Ultrablend Boost
EN
TH
KO
ZH
VI
MS
-
+
Cancel
A1
B
E
M
C
B1
B2
B3
H
G
J
A2
A3
D
A
I
K
FN
L
2
1
1
2
2
1
5
ENSAFETY WARNINGS
CAUTION: The safety precautions are part of the
appliance. Read them carefully before using your
new appliance for the first time. Keep them in a
place where you can find and refer to them later
on.
The appliance will only start if the jug is correctly
positioned on the motor unit (D) and the lid locked
on the jug.
• Before using your appliance for the first time, rinse the parts that come
into contact with food (jug, lid and measuring cap) with soapy water
CAUTION : Do not immerse the appliance in water (neither the motor
unit nor the jug base). Never put the motor unit (D) under running
water. Clean with a damp cloth and dry it carefully.
The blades are extremely sharp and not removable.
• Make sure all the packaging has been removed before operating the
appliance.
BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
DESCRIPTION
A Lid cap
Lid
Plastic Tritan Jug for cold
preparation
B Lid cap
Lid
Glass Jug for hot preparation
C Pusher
D Motor unit
E Brush
F Screen
G Start/Stop button
H Control display
I Clean button
J Blend button
K Cancel button
L Setting button
M Measuring cup
N Jar indicator
6
USING YOUR APPLIANCE
• Put the appliance on a flat, stable, heat-resistant surface away from
sources of heat or water splashes.
• Position the jug (A or B) correctly on the motor unit Fig. 1 and 2.
• After removing a bowl from the base, wait at least 6 seconds before
repositioning another bowl.
GLASS JAR FOR HOT PREPARATION:
• Add the ingredients into the jug without exceeding the maximum level
indicated:
– 1400 ml max for hot preparation
Automatic function:
How to use :
• Lock the lid on the jug and place the lid cap in position on the lid. The
appliance only starts up once the jug and lid are correctly in place.
• When you plug in the appliance and switch it on, it will make a beep,
and the screen will light up.
• The appliance will be in standby mode. At this stage, you can select a
program by pressing the corresponding button. Button light flashes and
the recipe time information will be displayed.
• Press the start/stop button. Then the appliance starts to work
automatically.
• At the end of the recipe, the blender stops automatically. The appliance
beeps 3 times.
• You can also stop the blending during the cycle:
– press the «Start/stop» button to pause the program (up to 5 minutes,
after which the unit returns to the home screen)
– press the «cancel» button to stop the program and return to the home
screen.
• For hot programs and Heat function, if the power shuts off during
cooking, within 3 minutes if the power is turned back on, the appliance
will restart automatically.
– If the appliance is left unused for 3 minutes, the screen light will go off
and only the start/stop button will remain on.
CAUTION :
• Do not shake the motor unit or the jug when the blender is in use.
7
EN
CAUTION: After running one program, especially if a long processing
time, let the blender rest for minimum 5 minutes before operating it
again.
For hot programs, please note that the time indicated does not take into
account the pre-heating time needed which may vary according to the
initial temperature and quantity of your ingredients (between 5 and 15
minutes).
Press the start/stop button. The recipe cooking time countdown will start.
During the program, if you open the lid of your blender, your appliance
stop automatically thanks to the lid safety.
CAUTION : We recommend not to add ingredients while blending hot
preparations. (risk of splashing). Do not remove the lid cap (B1) from
the lid (B2) during hot preparations. It can reach high temperature
and cause burns.
Hot programs : Soup, Compote, Coulis, Hot sauce, Multigrain milk.
Hot Programs Recipes Step by step Time
Soup
600g pumpkin, 120g
potato, 80g onion, 600 ml
water.
Select Soup program
Press Start/Stop button
30 min
Hot
sauce
500 ml milk, 45g butter,
45g plain flour, nutmeg
(1 pinch)
Select Hot sauce program
Press Start/Stop button
15 min
Coulis
100ml water, 60ml
lemon juice, 100g sugar,
250g bluberries, 250g
strawberries.
Select Coulis program
Press Start/Stop button
15 min
Compote
700g golden delicious
apple, 100 ml water.
Select Compote program
Press Start/Stop button
15 min
Multigrain
milk
100g whole blanched
almonds, 1L water
Select Multigrain milk
program
Press Start/Stop button
25 min
Manual functions:
The manual functions can be used in addition to program mode.
• Clean : allows you to clean your appliance with 150 ml water and
1 drop washing up liquid. Press Clean button. The duration is 30
seconds.
8
The longest working time can not be more than 3 minutes.
• Blend : allows you to freely control the way you want to blend.
Press the blend button, the screen indicates « P » corresponding
to the pulse function but you can choose the blending speed
from 1 to 9 by pressing the setting +/- buttons (L). « H » is the maximum
speed. Then press start/stop button. You can set up the working time by
pressing the setting +/- button (L) between 5 seconds and 3 minutes.
The remaining time appears on the screen. Wait for the blender to stop
automatically. The appliance beeps 3 times.
• Heat : allows you to freely control the way you want to heat.
Press the heat button, the screen indicates « 75 » but you can
choose the heating temperature from 40° up to 100° by pressing
the setting +/- buttons (L). You can set up the working time by pressing
the setting +/- buttons (L) between 5 minutes and 90 minutes. Press
start/stop button. The remaining time appears on the screen. Wait for
the heating to stop automatically. The appliance beeps 3 times at the
end of the program. You can also stop the heating during the cycle by
pressing the start/stop button or the cancel button.
PLASTIC TRITAN JAR FOR COLD PREPARATION
• Add the ingredients into the jug without exceeding the maximum level
indicated:
– 1750 ml max for cold jar
Automatic functions
How to use :
• Lock the lid on the jug and place the lid cap in position on the lid. The
appliance only starts up once the jug and lid are correctly in place.
• When you plug in the appliance and switch it on, it will make a beep,
and the screen will light up.
• The appliance will be in standby mode. At this stage, you can select a
program by pressing the corresponding button. The button light flashes
and the recipe time information will be displayed.
– Before each auto program, you can use vacuum function by pressing
‘vacuum button’, duration: 1min10s
– When you use the vacuum function, ensure the lid cap is screwed on
tight.
9
EN
• Press the start/stop button and the appliance will start.At the end of the
recipe, the blender stops automatically. The appliance beeps 3 times.
– If using the blender function, once the program is complete, press the
middle of the lid cap to open the lid.
• You can also stop the blending during the cycle:
– press the «Start/stop» button to pause the program (up to 5 minutes,
after which the unit returns to the home screen)
– press the «cancel» button to stop the program and return to the home
screen
• You can use the pusher to help the recipes (when no vacuum function)
– Don’t use this jar for hot preparation.
– Don’t immerse the lid in water
To add ingredients while blending for cold preparation only, remove the
lid cap (A) from the lid (B) and add the ingredients through the feeder
hole. Beware of the risk of spatter.
CAUTION : Do not remove the lid cap (A) from the lid during vacuum
Cold programs : Ice crush, Green smoothie, Milk shake, Ice cream, Peanut
butter
Cold Programs Recipes Step by step Time
Green
smoothie
240g peeled apple Granny
Smith (2 apples), 60g celery
stick (without leaf),
200g cucumber, 20g kale
leaf, 80g lime juice, 400g
water, 60g Agave Syrup,
20g of spinach leaves
Select green smoothie
program
Press Start/Stop button
1min 10s
Ice
cream
450g of frozen strawberry +
240ml of milk +
130g of sugar
Select ice cream program
Press Start/Stop button
1min 10s
Peanut
butter
400g of unsalted peanuts +
75g of slivered almonds +
125g of pecan nuts
Select peanut butter
program
Press Start/Stop button
2min 15s
Ice crush
8 x Ice cube 30x30x40 mm
Select ice crush program
Press Start/Stop button
1min
Milk
shake
250g vanilla ice cream +
1 banana (100g) +
250ml milk
Select milkshake program
Press Start/Stop button
1min
10
Manual functions
The manual functions can be used in addition to program mode.
• Clean : allows you to clean your appliance with 150 ml water and
1 drop washing up liquid. Press Clean button. The duration is 30
seconds.
The longest working time cannot be more than 3 minutes.
• Blend : allows you to freely control the way you want to blend.
Press the blend button, the screen indicates « P » corresponding
to the pulse function but you can choose the blending speed
from 1 to 9 by pressing the setting +/- button (L). «H» is the maximum
speed. Then press start/stop button. You can set up the working time by
pressing the setting +/- button (L) between 5 seconds and 3 minutes.
The remaining time appears on the screen. Wait for the blender to stop
automatically. The appliance beeps 3 times.
• Vacuum : Before using the vacuum function, lock the lid cap by
rotating it in such a way that the arrow on the lid cap is aligned
with the «air out» pictogram . Begin vacuum process. After
1min10s, you will be able to select an automatic program (compatible
with smoothie and milkshake programs). At the end of the program,
press the vacuum button in the middle of the lid cap and remove the
cap to remove the lid and pour your preparation.
