Remove left and rearaxle caps as shown in the figure.
Rear
MXW004
MX002
Brass rearaxle cap assemble
x2
x2
15
Phillips Driver
1-S02006
Bind Screw M2x6
1-S02006
Bind Screw M2x6
Align 3 grooves.
Do the same as the other side.
Attention. Do not overtighten and do not
cross thread! Screw straight in until it stops,
then tighten another 15 degrees.
R
THE FINEST RADIO CONTROL MODELS
INSTRUCTION SHEET
No.MXW004
Weighs 25g per pair. Increases grip on high traction surfaces.
Descent performance can be enhanced by the additional weight on the rear.
Tools required
1
for MINI-Z 4x4 Series
Brass Rear Axle Cap (2pcs)
2
Before beginning assembly, please read these instructions thoroughly!
32512007-1 PRINTED IN JAPAN
243 -0021
046-229-4115
13001800
© Copyright 2020 KYOSHO CORPORATION /
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.kyosho.com