Bosch MUMX50GXCN ユーザーマニュアル

カテゴリー
フードプロセッサー
タイプ
ユーザーマニュアル

このマニュアルも適しています

使用产品前请仔细阅读本使用说明书并请妥善保管
立即注册您的新博世产品:
www.bosch-home.cn
切片切丝附件
MUZXL....CN
zh 使用说明书
en Instruction manual
zh 简体中文 3
en English 6
3
zh
安全须知
操作说明介绍了种型号另请参见型号概
(图 F
概述
翻开图示页。
A
1 带出口孔外壳
2 刀盘
3 切割刀盘
a 双面刀盘“Profi Supercut” –粗/细
b 面切丝刀盘 –粗/细
c 碎刀盘 – 中细
d 刀盘
4 带进料管的盖子
5 推料杆
B:工 作 位
C:预 置 过 载 保 护 易 断
内置置过载保护易断保护电器的驱
若发生附件会自
动断裂。但是驱动轴也可轻松更换。向客
服购买新的带驱动轴的刀盘支架。带有预置
过载保护易断点的部件不属于保修的范围。
此类部件可向客服购买(订购号091027)
安全须
本附件用于功能食物料理机MUM8.../MUMX..。按照功能食物料
使用说明书作。附件可用于碎食材切片切丝不得
将其用于加工其他物品或物质。若在制造商准许的使用范围内则附件
可用于其
电器安
W 有受
勿抓住切割刀利的刀或边只能通过缘抓住切割刀
在安装/卸下切片切丝附件之请等待驱动接口完全停止并拔下
插头。不要用手指触摸进料推料杆来添加更食材勿在驱
动接口尚未止时卸下/安装附件
W 重要信息!
只能指定的工置使用附件。附件才能使切勿
附件到底
感谢您购买新的 Bosch 电器。 您可以在我
更多于产
原产地:
洛文
商:
西 器( )有
中山路129号中南2021楼
全国统一客服务热线:
4008855888
客户服电子:
careline.china@bshg.com
公司网
www.bosch-home.cn
4
zh 操作
操作
W 有受伤危险!
抓住割刀盘的刀刃或边只能
通过边缘抓住切割刀盘。在安装/卸下切片
,请
下电源插头要用手指进料管请用推
料杆来添加更
告!
切片切丝附件必须完全组装好才能使用。
勿将切片切丝附件组装到底座装置上。
在指明的工作位操作切片切丝附件若未
使用MUM8.../MUMX..的原搅拌碗,
必须安装了工具驱动接口保护盖。
重要信息
使用说工作
用于带有7速转开关的电器
对于带有4档开关的电器,可在下表中
到参值:
7档: 1 2 3 4 5 6 7
4档: 1 2 3 4
用于部分型号:
专业 Supercut 双面刀盘/双面切片
刀盘 – 粗/细
片。
在5档下加工
片刀
“Grob”表示粗切
Fein”表
告!
专业Supercut双面刀盘/双切片刀盘不适
用于硬质奶酪、面包圆面包或克力切片
片。
双面切丝刀盘 – 粗/细
用于蔬菜、水果和奶酪切丝,但硬
奶酪除(如帕马森干酪
在5或7档下加工
面切刀盘示:
“2”表示丝面
4”表示细丝面
告!
双面切丝刀盘不适用于坚果切丝。奶酪
只能用粗丝面切丝在7档下)
磨碎刀盘 – 中细
磨碎生土豆硬质奶酪如帕马
森干酪克力和坚果。
在7档下加工
告!
片插入必须面朝上。磨碎不适用于
磨碎软质奶酪和奶酪片
合切丝附件使用
D
按释放按钮并将多功能臂移至位
置1
驱动接口保护盖盖未使用的驱
接口。
固定搅碗:
–拌碗前倾斜后将其放下
–针旋转直到入到位
按释放按钮并将多功能臂移至位
置3
切片切丝附件的驱动接口上取
下驱动接口保护盖(图 D- 5 a )。
握住刀盘支架下端保两个尖端面朝
上。
将切割刀盘小心地刀盘的尖
(图 D-6a)若是面刀盘,请确保将
用的一面朝上
抓住刀盘支架上端并将其插入外壳
(图D-6b)
安装盖注意标记)顺时针方向旋
转到底
片切丝件安放到驱动接口上然后
以顺时针方向旋转到底, D-8示。
上电
将旋转开关旋至建议的档位。
要加工的食材入进料管并用推料
向下推
告!
避免加工好的食材在出口孔处堆积
提示:为确保切碎均匀,请成串地材。
注:若要加工的材在切片切丝附件中卡住,
请关闭多功能食物料理机并拔下电源插头,
等驱动接口完全停止后切片切丝附件上取
下盖料管。
5
zh
使用电器后
使用电
关闭电
拔下电
下。
逆时针旋转盖子并将其卸下
带刀盘刀盘为此用手
从下(图 E
所有部见“清修”
洁和维
W 有受伤危
抓住割刀盘的刀刃或边只能
通过边缘抓住切割刀盘。
告!
勿使用磨蚀性洁剂否则可能会损坏表
面。
切片切丝附件的所有部件均可在洗碗机内
清洗。
提示:要去除加工胡萝卜等下的颜色,请用
,即
丝附件并非切割刀盘)上擦拭掉然后冲洗
件。
可选附件
若产品装内为随附某附件则可在
上或向客服买。
MUZ8PS1
薯条刀盘
用于豆切
告!
在驱动接完全停止前勿加满土豆。
将土料管
将开旋至5档。
多土
MUZ8RS1
碎刀盘,
用于磨碎豆,例如用于土
煎饼或汤团。
将土料管
将开旋至5档。
多土
MUZ8KP1
豆馅饼刀盘
磨碎生土豆以制作土豆饼和
土豆馅饼用于将水果和蔬菜切成薄片
告!
在使用时请确保要用的一面(磨碎/切
朝上。
料管中。
将旋钮设至5或7档
用推料杆将要加工的食材向下推。
MUZ8AG1
刀盘
水果和蔬菜切成亚洲蔬菜菜式
中要用
告!
片插入时必须面朝上。在驱动接口完全停
止之前,勿加满要加工的食材。
料管中。
将开旋至4档。
用推料杆将要加工的食材向下推。
MUZ8KS1
碎刀盘,
酪(
)。
告!
,请
酪。
要加工的硬奶酪放入进料管
将开旋至4档。
用推向下推
留资料随时更改的权利。
6
en For your safety
Congratulations on the purchase of
your new Bosch appliance.You can nd
further information about our products
on our web page.
Country of origin:
Slovenia
Exclusive distributor:
BSH Home Appliances (China) Co., Ltd.
20/F,21/F, CN International Mansion,
129 Zhongshan Road, Nanjing,
Jiangsu Province, PRC.
Careline:
4008855888
Service E-mail:
Company website:
www.bosch-home.cn
For your safety
This accessory is designed for the food processor MUM8... /
MUMXL... Follow the operating instructions for the food processor.
This accessory is suitable for cutting and shredding food. It must not
be used for processing other objects or substances. Other applica-
tions are possible if the accessories approved by the manufacturer
are used.
Safety instructions for this appliance
W Risk of injury
Do not grip the sharp blades or edges of the cutting discs. Take
hold of cutting discs by the edge only. Before attaching / removing
the continuous-feed shredder, wait until the drive has come to a
standstill and pull out the mains plug. Keep ngers clear of the lling
shaft, add more ingredients with the pusher. Do not remove / attach