OTHER FUNCTIONS
• Press the «Start/stop» button to pause the program. You can pause your
appliance up to 5 minutes, after which the appliance returns to the
home screen.
• If you keep pressing the «Start / Stop» button for 3 seconds, the
appliance beeps 3 times before going into «Stand by» mode. No more
button lights are visible except the «Start / Stop» button.
Overload protection
• The appliance is equipped with overload protection. This prevents the
motor from being damaged by overloading.
• If the appliance switches off during operation, proceed as follows :
– Switch the appliance off using the start/stop button, unplug and leave
it to cool down for approximately 15-20 minutes.
– Reconnect the appliance to the power supply and resume blending.
11
EN
• Cancel : You can stop the blending during the cycle by pressing the
«cancel» logo. The appliance stops and returns to the home screen.
CLEANING
• Clean the jug immediately after use.
• For easy cleaning, you can use the Clean program :
– Put 150ml of water and 1 drop of washing up liquid in the jug. Press
the Clean button.
• An excess of washing up liquid creates more foam and consequently
can lead to overflowing. Finish cleaning the jug with the aid of a sponge.
• Rinse the inside of the jug and the lid under running water.
• If your appliance needs deep cleaning, you can use a mixture of warm
water and baking soda. Let it soaked for few hours to help get it clean.
• Use a damp cloth to clean the motor unit (D). Dry it carefully.
• The detachable parts (lid, lid cap, measuring cup) can be cleaned with
a sponge and hot soapy water. You can also use the brush to clean the
inside of the jug.
Caution:
• Ensure that no food or liquid is left in the jug; the jug is not meant for
storing food in the refrigerator or freezer.
• To clean the outside of the motor unit and the walls of the jug, use a
damp cloth.
• Do not immerse the appliance in water (neither the motor unit nor the
jug base). Never put the motor unit (D) under running water.
• The jug, lid cap must not go in the dishwasher.
12
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems Causes Solutions
Appliance does not work
The plug is not connected.
Connect the appliance to
a socket with the same
voltage as indicated on
the rating plate of the
appliance.
The blender jug is not
positioned correctly on the
motor unit or the jug and
lid are correctly in place
and are not locked onto the
motor unit.
Check that the blender jug
and the lid are positioned
properly on the motor
unit as explained in the
instructions.
Appliance, keypad or
program not responding
Unplug the appliance, wait
for 1 minute and plug in
again.
In case of overheating
Switch the appliance off
using the start/stop button,
unplug and leave it to cool
down for approx.15-20
minutes.
Overflowing
Reduce the quantity of the
ingredients processed.
The appliance stopped
while in use
Overload or overheating
Switch the appliance off
using the start/stop button,
unplug and leave it to cool
down for approx.15-20
minutes.
Reconnect the appliance
to the power supply and
resume blending.
Excessive vibrations
The product is not placed
on a flat surface.
Place the appliance on a
flat surface.
Volume of ingredients is
too high.
Reduce the quantity of
ingredients processed.
Leak or overflow from
the lid
Volume of ingredients is
too high.
Reduce the quantity of
ingredients processed.
The lid is not correctly
positioned.
Place the lid correctly on
the blender jug.
13
EN
If your appliance is still not running properly, please contact the customer
service department for your country.
Problems Causes Solutions
Leak from the bottom of
the blender jug
Deterioration of the
watertightness of the
appliance.
Caution : the blades are not
removable.
Contact the consumer
service, see contact
information in the warranty
leaflet.
The blades do not turn
easily
Pieces of food too large or
too hard.
Reduce the size or quantity
of ingredients processed.
The blended liquid is too
hot and distorted the silicon
gasket.
Contact the consumer
service, see contact
information in the warranty
leaflet.
