15
en
Use
Caution!
When the appliance automatically turns off
after 51/2 minutes of continuous operation
at the 最大(max) speed setting, only use
the 最大(max) speed setting for another
1-2 minutes at the most after turning the
machine back on. Otherwise, the food
may heat up too much and damage the
container.
Notes:
– The status display flashes if the rotary
selector is not at the zero setting when
switched on, if the blender jug has
become detached, or if the electricity
supply has been interrupted. Turn the
rotary selector first to the zero setting
and then continue.
– The rotary selector setting does not
affect the use of the 脉冲(Pulse)
function.
脉冲 (Pulse) button
For switching to the maximum speed
for a short time. The appliance works at
maximum speed while the 脉冲(Pulse)
button is pressed.
Note: The function cannot be used while an
automatic programme is running.
Programme selection buttons
with LEDs
For selecting and starting automatic
programmes. X “Automatic programmes”
see page 17
All LEDs light up after switching on. The
selected programme will start after pressing
the button and the appliance will run
automatically.
Blender jug
For processing up to 2 litres of food. The
blender jug is made of Tritan. Tritan is an
unbreakable plastic with no discernable
taste or smell.
Caution!
Do not expose the blender jug to
temperatures above 80°C.
Lid with locking cap
To securely close the blender jug
during processing. To add chopped or
liquid ingredients, turn the locking cap
anticlockwise and remove.
Pusher
To push ingredients that either stick to
the edge or do not blend well towards the
blender knife. To do so, turn the locking cap
anticlockwise, remove and place the pusher
into the opening. X “Using the pusher” see
page 16
Safety systems
The appliance has various safety systems.
X “Safety systems” see page 18
Use
W Risk of injury!
– Do not insert the mains plug until
all preparations for working with the
appliance are complete and the blender
jug has been correctly positioned on to
the base unit.
– Never put your hand in the blender jug
once it is in place, and always put the lid
on before using the appliance.
Note: The appliance will only work if the
blender jug has been correctly positioned.
X Fig. B
1. Place the base unit onto a stable and
level work surface. Position the cushion
pad on to the base unit, observing the
recess.
Important: Never attach the blender jug
without the cushion pad.
2. Place the blender jug on to the cushion
pad. Make sure the blender jug is firmly
positioned on the appliance.
3. Put the desired ingredients into the
blender jug.
4. Put the lid with the locking cap in place
and press it firmly.
5. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting).