ES-RND150C

HAISEN ES-RND150C インストールガイド

  • Haisen Espiton ES-RND160C シリーズLED工鉱灯電源の仕様書について、ご質問にお答えします。この文書には、電源の性能パラメータ、保護機能、接続図、寸法図などが記載されています。効率、調光機能、安全性に関する情報など、ご不明な点があればお気軽にご質問ください。
  • この電源の入力電圧範囲は何ですか?
    調光方法は?
    この電源の保護機能は何ですか?
    補助電源出力は何ですか?
    保証期間は?
品规格
SPECIFICATION
ES-RND160C 系列电源
UFO Highbay Driver
机型称 Model NoES-RND160CD-0800BX-U0-02-P 系列LED驱动电
概述 Description150W 工矿灯电源 150W UFO Highbay Driver
Version:V02
发行期 Released On2023-05-18
ES-RND160 0-10V调光系列为150W圆形非隔离恒流驱动产品此系列产品针对LED照明设计主要应用领域为工矿照明
超高的效率,良好的散热结构,极大提高了产品的可靠性具有短路/过温/过压保护功能使驱动电源产品寿命大大提高。
ES-RND160 0-10V Dimming series, is a 150W round non-isolated power driver with constant current. The
series is specially designed for LED industrial lighting, supplies with high eciency, appropriate heat radia-
tion design and all-around protection of OTP, OVP and SCP, highly improved its reliability and lifespan.
产品描
◆ High Eciency(Up to 94%)
◆ Two Stage Design, Flicker-Free
◆ With Active PFC For High PF/ Low THD
◆ Isolated dimming:0-10V PWM,Resistor
◆ With Auxilia Power for 12V/200mA
◆ Surge Protection: L-N:4KV, L/N-PE:6KV
◆ All-Around Protection:OTP, OVP, SCP
◆ Five-year warranty
产品特
ES-RND160C 150W 工矿灯电150W UFO Highbay Driver 150W LED High Bay Driver
Features
Description
型号Description
超 高 功 率 密 度 ,效 率 高 达 9 4 %
构 ,无
内置有源PFC,实现高PF/低THD
隔离调光0-10V PWM 电阻
辅助电源功能12V/200mA
雷击保L-N(差模)4KV L/N-PE(共模)6KV
方 位 护 :过 / /
五年质保
ES-RND160C-0800
A √
B
D
√ √
调功率 色温 感应器底
A √
B
BX
√ √
非调光 0-10V12V
Wattage Adjusting CCT Tuning Receptacle for Sensor Non-Dimming 0-10V 3-in-1 Dimming With Auxiliary Output
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
最高出电
Output voltage
350Vdc Max@no load)
180-260Vdc
输出电流可调范围 (AOC)
Output current adjustable range 0.5-0.8A
出电
Rated Output current (0.61A@260V;0.8A@200V)
出电
Rated Output voltage 180V Min ,260V Max (Po=Vo*Io=150W,full load)
满功率输出电压范围
Full power output voltage 200-260Vdc
率( T y p .
E c i e n c y( T y p . ) 92%@120Vac/95%@230Vac/95%@277Vac,full load@260Vdc
输入功率
Input power Max 175W,@25℃,120Vac 260Vdc
入电
Input current 2.0Arms Max
待机功率
Stand-by power 0.5W @220Vac
额定:100-277Vac 极限:90-305Vac参照降额曲线
Rated:100-277Vac Extreme:90-305VacRefer to the reduction cue
输入电压范围
Input voltage range
频率范围
Frequency range 47-63Hz
浪涌电
Inrush current(Typ.) 100A @230Vac, Ta=25℃, 冷启动 cold sta
漏电流
Leakage current <0.75mA @ 277Vac
过压保护
Over voltage protection
式 ,过 除 可
Hiccup mode, recovers automatically after
voltage fault condition is removed
短路保护
Sho circuit protection
式 ,负 可 自
Hiccup mode, recovers automatically after
load fault condition is removed
过温保
Over temperature
功率降额温度下降后恢复满载
Power derating, recovers automatically
after fault condition is removed
总谐波失
Total harmonic distoion
THD≤10%,@230Vac,full load; 具体请参波失真曲线
THD≤10%,@230Vac,full load;
Please refer to: total harmonic distoion waveform
功率因素(Typ.)