Cooking problem
The food is not cooked
enough or / The food is
overcooked
Use manual function to
adapt time of use and
heating temperature
Food sticks to the bottom
Use manual function to
adapt time of use and
heating temperature. And
see cleaning instructions
I do not have access to
good recipes
The appropriate jar is not
used
Verifying that the
appropriate jar is used
The overflow sensor placed
in the hot jar lid is not clean
Clean all the part of the
hot jar lid
14
重要安全事項
注意: 使用本裝置時請遵照安全指示。首次使用
本裝置前請仔細閱讀安全措施說明，並妥為保
存，留待日後參考。
榨汁杯必須正確裝在摩打組(D)上，且榨汁杯蓋
已鎖好，本裝置才會啟動。
• 初次使用本裝置前，請用肥皂水清潔所有與食物接觸的部分（攪拌
杯、杯蓋、量杯）。
注意: 請勿將本裝置浸在水裏（不論是摩打組或攪拌杯座）。切勿用
水沖洗摩打組（D）。小心用濕布清潔然後抹乾。
刀片異常鋒利，且無法拆除。
• 使用本裝置前請確定已移除所有包裝物。
初次使用本裝置前
描述
A 頂蓋
杯蓋
冷食材Tritan杯
B 頂蓋
杯蓋
熱食材玻璃杯
C 攪拌棒
D 摩打組
E 清潔刷
F 螢幕
G 「Start/Stop」
（開始/停止）鍵
H 控制螢幕
I 清潔鍵
J 攪拌鍵
K 「Cancel」（取消）鍵
L 設定鍵
M 量杯
N 攪拌杯底指示燈
15
ZH
使用本裝置
• 請將本裝置放在平坦、穩定、隔熱的表面，並遠離熱源及避免被水
濺到。
• 將攪拌杯(A或B)正確裝在摩打組上。圖1及圖2。
• 從底座拿走杯後，請等待至少 6 秒，才放上另一個杯.
熱食材玻璃杯﹕
• 攪拌杯內所放材料不宜超過指定的最高位﹕
– 處理熱食材時不可超過1400毫升
全自動功能﹕
使用方法﹕
• 鎖好攪拌杯蓋，並裝好頂蓋在杯蓋上。攪拌杯及杯蓋必須裝好，本
裝置才會啟動。
• 插上電源並開動後，裝置會發出一聲「嗶」並亮起螢幕。
• 裝置將處於待機模式。此時可按相應的程式按鈕選擇程式。鍵上的
燈會閃爍；螢幕顯示程式的時間資訊。
• 按「Start/Stop」（開始/停止）鍵。裝置開始自動運作。
• 程式結束時，攪拌器會自動停止。裝置會響3次。
• 運作期間也可以用以下方法停止﹕
–按「Start/Stop」（開始/停止）鍵暫停程式（最長5五分鐘，此後
裝置會回到主畫面）
–按「Cancel」（取消）鍵停止程式並回到主畫面。
• 熱食材程式及加熱功能中，如電力在烹調期間中斷，只要在3分鐘內
重新開動裝置，裝置會自動重啟。
–如裝置閑置3分鐘，螢幕燈會熄滅，僅「Start/Stop」（開關制）亮
起。
注意:
• 當攪拌器正在運作時，請勿搖動摩打組或榨汁杯。
注意: 使用一項程式後（特別是經過長時間使用），須冷卻最少5分鐘
後方可再用。
使用熱程式時，請注意螢幕所顯示的時間不包括預熱時間；預熱時間
會因應起始溫度及所放材料量而不同（5至15分鐘）。
按「Start/Stop」（開始/停止）鍵。開始倒數食譜的烹調時間。
本裝置的杯蓋有安全設計，如在程式進行期間打開攪拌杯蓋，攪拌器
16
會自動停止。
注意: 攪拌熱食材期間，不建議添加材料。（以防材料濺出）。攪拌
熱食材期間，請勿將杯蓋(B2)上的頂蓋(B1)拆出。熱程式的高溫可造
成燙傷。
熱食材程式﹕湯、 米糊/水果薈、果泥、熱醬汁、五穀奶。
熱食材程式 食譜 步驟 時間