accessories until the drive has stopped.
W Important!
Use the accessories in the indicated operating position only. The
accessories must be completely assembled before use. Never
assemble accessories on the base unit.
The operating instructions describe several
models, see also overview of models
(Fig. F).
Overview
Please fold out the illustrated pages.
Figure A:
1 Housing with outlet opening
2 Disc holder
3 Cutting discs
a Reversible disc “Pro Supercut”
coarse / ne
b Reversible shredding disc
coarse / ne
c Grating disc
medium-ne
d Asiatic vegetables disc
4 Cover with lling shaft
5 Pusher
Figure B: Operating position
Figure C: Predetermined breaking point
7
en
Operation
The built-in predetermined breaking point
protects the drive of the appliance. If an
overload occurs, the drive shaft of the
continuous-feed shredder breaks. However,
the drive shaft can easily be replaced. A
new disc holder with drive shaft is available
from customer service. Spare parts with
a predetermined breaking point are not
a component of our warranty obligations.
Such spare parts can be purchased from
customer service (order no. 091027).
Operation
W Risk of injury!
Do not grip the sharp blades or edges of the
cutting discs. Take hold of cutting discs by
the edge only. Before attaching / removing
the continuous-feed shredder, wait until the
drive has come to a standstill and pull out
the mains plug. Keep ngers clear of the
lling shaft, add more ingredients with the
pusher.
Warning!
The continuous-feed shredder must be
completely assembled before use. Never
assemble the continuous-feed shredder on
the base unit. Operate the continuous-feed
shredder in the indicated operating position
only. If you are not working with the original
bowl of the MUM8... / MUMXL.., the tool
drive cover must be attached.
Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch.
For appliances with a 4-step rotary switch
the guide values can be found in the
following table:
7 settings: 1 2 3 4 5 6 7
4 settings: 1 2 3 4
For some models:
Professional Supercut reversible
disc / reversible slicing disc –
coarse / ne
for slicing fruit and vegetables.
Process at setting 5.
Designation on the reversible slicing disc:
“Grob” for the coarse cutting side
“Fein” for the ne cutting side
Warning!
The professional Supercut reversible disc /
reversible slicing disc is not suitable for
slicing hard cheese, bread, bread rolls or
chocolate. Slice boiled, waxy potatoes only
when they are cold.
Shredding reversible disc –
coarse / ne
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Process at setting 5 or 7.
Designation on the reversible shredding
disc:
“2” for the coarse shredding side
“4” for the ne shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only (at setting 7).
Grating disc – medium-ne
for grating raw potatoes, hard
cheese (e.g. Parmesan), cooled chocolate
and nuts.
Process at setting 7.
Warning!
The inserted blades must be face up. The
grating disc is not suitable for grating soft
cheese and cheese slices.
Working with the continuous-feed
shredder
Figure D:
Press release button and move
multi-function arm to position 1.
Cover unused drives with drive
covers.
8
en After using the appliance
Insert the bowl:
Tilt the bowl forwards and then set it
down.
Turn anti-clockwise until it locks into
place.
Press release button and move
multi-function arm to position 3.
Remove drive cover from the
drive of the continuous-feed shredder
(Fig. D-5a).
Hold disc holder at the lower end,
ensuring that the two tips are face up.
