产品规格书
SPECIFICATION
ES-RND080C 系列工矿灯电源
UFO Highbay Driver
机型名称 Model No：ES-RND080C 系列LED驱动电源
概述 Description：80W 工矿灯电源 80W UFO Highbay Driver
版本 Version：V02
发行日期 Released On：2023-05-18
ES-RND080 0-10V调光系列为80W圆形非隔离恒流驱动产品，此系列产品针对LED照明设计，主要应用领域为工矿照明。
超高的效率，良好的散热结构，极大提高了产品的可靠性，且具有短路/过温/过压保护功能，使驱动电源产品寿命大大提高
ES-RND080 0-10V Dimming series, is a 80W round non-isolated power driver with constant current. The
series is specially designed for LED industrial lighting, supplies with high eciency, appropriate heat radia-
tion design and all-around protection of OTP, OVP and SCP, highly improved its reliability and lifespan.
产品描述
◆ High Eciency(Up to 94%)
◆ Two Stage Design, Flicker-Free
◆ With Active PFC For High PF/ Low THD
◆ Isolated dimming:0-10V PWM,Resistor
◆ With Auxilia Power for 12V/200mA
◆ Surge Protection: L-N:4KV, L/N-PE:6KV
◆ All-Around Protection:OTP, OVP, SCP
◆ Five-year warranty
产品特性
ES-RND080C 80W 工矿灯电源 80W UFO Highbay Driver 80W LED High Bay Driver
Features
Description
型号编码 Description
◆ 超 高 功 率 密 度 ，效 率 高 达 9 4 %
◆ 双 级 架 构 ，无 频 闪
◆ 内置有源PFC,实现高PF/低THD
◆ 隔离调光：0-10V PWM 电阻
◆ 辅助电源功能：12V/200mA
◆ 雷击保护：L-N(差模）：4KV L/N-PE(共模）：6KV
◆ 全 方 位 保 护 ：过 温 / 过 压 / 短 路
◆ 五年质保
ES-RND080C＊-0400＊
＊
A √
√
√
B
D
√
√ √
调功率 调色温 感应器底座 ＊
A √
B
BX
√
√ √
非调光 0-10V三合一调光 12V辅助源
Wattage Adjusting CCT Tuning Receptacle for Sensor Non-Dimming 0-10V 3-in-1 Dimming With Auxiliary Output
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
空载最高输出电压
Output voltage
350Vdc Max（@no load）
180-260Vdc
输出电流可调范围 (AOC)
Output current adjustable range 0.25-0.4A
额定输出电流
Rated Output current (0.28A@260V;0.4A@200V)
额定输出电压
Rated Output voltage 180V Min ,260V Max (Po=Vo*Io=80W,full load)
满功率输出电压范围
Full power output voltage 200-260Vdc
效 率（ T y p . ）
E c i e n c y（ T y p . ） 92%@120Vac/94%@230Vac/94%@277Vac,full load@260Vdc
输入功率
Input power Max 90W,@25℃,120Vac 260Vac
输入电流
Input current 1.1Arms Max
额定：100-277Vac 极限：90-305Vac（参照降额曲线）
Rated：100-277Vac Extreme：90-305Vac（Refer to the reduction cue）
输入电压范围
Input voltage range
频率范围
Frequency range 47-63Hz
浪涌电流
Inrush current（Typ.） 100A @230Vac, Ta=25℃, 冷启动 cold sta
漏电流
Leakage current <0.75mA @ 277Vac
过压保护
Over voltage protection
打 嗝 模 式 ，过 压 状 态 移 除 可 自 恢 复
Hiccup mode, recovers automatically after
voltage fault condition is removed
短路保护
Sho circuit protection
打 嗝 模 式 ，负 载 异 常 移 除 后 可 自 恢 复
Hiccup mode, recovers automatically after
load fault condition is removed
过温保护
Over temperature
功率降额，温度下降后恢复满载
Power derating, recovers automatically
after fault condition is removed
总谐波失真
Total harmonic distoion
THD≤10%,@230Vac,full load; 具体请参考：总谐波失真曲线
THD≤10%,@230Vac,full load;
Please refer to: total harmonic distoion waveform
功率因素（Typ.）
