1413578-T2
Record your model number:
记录您的型号:
:
WARNING: Risk of scalding. High water temperature can cause severe
burns. Set the valve water temperature at or below 120°F (49°C). Refer
to the temperature adjustment instructions for the valve.
Follow all local plumbing and building codes.
1A. Sealant Tape
2A. Maximum distance to the nished wall surface.
2B. Minimum distance to the nished wall surface.
3A. Create space in the wall for the valve and piping.
4A. Connect the water supplies.
5A. To invert the hot and cold supply lines, swap the cartridges.
6A. Connect the piping for the shower ings. Connect only to the top or
boom port for each valve.
8A. Check all connections for leaks.
9A. Complete the nished wall.
Need help? Contact our Customer Care Center.
• Australia: 1800 KOHLER (1800-564-537)
• New Zealand: 0800-564-537
• Mainland China: +(86) 800-820-2628, +(86) 400-820-2628
• Hong Kong (China), Macau (China), Taiwan (China): +(852) 3125-7728
• Brunei, Guam, Indonesia, Japan, Malaysia, Mongolia, Philippines,
Singapore, South Korea, Vietnam: +(86) 21-2606-2572
This product is covered under the Five-Year Limited Warranty for
KOHLER® Faucets, found in the packed Compliance Certication.
警告: 提防烫伤风险。水温过高会导致严重灼伤 。应将阀芯水温设置为
1
2
3
4
5
6
等于或低于 120°F (49°C)。请参考阀芯的温度调节说明。
遵守所有当地给排水及建筑规定。
1A. 密封胶带
2A. 到成品墙面的最大距离。
2B. 到成品墙面的最小距离。
1 Kohler Co.
1413578-T2-B