Carefully place the cutting disc onto the
tips of the disc holder (Fig. D-6a). In the
case of reversible discs, ensure that the
required side is face up.
Grip disc holder at the upper end and
insert into the housing (Fig. D-6b).
Attach the cover (note mark) and turn all
the way in a clockwise direction.
Place continuous-feed shredder on
the drive and rotate all the way in a
clockwise direction, as illustrated in
Figure D-8.
Insert the mains plug.
Turn rotary switch to recommended
setting.
Put food to be processed in the feed
tube and push down with the pusher.
Warning!
Prevent the cut ingredients from building up
in the outlet opening.
Tip: To ensure even cutting results, process
thin ingredients in bunches.
Note: If the food to be processed sticks in
the continuous-feed shredder, switch food
processor off, pull out mains plug, wait until
the drive comes to a standstill, remove
cover from the continuous-feed shredder
and empty feed tube.
After using the appliance
Switch off the appliance with the rotary
switch.
Remove mains plug.
Rotate the continuous-feed shredder in
an anti-clockwise direction and remove.
Rotate the lid in an anti-clockwise
direction and remove.
Remove disc holder with disc. To do
this, press nger from below against the
drive shaft (Fig. E).
Clean all parts, see “Cleaning and
servicing”.
Cleaning and servicing
W Risk of injury
Do not grip the sharp blades or edges of the
cutting discs. Take hold of cutting discs by
the edge only.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
All parts of the continuous-feed shredder
are dishwasher-proof.
Tip: To remove the red lm after processing
e.g. carrots, pour a little cooking oil
on a cloth and rub the lm off the
continuous-feed shredder (not the cutting
discs). Then rinse the continuous-feed
shredder.
9
en
Optional accessories
Optional accessories
If an accessory is not included in the
product package, it can be purchased via
the trade or from customer service.
MUZ8PS1
Chipper disc
For slicing raw potatoes for
chips.
Warning!
Do not top up potatoes until the drive is at a
standstill.
Place potatoes in the lling shaft.
Turn switch to 5.
Add more potatoes with the pusher.
MUZ8RS1
Grating disc, coarse
For grating raw potatoes, e.g.
for potato pancakes or dumplings.
Place potatoes in the lling shaft.
Turn switch to 5.
Add more potatoes with the pusher.
MUZ8KP1
Potato fritter disc
For grating raw potatoes for
rostis and potato fritters, for cutting fruit and
vegetables into thick slices.
Warning!
When using, ensure that the required side
(grating / slicing) is face up.
Place the food to be processed in the
lling shaft.
Set rotary knob to setting 5 or 7.
Push down food to be processed with
the pusher.
MUZ8AG1
Asiatic vegetables disc
Slices fruit and vegetables into
ne strips for Asian vegetable dishes.
Warning!
The inserted blades must be face up. Do
not top up food to be processed until the
drive is at a standstill.
Place the food to be processed in the
lling shaft.
Turn switch to 4.
Push down food to be processed with
the pusher.
MUZ8KS1
Grating disc, ne
for grating hard cheese
(e.g. Parmesan).
Warning!
Do not top up hard cheese until the drive is
at a standstill.
Place the hard cheese to be processed
in the lling shaft.
Turn switch to 4.
Push down hard cheese with the
pusher.
Changes reserved.
Robert Bosch Hausgeräte GmbH
Carl-Wery-Stre 34
81739 München, GERMANY
www.bosch-home.com
8001018587
*8001018587*
950817
MUZXL....CN
1 / 1

Bosch MUMX50GXCN ユーザーマニュアル

カテゴリー
フードプロセッサー
タイプ
ユーザーマニュアル
このマニュアルも適しています

他の言語で