Hitachi DS 18 DJL Handling Instructions Manual

DS18DJL

Handling instructions

Cordless Driver Drill

DS 14DJL

•

DS 18DJL

Keep for future reference

English

2

3

4

5

○

6

○

7

8

○

9

10

11

○

12

○

13

○

14

○

15

L

R

○

R

L

16

17

BSL1815

BSL1415

502

503

504

506

2

1

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

36

30

31

32

33

34

35

42

35

42

37

38

39

40

41

18

English

19

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or serious

injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence

of ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁ ed plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

CONTENTS

GENERAL POWER TOOL SAFETY WARNINGS ........................................19

CORDLESS DRIVER DRILL SAFETY WARNINGS .....................................22

CAUTION ON LITHIUM-ION BATTERY .......................................................23

SYMBOL .......................................................................................................24

SPECIFICATIONS ........................................................................................ 25

STANDARD ACCESSORIES .......................................................................26

OPTIONAL ACCESSORIES (sold separately)..............................................26

APPLICATIONS ............................................................................................26

BATTERY REMOVAL/INSTALLATION ........................................................27

CHARGING ..................................................................................................27

PRIOR TO OPERATION ...............................................................................29

HOW TO USE ...............................................................................................29

MAINTENANCE AND INSPECTION ............................................................34

SERVICE PARTS LIST .................................................................................36

English

20

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool.

Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

power tool.

Do not use a power tool while you are tired or under the inﬂ uence of drugs,

alcohol or medication.

A moment of inattention while operating power tools may result in serious personal

injury.

b) Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the oﬀ position before

connecting to power source and/or battery pack, picking up or carrying the

tool.

Carrying power tools with your ﬁ nger on the switch or energising power tools that have

the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

e) Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn it on and oﬀ .

Any power tool that cannot be controlled with the switch is dangerous and must be

repaired.

ページが読み込まれています...

Hitachi DS 18 DJL Handling Instructions Manual

このマニュアルも適しています

Hitachi DS 18 DJL Handling Instructions Manual

他の言語で

関連論文

その他のドキュメント