Frequency range PF≥0.98@120Vac, PF≥0.95@230Vac, PF≥0.9@277Vac,@full load,47-63Hz；
Other load conditions, please refer to power factor cue
低频纹波电流（低于 120HZ）
Output LF current ripple(<120Hz) at full load <5%
PF≥0.98@120Vac, PF≥0.95@230Vac, PF≥0.9@277Vac，
@满负荷，47-63Hz;其他负载情况，参考功率因数曲线
性能参数 Peormance Parameters
输出
Output
输入
Input
保护
Protection
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
调光概述 Dimming General Specications
参数 Parameters
0-10V 调光线电压范围
0-10V Dimming wire voltage range
0-10V 调光线电流范围
0-10V Dimming wire current range
推荐调光输入范围
Dimming wire range recommendation
最小值 Min
0V
100uA
0V -
+12V
300uA
10V
-
-
500Hz
TBD
0V
-
PWM 高电平 PWM high level -
PWM 低电平 PWM low level
10V
10V
255uA
-TBD
-
PWM 频率范围
PWM frequency range 3KHz
10% -
PWM 占空比 PWM propoion 100%
电阻范围 Resistance range
典型值 Typical Value 最大值 Max 备注 Remarks
环境温度
Environmental temperature
Ta：-40~55℃，具体请参考负载与温度曲线
Ta：-40~55℃，please refer to load VS temperature cue
工作壳温 Ambient temp T c ：- 4 0 ~ 9 0 ℃
工作湿度 Working humidity 10～95% RH，无冷凝 no condensation
储存温度和湿度
Storage temp. and humidity -40～+85℃, 5～95% RH
振动保护 Vibration protection 沿着 X, Y, Z 轴 10 ~ 500 hz, 5 g 12 分钟/周期，循环 72 分钟。
10～500Hz, 5G 12min./cycle, period for 72min. Each along X, Y, Z axes
安规标准 Safety standard IEC/EN61347-1(GB19510-1-2009), IEC/EN61347-2-13(GB 19510.14-2009),
UL8750, CSA C22.2 NO. 250.13-12；IP65 approved
耐电压 Withstand voltage
Input-Aux:3KVac,Output-Aux:3KVac, Input-PE:1.5KVac,
Output-PE:1.5KVac
绝缘电阻 Insulated resistance I/P-PE,O/P-PE>100M Ohm/500VDC/25℃/70%RH
MTBF ≥200Khrs，MIL-HDBK-217F(25℃)
重量/尺寸 Weight/Size 0.78Kg/详见机械数据 0.78Kg/See mechanical data for details
谐波电流 Harmonic current
EMI
环境保护
Environmental protection 干燥、潮湿或下雨场所，IP65 UL D, Damp or Wet Location, IP65
EN55015 , FCC PART15-CLASSB
EN61000-3-2 Class C
雷击保护 Surge protection L/N-PE:6KV,L-N:4KV
EMS EN61000-4-2,3,4,5,6,8,11; EN61547 Indust standard
环境温度
Environment
其他
Others
安规和
电磁兼容
Safety &
EMC
壳体颜色 Case color 黑色 Black
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
接线图 Wiring diagram
电气框图 Electrical block diagram
黑色/Black L 红色/Red VO+
黑白色/Black White Aux
紫色/Purple DIM+
粉色/Pink DIM-
LED 模组 Module
AUX Load
0-10V Dimmer
R
10V PWM
LED Driver
白色/White N
黑色/Black VO-
白色/White VO-
绿色/Green PE
Ｌ
Ｎ
FG
EMI lter &
Inrush CKT APFC Non- isolated
power stage
VO+
VO-
OTP
OVP
SCP
Aux 12V
DIM+
DIM-
备注（参考线材）Remarks（Refer to the wire）：
CE/CB/SAA/CCC 版本为 L/棕色，N/蓝色，G/黄绿，V+/棕色，V-/蓝色，Aux 12V 黑白色，DIM+/紫色，DIM-/粉色；
UL 版本为 L/黑色，N/白色，G/绿色，V+/红色，V-/黑色，V-/白色，Aux 12V/黑白色，DIM+/紫色，DIM-/粉色。
CE/CB/SAA/CCC version: L/brown ，N/blue，G/yellow-green，V+/brown,V-/blue，Aux 12V/Black white，DIM+/purple，DIM-/Pink；
UL version: L/black，N/white，G/green，V+/red，V-/black，V-/White，Aux 12V/Black white，DIM+/purple，DIM-/Pink.