湯
南瓜600克、薯仔120克、
洋葱80克、水600毫升。
選擇湯程式
按「Start/Stop」
（開始/停止）鍵
30分鐘
熱醬汁
奶500毫升、牛油45克、
中筋麪粉45克、豆蔻粉
(1撮）
選擇熱醬汁程式
按「Start/Stop」
（開始/停止）鍵
15 分鐘
果泥
水100毫升、檸檬汁60毫
升、糖100克、藍莓250
克、士多啤梨250克。
選擇果泥程式
按「Start/Stop」
（開始/停止）鍵
15 分鐘
米糊/
水果薈
金冠蘋果（Gold delicious
apple）700克、水100
毫升。
選擇水果薈程式
按「Start/Stop」
（開始/停止）鍵
15 分鐘
五穀奶
去皮杏仁100克、水1公升 選擇五穀奶
按「Start/Stop」
（開始/停止）鍵
25分鐘
手動功能﹕
除內置程式外，另有各種手動功能。
• 清潔﹕使用本功能時，加入150毫升水及1滴洗潔精。按「清
潔」鍵。功能為時30秒。
最長運作時間不可超過3分鐘。
• 攪拌﹕隨意選擇攪拌方式。按攪拌鍵，螢幕顯示「P」，然而
此時可按設定鍵+/-（L）選擇1至9的攪拌速度。「H」為最
高轉速。然後按「Start/Stop」（開始/停止）鍵。按設定鍵
+/-（L）可調校運作時間，可選時間由5秒至3分鐘。螢幕會顯示餘
下時間。等待攪拌機自動停止。裝置會響3次。
• 加熱﹕可隨意選擇加熱方式。按加熱鍵，螢幕顯示「75」，
然而此時可按設定鍵+/-（L）選擇40°至100°的加熱溫度。
按設定鍵+/-（L）可調校運作時間，可選時間為5至90分
鐘。按「Start/Stop」（開始/停止）鍵。螢幕會顯示餘下時間。等
17
ZH
待加熱自動停止。裝置會在程式結束時發出3聲「嗶」。另外亦可在
程式進行中按「Start/Stop」（開始/停止）鍵或「Cancel」（取
消）鍵停止加熱。
冷材料Tritan杯
• 攪拌杯內所放材料不宜超過指定的最高位﹕
– 冷材料膠杯的最大容量為1750毫升
全自動功能﹕
使用方法﹕
• 蓋好攪拌杯蓋，將其鎖緊，然後將頂蓋裝好。攪拌杯及杯蓋必須裝
好，本裝置才會啟動。
• 插上裝置電源並按開啟裝置時，裝置會發出一聲「嗶」，螢幕會亮
起。
• 裝置將處於待機模式。此時可按相應的程式按鈕選擇程式。鍵上的
燈會閃爍；螢幕顯示程式的時間資訊。
–啟動每項自動程式前都可按「真空鍵」，使用抽真空功能，時間為1
分鐘10秒
–使用抽真空功能時，須確定頂蓋已經擰緊。
• 按「Start/Stop」（開始/停止）鍵啟動裝置。食譜結束時，攪拌機
會自動停止。裝置會響3次。
–使用攪拌功能時，當程式結束後，可按頂蓋的中間打開攪拌杯蓋。
• 運作期間也可以用以下方法停止﹕
–按「Start/Stop」（開始/停止）鍵可暫停程式（最長5分鐘，此後
裝置會回到主畫面）。
–按「Cancel」（取消）鍵可停止程式並回到主畫面。
• 可使用攪拌棒輔助攪拌（不適合抽真空功能之中）
–本攪拌杯不適合處理熱食材。
–杯蓋不可浸水。
攪拌冷食材期間（熱食材攪拌不適用），如要添加材料，可拆出杯蓋
(B)上的頂蓋(A)，透過頂孔放入材料。小心材料濺出。
注意: 抽真空期間請勿打開頂蓋(A)
冷材料程式﹕刨冰、蔬果汁、奶昔、雪糕、花生醬
18
冷食材程式 食譜 步驟 時間
蔬果汁
去皮 翠玉蘋果(Granny
Smith)240克(2個)、西芹
莖60克（去葉）、青瓜
200克、羽衣甘藍20克、
青檸汁80克、水400克、
龍舌蘭糖漿60克、菠菜
葉20克
選擇蔬果汁程式
按「Start/Stop」
（開始/停止）鍵
1分鐘
10秒
雪糕
冷凍士多啤梨450克+奶
240毫升+糖130克
選擇雪糕程式
按「Start/Stop」
（開始/停止）鍵
1分鐘
10秒
花生醬
無鹽花生400克+杏仁碎75
克+山核桃125克
選擇花生醬程式
按「Start/Stop」
（開始/停止）鍵
2分鐘
15秒
刨冰
30x30x40毫米冰塊8塊
選擇刨冰程式
