.
Si le témoin s’allume, faire tourner le régulateur TW dans le sens MAX
jusqu’à ce que le témoin s’éteigne.
Enlever l’objet, le témoin jaune doit s’allumer. Dans le cas contraire,
réajuster ou nettoyer le témoin lumineux, contrôler les conditions
d’utilisation et répéter la procédure de réglage.
Maintenance
Les barrières lumineuses SICK sont sans entretien. Nous vous
recommandons de procéder régulièrement
- au nettoyage des surfaces optiques
- au contrôle des liaisons vissées et des connexions
Ne procédez à aucune modication sur les appareils.
PORTUGUÊS
Instruções de operação
Notas de segurança
> Os componentes de segurança não se encontram em conformidade
com a Diretiva Europeia de Máquinas.
> Ler as instruções de operação antes da colocação em funcionamento.
> A conexão, a montagem e o ajuste devem ser executados somente
por pessoal técnico qualicado.
> Durante o funcionamento, manter o aparelho protegido contra
impurezas e umidade.
Especificações de uso
Os sensores optoeletrônicos WTB11-2 e WTF11-2 são utilizados
para a detecção óptica, sem contato, de objetos.
Colocação em funcionamento
1
WTB11-2
Manter a direção do movimento do objeto em relação ao objeto.
Ajustar a sensibilidade para “máx.”. Posicionar o objeto. Alinhar o
ponto luminoso sobre o objeto. O indicador de recepção amarelo
deve estar permanentemente aceso.
Remover o objeto, o indicador de recepção amarelo não está mais
aceso (não há nenhuma interferência do plano de fundo). Ajuste
nalizado.
Caso o indicador de recepção ainda continue aceso (interferência
de fundo excessivamente forte), reduzir a sensibilidade até que
o indicador de recepção amarelo apagar e reposicionar o objeto.
O indicador de recepção amarelo acende quando o ajuste está
nalizado. Se ele não acender, vericar as condições de operação,
como alcance de detecção, dimensão e reetividade do objeto, bem
como o plano de fundo, e compará-los com a curva característica no
diagrama.
2 WTF11-2
Alinhar o ponto luminoso sobre o plano de fundo (p. ex. esteira de
transporte). Quando o fundo é detectado, o LED amarelo acende.
Se não acender, girar o botão de ajuste de distância na direção MIN
até o LED acender Posicionar o objeto na trajetória do ponto luminoso.
Manter a direção do movimento do objeto em relação ao objeto.
O objeto é corretamente detectado quando o LED amarelo apaga.
Se o LED amarelo continuar aceso, girar o botão de ajuste de
distância na direção MÁX até o LED apagar.
Remover o objeto, o LED amarelo deve acender. Se não acender,
reajustar, limpar e / ou vericar as condições de operação do sensor
luminoso. Repetir o procedimento de ajuste.
Manutenção
As barreiras de luz SICK não requerem manutenção. Recomendamos
que se efetue em intervalos regulares
- uma limpeza das superfícies ópticas
- uma vericação das conexões roscadas e dos conectores.
Não são permitidas modicações no aparelho.
ITALIANO
struzioni d’uso
Avvertenze sulla sicurezza
> Nessun componente di sicurezza conformemente alla direttiva
macchine UE.
> Prima della messa in funzione leggere le istruzioni d’uso.
> Allacciamento, montaggio e regolazione solo a cura di personale
tecnico specializzato.
> Alla messa in funzione proteggere l’apparecchio dall’umidità
e dalla sporcizia.
Uso conforme allo scopo
I sensori fotoelettronici WTB11-2 e WTF11-2 sono impiegati per
il rilevamento ottico a distanza di oggetti.
Messa in esercizio
1
WTB11-2
Mantenere la direzione di movimento dell’oggetto rispetto al sensore.
Impostare la sensibilità su «max.». Posizionare l’oggetto. Orientare il
sensore in direzione dell’oggetto. L’indicatore di ricezione giallo deve
essere costantemente acceso.
Allontanare l’oggetto, l’indicatore di ricezione giallo si spegne (nessu-
na inuenza dello sfondo). L’impostazione è terminata.