Frequency range PF≥0.99@120Vac, PF≥0.95@230Vac, PF≥0.95@277Vac,@full load,47-63Hz;
Other load conditions, please refer to power factor cue
电流精度
Accuracy current ±5%
启动时间
Staup time
120Vac <1S @满230Vac <0.5S@满载
PF≥0.99@120Vac, PF≥0.95@230Vac, PF≥0.95@277Vac,
@满负荷47-63Hz;其他负载情况,考功率因数曲线
性能参Peormance Parameters
输出
Output
输入
Input
保护
Protection
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
120Vac <1S @Full load;230Vac <0.5S@Full load
调光概述 Dimming General Specications
参数 Parameters
0-10V 调光线电压范围
0-10V Dimming wire voltage range
0-10V 调光线电流范围
0-10V Dimming wire current range
推荐调光输入范围
Dimming wire range recommendation
最小值 Min
0V
100uA
0V -
+12V
300uA
10V
-
-
500Hz
TBD
0V
-
PWM 高电平 PWM high level -
PWM 低电平 PWM low level
10V
10V
255uA
-TBD
-
PWM 频率范围
PWM frequency range 3KHz
10% -
PWM 占空PWM propoion 100%
电阻范围 Resistance range
典型值 Typical Value 大值 Max 备注 Remarks
境温度
Environmental temperature
Ta-40~55℃体请参考负载与温度曲线
Ta:-40~55please refer to load VS temperature cue
作壳温 Ambient temp T c :- 4 0 ~ 9 0
作湿度 Working humidity 1095% RH,无冷凝 no condensation
储存温度和湿度
Storage temp. and humidity -40+85℃, 595% RH
振动保护 Vibration protection 沿着 X, Y, Z 轴 10 ~ 500 hz, 5 g 12 分钟/周期循环 72 分钟
10500Hz, 5G 12min./cycle, period for 72min. Each along X, Y, Z axes
安规标准 Safety standard IEC/EN61347-1(GB19510-1-2009), IEC/EN61347-2-13(GB 19510.14-2009),
UL8750, CSA C22.2 NO. 250.13-12;IP65 approved
耐电压 Withstand voltage
Input-Aux:3KVac,Output-Aux:3KVac, Input-PE:1.5KVac,
Output-PE:1.5KVac
绝缘电阻 Insulated resistance I/P-PE,O/P-PE>100M Ohm/500VDC/25℃/70%RH
MTBF ≥200KhrsMIL-HDBK-217F(25℃)
重量/尺寸 Weight/Size 0.78Kg/详见机械数据 0.78Kg/See mechanical data for details
谐波电流 Harmonic current
EMI
环境保
Environmental protection 干燥、潮湿或下雨场所IP65 UL D, Damp or Wet Location, IP65
EN55015 , FCC PART15-CLASSB
EN61000-3-2 Class C
雷击保护 Surge protection L/N-PE:6KV,L-N:4KV
EMS EN61000-4-2,3,4,5,6,8,11; EN61547 Indust standard
环境
Environment
其他
Others
安规和
电磁兼容
Safety &
EMC
壳体颜色 Case color 黑色 Black
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
接线图 Wiring diagram
电气Electrical block diagram
黑色/Black L 色/Red V+
黑白/Black White Aux
紫色/Purple DIM+
粉色/Pink DIM-
LED 模组 Module
AUX Load
0-10V Dimmer
R
10V PWM
LED Driver
白色/White N
黑色/Black V1- 3K
绿色/Green PE
FG
EMI lter &
Inrush CKT APFC Non- isolated
power stage
VO+
VO-
OTP
OVP
SCP
Aux 12V
DIM+
DIM-
备注考线Remarks(Refer to the wire
CE/CB/SAA/CCC 版本为 L/棕色N/蓝色,G/黄绿,V+/棕色,V-/蓝色,Aux 12V 黑白色DIM+/紫色DIM-/粉色;
UL 版本为 L/色,N/白色,G/绿色,V+/红色,V-/黑色,V-/白色,Aux 12V/黑白色,DIM+/色,DIM-/
CE/CB/SAA/CCC version: L/brown ,N/blue,G/yellow-green,V+/brown,V-/blueAux 12V/Black white,DIM+/purpleDIM-/Pink;
UL version: L/black,N/whiteG/greenV+/redV-/blackV-/White,Aux 12V/Black whiteDIM+/purpleDIM-/Pink.
