Tohnichi NTD 取扱説明書

ブランド
Tohnichi
モデル
NTD
タイプ
取扱説明書

このマニュアルも適しています

To the use r
In order to use the torque driver properly
and safely,please read the instructions
before operation.If there are any
questions,please contact a Tohnichi
authorized distributor or Tohnichi sales
office. Keep these Operating Instructions
for future use.
RNTD Model
NTD Model
OPERATING INSTRUCTION
8
Unit of torque and conversion value
10 Option
TORQUE ADJUSTING BAR
1Perform regular inspection for
function and accuracy.
9Daily Check and Maintenance
2Stop operation immediately if there
is any sign of abnormality.Refer all
servicing to your Tohnichi dealer.
3Since professional repair is
required,contact your Tohnichi
dealer for repair service.Do not
attempt to repair the Torque Driver
yourself.
4When storing the Torque Driver for
a long time,keep in a dry place.
LTD AUXILIARY TIGHTENINIG TOOL
RESINE GRIP FOR TORQUE DRIVER
TORQUE DRIVER TESTER TDT3-G
Calibration for Torque Driver.
Loading device eliminates meas-
urement errors.
Operator can visibly check the
judgment result with white/
red/blue display by judgment
function.
0120-169-121
5 6
1Used for mass production and
maintenance services.
2Do not set the torque driver beyond
the maximum torque setting.
This will cause damage of injury.
3
Check for cracks,scratches and rust.
These will cause damage to the driver
and may result in an injury.If such
conditions exist,have a functional test
performed and repair if necessary.
1Application
6Do not use the torque driver where
there are high levels of dirt or dust.
1Toggle type torque detection
mechanism ensures accuracy and
long durability. When you feel a
click, tightenning is completed.
Suitable for single purpose tightening.
2Features
01Application
02Features
03Warnings
04Specifications
05Operating Procedure
06Precautions when Handling
07Operating Procedure
08Unit of torque and conversion value
09Daily Check and Maintenance
10 Option
Contents
1Make sure there is no oil or grease
on the grip.A slip of the hand while
tightening,may cause an accident
or injury.
3Warnings
4Do not drop the torque driver or apply
a strong shock or jolt.This will cause
damage or deformation as well as
decrease the accuracy and durability,
which may cause an accident or injury.
5Do not use the torque driver in the
rain,high temperature or high
humidity,this may result in
malfunction due to the rust.
R
1Torque Setting
Hold the grip of the Driver in your
hand,insert Adjusting Bar into
the slit of Adjusting Screw and
turn Adjusting Bar. When turning
Adjusting Screw clockwise, torque
will increase.
Use TDT3-G torque driver tester to
set the desired torque. (Adjusting
Bar is optional accessory.)
5Operating Procedure
2Insert the bit into the adapter of
the Driver. (Select the required bit
from the table for bits.)
3Insert the tip of the bit into slit of
screw head.
4Turn the Torque Driver clockwise to
tighten.
5Tightening is completed when a
click is felt.
RNTD model is rotary slip clutch
type.
NTD:When reaching the set
torque, the break is felt by hand in
15 degrees.
Stop and complete the tightening
work within the 15 degrees.
1Applying more torque beyond the
click will lead to over-torquing.
(NTD model)
6Precautions when Handling
2Since RNTD model is rotary slip
clutch type mechanism,over-
torquing is eliminated.
But,idle extra clicks will result in
clutch engagement wearing and
may shorten durability.
3Select a proper bit to adapt to the
slit of the screw head.If the size of
bit is not correct,the screw head
may be damaged by the bit.
1When inserting the bit,push the bit
until the ball in Coupler stays in
the center of the bit groove.
Use a plier to pull out,when the bit
is tight.
7Operating Procedure
4Specifications
1 2 3 4
1Used for mass production and
maintenance services.
2Do not set the torque driver beyond
the maximum torque setting.
This will cause damage of injury.
3
Check for cracks,scratches and rust.
These will cause damage to the driver
and may result in an injury.If such
conditions exist,have a functional test
performed and repair if necessary.
1Application
6Do not use the torque driver where
there are high levels of dirt or dust.
1Toggle type torque detection
mechanism ensures accuracy and
long durability. When you feel a
click, tightenning is completed.
Suitable for single purpose tightening.
2Features
01Application
02Features
03Warnings
04Specifications
05Operating Procedure
06Precautions when Handling
07Operating Procedure
08Unit of torque and conversion value
09Daily Check and Maintenance
10 Option
Contents
1Make sure there is no oil or grease
on the grip.A slip of the hand while
tightening,may cause an accident
or injury.
3Warnings
4Do not drop the torque driver or apply
a strong shock or jolt.This will cause
damage or deformation as well as
decrease the accuracy and durability,
which may cause an accident or injury.
5Do not use the torque driver in the
rain,high temperature or high
humidity,this may result in