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
机械尺寸图 Mechanical size 电源机构图
单位 Unit:mm
Ta: 环境温度测试点
Ambient temperature measured point
Tc:外壳温度测试点
Max case temperature Case temperature point
电源机构图
A
B
Y
X
E
Mounting Screw Diameter
House Diameter
TC Point Position
TC Point Position
Mounting Size
Ø7（0.27）
129（5.07）
CRing Fixed Hold M4*0.7
DHold Hole(Depth) 18（0.7）
20（0.15）
20（0.15）
113（4.44）
Standard Code mm(In.)Name Description
输出线
Output wire
E
A
C
D
B
输入线
Input wire X
Ｙ
TC
调功率
调电流 调色温
Wattage Adjusting
Current Ajustable CCT Tuning
Ta
45°
150
300±20
SJTW 18AWGX3C
L
N
PE
200±20
48
138
60.3
SVT 18AWGX3C
V-
V2-
V+
输出电压与输出电流(Dim/AOC 窗口) Output Voltage Vs. Output Current (Dim/AOC Window)
输出电压与效率(Vin=120Vac) Eciency Vs. Output Voltage (Vin=120Vac)
效率与输出电压(Vin=230Vac) Eciency Vs. Output Voltage (Vin=230Vac)
0
270V
260V
250V
240V
230V
220V
210V
200V
190V
180V
170V
Output Current (mA)
Dimming Windows AOC Windows
Output Voltage (V)
100 200 300 400 500 600 700 800 900 1000 1100
Eciency Vs. Output Voltage (Vin=120Vac)
Output Voltage (V)
170
88.00%
89.00%
90.00%
91.00%
92.00%
93.00%
94.00%
95.00%
96.00%
97.00%
98.00%
180 190 200 210 220 230 240 250 260 270
Io=280mA
Output Voltage (V) Io=280mA
Eciency(%)
Eciency(%)
Eciency Vs. Output Voltage (Vin=230Vac)
170
88.00%
89.00%
90.00%
91.00%
92.00%
93.00%
94.00%
95.00%
96.00%
97.00%
98.00%
180 190 200 210 220 230 240 250 260 270
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
功率因数与输出功率 Power Factor Vs. Output Power
总谐波失真(THD)与输出功率 Total harmonic distoion (THD) Vs. Output Power
效率与输出电压(Vin=277Vac) Eciency Vs. Output Voltage (Vin=277Vac)
Output Voltage (V) Io=280mA
Eciency(%)
Eciency(%)
Eciency Vs. Output Voltage (Vin=277Vac)
170
88.00%
89.00%
90.00%
91.00%
92.00%
93.00%
94.00%
95.00%
96.00%
97.00%
98.00%
180 190 200 210 220 230 240 250 260 270
Power Factor Vs. Output Power
Output Power(%)
60
0.860
0.880
0.900
0.920
0.940
0.960
0.980
1.000
2.00%
4.00%
6.00%
8.00%
10.00%
12.00%
14.00%
16.00%
65 70 75 80 85 90 95 100
60 65 70 75 80 85 90 95 100
Vin=120Vac Vin=230Vac Vin=277Vac
THD Vs. Output Power
Output Power(%)
THD (%)
Vin=120Vac Vin=230Vac Vin=277Vac
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
负载与 Ta（环温）的降额曲线 Derating waveform of Load VS Ta
备注：
1. 输入电压低于 100Vac 时需降额，输入电压为 90Vac 时需降额至 80%负载;
2. 负载与环境温度的降额曲线，环境温度是指电源周围的温度。
Notes：
1. Derating is required when the input voltage is lower than 100Vac, and derating to 80%Load when input voltage is 90Vac;
2. The derating cue of the load and the ambient temperature, ambient temperature means the temperature around the power supply.