Nel caso in cui l’indicatore di ricezione restasse comunque acceso
(inuenza dello sfondo troppo forte), ridurre la sensibilità nché
l’indicatore di ricezione giallo si spegne e riposizionare l’oggetto.
Quando l’indicatore di direzione si illumina, l’impostazione è
terminata; se questo non accade, vericare le condizioni di impiego
quali la distanza di ricezione, le dimensioni dell’oggetto e il fattore di
riessione dell’oggetto e dello sfondo e confrontarle con la linea di
riferimento del diagramma.
2 WTF11-2
Dirigere il punto luminoso sullo sfondo (ad es. nastro trasportatore).
Lo sfondo viene riconosciuto in modo sicuro quando il LED giallo si
accende. Se questo non accade, ruotare il regolatore della distanza
di ricezione verso MIN nché il LED comincia a lampeggiare.
Posizionare l’oggetto nella traiettoria del raggio. Mantenere la dire-
zione di movimento dell’oggetto rispetto al sensore. Loggetto viene
rilevato correttamente quando il LED giallo si spegne.
Se il LED giallo resta acceso, ruotare il regolatore della distanza
di ricezione verso MAX no al suo spegnimento.
Allontanare l’oggetto, il LED giallo deve essere acceso. In caso
contrario, regolare di nuovo la fotocellula, pulirla e vericarne
le condizioni di impiego e ripetere la procedura di regolazione.
Manutenzione
Le barriere fotoelettriche SICK sono esenti da manutenzione.
Consigliamo di pulire in intervalli regolari
- le superci limite ottiche.
- Vericare i collegamenti a vite e gli innesti a spina.
Non è consentito eettuare modiche agli apparecchi.
ESPAÑOL
Instrucciones de servicio
Indicaciones de seguridad
> No se trata de un componente de seguridad según la Directiva
de máquinas de la UE.
> Lea las instrucciones de servicio antes de efectuar la puesta
en funcionamiento.
> La conexión, el montaje y el ajuste deben ser efectuados
exclusivamente por técnicos especialistas.
> Proteja el equipo contra la humedad y la suciedad durante
la puesta en funcionamiento.
Uso conforme al previsto
Los sensores optoelectrónicos WTB11-2 y WTF11-2 son utilizados
para la captura óptica sin contacto de objetos.
Puesta en servicio
1
WTB11-2
Mantener la dirección de movimiento relativa del objeto respecto
al sensor.
Ajuste la sensibilidad al «max.». Posicione el objeto. Oriente el punto
luminoso hacia el objeto. La indicación de recepción amarilla deberá
iluminarse de modo permanente.
Retirar el objeto, la indicación de recepción amarilla ya no brilla
(no existe inuencia de fondo). Ajuste nalizado.
Si a pesar de ello continua iluminada la indicación de recepción
(inuencia de fondo demasiado intensa), reduzca la sensibilidad
hasta que se apague la indicación de recepción amarilla, posicione
a continuación el objeto de nuevo.
Si se enciende la indicación de recepción amarilla, el ajuste ha
nalizado, en caso contrario, compruebe las condiciones de uso
tales como ancho de exploración, tamaño de objeto y capacidad
de remisión del objeto a captar así como el fondo y compararlo
con la curva de características en el diagrama.
2 WTF11-2
Alinear el punto luminoso en el fondo (p. ej. cinta transportadora).
El fondo es captado con seguridad si se ilumina el LED amarillo.
Si no se ilumina girar el reglaje-TW en dirección MIN hasta se que
se encienda.
Posicionar el objeto en el haz luminoso. Mantener la dirección
de movimiento relativa del objeto respecto al sensor.
El sensor es captado correctamente cuando se apague el LED
amarillo. Si el LED amarillo está encendido, girar el reglaje TW
en dirección MAX hasta que se apague.
Retire el objeto, el LED amarillo deberá estar encendido. Si no se
ilumina, ajustar el sensor de luz de nuevo, límpielo o bien compruebe
las condiciones de aplicación y repita el proceso de ajuste.
Mantenimiento
Las barreras fotoeléctricas SICK no precisan mantenimiento. En intervalos
regulares, recomendamos:
- Limpiar las supercies ópticas externas
- Comprobar las uniones roscadas y las conexiones.