malfunction due to the rust.
R
1Torque Setting
Hold the grip of the Driver in your
hand,insert Adjusting Bar into
the slit of Adjusting Screw and
turn Adjusting Bar. When turning
Adjusting Screw clockwise, torque
will increase.
Use TDT3-G torque driver tester to
set the desired torque. (Adjusting
Bar is optional accessory.)
5Operating Procedure
2Insert the bit into the adapter of
the Driver. (Select the required bit
from the table for bits.)
3Insert the tip of the bit into slit of
screw head.
4Turn the Torque Driver clockwise to
tighten.
5Tightening is completed when a
click is felt.
RNTD model is rotary slip clutch
type.
NTD:When reaching the set
torque, the break is felt by hand in
15 degrees.
Stop and complete the tightening
work within the 15 degrees.
1Applying more torque beyond the
click will lead to over-torquing.
(NTD model)
6Precautions when Handling
2Since RNTD model is rotary slip
clutch type mechanism,over-
torquing is eliminated.
But,idle extra clicks will result in
clutch engagement wearing and
may shorten durability.
3Select a proper bit to adapt to the
slit of the screw head.If the size of
bit is not correct,the screw head
may be damaged by the bit.
1When inserting the bit,push the bit
until the ball in Coupler stays in
the center of the bit groove.
Use a plier to pull out,when the bit
is tight.
7Operating Procedure
4Specifications
1 2 3 4
1Used for mass production and
maintenance services.
2Do not set the torque driver beyond
the maximum torque setting.
This will cause damage of injury.
3
Check for cracks,scratches and rust.
These will cause damage to the driver
and may result in an injury.If such
conditions exist,have a functional test
performed and repair if necessary.
1Application
6Do not use the torque driver where
there are high levels of dirt or dust.
1Toggle type torque detection
mechanism ensures accuracy and
long durability. When you feel a
click, tightenning is completed.
Suitable for single purpose tightening.
2Features
01Application
02Features
03Warnings
04Specifications
05Operating Procedure
06Precautions when Handling
07Operating Procedure
08Unit of torque and conversion value
09Daily Check and Maintenance
10 Option
Contents
1Make sure there is no oil or grease
on the grip.A slip of the hand while
tightening,may cause an accident
or injury.
3Warnings
4Do not drop the torque driver or apply
a strong shock or jolt.This will cause
damage or deformation as well as
decrease the accuracy and durability,
which may cause an accident or injury.
5Do not use the torque driver in the
rain,high temperature or high
humidity,this may result in
malfunction due to the rust.
R
1Torque Setting
Hold the grip of the Driver in your
hand,insert Adjusting Bar into
the slit of Adjusting Screw and
turn Adjusting Bar. When turning
Adjusting Screw clockwise, torque
will increase.
Use TDT3-G torque driver tester to
set the desired torque. (Adjusting
Bar is optional accessory.)
5Operating Procedure
2Insert the bit into the adapter of
the Driver. (Select the required bit
from the table for bits.)
3Insert the tip of the bit into slit of
screw head.
4Turn the Torque Driver clockwise to
tighten.
5Tightening is completed when a
click is felt.
RNTD model is rotary slip clutch
type.
NTD:When reaching the set
torque, the break is felt by hand in
15 degrees.
Stop and complete the tightening
work within the 15 degrees.
1Applying more torque beyond the
click will lead to over-torquing.
(NTD model)
6Precautions when Handling
2Since RNTD model is rotary slip
clutch type mechanism,over-
torquing is eliminated.
But,idle extra clicks will result in
clutch engagement wearing and
may shorten durability.
3Select a proper bit to adapt to the
slit of the screw head.If the size of
bit is not correct,the screw head
may be damaged by the bit.
1When inserting the bit,push the bit
until the ball in Coupler stays in
the center of the bit groove.
Use a plier to pull out,when the bit
is tight.
7Operating Procedure
4Specifications
1 2 3 4
1Used for mass production and
maintenance services.
2Do not set the torque driver beyond
the maximum torque setting.
This will cause damage of injury.
3
Check for cracks,scratches and rust.
These will cause damage to the driver
and may result in an injury.If such
conditions exist,have a functional test
performed and repair if necessary.
1Application
6Do not use the torque driver where
there are high levels of dirt or dust.
1Toggle type torque detection
mechanism ensures accuracy and
long durability. When you feel a
click, tightenning is completed.
Suitable for single purpose tightening.
2Features
01Application
02Features
03Warnings
04Specifications
05Operating Procedure
06Precautions when Handling
07Operating Procedure
08Unit of torque and conversion value
09Daily Check and Maintenance
10 Option
Contents
1Make sure there is no oil or grease
on the grip.A slip of the hand while
tightening,may cause an accident
or injury.
3Warnings
4Do not drop the torque driver or apply