功率降额曲线 Power derating waveform
80
40%
60%
80%
100%
120%
100 120 140 160 180 100 200 240 260 280 305
Load-Vin(V)
Load
-40
0%
20%
40%
60%
80%
100%
120%
-35 -30 -25 -20 -15 -10 -5 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
120V
230V
277V
Ta
Load
Load-Ta
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
寿命曲线 (120VAC/230VAC 输入/Full load) Lifetime waveform (120VAC/230VAC input/Full load)
调光 Dimming
注：由于存在不同的输入电压范围、不同的应用环境、不同的外部散热设
计等不定性因素，会导致外壳温升有一 定的差异。在以上任何应用条件
中，必须满足驱动器外壳温度（Tc）小于 90℃，此降额曲线方可成立。若
客户对 实际应用环境存有疑问，请及时与我司相关人员沟通。
Notes: dierent input voltage range, dierent application environ-
ment, dierent external heat dissipation design and other factors,
which will lead to a ceain dierence in the temperature rise of the
case. In any of the above application conditions, the temperature of
the actual case (Tc) must be less than 90℃, and this reduction cue
can be established. If there is any doubt about the actual application
environment, please contact the relevant personnel in time.
调光输入:附加电压 Dimming input: additional voltage
备注: 1. Dim+和 Dim-不能接到 Vo+, Vo- 2. 不用调光时，Dim+和 Dim-应该悬空
Remarks: 1. Noted: Dim+ and Dim- signals can’t be connected to Vo+, Vo-;
2. If the dimming function is not used, the Dim+ and Dim- signals should be suspended.
25
0
15
30
45
60
75
90
105
120
135
150
Life Time
TC
Khrs
Lx(Tc)
30 35 40 45 50 55 60 65 70 75 80 85 90
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
Iout/Iset 0-10V Dimming
1 2345678910
黑色/Black L 红色/Red VO+
黑白色/Black White Aux
紫色/Purple DIM+
粉色/Pink DIM-
LED 模组 Module
AUX Load
0-10V Dimmer
R
10V PWM
LED Driver
白色/White N 黑色/Black VO-
绿色/Green PE
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
变更履历表 Version histo
版本 Version日期 Date
V002022.03.23
制作：审核： 批准：
变更内容描述 Content
首次发行 First issue
变更日期 Change Date 备注 Remark
调光输入：附加 PWM Dimming input: additional PWM
1. 驱动器应远离热源和易燃易爆物品。
2. 应将驱动程序安装在通风良好的散热空间内,
实际使用中应考虑最极端情况下,驱动器外壳温
度不 超过安全壳温。
3. 带高压！请不要在带电工作的情况下打开,
非专业电工人员不得进行接线等各项操作。
4. 确保输入/输出电线接头完全密封防水,以防
触电和漏电,使用中需要注意接线方式所引起的
阻抗不 能影响驱动器正常工作。
5. 产品寿命与产品温度有直接关系,请参照寿命
温度曲线评估产品的适用性。
6. 实际应用中前级保护器请注意输入浪涌的承
受能力。
7. 非隔离电源实际应用中需要注意灯板 LED 芯
片&走线与外壳的避距。
1. The driver should be kept away from heat source and inammable or explosive
materials.
2. The driver should be installed in open space. In actual application, Tc temperature
should not exceed the max allowed temperature(89℃) in the most extreme condition.
3. With high voltage danger! Please don’t check under the condition of live working.
Only professional electricians may car out wiring and other operations.
4. Ensure that the input / output wires joint are completely sealed and waterproof-treat-
ed if required to prevent electric shock and leakage. The impedance caused by the
connection mode in the application should not aect the normal function of the driver.
5. The driver lifespan is directly related to the driver working temperature. Please refer to
the life&temperature cue to evaluate the applicability of the driver.
6. In practical application, please pay attention to the surge capacity of the front
protector.
7. Pay attention to distance between wire & LED and the heatsink in practical application
of non-isolated driver.
Attention
注意事项
10V PWM Dimming
Iout/Iset
10%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
20% 30% 40% 50% 60% 70% 80% 90% 100%0%
!!
夏勇
Tel:0769-82391969Mail:inf[email protected] 制造基地:东莞市寮步镇松湖智谷产业园C1栋13楼
ES-RND080C系列 LED驱动电源
V012023.04.04 更新TC点位置
V022023.05.18 外壳更新
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