按「Start/Stop」
（開始/停止）鍵
1分鐘
奶昔
雲呢拿味雪糕250克+
香蕉1條(100克)+
奶250毫升
選擇奶昔程式
按「Start/Stop」
（開始/停止）鍵
1分鐘
手動功能
除內置程式外，另有各種手動功能。
• 清潔﹕使用本功能時，加入150毫升水及1滴洗潔精。按「清
潔」鍵。功能為時30秒。
最長運作時間為3分鐘。
• 攪拌﹕隨意選擇攪拌方式。按攪拌鍵，螢幕顯示「P」，然而
此時可按設定鍵+/-（L）選擇1至9的攪拌速度。「H」為最
高轉速。然後按「Start/Stop」（開始/停止）鍵。按設定鍵
+/-（L）可調校運作時間，可選時間為5秒至3分鐘。螢幕會顯示餘
下時間。等待攪拌機自動停止。裝置會響3次。
• 抽真空﹕使用抽真空功能前，須轉動頂蓋，直至頂蓋的箭嘴
對準「抽真空」圖示 ，表示頂蓋已鎖緊。開始抽真空功
能。1分鐘10秒後可選擇所需自動程式（蔬果汁及奶昔程式
適用）。程式結束後，按頂蓋上的抽真空鍵，移除蓋帽，將杯蓋拆
出，然後倒入材料。
19
ZH
其他功能
• 按「Start/Stop」（開始/停止）鍵暫停程式。暫停時間最長5分
鐘，此後裝置會回到主畫面。
• 如按住「Start/Stop」（開始/停止）鍵3秒鐘，裝置會響3次，然後
進入「待機」模式。除「Start/Stop」（開始/停止）鍵外，所有其
他鍵燈會熄滅。
超負荷保護
• 本裝置設有超負荷保護，避免摩打因為負荷過重已受損。
• 如果本裝置在操作中突然停止，請進行以下操作﹕
–按「Start/Stop」（開始/停止）鍵關閉裝置，拔除插頭，並冷卻
約15至20分鐘。
–重新插上電源，繼續攪拌。
• 取消﹕裝置運作期間可按「Cancel」（取消）鍵停止。裝置會停止
並回到主畫面。
清潔
• 用完裝置立即清潔攪拌杯。
• 如要簡單清潔，可使用「清潔」程式﹕
–倒入水150毫升及一滴清潔液進攪拌杯。按「清潔」鍵。
• 過多洗潔精會產生大量泡沫，使攪拌杯滿瀉。清潔程式結束後，用
海綿加以清理。
• 用清水沖洗攪拌杯及杯蓋內部。
• 如裝置需加以徹底清潔，可利用混合梳打粉的暖水。先浸泡數小
時，可令清潔更容易。
• 用濕布清潔摩打組(D)。小心抺乾。
• 可拆出的部分（杯蓋、頂蓋、量杯）可用海綿加熱肥皂水清潔。攪
拌杯內側也可以用毛刷清洗。
注意﹕
• 確定攪拌杯內無任何殘留材料或汁液。攪拌杯不適宜用來在雪櫃或
冰格儲存食物。
• 摩打組及攪拌杯外側可以用濕布清潔。
• 請勿將本裝置浸在水裏（不論是摩打組或榨汁杯座）。切勿用水沖
洗摩打組（D）。
• 切勿用洗碗機清洗攪拌杯、頂蓋。
20
裝置不能運作時應該如何？
問題 原因 解決方法
裝置無法運作
未插電源
所使用電源的電壓，須與
本裝置功率牌上所指示的
一致。
攪拌杯並未正確裝在摩打
組上，或攪拌杯及杯蓋雖
然對位但未鎖好在摩打
組上。
檢查攪拌杯及杯蓋是否已
按說明所示正確裝在摩打
組上。
裝置、按鍵板或程式無
反應
拔除電源，等1分鐘再插
上。
如出現過熱
按「Start/Stop」（開始/
停止）鍵關閉裝置，拔除
插頭，並冷卻約15至20
分鐘。
滿瀉 減少所處理的材料。
裝置在操作中突然停止 超載或過熱
按「Start/Stop」（開始/
停止）鍵關閉裝置，拔除
插頭，並冷卻約15至20
分鐘。
重新插上電源，繼續攪拌。
震動過大
本產品所在的表面不平坦。 請將本裝置放在平坦表面。
材料太滿。 減少所處理的材料。
材料從杯蓋漏出或滿瀉
材料太滿。 減少所處理的材料。
杯蓋所放的位置不當 將杯蓋正確放在攪拌杯上。
材料從榨汁杯底漏出 裝置的防水性能減弱
注意﹕刀片並不能拆除。
請聯絡客戶服務部，聯絡
資料載於保用證上。
刀片轉動不順
食物塊太大或太硬。
減少所處理材料的大小或
分量。
已攪拌的液體太熱，令矽
膠圈變形。
請聯絡客戶服務部，聯絡
資料載於保用證上。
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/