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
白色/White V2- 5K
尺寸Mechanical size 电源机构图
单位 Unit:mm
Ta: 环境温度测试点
Ambient temperature measured point
Tc:外壳温度测试点
Max case temperature Case temperature point
电源机构图
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
A
B
Y
X
E
Mounting Screw Diameter
House Diameter
TC Point Position
TC Point Position
Mounting Size
Ø7(0.27)
129(5.07)
CRing Fixed Hold M4*0.7
DHold Hole(Depth) 18(0.7)
20(0.15)
20(0.15)
113(4.44)
Standard Code mm(In.)Name Description
输出线
Output wire
E
A
C
D
B
输入线
Input wire X
TC
调功率
调电流 调色温
Wattage Adjusting
Current Ajustable CCT Tuning
Ta
45°
150
300±20
SJTW 18AWGX3C
L
N
PE
200±20
48
138
60.3
SVT 18AWGX3C
V-
V2-
V+
电压与输电流(Dim/AOC 窗) Output Voltage Vs. Output Current (Dim/AOC Window)
输出电压与效率(Vin=120Vac) Eciency Vs. Output Voltage (Vin=120Vac)
效率与输电压(Vin=230Vac) Eciency Vs. Output Voltage (Vin=230Vac)
0
270V
260V
250V
240V
230V
220V
210V
200V
190V
180V
170V
Output Current (mA)
Dimming Windows AOC Windows
Output Voltage (V)
100 200 300 400 500 600 700 800 900 1000 1100
Eciency Vs. Output Voltage (Vin=120Vac)
Output Voltage (V)
170
88.00%
89.00%
90.00%
91.00%
92.00%
93.00%
94.00%
95.00%
96.00%
97.00%
98.00%
180 190 200 210 220 230 240 250 260 270
Io=610mA
Eciency(%)
Output Voltage (V) Io=610mA
Eciency(%)
Eciency Vs. Output Voltage (Vin=230Vac)
170
88.00%
89.00%
90.00%
91.00%
92.00%
93.00%
94.00%
95.00%
96.00%
97.00%
98.00%
180 190 200 210 220 230 240 250 260 270
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
功率因数与输出功率 Power Factor Vs. Output Power
总谐波失真(THD)与输出功率 Total harmonic distoion (THD) Vs. Output Power
出电(Vin=277Vac) Eciency Vs. Output Voltage (Vin=277Vac)
Output Voltage (V) Io=610mA
Eciency(%)
Eciency Vs. Output Voltage (Vin=277Vac)
170
88.00%
89.00%
90.00%
91.00%
92.00%
93.00%
94.00%
95.00%
96.00%
97.00%
98.00%
180 190 200 210 220 230 240 250 260 270
Eciency(%)
Power Factor Vs. Output Power
Output Power(%)
60
0.800
0.820
0.840
0.860
0.880
0.920
0.900
0.940
0.960
0.980
1.000
65 70 75 80 85 90 95 100
Vin=120Vac Vin=230Vac Vin=277Vac
2.00%
4.00%
6.00%
8.00%
10.00%
12.00%
14.00%
16.00%
18.00%
60 65 70 75 80 85 90 95 100
THD Vs. Output Power
Output Power(%)
THD (%)
Vin=120Vac Vin=230Vac Vin=277Vac
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
负载与 Ta环温)额曲线 Derating waveform of Load VS Ta
备注:
1. 输入压低于 100Vac 时需降额,输入电压为 90Vac 时需降额至 80%负载;
2.载与环境温度的降额曲线境温度是指电源周围的温度
Notes:
1. Derating is required when the input voltage is lower than 100Vac, and derating to 80%Load when input voltage is 90Vac;
2. The derating cue of the load and the ambient temperature, ambient temperature means the temperature around the power supply.