No se permite realizar modicaciones en los aparatos.
中文
操作规程
安全须知
> 本设备非欧盟机械指令中定义的安全部件。
> 调试前请阅读操作规程。
> 仅允许由专业人员进行接线、安装和设置。
> 调试时应防止设备受潮或脏污。
规定用途
光电传感器
WTB11-2 WTF11-2 用于非接触式
光学检测物品。
调试
1 WTB11-2
以扫描仪为参照物,保持目标物体的运动方向。
将灵敏度调至最大”。定位物体。将光斑对准物体。黄色接收指示灯应
当持续点亮。
移除物体,接收指示灯不再亮起(无 背景干扰)。设置已完成。
如果黄色接收指示灯仍然亮起(背景干扰过强),则降低灵敏度,直至
黄色接收指示灯熄灭,然后重新定位物体。
如果黄色接收指示灯亮起,则说明设置已结束;如果未亮起,则检查使
用条件,如待检测物体和背景的扫描范围、大小和反射能力,并与图中
的特征曲线进行比较。
2 WTF11-2
将光斑对准背景(例如输送带)。如果黄色 LED 指示灯
亮起,则说明安全检测到背景。如果未亮起,则将 TW 调节器
沿最小值方向转动,直至其亮起
在光路中定位物体
以扫描仪为参照物,保持目标物体的运动方向。如果黄色
LED 指示灯熄灭,则说明正确检测到物体。如果黄色 LED 指示灯亮起,
则将 TW 调节器沿
最大值方向转动,直至其熄灭。
移除物体,黄色 LED 指示灯应亮起。如果未亮起,则需重新调整并清洁
光电传感器,或者检查使用条件,并重复调整过程。
保养
SICK 光电开关无需保养。我们建议,定期:
- 清洁镜头检测面
- 检查螺丝接头和插头连接。
不得对设备进行任何改装。
日本語
取扱説明書
安全上の注意事項
> 本製品は EU 機械指令の要件を満たす安全コンポーネントではありま
せん。
> 使用を開始する前に取扱説明書をお読みください。
> 接続、取付けおよび設定できるのは専門技術者に限ります。
> 装置を使用開始する際には、濡れたり汚れたりしないように保護して
ください。
用途
光電センサ
WTB11-2 および WTF11-2 は、対象物を光学技術により非接触
で検知するための装置です。
使用開始
1 WTB11-2
対象物の移動方向がセンサに対し、相対的になるように維持します。
感度を「max.」に設定します。対象物を所定の位置に置きます。光点
を対象物に合わせます。黄色い信号強度表示は継続して点灯していな
ければなりません。
対象物を取り除くと、黄色い信号強度表は消えます (背景の及ぼす影響
なし)。設定は完了しました。
黄色い信号強度表示がまだ点灯している場合 (背景の影響力が強すぎ
る) は、黄色い信号強度表示が消えるまで感度を下げ、再び対象物を位
置づけます。
黄色い信号強度表示が点灯している場合、設定は終了しています。
そうでない場合は、検出範囲、対象物の大きさ、対象物ならびに背景
の反射率などの使用条件を点検し、図の指数と比較します。
2 WTF11-2
光点を背景 (例えば搬送ベルト) に合わせます。黄色い LED が点灯する
場合、背景は確実に検出されます。点灯しない場合、点灯するまで検
出距離設定ボタンを MIN の方向に回します。
対象物を光軸上に位置づけます。
対象物の移動方向がセンサに対し相対的になるように維持します。黄
色い
LED が消える場合、対象物は正しく検出されました。黄色い LED
が点灯している場合、消えるまで検出距離設定ボタンを MAX の方向に
回します。
対象物を取り除くと、黄色い LED は点灯しなければなりません。点灯
しない場合、光電スイッチを再び調整し、清掃または使用条件を点検
してから、調節手順を繰り返します。
メンテナンス
SICK の光電スイッチはメンテナンス不要です。推奨する定期的な保全作業
- レンズ境界面の清掃
- ネジ締結と差込み締結の点検
デバイスに変更を加えることは一切禁止されています。
1 / 1