a strong shock or jolt.This will cause
damage or deformation as well as
decrease the accuracy and durability,
which may cause an accident or injury.
5Do not use the torque driver in the
rain,high temperature or high
humidity,this may result in
malfunction due to the rust.
R
1Torque Setting
Hold the grip of the Driver in your
hand,insert Adjusting Bar into
the slit of Adjusting Screw and
turn Adjusting Bar. When turning
Adjusting Screw clockwise, torque
will increase.
Use TDT3-G torque driver tester to
set the desired torque. (Adjusting
Bar is optional accessory.)
5Operating Procedure
2Insert the bit into the adapter of
the Driver. (Select the required bit
from the table for bits.)
3Insert the tip of the bit into slit of
screw head.
4Turn the Torque Driver clockwise to
tighten.
5Tightening is completed when a
click is felt.
RNTD model is rotary slip clutch
type.
NTD:When reaching the set
torque, the break is felt by hand in
15 degrees.
Stop and complete the tightening
work within the 15 degrees.
1Applying more torque beyond the
click will lead to over-torquing.
(NTD model)
6Precautions when Handling
2Since RNTD model is rotary slip
clutch type mechanism,over-
torquing is eliminated.
But,idle extra clicks will result in
clutch engagement wearing and
may shorten durability.
3Select a proper bit to adapt to the
slit of the screw head.If the size of
bit is not correct,the screw head
may be damaged by the bit.
1When inserting the bit,push the bit
until the ball in Coupler stays in
the center of the bit groove.
Use a plier to pull out,when the bit
is tight.
7Operating Procedure
4Specifications
1 2 3 4
To the use r
In order to use the torque driver properly
and safely,please read the instructions
before operation.If there are any
questions,please contact a Tohnichi
authorized distributor or Tohnichi sales
office. Keep these Operating Instructions
for future use.
RNTD Model
NTD Model
OPERATING INSTRUCTION
8
Unit of torque and conversion value
10 Option
TORQUE ADJUSTING BAR
1Perform regular inspection for
function and accuracy.
9Daily Check and Maintenance
2Stop operation immediately if there
is any sign of abnormality.Refer all
servicing to your Tohnichi dealer.
3Since professional repair is
required,contact your Tohnichi
dealer for repair service.Do not
attempt to repair the Torque Driver
yourself.
4When storing the Torque Driver for
a long time,keep in a dry place.
LTD AUXILIARY TIGHTENINIG TOOL
RESINE GRIP FOR TORQUE DRIVER
TORQUE DRIVER TESTER TDT3-G
Calibration for Torque Driver.
Loading device eliminates meas-
urement errors.
Operator can visibly check the
judgment result with white/
red/blue display by judgment
function.
0120-169-121
5 6
To the use r
In order to use the torque driver properly
and safely,please read the instructions
before operation.If there are any
questions,please contact a Tohnichi
authorized distributor or Tohnichi sales
office. Keep these Operating Instructions
for future use.
RNTD Model
NTD Model
OPERATING INSTRUCTION
8
Unit of torque and conversion value
10 Option
TORQUE ADJUSTING BAR
1Perform regular inspection for
function and accuracy.
9Daily Check and Maintenance
2Stop operation immediately if there
is any sign of abnormality.Refer all
servicing to your Tohnichi dealer.
3Since professional repair is
required,contact your Tohnichi
dealer for repair service.Do not
attempt to repair the Torque Driver
yourself.
4When storing the Torque Driver for
a long time,keep in a dry place.
LTD AUXILIARY TIGHTENINIG TOOL
RESINE GRIP FOR TORQUE DRIVER
TORQUE DRIVER TESTER TDT3-G
Calibration for Torque Driver.
Loading device eliminates meas-
urement errors.
Operator can visibly check the
judgment result with white/
red/blue display by judgment
function.
0120-169-121
5 6
To the use r
In order to use the torque driver properly
and safely,please read the instructions
before operation.If there are any
questions,please contact a Tohnichi
authorized distributor or Tohnichi sales
office. Keep these Operating Instructions
for future use.
RNTD Model
NTD Model
OPERATING INSTRUCTION
8
Unit of torque and conversion value
10 Option
TORQUE ADJUSTING BAR
1Perform regular inspection for
function and accuracy.
9Daily Check and Maintenance
2Stop operation immediately if there
is any sign of abnormality.Refer all
servicing to your Tohnichi dealer.
3Since professional repair is
required,contact your Tohnichi
dealer for repair service.Do not
attempt to repair the Torque Driver
yourself.
4When storing the Torque Driver for
a long time,keep in a dry place.
LTD AUXILIARY TIGHTENINIG TOOL
RESINE GRIP FOR TORQUE DRIVER
TORQUE DRIVER TESTER TDT3-G
Calibration for Torque Driver.
Loading device eliminates meas-
urement errors.
Operator can visibly check the
judgment result with white/
red/blue display by judgment
function.
0120-169-121
5 6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Tohnichi NTD 取扱説明書

ブランド
Tohnichi
モデル
NTD
タイプ
取扱説明書
このマニュアルも適しています
PDFをダウンロードします
報告

他の言語で

関連論文

その他のドキュメント