功率降额曲线 Power derating waveform
80
40%
60%
80%
100%
120%
100 120 140 160 180 100 200 240 260 280 305
Load-Vin(V)
Load
-40
0%
20%
40%
60%
80%
100%
120%
-35 -30 -25 -20 -15 -10 -5 0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
120V
230V
277V
Ta
Load
Load-Ta
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
色/Red V+
黑色/Black V1- 3K
白色/White V2- 5K
寿命曲线 (120VAC/230VAC 输入/Full load) Lifetime waveform (120VAC/230VAC input/Full load)
调光 Dimming
注:由于存在不同的输电压范围、不同的应用环境、不同的外部散热
计等不定性因素会导致外壳温升 定的差异。在以上任何应用条件
必须满足驱动器外壳温(Tc) 90℃此降额曲线方可成立
客户对 实际应用环境存有疑问请及时与我司相关人员沟通。
Notes: dierent input voltage range, dierent application environ-
ment, dierent external heat dissipation design and other factors,
which will lead to a ceain dierence in the temperature rise of the
case. In any of the above application conditions, the temperature of
the actual case (Tc) must be less than 90℃, and this reduction cue
can be established. If there is any doubt about the actual application
environment, please contact the relevant personnel in time.
调光输入:附加电压 Dimming input: additional voltage
备注: 1. Dim+和 Dim-不能接到 Vo+, Vo- 2. 不用调光时Dim+和 Dim-应该悬
Remarks: 1. Noted: Dim+ and Dim- signals can’t be connected to Vo+, Vo-;
2. If the dimming function is not used, the Dim+ and Dim- signals should be suspended.
25
0
15
30
45
60
75
90
105
120
135
150
Life Time
TC
Khrs
Lx(Tc)
30 35 40 45 50 55 60 65 70 75 80 85 90
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
Iout/Iset 0-10V Dimming
1 2345678910
黑色/Black L
黑白/Black White Aux
紫色/Purple DIM+
粉色/Pink DIM-
LED 模组 Module
AUX Load
0-10V Dimmer
R
10V PWM
LED Driver
白色/White N
绿色/Green PE
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
历表 Version histo
版本 Version日期 Date
V002022.10.08
作:核: 批准:
更内容描Content
首次First issue
更日期 Change Date 备注 Remark
调光输附加 PWM Dimming input: additional PWM
1. 驱动器应远离热源和易燃易爆物品。
2. 应将驱动序安装风良好的散空间内,
实际使用应考虑最极端情况,驱动器外壳温
度不 超过安全壳温。
3. 带高压!请不要在带电工作的情况下打开,
非专业电工人员不得进行接线等各项操作
4. 确保输入/输出电线接头完全密封防水,以防
触电和漏电,使用中需要注意接线方式所引起的
阻抗不 能影响驱动器正常工作
5. 产品寿命与产品温度有接关,请参照寿命
度曲线评估产品的适用性。
6. 实际应用中前级保护器请注意输入浪涌的承
力。
7. 非隔离电源实际应用中要注意灯板 LED 芯
片&线
1. The driver should be kept away from heat source and inammable or explosive
materials.
2. The driver should be installed in open space. In actual application, Tc temperature
should not exceed the max allowed temperature(89℃) in the most extreme condition.
3. With high voltage danger! Please don’t check under the condition of live working.
Only professional electricians may carout wiring and other operations.
4. Ensure that the input / output wires joint are completely sealed and waterproof-treat-
ed if required to prevent electric shock and leakage. The impedance caused by the
connection mode in the application should not aect the normal function of the driver.
5. The driver lifespan is directly related to the driver working temperature. Please refer to
the life&temperature cue to evaluate the applicability of the driver.
6. In practical application, please pay attention to the surge capacity of the front
protector.
7. Pay attention to distance between wire & LED and the heatsink in practical application
of non-isolated driver.
Attention
意事
10V PWM Dimming
Iout/Iset
10%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
20% 30% 40% 50% 60% 70% 80% 90% 100%0%
!!
夏勇
Tel:0769-82391969Mail:inf[email protected] 制造基:东莞市寮步镇湖智谷产业园C1栋13楼
ES-RND160C系列 LED驱动电
V012023.04.04 TC点位置
V022023.05.18 外壳更
/